Used Herma for sale (1,432)

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Hfjdjun Ruljpfx Ah Hep Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M2019011975, cooling capacity: 430 kW (584.64 HP), type of input current: three-phase, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, Carrier Chiller 30RBP-430-0095-PE (AquaSnap Series) Hfsdsxb D Raspfx Ah Hep Type: Air-Cooled Liquid Chiller Model: 30RBP-430-0095-PE Variant: 30RBM/RBP Serial Number: M2019011975 Year of Manufacture & Test: 06/2019 Manufacturer: Carrier SCS, Montluel, France (United Technologies, Carrier Corporation, USA) Technical Specifications: Nominal Cooling Capacity: 430 kW Refrigerant: R-410A Circuit A: 23.50 kg / Circuit B: 26.70 kg Total Charge: 50.2 kg GWP: 2088 Compressors: Danfoss Scroll SH240A4ACE (thermally protected) Power Supply: 400 V / 3 Ph / 50 Hz Maximum Current Draw: 340 A Maximum Starting Current: 210 A Power Input: 210 kW Operating Temperature Range: –20 °C to +52 °C Net Weight: 2760 kg Protection Rating: IP54 Pressure Data Refrigerant: R-410A Allowable Pressure (Min/Max): High side (PS): –1.0 / 44.2 bar (–99.0 / 4420.0 kPa) Low side (PS): –1.0 / 31.1 bar (–99.0 / 3110.0 kPa) Safety Relief Valve Setting: 42 bar Rupture Disc Setting: 45 bar Test Pressure: 15.0 bar (unit leak test) Additional Information: Air-cooled design with axial fans and integrated condensers. Electrical control panel with Carrier management system. Hermetically sealed system, original Carrier service log included. Serviced and maintained by official Carrier service centre.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Hfedpfx Aow Hxuaoh Hjp Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: excellent (used), mileage: 7,927 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, first registration: 03/2025, fuel tank capacity: 70 l, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, = Additional Options and Accessories = - 7 inch touchscreen - 12 Volt socket - Alarm system - Anti-slip regulation (ASR) - Rear work lights - Front work lights - Attention assist Hodpfxexvmd Es Ah Hefp - Outside temperature display - Heated mirrors - Heated side mirrors - Passenger bench seat - Passenger seat - Cargo area lighting - Hill start assist - Bluetooth - DAB radio - Third brake light - ECO start-stop system - Electric windows - Electric front windows - Electrically adjustable exterior mirrors - Trailer electrical connector - Electronic parking brake - Electronic braking system (EBS) - Entry step on rear bumper - EURO 6 - Driver airbag - Remote central locking - Enclosed cab - Height-adjustable steering wheel - Wireless smartphone charging - Cab - Air conditioning - Comfort package cab - Emergency call system - Radio - Radio/CD player - Reversing camera - Lane keeping assist - Stability control - Thermal insulation glass - Blind spot assist - USB port - Warming automatic - Floor mats - Twin rear doors - Bulkhead without window = Additional Information = General Information Number of doors: 5 Cab type: Single Technical Information Engine displacement: 1,950 cc AdBlue system: Yes Transmission: 9-speed automatic GVW: 2,800 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Maintenance, History, and Condition APK (German MOT): New inspection upon delivery Technical condition: Very good Visual condition: Very good Warranty Warranty: 12 months Further Information Please contact Lorenz Schoutteet for more information.

Condition: used, - Brand: Wachtel - Model: Compact 1.8 - Type: Professional rotary rack oven, gas-fired - Energy: Natural gas – integrated burner - Category: Rotary rack bakery oven - Capacity: 1 rack – 18 trays (600×800 mm) - Output: Up to 180 baguettes per batch - Racks not included - Construction: Stainless steel, double thermal insulation - Controls: Programmable electronic panel - Integrated steam system - Max. temperature: 300 °C - External dimensions: 198×178×255 cm - Tray size: 60×80 cm - Voltage: 230 / 400 V three-phase – 50 Hz - Power: 6 kW - Year: 2007 - Net weight: approx. 2,200 kg - Condition: Used – excellent working condition Wachtel Compact 1.8 Rotary Rack Oven – Used (2007) – High-performance professional gas bakery oven General Description The Wachtel Compact 1.8 Rotary Rack Oven – Used (2007) is a professional gas-fired rack oven from renowned German manufacturer Wachtel, known for top-quality rotary rack bakery ovens. Designed for even, rapid, and energy-efficient baking, this model combines performance, durability, and precision for high-output bakeries, patisseries, and production facilities. Key Features - Cost-effective gas heating: Integrated burner for fast, consistent heating - High capacity: Up to 180 baguettes per batch on rotary rack Hfjdpfx Ahsxwni Sj Hsp - Uniform baking with controlled air flow convection system - Steam injection system for glossy, crisp crusts - Stainless steel construction with double thermal insulation for optimal energy efficiency - Programmable controls for precise management of time, temperature, and steam - Compact design fits easily into all types of production facilities - German engineering: Proven reliability and durability Capacity: 1 rack – 18 trays (600×800 mm) Baking tray size: 60×80 cm Output: 144 to 180 baguettes per batch Baking system: Forced convection + integrated steam Max. temperature: 300 °C Controls: Programmable electronic panel Construction: Stainless steel with double thermal insulation External dimensions (W×D×H): 198 × 178 × 255 cm Power supply: 230 / 400 V three-phase – 50 Hz Power: 6 kW Net weight: Approx. 2,200 kg Rack(s): Not included Condition: Used – excellent, tested and fully operational Location: Western and Northern Europe Applications The Wachtel Compact 1.8 is ideal for baking bread, baguettes, brioches, viennoiseries, and snack products. Its robust design and rotary convection baking ensure consistent results, while the integrated steam system enhances visual appeal and product quality. It is the perfect choice for artisanal bakeries and high-throughput production sites seeking to combine productivity with consistency. Conclusion Compact, powerful, and reliable, the Wachtel Compact 1.8 rotary rack oven (2007) is the ideal solution for demanding bakery professionals. With its gas burner, stainless steel construction, and precise electronic control, it ensures even and energy-efficient baking for continuous, long-term production.

Condition: excellent (used), REF: MM6263 Complete weighing and packing system, previously used to pack various types of nuts. This system was used for weighing and producing pillow packs and block-bottom packs in 500g and 1kg sizes. This system comprises of the following equipment: 1 x Set of stainless-steel steps. 1 x Deamco stainless-steel guarded hopper on frame with height-adjustable feet. Serial number - 1339. 1 x Riley Automation variable speed vibratory feeder fitted with perforated pan measuring 215mm wide. 1 x Gough Engineering bucket elevator with 200mm wide buckets. 1 x Riley Automation ISF-2 vibratory feeder fitted with a smooth pan. 1 x Ishida 14-head weigher with smooth pans. Model - CCW-EM-214/30. Serial Number - 552130. Date of manufacture -2002. 1 x Painted steel gantry with steps. 1 x Ilapak vertical form, fill and seal bagging machine with updated touch-screen control and supplied with 5 x forming tubes. Model- VT 2000 / 400 S. Serial Number - S977/00. Sealing jaws - Vertical: 430mm & Horizontal: 400mm. 1 x ICE Zodiac Hawk printer. Serial Number - 1927013012TZH. 1 x Herma printer. Model - H400 16R. Serial number - 20314483. 1 x Outfeed inclined conveyor. Belt dimensions -1700mm long x 350mm wide. Hjdsxrk Tpspfx Ah Hefp 1 x Ishida DACS combination metal detector checkweigher. Model - DACS-W-012-SB-PB-I. Date of manufacture - 2002. Serial number - 552424. 1 x Outfeed inclined conveyor. Belt dimensions -2350mm long x 300mm wide. Infeed height -770mm. Outfeed height - 1040mm high.

Condition: excellent (used), Scholz Hot Air Autoclave SCHOLZ Hot Air Autoclave – modernized in 2019 – Working autoclave with quick-release closure Description: For sale is a SCHOLZ hot air autoclave that underwent extensive modernization between 2019 and 2024. The system is designed for the thermal treatment of materials under overpressure conditions and offers reliable and precise process control thanks to modern control technology and proven SCHOLZ construction. Modernizations carried out: In 2019: - Installation of a new STANGE 604 program controller including control software and data logging - Integration of a new Siemens SIMATIC S7-1500 controller (TIA Portal) - New thermocouple feedthroughs for 12 component temperature sensors, type K - Installation of new thermocouple panels for connecting thermocouples inside the autoclave - New thermocouple feedthroughs for 12 additional sensors for TUS measurement, including terminal panels inside and outside the autoclave In 2023: - Replacement of several control valves for compressed air and cooling water control In 2024: - Installation of a new rotary vane vacuum pump Modernized, well-maintained condition Status: Final version, revision dated 11.09.2019 Technical Data: Hot Air Autoclave System UNI Magdeburg General Information: - Designation: Hot Air Autoclave System - Outer diameter: 1,350 mm - Cylindrical length: 2,300 mm - Loading length: 1,500 mm Dimensions & Weight: - Autoclave L × W × H: 4,000 × 2,200 × 2,200 mm - Autoclave weight: 4,800 kg - Control cabinet L × W × H: 2,400 × 600 × 2,100 mm, weight: 1,200 kg - Silencer L × Ø: 1,300 mm × Ø 168.3 mm, weight: 40 kg - Total system weight: approx. 6,000 kg Electrical Data: - Operating voltage: 400 V AC ±10%, 50 Hz ±1 Hz - Control voltage: 230 V AC / 24 V DC - Power consumption: approx. 68 kW - Current consumption: approx. 120 A Pneumatic Data: - Control air for regulation: 8–10 bar - Max. pressure at autoclave air inlet: 35 bar (before regulating valve group) - Max. dust/particle size: ≤ 3 µm Cooling Water: - Cooling water pressure: 2–6 bar - Cooling water consumption: 8.0 m³/h Performance / Autoclave operation: - Temperature range: 0–400 °C - Max. operating pressure: 20 bar - Test overpressure: 26 bar Loading weight: - Steel racks & carts: max. 60 kg - Composite: approx. 20 kg - Max. temperature increase (20 → 400 °C): 5 °C/min (approx. 76 min) - Max. temperature decrease (400 → 60 °C): 5 °C/min (approx. 68 min) Environment & Emissions: - Operating temperature range: +5 to +40 °C - Max. relative humidity: 90 % - Max. altitude above sea level: 1,000 m - Autoclave noise emission (1 m distance): ≤ 60 dB(A) - Piping system noise emission: ≤ 80 dB(A) - Short-term noise emission of air duct (1 m distance): ≤ 120 dB(A) - Autoclave: 4,800 kg - Control cabinet: 1,200 kg - Silencer: 40 kg - Total weight ≈ 6,040 kg (~6 tons) Hsdpfx Ahoxrt Shj Hsfp Scope of Delivery: - Hot air autoclave including quick-release closure - Heating and cooling system - Air and cooling water distributor - Piping and cabling Note: Missing technical data (e.g., dimensions, weight, performance details) will be provided later. Buyer is responsible for installation and operation. Contact: For inquiries or further questions regarding the system, feel free to contact us. A viewing can be arranged by appointment. (Changes and errors in technical data and details excepted!)

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Hedpfxod Etadj Ah Hofp Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists Hjdpfoxrd Sfox Ah Hsfp suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: excellent (used), mileage: 19,568 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2024, fuel tank capacity: 93 l, CO₂ emissions: 262 g/km, emission class: euro6, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, fog lights, immobilizer system, navigation system, power assisted steering, seat heater, sliding door, = Additional Options and Equipment = - 7-inch touchscreen - 12-volt socket - 360° camera - Alarm system - Traction control (ASR) - Rear work lights - Front work lights - Outside temperature display - Heated mirrors - Heated side mirrors - Passenger airbag Hfodpfxsxvhuls Ah Hjp - Passenger bench - Passenger seat - Cargo area lighting - Bluetooth - Stability class 1 - DAB radio - Third brake light - ECO start-stop system - Electric windows - Front electric windows - Electrically adjustable exterior mirrors - Trailer electrical connection - Rear bumper entry step - EURO 6 - Driver airbag - Remote central locking - Enclosed cab - Cup holders - Height-adjustable driver's seat - Height-adjustable steering wheel - Isofix - Wireless smartphone charging function - Cab comfort package - Front center armrest - Radio - Rear-view camera - Stability control - Thermal insulated glazing - Floor mats - Two rear doors - Partition wall without window = Further Information = General information Number of doors: 5 Cab: single Technical information Engine displacement: 1,950 cc AdBlue system: Yes Transmission: 6-speed manual gearbox Weights Unladen weight: 2,405 kg Payload: 1,095 kg Gross vehicle weight (GVW): 3,500 kg Max. towing capacity: 2,000 kg (unbraked 750 kg) Fuel consumption Average fuel consumption: 9 l/100km Urban fuel consumption: 10 l/100km Extra-urban fuel consumption: 8 l/100km Maintenance Technical inspection (APK/TÜV): New TÜV upon delivery Condition Technical condition: very good Visual condition: very good Damages: none Warranty Warranty: 12 months Further information Please contact Lorenz Schoutteet for more information.

Condition: used, mileage: 61,240 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,100 mm, first registration: 09/2023, fuel tank capacity: 54 l, CO₂ emissions: 146 g/km, emission class: euro6, color: white, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, seat heater, sliding door, traction control, = Additional Options and Equipment = - Right side sliding door - Android Auto - Apple CarPlay - Attention assist - Automatic dipped headlights - Automatically dimming interior rearview mirror - Heated exterior mirrors - Passenger airbag - Front electric windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Hill-hold control - Height-adjustable driver's seat - Height-adjustable steering wheel - Height-adjustable front seats - Wireless charging for mobile devices - Keyless start - Air conditioning - Boot lid - Collision mitigation by braking - LED headlights - Leather steering wheel - Front centre armrest - Multifunction steering wheel - Multimedia capability - Fog lights Hodsxw D Svepfx Ah Hjfp - Emergency brake assist (BA3) - Emergency call system (EY5) - Parking assistance - Rear parking sensors - Front parking sensors - Radio - DAB digital radio - Rain sensor - Reversing camera - Heated seats - Start/stop system - Immobilizer - Body-coloured bumpers - Thermal glazing - Blind spot monitoring - Partition = Further Information = General Information Number of doors: 5 Model range: Jan 2022 – June 2024 Cab type: single Technical Information Torque: 270 Nm Number of cylinders: 4 Engine displacement: 1,461 cc Transmission: 7-speed automatic Acceleration (0–100): 11.7 s Top speed: 175 km/h Dimensions Length/Height: L2H1 Dimensions (L x W x H): 491 x 186 x 184 cm Weights Unladen weight: 1,504 kg Payload: 847 kg gross vehicle weight (GVW): 2,351 kg Max. towing capacity: 1,500 kg (unbraked 750 kg) Interior Interior: black Fuel Consumption Average fuel consumption: 5.6 l/100km Maintenance, History, and Condition Booklets: available APK (roadworthiness inspection): valid until 09/2026 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Year of construction: 2017, condition: used, engine 12 Zylinder cubic capacity 57200 ccm total power requirement 3.438 kW Hfsdpjxwzhbefx Ah Hop Electric capacity 1.516 kw thermal performance 1.425 kW Number of working hours ca. 34.683 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The combined heat and power unit is sold professionally dismantled and free on truck. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Hsdeun Rv Nopfx Ah Hjfp Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Hfsdpfx Ajd Etageh Hop Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, LIEBHERR LK 200 – CNC Gear Skiving Machine Main technical data CNC control: Siemens HMI (Liebherr LHStation / LHMobile operator concept) Max. module: approx. 3.0 mm Max. workpiece diameter: approx. 200 mm Max. workpiece weight: approx. 25 kg Table diameter: approx. 285 mm Axial travel: Axial stroke up to approx. 500 mm Machining stroke / shift distance: approx. 400 mm Max. spindle power: 16 kW Max. workpiece spindle speed: 3,000 min⁻¹ Max. feed rate (radial): 7,500 mm/min Hob / tool speed: up to 4,000 min⁻¹ Max. tool diameter: approx. 150 mm Wet machining Especially for internal gears, wet machining offers major advantages: During the skiving process the cutting edges are cooled and lubricated, which significantly reduces the thermal load on the tools. The chips produced are reliably removed and are not drawn back into the cutting zone. Optimal chip evacuation leads to improved gear accuracy and superior surface quality. LHStation & LHMobile operator concept Liebherr intelligently separates programming and machine operation into two units: LHStation (fixed operator panel / monitor): Large screen area for data input and process monitoring Multi-touch surface with additional tactile elements Increased operating speed and process reliability LHMobile (mobile handheld unit): 10" multi-touch as standard Context-sensitive views such as PLC/NC keys, program status and messages Wired signal transmission for maximum safety during setup Ideal for ergonomic, user-friendly operation directly at the machine Hfodjxwzvljpfx Ah Hsp Skiving³ – overview of advantages Machine Very rigid machine design with cast-iron bed to absorb process forces Ringloader concept for fast workpiece change Tailstock for shaft machining and optimum workpiece clamping Optional chamfering during the machining process Burst-proof enclosure, suitable for both dry and wet machining (oil or emulsion) Tool Design and manufacture of conical and cylindrical skiving cutters Process-optimized tool design for every workpiece Tools available in PM-HSS and solid carbide versions Process Comprehensive process analysis and simulation to determine optimum cutting conditions Use of technology applications for customized process optimization Collision analysis with calculation software to secure the process Machine concept – efficiency through gear skiving Gear manufacturers are looking for alternatives that are: More productive and cost-effective than gear shaping At the same time more flexible than broaching The LK 200 is designed exactly for this: The basis is the high rigidity of the machine bed and skiving head (special bearing concepts, also for longer tool holders – crucial for internal gears). Combined with a burst-proof housing, the machine is suitable for both dry and wet cutting. The integrated tailstock unit makes the system universally usable for: External and internal gears Shafts and short gears on one machine By combining machine, tool and process (Skiving³), the LK 200 offers a fully integrated solution for highly productive gear skiving.

Condition: excellent (used), mileage: 41,253 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, first registration: 12/2021, emission class: euro6, color: red, suspension: other, Year of construction: 2021, Equipment: air conditioning, airbag, central locking, fog lights, trailer coupling, = Additional Options and Equipment = - 12V socket - Outside temperature display - Heated mirrors - Heated side mirrors - Hill start assist system - Bluetooth - DAB radio - ECO start-stop system - Electric windows - Electric front windows - Electrically adjustable exterior mirrors - Electrical trailer socket - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Isofix - Cab - Keyless start/go - Front center armrest - Emergency call system - Radio - Spare wheel - Thermal glass - USB port - Partition with window = Further Information = Transmission Transmission: 6-speed manual gearbox Axle Configuration Brakes: Disc brakes Front axle: Steered; Suspension: Parabolic spring Rear axle: Twin tyres; Suspension: Leaf spring Hodpfx Ahjxu I Ago Hsfp Weights Unladen weight: 2,750 kg Payload: 750 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 3,500 kg (unbraked 750 kg) Maintenance MOT (Main Technical Inspection): New TÜV upon delivery Condition Technical condition: very good Optical condition: very good Damages: none Warranty Warranty: 12 months Further information Please contact Lorenz Schoutteet for more information.

Condition: not inspected (used), 3m x 1000mm thermal oil fryer, direct from closed snack food factory where it was frying samosas and onion bhaajis. Complete with top hold down belt and teflon infeed. Machine was removed from the factory when it closed in 2015 and has been in storage ever since. Hodpfxeh Uhamo Ah Hsfp

Operating hours: 630 h, condition: excellent (used), Vötsch Model: VT 7018 Air-cooled temperature test chamber Only approx. 630 operating hours (read out)! Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm External dimensions: Width 865 x Depth 1280 x Height 1780 mm Test chamber volume: approx. 190 liters Technical specifications for temperature tests: Temperature range: -70 °C to +180 °C Temperature deviation in steady state, according to IEC 60068-3-5 depending on the test chamber temperature temporal ±0.1 to ±0.5 K spatial ±0.5 to ±2.0 K Hsdpfow Nqimsx Ah Hjfp Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Thermal compensation max. 1000 W Tube port L1: DN 50 mm Tube port L2: DN 125 mm Tube port R1 R2: DN 125 mm Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12 A Protection: 16 A time-lag, to be provided by customer Weight: approx. 460 kg net Refrigerants: R 404A and R 23 Important safety information for you as a buyer! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: good (used), Here we offer a PINK vacuum drying oven. Vacuum drying oven PINK Space required for operation and maintenance Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions VT External dimensions: Width approx. 1170 mm Depth approx. 1380 mm Height approx. 1615 mm Total height 1970 mm Interior dimensions: Width approx. 360 mm Depth approx. 735 mm Height approx. 300 mm Vacuum chamber volume 79 liters Operating temperature min. 20 °C max. 150 °C Electrical connection Connected load 3 x 400 V; 50 Hz N / PE 8.5 kVA Heating capacity 6 kW Cooling capacity 6 KW at 15 °C media temperature and 15 °C cooling water Heating: Floor, ceiling, side walls and door double-walled, flooded with thermal medium Heat transfer medium: Mobiltherm 32 heat transfer oil Filling quantity approx. 20 liters depending on the length of the pipework Compressed air pressure 6 bar Nitrogen N2 pressure Nitrogen N2 pressure Allowable operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Hedpfx Ahodf Rw So Hofp Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: gebraucht / used Scope of delivery: (PINK VT 300-600-300-1, operating instructions) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Vötsch temperature test chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6,5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Hodoir D U Dspfx Ah Hofp Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free field measurement) < 69dB (A) side entry 5,5 cm / 12,5 cm cabinet is water cooled Refrigerant: R 452A and R 23 weight approx. 570 kg Type: VTS 7034-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2022, condition: excellent (used), Dycometal Type: CCK -40/1500T Climate chamber water-cooled Volume liters 1500 Internal dimensions height 1000 mm width 1000 mmm depth 1500 mm External dimensions Height 2200 mm Width 1293 mmm Depth 3400 mm Thermal test Minimum temperature -40°C Maximum temperature +150°C Thermal gradient cooling 2.0 K/min. Thermal gradient during heating 3.5 K/min. Temperature stability ±0.1°C to ±0.3°C Temperature uniformity ±0.5°C to 1.5°C Climate test Temperature range +10°C to +90°C Hedpfxju N Uugo Ah Hjfp Humidity range 10% to 98% %RH Dew point range +6.5°C to +86°C Humidity stability ±1%RH to ±3%RH Water-cooled condenser Nominal voltage 400 V 3N~PE 50 Hz Output 16.1 kW 27.5 A Refrigerant R-452A Weight: 1120 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Hfedpfxoihb Amj Ah Hep Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Hsdpfxsxdi Eze Ah Hsfp Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, Schmidt Laboratory Press MB 10 300 Item description: For sale is a high-quality Schmidt MB 10 300 laboratory press. The machine is in ready-to-operate condition and has been well maintained at all times. Ideal for laboratory applications, research, and precise pressing operations. Technical highlights: - Press force: max. 100 kN - Retraction force: approx. 43 kN - Operating pressure: approx. 200 bar - Piston diameter: 80 mm, piston rod diameter: 60 mm - Stroke: 300 mm - Heating platens: 300 x 300 mm, electrically heated up to 200°C - Heating power per platen: 3 kW - Closing speed: 23 mm/s, opening speed: 0–25 mm/s manual / 60 mm/s automatic Hsdpfx Ahexg Hybe Hjfp - Hydraulics: Internal gear pump with 63 l/min, drive power 3 kW - Electrical connection: 3 x 400 V, 50 Hz - Control voltage: 24 V Special features: - 4-column vacuum design for stable guidance - High-quality, precision-ground parallel heating platens - Separately controllable electronic temperature regulation with ±2 K accuracy (PT100) - SIEMENS PLC control system with two-hand safety operation - Automatic operation with programmable pressing and heating cycle - Adjustable press stroke with upper and lower limits - Clearly arranged control panel for easy operation - Robust, durable construction with integrated thermal insulation Dimensions and weight: - Width: 1140 mm - Height with safety door open: 1935 mm - Depth: 1350 mm - Operating height: 1110 mm - Weight: 920 kg Color scheme: - Machine frame: slate grey RAL 7015 - Control cabinet & safety enclosure: red RAL 2002 - Functional components: galvanized Condition: used Scope of delivery: (see image) - Schmidt MB 10 300 laboratory press - Integrated PLC control with operator device - Hydraulic unit and all function-related connections (Changes and errors in technical data reserved!) We will be glad to answer further questions by phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Hsdpsxr A R Tefx Ah Hjfp Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.