Used Height Measuring Device for sale (45,576)

Condition: refurbished (used), functionality: fully functional, measuring range X-axis: 100 mm, measuring range Z-axis: 40 mm, travel distance Z-axis: 350 mm, Mitutoyo contou measuring machine Contracer CBH400 in very good condition measuring ranges: Z = 40mm X = 100mm Stage = 350mm Machine was completely overhauled und got a used PC with Windows 7 (new installed) and software Mitutoyo Formpakpak (new Formtracepak as an option) Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Prsdpfx Aaoum Etmj Eef Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Condition: excellent (used), Mitutoyo contour&roughness measuring machine Formtracer CS 3000 H4 in very good condition measuring ranges: Z = 5mm (stage 350mm) X = 100mm Machine was completely overhauled und got a used PC (new installed) and nearly new software Formtracepak 5.3 Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Included are a lot of measuring tip (new price appx. € 3.000,--) Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union Predpfjp Ecg Rjx Aa Esf

Condition: excellent (used), measuring range X-axis: 100 mm, measuring range Z-axis: 50 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 350 mm, Mitutoyo contour measuring machine Contracer CV 3100 S4 in very good condition measuring ranges: Prjdpfevbq Suex Aa Ejf Z = 50mm (stage 350mm) X = 100mm Machine was completely overhauled und got a used PC (new installed Windows 10) and nearly new software Formtracepak 5.6 Overhauled measuring table (50x100mm) and self centering vice for € 2.000,-- on demand. Upgrade to new PC with Formtracepak version 6 € 3.500,-- Optionally we offer installation, calibration and softwaretraining Price is for delivery inside european union

Condition: refurbished (used), Mauser inside gauge with new digital probe from Citizen incl. display unit measuring range 30-35mm Prodsni Aumopfx Aa Eef Caliber ring Ø35

Condition: reconditioned (used), Mahr Rougness Measuring system M2 - measuring range 12,5mm - skid probing 300µm - computing device with TFT display Pjdpovki Slofx Aa Esrf - Printer - Adjustable rack with turntable

Condition: excellent (used), Here we offer a screw system. Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: gebraucht / used Scope of delivery: (see picture) Podpfxjqa A Ulo Aa Eorf (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Written order possible by email or fax

Condition: good (used), Year of construction: 2015, SPC measuring device / remeasurement station for measuring diameters and cylindrical form Measuring device, manual measuring station, testing device, test station Measuring computer QDS-Base, manufacturer KOMEG Manufacturer: Hafner Fertigungsmesstechnik Philipp Hafner GmbH & Co. KG 3 levels, each with 3 probes Measurement with pneumatic jet measuring mandrel in 3 levels, each level with one pair of nozzles Prsdpowxb Sfjfx Aa Esf Measuring computer QDS-Base, make KOMEG incl. measurement software, Profibus, interface, monitor, and keyboard Temperature compensation "Price / details on request". All technical data subject to typing errors or mistakes. We sell exclusively only to countries of the European Union.

Year of construction: 2009, condition: used, Technical details: x-travel: - mm y-travel: - mm z-travel: - mm operating pressure: max 10 bar bar voltage: 380 V voltage: 50 Hz machine weight approx.: 228 kg dimension machine xH: 0,98 x 0,65 x 1,16 m Pjdpfx Aovr Stzea Eerf Es handelt sich hierbei um ein Bremsprüfgerät Pdr7. Das Gerät können wir nur über den PC in die Position "nach oben fahren" bewegen. Da es sich hierbei um ein Bremsprüfgerät für die Fahrzeuginstandhaltung (speziell für Schienenfahrzeuge der DB) handelt, sollte sich die Freischaltung über den Hersteller eingeholt werden. Wir bieten das Bremsgerät wie beschrieben und steht an. *

Condition: good (used), FAG gauges: PG-20/E -F, No. 15863 No.256 Pjdpsinuruefx Aa Eorf If you are interested, we will be glad to inform you about other machines in our house. You are welcome to visit the machine in our house after previous appointment.

Year of construction: 2021, condition: like new (used), functionality: limited functionality, machine/vehicle number: 8001857, 2 special machines (measuring device) for dismantling the components Predsv Tywkjpfx Aa Ejf

Condition: used, Technical details: machine weight approx.: auf Anfrage kg voltage: 50 Hz current- max.: 230 A dimension machine xH: auf Anfrage m Measured value capture processing Recording of machine quality measurements ‘Mode of operation: Measuring the relative movement between tool and workpiece.’ (Excerpt from operating instructions) Measuring computer Device options: -sequential measurement Prsdpsu N Avlsfx Aa Eef -Test plan management -16 features -sequence triggering -Diskette drive Control unit manufacturer Nieberding, serial no. 8-19863 with connection for air conditioning and shut-off valve Equipment: 2x precision measuring display and maintenance box Accessories Test mandrel Ø 48mm and test device *

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Psdpfexv A T Nox Aa Esrf Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos Prodpfx Aaoxvp S Ej Esf -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, total length: 640 mm, total width: 640 mm, total height: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the liquidation of a business. Submitting a bid binds you to timely collection between 26/01/2026 and 29/01/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 640 mm x 640 mm x 1,500 mm Weight: 150 kg EQUIPMENT Prsdpfx Aajxqqlce Eof Height gauge Vice with 100 mm jaw width

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Predpfxoxyungo Aa Ejf Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control.

Condition: ready for operation (used), Metris coördinatenmeetmachine (CMM) gemaakt in het Verenigd Koninkrijk, nu eigendom van Nikon Metrology. Structuur van granieten basis met keramische brug en keramische Z-ram (LK Ceramic Bridge Technology) Geschikte probes: Renishaw PH10M/MQ, TP20, TP200, SP25M, SP80 of Nikon LC15Dx / LC50Cx laserscanners Laatste Kalibratie: 19-09-2024 Functies: Keramisch brugontwerp – zorgt voor dynamische stabiliteit en stijfheid Hoge nauwkeurigheid en snelheid voor dimensionele inspectie van grote of complexe onderdelen Geschikt voor contact- en laserscansensoren Typische toepassingen: lucht- en ruimtevaart, automallen, gereedschappen en precisiefabricage CAMIO MULTISENSOR CMM-SOFTWARE INLCUSIEF: Renishaw (optioneel): - Sonde-interface PI 200 - Interfaceselector IS1-2 - Renishaw PH10MQ - Nikon LC60D - Nikon LC15Dx - TP 200-sonde - SM25-1 - SM25-2 - SM25-3 - FCR 25 Autochange Rack - AOR3 Autochange Rack - Bol Renishaw + Motivair Luchtdroger Prodpfjxl Hxnex Aa Ejf

Condition: used, Year of construction: 2011, operating hours: 654 h, machine/vehicle number: 0200200166, Type of fuel: LPG Empty weight: 5.420 kg Lifting capacity: 360 kg Working height: 1.419 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Psdpfjx Nux Tex Aa Ejrf Tyre brand: Outrigger Transport dimensions (LxWxH): 3.07x1.75x2.8 Please contact PFEIFER GROUP for more information

Condition: excellent (used), mileage: 492,466 km, power: 335 kW (455.47 HP), first registration: 05/2007, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 10,360 mm, total width: 2,550 mm, loading space length: 8,000 mm, loading space width: 2,500 mm, loading space height: 2,850 mm, Year of construction: 2007, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), power mirror, tail-lift, = Additional Options and Accessories = - Leaf suspension - Remote controlled central locking - Reversing camera - Sun visor = Remarks = WDB9302051L216005 = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,946 cc Podpjx N H R Isfx Aa Esrf Axle Configuration Maximum front axle load: 7,500 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 11,720 kg Payload: 14,780 kg Gross vehicle weight (GVW): 26,500 kg Functional Tail lift: Dhollandia, 1,500 kg Condition Technical condition: Very good Optical condition: Very good Identification Registration number: BS-XS-94 Additional Information For more information, please contact Sales. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are exclusive of VAT. No rights can be derived from the information provided. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber). MOB: Dutch (Available on WhatsApp and Viber). When paying by bank transfer, please transfer the funds to our bank account below. Always verify the payment details as stated on our website. If you receive any other information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, cooling device, cooling unit -Manufacturer: Cloos, cooling unit for TIG welding machine -Type: unfortunately no type designation -Flow rate: l/min -Quantity: 2x cooling device available -Price per piece Prodpfjqgi Idox Aa Esf -Dimension: 620/310/H235 mm -Weight: 15 kg/pc.

Condition: new, roll diameter: 100 mm, roll width: 35 mm, The scope of delivery includes: 01x swivel castor, new Castor material: Polyamide wheel Plain bearing with bearing marks Castor material color: cream white Total height: 130 mm Castor Ø: 100 mm Castor width: 35 mm Rotation radius: 360° Predpfx Ajrtplroa Eof Panel dimensions: 105 x 80 mm (WxD) Screw grid: 80 x 60 mm (WxD) Drill hole Ø: approx. 11 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 0.700 kg Advantages compared to PA wheels: - The PA wheels are very low-wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), De Trimos Horizon Setting HS4 is een uiterst nauwkeurige meet- en kalibratiebank, ontworpen voor werkplaats- en laboratoriumomgevingen. Hij is bijzonder geschikt voor de kalibratie van meetinstrumenten met vaste en variabele afmetingen, zoals micrometers, binnenmeettasters, meetklokken en schuifmaten. Belangrijkste specificaties: Meetbereik : 0 – 2050 mm (0 – 80,7 inch) Max. Toelaatbare fout (EMPE): 0,7 + L/1000 µm Herhaalbaarheid (2σ): 0,5 µm Resolutie: 0,00001" (0,0001 mm) Meetkracht: 15 N Prjdpfx Aex Imkxoa Esf Interfaces: USB / RS232 Gewicht: 181 kg Maximale verplaatsingssnelheid: 1500 mm/s

Condition: used, Year of construction: 2011, operating hours: 1,722 h, machine/vehicle number: CD702328, fuel type: diesel, Empty weight: 4.080 kg Lifting capacity: 450 kg Working height: 1.200 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Transport dimensions (LxWxH): 3.18x1.78x2.56 Please contact PFEIFER GROUP for more information Prsdpfx Aox Nuxyja Eof

Condition: like new (used), Included in delivery: 01x Upright protector, second choice (new) Manufacturer: SSI Schäfer Suitable for frame profile type: P213, P215, P217 Material color: yellow Total height: 1,000 mm Total width: 130 mm Inner width: 122 mm Suitable for frame profile: 120 mm Total depth: approx. 65 mm Prodpfx Aasw I Dmps Eef Leg dimensions: 75 x 75 mm Material thickness: 4.00 mm Height of deflector: 50 mm Drill hole diameter: 9 mm Drill hole spacing: 250|300 mm Weight / unit: approx. 7.97 kg Number of drill holes: 08 pcs. Including fastening material consisting of: 08x Hexagon bolt M8x30 mm 08x Hexagon nut M8 16x Washer M8 General information about the item: This item is offered for collection only. If transportation or shipment of this item is desired, additional costs will apply, which can be quoted separately depending on delivery location and scope of supply.

Condition: used, Year of construction: 2013, operating hours: 1,080 h, machine/vehicle number: 21 26377, Drivetrain Pedpfx Aaex Nl H Ue Ejrf Type of fuel: LPG Weights Empty weight: 6.488 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 2.080 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Max. horizontal reach: 1300 m Transport dimensions (LxWxH): 6.62x2.27x2.18 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Scope of delivery includes: 01x upright protector, used Material color: yellow - painted Overall height: 1,190 mm Overall width: 122 mm Internal width: 110 mm Suitable for frame profile: 110 mm Total depth: approx. 60 mm Material thickness: 6.00 mm Borehole diameter: 13 mm Hole spacing: 650 mm Weight | per unit: approx. 12.69 kg Number of holes: 02 pcs. Including fastening material consisting of: 02x hexagon bolt M10x35 mm 02x hexagon nut M10 Podpsw Ngzfsfx Aa Eerf 04x washer M10 General information about the item: This item is only offered for collection. Any transport or shipping of this item is subject to additional costs, which can be requested from us separately depending on place of delivery and scope of delivery.