Used High Pressure Cleaning for sale (33,437)

Year of construction: 2025, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1 to 80 bar Hodpof A Nqqofx Al Tenr Tank volume: 75 liters / heating power 2 kW Standard version: • Blow gun inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring support • Door opening monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • External mini pneumatic oil separator

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW Hedpfx Ajhy Nx Esl Tsnr 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Mass: Hnodpfx Asticdlsl Ter 350

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg Hodpowr Ul Sjfx Al Tenr If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, - Power generator Low operating costs: Hnjdpjwmln Tefx Al Tjr - 3.5 t permissible gross vehicle weight for the chassis, - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request.

Condition: used, operating hours: 638 h, High-pressure air/nitrogen compressor for sale – EFCO Maschinenbau GmbH BOE 100/200 booster. The compressor is used, fully operational. Currently connected – inspection and testing on site are possible. Designed for compressing air or nitrogen up to a pressure of 200 bar. Suitable for pressure testing, industrial processes, valve testing systems, and other high-pressure applications. Specifications: Model: EFCO BOE 100/200 Maximum working pressure: 200 bar Tank capacity: 2 x 50 l (100 l total) Electric drive – 400 VAC Suitable for air and nitrogen compression Automatic shutdown upon reaching maximum pressure Automatic start when pressure drops Simple and convenient operation Hnjdjy R Nnropfx Al Tor Filling time from 0 to 200 bar (2900 psi): approx. 2.5 hours Operating hours: 638 h German-made, professional, industrial-grade equipment. If you have further questions, we will be happy to answer them.

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations Hsdpfxoytgvwe Al Tonr 2 identical units available.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. Hodpfx Alorhidms Tsnr After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Jaw width: 125 mm Hnsdpfx Aou Sh Husl Tsr Clamping width: 220 mm

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Hedpfxeyxmmzj Al Tenr Pump, reducer, main motor of 37 kW, flush valve are overhauled. H2O Jet intensifier 60K 301001-1-R.

Condition: used, Year of construction: 2018, operating hours: 806 h, functionality: fully functional, total width: 2,030 mm, total length: 4,450 mm, total height: 2,090 mm, pressure: 3,000 bar, operating pressure: 3,000 bar, fuel: diesel, overall weight: 2,925 kg, water tank capacity: 150 l, volume flow: 1.08 m³/h, fuel tank capacity: 200 l, type of cooling: air, noise level: 85 dB, power: 144 kW (195.79 HP), year of last overhaul: 2026, pump capacity: 18 l/min, Equipment: rotational speed infinitely variable, type plate available, Complete unit in mobile design with soundproof enclosure + accessories, consisting of: (€7,500) 5x hose DN8-20m-3010bar-2x9/16-LH-S 6x complete connector set 9/16 4000 BAR 1x hose DN8-10m-3010bar-2x9/16-LH 1x hose DN5-5m-3010bar-9/16UNF-LH Hnodpfx Ajx Svnbjl Tor 1x compressed air line DIN10, 20m 1x high-pressure gun HP3000S-E-24V incl. body support and DSA 1x Speedy 3000 1x Orbimaster 2500 0.80-9/16-18UNF LH 1x rotary union TD3000-SCS-9/16 1x plug-in foot switch, 2-channel, 24VDC 2x cable drum with cable, 50m 2x bursting disc, operating pressure 3000bar 10x filter cartridge 1µm various nozzles

Condition: used, Year of construction: 1990, operating hours: 9,500 h, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 2,000 l, fuel tank capacity: 600 l, water pressure: 1,000 bar, pump capacity: 130 l/min, We offer this used Woma 325ZP30 high-pressure water jet in isotermic container, year of construction 1990. It could be sell separetaly without container. Hedpfxeyu Imte Al Tsnr If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Heavy duty high pressure washer. Hedsh Rkilspfx Al Tonr Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available.

Year of construction: 2026, condition: new, machine/vehicle number: 12134, Teljesítmény: 1000 L/óra, 7,5 kW Maximum hőmérséklet: 90 °C Feszültség: 400 V Méret: 1300x1600x1500 mm Súly:1000 kg FBF 1000 High pressure homogeniser Specification: Capacity: 1000 L/h 7,5 kW Maximum temperature: 90 °C Two homogenizing phase: 1.: 200 bar, 2.: 50 bar Feeding pressure requested: 2 bar Voltage: 400 V Consumption of water: 70-90 L/h Consumption of air: 5 bar, 0,3 Nl/minute Gross size: 1300x1600x1500 mm Gross weight:1000 kg Compression head and valve: - milled from one block - high pressure resistant pistons - vibration-free Structure: - vibration free pump - power transmission through „V” belts, 1:2 - automatic oil lubrication with oil level indicator Accessories: - wearing part set - tools - oil FBF 1000 Hochdruckhomogenisator - Leistung: 1000 L / h 7,5 kW - Maximale Betriebstemperatur: 90 ° C. Hnodpeiu Hyzsfx Al Tjr - Zweistufige Homogenisierung: 1 .: 200 bar, 2 .: 50 bar - Versorgungsdruck mindestens 2 bar - Stromspannung: 400V - Wasserbedarf: 70-90 L / h - Luftverbrauch: 5 bar, 0,3 Nl / min Kompressionskopf und Ventil: - Ein Block, der mit einer CNC-gesteuerten Maschine aus einem Block gefräst wurde, mit 5 Jahren Garantie. - Kolben aus speziell gehärtetem Edelstahl. - Energie- und kostengünstige Ventile sorgen aufgrund ihrer hohen Stabilität für einen vibrationsfreien Betrieb. Struktur: - Pumpe aus hochwertigem vibrationsfreiem Gusseisen - Die Übertragung erfolgt auf "Keilriemen" mit Doppelübertragung - 3-phasiger 4-poliger Motor - Ölgeschmiertes Gehäuse mit Ölstandsfenster Zubehör: - Verschleißteilset - Werkzeuge für die Wartung - Schmieröl - Anweisungen

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Teljesítmény: 300 L/óra, 4 kW Maximum hőmérséklet: 90 °C Feszültség: 400 V Méret: 850 x 1150 x 920 mm Súly: 365 kg FBF 1000 High pressure homogeniser Specification: Capacity: 300 L/h , 4 kW Maximum temperature: 90 °C Two homogenizing phase: 1.: 200 bar, 2.: 50 bar Feeding pressure requested: 2 bar Voltage: 400 V Consumption of water: 60 L/h Hjdpfx Asiu Hypjl Tonr Consumption of air: 5 bar, 0,3 Nl/minute Gross size: 850 x 1150 x 920 mm Gross weight: 365 kg Compression head and valve: - milled from one block - high pressure resistant pistons - vibration-free Structure: - vibration free pump - power transmission through „V” belts, 1:2 - automatic oil lubrication with oil level indicator Accessories: - wearing part set - tools - oil FBF 1000 Hochdruckhomogenisator - Leistung: 300 L / h 4 kW - Maximale Betriebstemperatur: 90 ° C. - Zweistufige Homogenisierung: 1 .: 200 bar, 2 .: 50 bar - Versorgungsdruck mindestens 2 bar - Stromspannung: 400V - Wasserbedarf: 60 L / h - Luftverbrauch: 5 bar, 0,3 Nl / min - Gewicht: 365 kg - Abmessungen: 850 x 1150 x 920 mm Kompressionskopf und Ventil: - Ein Block, der mit einer CNC-gesteuerten Maschine aus einem Block gefräst wurde, mit 5 Jahren Garantie. - Kolben aus speziell gehärtetem Edelstahl. - Energie- und kostengünstige Ventile sorgen aufgrund ihrer hohen Stabilität für einen vibrationsfreien Betrieb. Struktur: - Pumpe aus hochwertigem vibrationsfreiem Gusseisen - Die Übertragung erfolgt auf "Keilriemen" mit Doppelübertragung - 3-phasiger 4-poliger Motor - Ölgeschmiertes Gehäuse mit Ölstandsfenster Zubehör: - Verschleißteilset - Werkzeuge für die Wartung - Schmieröl - Anweisungen

Condition: used, Vacuum pump, rotary vane pump, sliding vane pump, vacuum pump, cleanroom pump BECKER Type VX 4.40 High Vacuum Pump Serial No.: 2583674 Year of manufacture: 2011 Capacity: 40 m³/h Vacuum: -0.8 bar (determined during test run) Vacuum: -0.9 bar (manufacturer's specification) Suction connection: G 3/4" Hnedpfx Aljzrzyas Tsr Motor speed: 1420 rpm Motor power: 1.25 kW Power connection: 400 Volt, 50 Hz - dry-running, oil-free rotary vane vacuum pump - sound insulation made of polystyrene (Styrofoam) Dimensions with sound insulation housing L x W x H: 820 x 460 x 350 mm Dimensions without sound insulation housing L x W x H: 540 x 250 x 280 mm Weight: 45 kg Very good condition

Condition: good (used), Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Hodpfjwy Ellsx Al Tjnr

Condition: used, Year of manufacture 2007 Connection 400 V 16 A CEE 5.5 kW 630 m³/h Hnsdpfx Aljy Ec T Dj Tjr Functional video available.

Condition: like new (used), Falch Trail Jet 15, 300 bar, 24 l/min, 305 operating hours Hnjdpfxswlkruj Al Tor

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Hjdpfx Aewz Scaol Tjnr

Condition: good (used), Year of construction: 2021, REF: MM6468 Hnodpfx Alszn Rbfo Tsr 1 x MKN FlexiChef 150L high-performance multifunctional cooking pan. Suitable for soups, stews, ready meals, meat, fish, rice and pasta, bakery and confectionery products. Manufacturer - MKN Maschinenfabrik Kurt Neubauer GmbH & Co KG. Type - FCEKMP133DR-G20037. Serial number – 21542551. Date of manufacture – 2021. Electrical requirements - 380-415 V / 50 hz / 3 phase. Power - 34 kW. Water pressure - 200-600 kPa. Overall dimensions - 1600mm long x 910mm wide x 1020mm high. Machine weight - 390 kg.

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone. Hnsdpfxjzimamj Al Tjr

Condition: used, Year of construction: 2013, total height: 2,220 mm, total length: 6,100 mm, total width: 2,350 mm, Colour: Grey Weight: 6.000 kg Horizontal band saw machine High point HP-400 Hnsdpownhn Esfx Al Tsr Year of construction 2013 Serial number 213-051 Saw wheel diameter 860 mm Maximum cutting width 400 mm Motor 22kW (30hp) (Per piece!) Conveyor belt in poor condition. - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 213-051 - Transport dimensions: 6100mm x 2350mm x 2220mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 311,000 km, power: 120 kW (163.15 HP), first registration: 03/2013, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Manufacturer Mercedes Model Sprinter 316 CDI Rioned Spulebil Year 2013 Condition Good Serial Number WDB9066331S755439 Ref. nr. 1248109 Reg. date: 19-09-2013 Last seen: Engine: 2,2 CDI Hk: 160 Km: 311000 Gearbox: Automatic Eurotype: 5 Diesel tank: 1 Tank liter: 100 L Cabin heater: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Tire Size: 235/65R16 Cover% left 60% 50% Front suspension: Springs Suspension rear: Springs Total weight: 3500 kg Net weight: 2238 Kg Load capacity 1262 Kg Manufacturer: Rioned High pressure pump: Rioned P-45 SP-617 High pressure capacity: 85 l/min - 150 Bar Hnjdpfx Asyyt I Uol Tsr High pressure pump hours: 3126 Remote control: ?

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Hodpfx Ajzkkc Usl Tonr Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included