Used Heating Rail for sale (22,311)

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Godpfxexbgrge Acgjui Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2511569 VG-057341, overall weight: 1,460 kg, Equipment: documentation/manual, I am offering for sale a new (manufactured in 2024) and unused conveyor for the automatic loading of wood chips/pellets for filling internal chip/pellet storage facilities. The manufacturer is the German company Heizomat. The machine consists of the following components: 1. Filling hopper – hopper with a screw conveyor shaft, 3 m wide, without wheels, 2. Electric motor, 3. Vertical screw conveyor shaft, installed on the right side. The top edge of the hopper is at a height of 0.7 m, so it can be filled with standard agricultural dump trucks or front-end loaders. Price for the complete set: €13,290.00 / negotiable (we are not VAT registered). Gujdpfxezp Ihxs Acgji Equipment color: anthracite gray. Personal pick-up: Pezinok, Za dráhou 21 (stored in a warehouse). Since the equipment has not yet been assembled as a whole, the photograph shown is for illustrative purposes. If interested, a used tractor-mounted chipper from Brixon (Dabaki), BX122RS, is also available for sale at a price of €3,990.00.

Condition: used, Electrically powered chamber furnace with air circulation, PADELTTHERM (Leipzig), Type 2700/600 Heating furnace, convection chamber furnace, circulation furnace for annealing and stress-relieving Industrial furnace, chamber circulation furnace, electrically heated, with air circulation Chamber furnace, convection furnace, annealing furnace, muffle furnace Year of manufacture 2003 Temperature range max. 600°C Usable internal volume 2.7 m³ Internal width 1500 mm Internal height 1500 mm Gusdpfx Aj Akh Inecgji Internal depth 1250 mm Heating power 81 kW Connected power approx. 90 kW Mains connection 400 volts, 50 Hz, 160 amps (3-phase) - Electric lift-up door for front loading and unloading - Lift-up door movement via geared motor - Electrical control with temperature control, located beside - Electrical heating (Zone 1) 40.5 kW - Electrical heating (Zone 2) 40.5 kW - Hot air circulation fan (Zone 1) 3 kW - Hot air circulation fan (Zone 2) 3 kW - Temperature controller PMA KS98, Type 9407 963 00001 - Adjacent electrical control cabinet (W80 x D40 x H200 cm) - Electrical wiring diagram available Space requirement: Width 245 cm x Depth 190 cm x Height 380 cm Transport height: 295 cm (guide and suspension for lift-up door removed) Weight approx. 5000 kg Price quoted for the current condition, including control cabinet, as shown in the picture.

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 7,150 mm, construction height: 2,920 mm, operating hours: 204 h, fuel type: electric, mast type: triplex, Manufacturer + model: STILL EK-X 24 Mast: 3F7150 ID: 26112.5012 Gsdpfjz Tdzbjx Acgoui Category: Used Mast: 3F Lowered height: 2920 mm Lifting height: 7150 mm Capacity: 1000 kg Platform height: 6600 mm Picking height: 8200 mm Initialized: Yes Year: 2017 Hours: 204 hours Capacity: 24V / 1240Ah Options: FULL options!! - Triplex mast - FFL - Adjustable forks!! - Special SAFETY gates!! - Side guide / Rail guidance - (including end-of-travel braking under the battery) Truck width = 1480 mm Cabin width = 1400 mm Complete, LIKE NEW!!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input thermal power: 115 kW output thermal power: 93 kW heating capacity: 80,000 kcal/h fan motor power: 1.5 kW fan capacity: 6300 m3/h fuel: solid fuel of wood origin flue gas extraction fan weight: 415 kg year of manufacture: 2004 voltage: 380 V Gujdpfx Aj Airtxjcgji CE marking external dimensions: 155x80 cm, height: 200 cm

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Guodpfx Acsz Ru Eregoi Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Year of construction: 2021, type of input current: three-phase, input current: 120 A, input voltage: 400 V, We offer this used Chiossi & Cavazzuti Tetris 6M 1900 drying tunnel with a 6-meter heating section, manufactured in 2021. Power: 72 kW Phases: 3P+PE Current: 120 A Voltage: 400 V Frequency: 50/60 Hz Weight: 2500 kg Serial number: 2637 Gjdpfxoztplmo Acgsui Product code: 1390081 Year of manufacture: 2021 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2018, operating hours: 865 h, functionality: fully functional, For sale: Jenbacher gas engine JMS 420 GS-B.LC. A used, high-performance Jenbacher JMS 420 GS-B.LC gas engine (series 4) for stationary use in combined heat and power (CHP) plants is for sale. Manufacturer: INNIO Jenbacher. Type: JMS 420 GS-B.LC. Electrical output: approx. 1,400–1,500 kW (depending on gas type and configuration). Gas type: natural gas / biogas / sewage gas. Year of manufacture: 2018. Operating hours: 865 h. Condition: engine preserved. Scope of delivery: engine including control panel, exhaust system, etc. Special features: high electrical and thermal efficiency, reliable MWM/Jenbacher technology for continuous operation. Location: 48599 Gronau. Availability: immediately / by arrangement. Price: negotiable (upon request). If you are interested, have questions about technical details, or would like to arrange a viewing appointment, please do not hesitate to contact us. Guodo Ahnzbspfx Acgoi

Year of construction: 2020, condition: used, Manufacturer: KAPP Model: KF3-1500-1 Year: 2020Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) Nominal diameter: 85 mm Gusdpfez Iubtox Acgsi Heat exchanger length: 1,440 mm Outer diameter: 130 mm A bundle of around thirty tubes, flanged tube sheet Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Weight approximately 6 tons Cooling capacity 866.8 kW Airflow: 217476 m³/h Gusdsz S U Naopfx Acgsi Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Reznor UDSA Gas-Fired Air Heater, 54.74 kW, Heating Capacity 5830 m3/h UDSA Gas-Fired Air Heater – Efficient, Even at Peak Performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures uniform air distribution in industrial halls. This air heater, which is easy to install, is available in 14 sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the hall, as standard. Gujdswb A Hiopfx Acgsi The UDSA gas-fired air heater from REZNOR ensures uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-Fired Air Heater. The advantages: Efficiency of over 92% The device is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. The gas-fired air heaters are suitable for: - Natural gas or liquid gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation° control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via the roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas-fired air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural Gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m3/h Protection class: IP20 Part No. 0461BN0677 More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Specifications: Surface Area: 15 m² Material of Shell: Stainless Steel Material of Tubes: Stainless Steel Gsdpfxsyh I Uhe Acgjui Shell Side Max. Pressure: 6 bar Shell Side Max. Temp.: 150°C Tube Side Max. Pressure: 10 bar Tube Side Max. Temp.: 150°C Configuration [Vertical/Horizontal]: Vertical Weight: Actual: Kg550.0 Dimensions: 650 X 3000

Condition: ready for operation (used), Year of construction: 2020, Abus overhead crane, crane gantry, crane, suspended track, suspended crane, chain hoist, Berlin Manufacturer: Abus Load capacity: 500 kg Year of manufacture: 1991, 2020, 2020 Double crossbeam Berlin 3: approx. 6.60 m (year of manufacture 1991), center track gauge Crossbeam Berlin 2: approx. 6.60 m (year of manufacture 2020), center track gauge Crossbeam Berlin 1: approx. 6.60 m (year of manufacture 2020), center track gauge Longitudinal rail: approx. 40.20 m Gujdpfo Ah Sykjx Acgoi Chain hoists: 3 units Manufacturer: Abus Load capacity: 500 kg Hook travel: 4 m You are welcome to visit us for an inspection. We will gladly arrange cost-effective transportation for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2021, load capacity: 1,000 kg, Abus EHB overhead crane, crane structure, crane, suspended monorail, chain hoist, Kiel, 1000 Kg Manufacturer: Abus Type: EHB-X Load capacity: 1000 Kg Year of manufacture: 2021 Double crossbeam: approx. 7.30m Longitudinal rail: approx. 4.50m Gedpfxs Ai Hfks Acgsui Track gauge: approx. 4.80m Chain hoist: Manufacturer: Demag Type: DC-COM 10-1000 1/1 H4 V4/1 Year of manufacture: 2020 Load capacity: 1000 Kg Fine lifting speed: 1 m/min Main lifting speed: 4 m/min Hook travel: 4 m You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective transportation for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the product description may occur and are subject to change.

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Gusdpfowd Nw Tex Acgji Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: ready for operation (used), Abus overhead crane, crane gantry, crane, suspended monorail, suspended crane, chain hoist Manufacturer: Abus Load capacity: 500 kg Cross traverse Hamburg 2: approx. 6.55 m (year of manufacture 2020), center track gauge Cross traverse Hamburg 1: approx. 6.55 m (year of manufacture 1991), center track gauge Longitudinal rail: approx. 41.80 m Gedpfxo Akbgxe Acgsui Chain hoists: 2 units Manufacturer: Abus GM 4 500.6-2 Load capacity: 500 kg Main lift/fine lift: 6.00 / 1.50 m/min Year of manufacture: 2020 Manufacturer: Abus Type: GM3 Load capacity: 500 kg Main lift/fine lift: 6.0 / 1.5 m/min Year of manufacture: 1991 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Guodpfsz Ruxljx Acgsi Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Cooling: Yes Heating: Yes Temperatures: Depending on Connection Feed Pump: Mono Pump for Viscous Products CIP: This is cleaned through the CIP system Tube in Tube Legth: 13 meters including bends

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16 Guodpjzvwnbjfx Acgei

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance. The most well-known product from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install air circulation unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall, depending on the standard configuration. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of equipment, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Gedjx Ihiijpfx Acgjui Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust gas connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day-night-week program - Exhaust gas extraction via the roof, version B or C * - Exhaust gas extraction through the exterior wall, version C * Gas-fired air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat output (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m3/h Protection class: IP20 You can find more new and used products in our shop! International shipping costs on request!

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). Godpfx Acsz Tdfgegoui 4. Expansion tank Reflex Type N600 (600 liters): On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,200 h, functionality: fully functional, power: 35 kW (47.59 HP), Spanner wood gasifier HKA 35 for sale A Spanner wood gasifier HKA 35, manufactured in 2022, is for sale. Gjdpfx Ao Ait Aijcgsui The system is in good and well-maintained condition and is currently still in operation. An inspection and demonstration under operating conditions are possible after prior arrangement. The system is operated with wood chips. A major advantage: independence from the gas and energy market. Technical data: Manufacturer: Spanner Type: HKA 35 Year of manufacture: 2022 Electrical output: 35 kWh Thermal output: 80 kWh Operating hours: approx. 3,200 h The sale is solely due to the seller's retirement. The system has always been operated with care. All customer service and maintenance work has been carried out regularly. Location: 88339 Bad Waldsee Price: €120,000 (negotiable) For further information or to arrange an inspection appointment, please do not hesitate to contact me. Private sale.

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Godpfx Asz N Smdecgoui

Condition: used, Year of construction: 2020, operating hours: 27,008 h, functionality: limited functionality, machine/vehicle number: 7633193000003100, power: 16 kW (21.75 HP), overall weight: 8,000 kg, total width: 1,900 mm, total length: 6,000 mm, total height: 1,700 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, control cabinet height: 1,600 mm, control cabinet length: 400 mm, control cabinet width: 1,000 mm, temperature: 100 °C, input frequency: 50 Hz, operating pressure: 6 bar, Equipment: documentation/manual, hot water, type plate available, For sale: Viessmann Vitoflex 300-UF wood chip heating system (2020) – 216 to 720 kW. Highly efficient wood chip heating system for industrial applications with very low emissions. Ideal for agricultural operations, industrial heating systems, or municipal district heating networks. The complete system includes: • Fine dust filter for particularly low-emission combustion. (Schräder exhaust technology Nat E-Filterbax-4-D300) • Automatic fuel feed. • Control cabinet and control system. • Professionally maintained – in very good condition. Technical data: • Manufacturer: Viessmann. Gjdpfsxvb Tbox Acgeui • Model: Vitoflex 300-UF. • Power output: 216 – 720 kW. • Year of construction: 2020. • Operating hours: 27008 h. • Fuel: Wood chips. Additional information: • Complete technical documentation and maintenance records available upon request. • Dismantling and transport possible by arrangement. • Used system, sold as is, without warranty. Location: Netherlands. Inspection possible by appointment.

Condition: used, Mytron Type: WT 850 Gedpfezd R Tmjx Acgoui Mytron Drying Cabinet The WT 850 drying cabinet is used for the simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust design (box-profile frame) and the use of stainless steel for the heating chamber, the WT 850 drying cabinet can be used universally. The rolling cart allows for easy loading and unloading of the WT 850 drying cabinet. An exhaust nozzle with a regulating flap allows the cabinet to be connected to a central extraction system. Technical Data: External dimensions: Width 1145 mm x Height 1880 mm x Depth 1810 mm Dimensions of the heating chamber: Width 850 mm x Height 690 mm x Depth 1410 mm Volume of the heating chamber: approx. 830 liters Weight: approx. 230 kg, cart 50 kg Temperature range: 10°C above ambient temperature to +120°C Spatial temperature consistency: ± 1°C Temporal temperature consistency: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug Power consumption: 4.5 kVA Fusing: 3 x 16 AT, 1 x 6 AT Control: Digital controller Safety device: adjustable over-temperature protection Through-hole: Exhaust nozzle 100 mm with regulating flap at the top Intake nozzle 100 mm with regulating flap at the top Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2007, operating hours: 500 h, condition: reconditioned (used), functionality: fully functional, length of welding knife: 1,200 mm, welding power (max.): 12 kVA, width of welding knife: 20 mm, machine/vehicle number: 1157, High frequency welding machine to be overhauled 40cm arm, 1200x20 electrode, 12KW Godpfxs Air N Ue Acgoui New bench to be redone of the desired length, price based on the length of the bench The price indicated is related to the machine on 8 meters of bench 1 year warranty