Used Heated for sale (13,171)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Industrial steam boiler system (2 units) Manufacturer: Viessmann Model: Vitomax 200 HS Year: 2005 Steam capacity: approx. 2,300 kg/h Operating pressure: 10 bar Burner: Manufacturer: Weishaupt Model: G8/1-D Power range: 400 – 2,275 kW Year: 2005 Redpfx Acjyxtdtevor Used, in good working condition. Inspection possible upon request. - Boiler unit - Burner - Control panel - Accessories as shown in the pictures EUR 10,000 each Ex works (EXW), Belgium

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating Rjdoyt Ihbepfx Acvsr • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: ready for operation (used), Year of construction: 2003, WVT Bioflamm heating system / wood chip heating system with discharge Rated output: 291 kW Rsdpfx Asywn Nnscver Year of manufacture: 2003 Fuel: Biomass Factory number: 1217 Water content: 1670 liters Including discharge auger, agitator, and rotary valve Discharge is suitable for a silo size of 5 - 6 m. The system is still installed and must be dismantled by the buyer. The system is being sold on behalf of the customer and is immediately available. Location: Postal code 54 Subject to prior sale If you have any questions, just write to me and I will provide you with the contact details of our customer.

Condition: like new (used), Ling Systems Stainless heat shrink tunnel Roded I Ncbspfx Acver stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

Year of construction: 2020, operating hours: 20 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ?, B-Max 300 Biomass / pellet boiler, directly from the NL importer. System with very few operating hours. In good condition, see photos. Redpfx Ajyxtazscvjr

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW Rodpfju U Ey Iex Acver - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Rodpfsyh I Unjx Acvjr Weight: Estimated: Kg 690.0

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Weight: Actual: Kg550.0 Rodpfxsyh I Uhe Acver Dimensions: 650 X 3000

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: Impaero, 3.1 General Description of the Basic Unit The Impaero is an air handling unit that refreshes indoor air and provides energy-efficient heating and/or cooling. The purpose of the Impaero is to create an optimal indoor climate in commercial spaces with minimal energy consumption. The Impaero is a modular system. Depending on customer requirements, various modules can be added to expand the functionality of the Impaero. Rsdpeyxbzmofx Acvjr

Year of construction: 1986, condition: used, machine/vehicle number: 860918, cooling capacity: 11165 W/9600 kcal max. outside temperature: 32°C max. working pressure: 24 bar electrical connection: 380 V, 4,12 kW Rsdpfobac Tmjx Acvor place requirement: 860 x 760 x 1360 mm

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high tested maximum temperature: 1000°C Rodpfobn I Tzex Acvjr electrical connection: 400 V, 13 kW space requirement: 550 x 1600 x 1830 mm Weight: 492 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 250 kW (339.91 HP), Warm air generator for wood pellets and/or wood chips, with power ratings from 250kW to 500kW. Suitable for heating industrial halls, buildings, warehouses, as well as for drying processes such as hay, grass and other crops. Burners are compatible with biomass wood chips and pellet granules. Warm air capacities from 200kW to 500kW. Available in 40FT or 60FT containers. Lanox BV The Netherlands. Rjdpfxjyaly Uj Acvsr

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – Hop in & get started! Are you looking for a reliable, modern, and ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with powerful performance, high-quality construction, and maximum comfort – perfect for construction, landscaping, and municipal tasks. Thanks to its compact design and modern load-sensing hydraulics, this machine is ideal for tight construction sites yet powerful enough for demanding earthworks and foundation projects. The enclosed, heated cabin makes the LT-20 PRO a truly professional all-year-round machine! ⭐ Your Benefits at a Glance ✅ Side-swing boom (boom swing) – ideal for working in confined spaces ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise & energy-efficient control ✅ Axial piston pump with variable flow rate ✅ Travel motors with high-/low-speed modes ✅ Double cast counterweights – increased stability ✅ Rugged 230 mm rubber tracks – durable & wear-resistant ⚙️ TECHNICAL SPECIFICATIONS Operating weight: approx. 1,800 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW / 16.1 HP Digging depth: up to 2,270 mm Digging reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Enclosed comfort cabin including heating ✔ Ergonomic joystick control ✔ LED work lights ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum load capacity INCLUDED IN THE SET: 3 BUCKETS The package includes 3 professional buckets: ✅ 25 cm trenching bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any job site immediately! ➕ OPTIONAL AT EXTRA COST Hydraulic quick coupler ➡️ Note: The quick coupler shown in the images is not included in the standard package and can be ordered as an option. Hydraulic tilt quick coupler (tilting function) ➡️ Note: The tilt quick coupler shown in the images is not included in the standard package and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12 months warranty Europe-wide Spare parts & service directly from our Rheda-Wiedenbrück warehouse IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Redpex Hg D Aefx Acvjr Europe-wide delivery can be arranged on request Location: Rheda-Wiedenbrück Our machines are available and ready to work immediately. You are welcome to inspect and test all our machines on-site. PROMOTIONAL PRICE €17,800 net (RRP) Special price possible – contact us today! Request your quote & secure your advantage! Demand is high – reserve your LT-20 PRO now. ➡️ Contact us directly via Machineseeker or give us a call – we are happy to advise you personally!

Condition: like new (used), Year of construction: 2015, operating hours: 27,000 h, functionality: fully functional, Used Combined Heat and Power Unit (CHP) Manufacturer: 2G Energietechnik GmbH Model: G4076 Engine: MAN Gas Engine Electrical Power: approx. 400 kW Voltage: 400 VAC / 24 VDC Frequency: 50 Hz Year: 2015 / 2017 Condition: Used, in working condition - Complete CHP unit - Control cabinet - Control system / HMI - Gas engine and generator Rjdpfx Aoyxl Uqjcvor - Delivery as inspected Price: EURO 125,000.-/EXW (Loaded) Location: Germany/Düsseldorf Delivery: EXW (Ex Works)

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum Rsdpfsyhc H Uox Acvsr - Gas powered oil heater and oil pump. More information to follow.

Condition: excellent (used), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heat Chamber The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. Thanks to its large useful chamber, it is possible to process large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Typical fields of application: Industrial production Plastics and metal processing Component drying Heat treatment Testing technology / Material testing Laboratory and research applications The system is of robust industrial quality and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Rjdpfxsytrzfe Acver Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety classes: TB Class 1 TWB Class 2 Interior: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm Load capacity: Internal chamber load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional data: Minimum exhaust air volume: 600 m³/h Reduced exhaust air volume: 150 m³/h Purge time: 465 s Total steam space: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Selectable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Any further questions can be answered by phone.

Year of construction: 2007, condition: like new (used), Technical data, please see in pdf document. Rodpfxeha Dm Ts Acvjr

Condition: used, functionality: fully functional, El. heated chamber oven, make Heraeus Type: BT 5042 Temperature: 250°C Rjdpfxjxlruzs Acvor Clear dimensions (W x D x H): 390 x 285 x 350 mm

Condition: used, functionality: fully functional, El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Temperature: max. 450°C Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm Redpfjxmhhaox Acvsr

Condition: used, Electrically heated tempering furnace with protective atmosphere Type: TSK-8-10-12-80 Temperature: max. 950°C Internal dimensions (W x H X D):800 x 1050 x 1200 mm Heating power: 80 kW Rodpfx Acsxcphmevjr Atmosphere fan: 4,0 kW

Condition: used, El. heated chamber oven, make Heraeus Type: T 340 Temperature: 250°C Rjdpfjxlr Nlex Acvor Clear dimensions (W x D x H): 300 x 280 x 270 mm

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Rodpfx Acovgbdrjver Operating hours: 42 000 Year of construction: 2014 Complete system in container (12 x 4.5 m) with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Ready for immediate use! Further details on request

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor Rjdpfsym Rudjx Acvjr outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control system. Rodpfxeyivr Tj Acvor

Condition: as good as new (ex-display), Year of construction: 2011, Used storage tank made of steel according to EN 12285-1 (with test certificate) double-walled, for underground storage of fuel oil and diesel fuels, 1 dome (alternatively 2 domes possible). Capacity: 100,000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18,800 kg In addition, we can also equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detector - Dome shaft with shaft cover in walkable or traversable drive-over design - Partition walls (as multi-chamber tank) - Interior coatings (e.g. 2-component epoxy resin), partial or full linings - Content and level measuring devices as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Dispensers for diesel, biodiesel and gasoline - with complete tank data acquisition on request - External tank insulation with PU foam Rjdpfx Acoi Enxdovjr Tank is cleaned inside and outside coating is overhauled and checked with 14 kV. A cost-effective delivery with our own truck is possible. Just tell us the delivery place, you will get the exact freight cost immediately. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.