Used Heller Mcp 250 for sale (71)

Condition: ready for operation (used), Year of construction: 1999, Main Drive Spindle speed range 16000 Tool taper HSK-63A Tools Number of index 120 This HELLER MC 16 with pallet pool was manufactured in 1999. It features a Control Uni Pro system, a 120-tool magazine, and an HSK-63A tool holder. The spindle operates at a speed of 16,000 rpm. Consider the opportunity to buy this HELLER MC 16 horizontal machining centre. Contact us for more information. Gedpfxex D Iz Ue Afnsin Application Types Milling

Condition: good (used), BJ. 1999+2001 Combined Crankshaft Machining Combination of centric turning and eccentric milling operations on two machines connected via a shared chip conveyor with a single chip discharge. Siemens 840D control system Tool holder - Heller Giodpfxev I Ab Ue Afnen Nominal tool diameter Ø700 - tools are not included but can be purchased or newly acquired for an additional charge. NC-controlled steady rest for milling operations 3-jaw chucks on both sides from Blessing with integrated alignment arms Both machines with automatic loading hatch from above with a loading interface or for manual loading. The machines are currently still in series production and can be inspected under power. Installation of components is possible upon request for an additional charge, with documentation of the interchangeable parts and tools. Safety lock for the control system and drives included - free location. Availability upon request, warranty excluded. Year of Production: 1999+2001 Combination of concentric turning. and eccentric Milling Operations in 2 separate machines, which are linked through a common chip conveyor with high drop-off Machine control: Siemens 840D Tool Adapter - Brighter Tooling diameter Ø700 nominal - Tooling is not subject might be subject for separate purchase or new from supplier NC controlled support with pads both sides 3-jaw-chucks from Company Blessing with integrated equalizing device automatic Gantry door for overhead loading and corresponding interface or manual loading also possible Machines are actually in serial production and can be inspected upon request set-up of individual parts possible for separate oncost including documentation of change-over parts and tooling safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, Year of construction: 2006, operating hours: 48,659 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, Control unit: Siemens 840D PL Spindle: 7.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Tool magazine & places: Rack 234 / Chain 50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1000 / 1000 Pallet size (mm): 800 X 800 Giedpfx Ajug T E Aofnsn Workpiece clamping: mechanical Additonal options: Infrared receiver for measuring probe (BLUM); Interface for attachment heads; fast drill fracture sensing (SBBK); codechip tool; Runtime and quantity recording; intergrated prozess monitoring IPM; Screen blow-off device for operator door; alternative strategy; toolplaning with MCIS TDI;

Condition: good (used), Year of construction: 2019, functionality: fully functional, operating hours: 1,994 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Fanuc, controller model: Fanuc 31i-B, mount diameter: 100 mm, number of spindles: 1, spindle speed (max.): 10,000 rpm, Operating hours: 7194 / usage time: 1994 Year of construction: 2019 Control unit: Fanuc 31i-B Gsdpovvmnuofx Afnoin Spindle: PC100i (10.000 1/min) Tool clamping system: HSK 100 Tool magazine / places (Options): Chain/50 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 400, IKZ 70 bar Positioning range XYZ (mm): 1000 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: Hydraulic 80 bar Additonal options, Specifics: HELLER facing slide unit; Receiver for measuring probe (RENISHAW); Coolant temperature control; forward looking collision avoidance; Interface for exhaust system; 3 colour status lamp; work area flush; Scraping conveyor for wet machining; Fast drill fracture sensing (SBBK); multi-spindle-head support (MSK); Thermal growth compensation; Feed force display; Automatic loading sequence; Automatic unloading sequence; increased tool weight 35kg; tool codechip; Since response emails from Maschinensucher often end up in the spam folder, we kindly ask you to regularly check this folder or contact us directly.

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Gedpfx Asurkypjfnoin Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Siemens, controller model: Siemens 840d solution line SL, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, workpiece height (max.): 900 mm, workpiece diameter (max.): 900 mm, table width: 630 mm, table length: 630 mm, table load: 850 kg, overall weight: 16,000 kg, spindle speed (min.): 5,000 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 960 h, coolant supply: 70 bar, spindle motor power: 43,000 W, spindle nose: HSK100, number of spindles: 1, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, rotational speed infinitely variable, List price new: €749,000 HSK100, the machine is in like-new condition and has not yet produced any series parts. Giedpfx Afexzh Ebsnjn So far, only one component has been sampled.

Year of construction: 1985, condition: used, largest surface to be machined: 400 x 300 mm speed of the knife spindle infinitely variable: 1600 - 6000 rpm Giedpfeb Nxdvox Afnjn electrical connection: three-phase current 380 V space requirement: 900 x 800 x 600 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens Sinumerik 840D, rotational speed (max.): 6,000 rpm, The machine is particularly suitable for machining cylinder heads and crankcases. The machines have been in single-shift operation since 2013. Maintenance was performed regularly. TECHNICAL DETAILS X-travel: 1,000 mm Y-travel: 800 mm Z-travel: 1,100 mm Control: Siemens Sinumerik 840D Spindle Tool holder: SK 50 Speed range: 45 – 6,000 rpm Pallets & Magazine Pallet size: 630 x 800 mm Pallet change time: 21 s MACHINE DETAILS Machine weight: approx. 20 t Space requirement: approx. 6.80 x 3.00 x 3.20 m Gedpfev Tl Rvsx Afnjin

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Working Area Working envelope (X/Y/Z): 450 × 450 × 450 mm Maximum workpiece height: 700 mm Pallet size: 320 × 320 mm Maximum pallet/table load: 300 kg Spindle Number of spindles: 2 Tool spindle: 10,000 rpm, 95 Nm Speed extension: 18,000 rpm Tool interface: HSK 63 Feed Acceleration: 10 m/s² Rapid traverse: 60 m/min Chip-to-chip time: 2.6 s Tool Magazine Tool positions: 2 × 60 Tool magazine with 60 positions: included MACHINE DETAILS Weight Machine weight: approx. 14 t Control Control system: Siemens Sinumerik 840D EQUIPMENT Double-spindle, 4-axis horizontal machining center 4 machine pallets Renishaw probe Infrared receiver for probe, Renishaw model Vaf72a0p Operator panel at workpiece setup station Operator panel at tool setup station Workpiece setup stations manually rotatable Hydraulic workpiece clamping, 60 bar Pneumatic support control at workpiece setup stations Automatic swing door Extended coolant supply 70 bar / 1,500 l VF 250 coolant chiller Work area flushing Emulsion mist extraction Roto-Clear Automatic setup sequence Automatic teardown sequence Gsdpfx Aowx Er Nefnjin Run-time and quantity recording Status lamp, 3 colors Modem for remote diagnostics Control cabinet lighting

Condition: used, We are offering a Heller drilling machine, model RB 32/800, for sale. The machine is in good technical condition and ready for immediate use. Gjdpju Tt Dlsfx Afnoin

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 26-44041, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Siemens, TECHNICAL DETAILS x-path: 1000 mm y-path: 800 mm z-path: 1100 mm Feed forces X-axis: with ED S3 -40% 15000 N Y-axis: at ED S3 -40% 15000 N Z-axis: at ED S3 -40% 20000 N Feed speed in X-, Y- and Z-axis: 1-30000 mm/min Rapid traverse speed: 30000 mm/min Acceleration in X- Y- and Z-axis: 3.0 m/s^2 Rotary indexing table: 20 l/min Giodpfx Afev S H S Ssnon Machine weight: approx. 15.2 t Tool holder: SK50 Alternative tool holder: HSK-A 100 Speed range: 45-6,000 rpm Pallet size: 630x800 mm Pallet change time: 21 sec

Condition: used, Year of construction: 2019, operating hours: 9,500 h, functionality: fully functional, machine/vehicle number: 56608, Heller MC20 machine in perfect condition. Very low cycle count, approximately 180,000 produced parts. Regularly serviced. Complete machine documentation available. 5-axis machine. More information upon request. Godpfx Afox A Tvnsnjin

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. Godpfxet Hwrhj Afnoin * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: good (used), Year of construction: 2004, Technical details shown in pdf document. Gisdoruq N Iopfx Afnon

Condition: good (used), Year of construction: 2001, functionality: fully functional, The machine is in good technical condition, test run possible, Siemens Sinumerik 840D control system. Pallet dimensions: 500 x 630 mm Giedpfx Aox A Ewkefnjn Axis travels X / Y / Z: 1 - 60,000 mm/min Tool magazine: 60 positions Specifications: X axis: 800 mm Z axis: 800 mm Y axis: 800 mm Max. workpiece weight: 800 kg Spindle taper: HSK 80 A Tool diameter: 95 mm Machine weight: 12,000 kg Dimensions (L x W x H): 8000 x 4900 x 3800 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw Godpfx Afeuhb D Asnjin - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders

Condition: excellent (used), CV saws grinder Heller model SA315 Giodpfx Afoxtbtcenjn

Condition: ready for operation (used), Year of construction: 2023, operating hours: 8,900 h, functionality: fully functional, Heller HF5500 including Fastems FPT 1000 Heller HF5000 5-axis machining center Gijdjw I Tupopfx Afnen Control: Siemens Sinumerik SL Spindle: HSK100 Tool magazine: 100 tools Fastems FPT1000 18 pallet stations Planning software (unmanned shift)

Condition: excellent (used), Year of construction: 2015, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Sinumerik 840Dsl, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, rotational speed infinitely variable, 2x Heller H6000 + Fastems Container Automation Horizontal Machining Centers with Flexible Pallet Container Heller H6000 2 machines with identical specifications Travel ranges Feed force X 1000mm 15kN Y 1000mm 15kN Z 1000mm 20kN B 360°, 0.001° Direct linear measurement system on all axes Rapid traverse: Axis dynamics Power X/Y/Z 50 m/min, 5m/s² B 25 rpm Spindle – Power Cutting Interface: HSK100 Speed: 5–8000 rpm Power: 43kW (40% duty cycle) Torque: 822Nm (40% duty cycle) Last spindle replacement: 2020 Tool Magazine Type: Shelf magazine Magazine positions: 265 Max. tool length: 600mm Max. diameter: 280mm Godpfx Aoxxx Dcofnein Tool coding: Balluf chip Second control panel at setup station Setup station with 7 exchange positions Pallet changer Pallet size: 630x630mm Max. interference circle: 1000mm Max. height: 1200mm Max. weight: 1000kg Coolant system: Scraper belt chip conveyor Knoll coolant system Paper band filter Internal coolant supply (ICS) 50 bar, frequency controlled Work area rinsing Emulsion mist extraction Disc blow-off device for operator door Additional equipment: Facing slide device (auxiliary axis/U-axis) 4 facing slides per machine Tangential control incl. NC cycles Wireless measuring probe (Renishaw) Space requirements: 7100x3750x4300mm (LxWxH) Machine weight: 15,600kg Total power requirement: 44kVA Control: Sinumerik 840D sl Fast drill breakage monitoring Process-integrated tool monitoring Status lights 3D workspace model data Operating data acquisition (OPC/UA) Year of manufacture: 2015 Operating hours: approx. 32,000h (Machines still in operation) Fastems Pallet Automation FPC1500 Base container with 2 setup stations Extension container Total 20 pallet positions on 2 levels Control: MMS Space requirements: approx. 18x2.4x4.2m Total space requirement for the system (2x Heller + Fastems) approx. 18x10x4.5m Machines are still in ongoing production. Inspection possible by arrangement. Relocation of the machines can be organized.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Year of manufacture: 1999 Width: 1200 mm Length: 1200 mm Giedpfex Uwtkox Afnjn Number of axes: 5 Tool holder: SK50 Spindle speed (RPM): 3,500 Workable materials: Steel, aluminum, titanium, graphite, copper, invar, composite, Delrin, Peek

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER AUTOFEED 8 PALLETS Gsds Dvlxopfx Afnjin 140 TOOL ISO50