Wood combustion plant
Bjouxxxwpy
Schmid UTSR 450
Year of manufacture 1997
Nominal power 450 kw/h
Very well maintained condition, no maintenance backlog or similar.
Underfeed grate firing with 3 flue passages or 2 pcs. vaulted ceilings
Flue pipes with tubolators and 5 pcs. cyclones.
Flue gas pipe DN 350
incl. set of arched bricks, brass grate bearing 2016 renewed
However, two years ago the boiler had to be welded approx. 15 cm, at present the system is completely pressure-tight!
The boiler has al...
It is a wood-chip heating system installed in the container. It can therefore be installed with maximum convenience at any location.
Heat output: approx. 900 KW
Fuel: wood chips, bark, other wood waste
Gwljgc
Moisture content: 15-60%.
Medium: Hot water.
Charging: hydraulic feed through pre-drying channel.
Firing: moving grate
ash removal: fully automated
Control: fully automated
The system has been professionally maintained by us and is fully operational. It is being replaced because our heating...
Heating BINDER / Austria
Type: RRK 1000
Year of construction: 1997
Performance: Max 1,000 kW
Combustion: thrust grate-firing type SRF
Bdunawohsi
approved fuels: for all wood fuels from dry (W5) to wet (W50)
Ash: Yes
Accessories: flue gas dust extractors type MZA 1000, electric control system, pumps and valves, compl. Documentation;
Bunker discharge: floor L x b 5.5 x 3.5 m; 2 hydraulic cylinders, transverse conveyor;
afogrill can be used a lot
Bpdyyeex98
o Power 46 Kw- 3 zones
o Mat width 200; Height 60.
Hvmz9d9
o Heating length 2500 mm
Paddle mixer
Motorvermogen 11kW
Lengte 4000mm, breedte 460mm.
Verwarmbare trog.
Geheel geïsoleerd.
Cdyivvol
Evt. Bijpassende verwarmbare pijpschroeven
Linear oven Heat and Control
Used Linear Oven
Electric power supply
Belt width: 600mm
Manufacturer: Heat and Control
Model: 25.21
Height: 2350 mm
Width: 1600 mm
Length: 9500 mm
Electric power supply: 400V 50Hz 3N
Xylb0
Total power: 150 kW
Condition Used
Bnnvely3rt
This listing is for a Cellpath 110-240 Vac Heat block
* General * SKUR0849 * LocationBarneveld * MakeAlfa-Laval (FR) * TypeMINI II * No.19506 * Year of construction1993 * Material * MaterialStainless steel 1.4404 (316L) * Pressure * Working pressure shell5 Bar * Working pressure tubes6 Bar * Tubular vacuum possible * Key Features * Heat exchanger"Spiral Mini II" * Vertical * Heating surface2.36 m2 * Tube capacity8 ltr * Tube diameterA 5mm, B 5mm, 200mm * Max. temperature-20/200 degr.C * Shell capacity40 ltr * Shell diameter355mm * Information * Wei...
Conveyor screw, screw conveyor, conveyor technology, pipe conveyor screw, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, screw dryer, drying system, belt dryer for digestate, grain, wood chips, sewage sludge
-Screw was designed for a heating plant to discharge the ashes and was not yet in use
-Screw tube and screw are double-walled and can therefore be cooled or heated
-Execution: stable
-Inlet: 1380 x 340 mm
-Spout and control flange: ...
Carousel Heat Transfer Press.
Bsq3dczcc8
2009, stainless Saxon sealer mounted on variable speed conveyor, adjustable temp controls, conveyor dimensions 2000mm x 330mm, height adjustable frame, 1Ph
Btfaumhpbv
General Location Bremen Condition used Other
make: Apaco
Flhm3yo
product room:
capacity: 150 litres
perm. operating overpressure: -1/+3,2 bar
perm. operating temperature: 5/200°C
Heating/cooling chamber:
capacity: 100 litres
perm. operating overpressure: 6 bar
perm. operating temperature: 5/100°C
Heat exchanger last Intended use Pharmaceutical chemistry Type plate Insulation available Insulation material Armaflex
Condition Used
2smlp0jz
This listing is for 1 of 2 Ortho Biovue System Heat block-32
* General * SKUR0848 * LocationBarneveld * MakeJaeggi Bern (CH) * No.2233 * Year of construction1993 * Material * MaterialStainless steel 1.4435 (316L) * Pressure * Working pressure shell16 Bar * Working pressure tubes10 Bar * Key Features * Heat exchanger * Horizontal * Heating surface26.5 m2 * Tube capacity125 ltr * U-type * Number of tubes:89 * Tube diameter16mm * Tube length3000mm * Wall thickness tubes1,0mm * Max. temperature-30/250 degr.C * Shell capacity175 ltr * Shell connectionsDN40, DN...
Plate heat exchangers, heat exchangers, heat exchangers
-with: control flaps electr. driven
-Number: 4x exchangers available
-Price: per piece
Qlh8pclhm
-Dimensions: 510/400/H500 mm
-Weight: 25 kg/piece
Muller Graphic heat Drying tunnel (80 degrees),
band width 120 cm
Technically in good condition, total length 8 m, consisting of:
1x 1.5 m walk-in
2x 2 mtr. heat section (85 degrees Celsius)
1x 2 mtr. cool section
1x 0.5 m spout
E3beoet
Transport and installation: On request.
Chip conveyors, conveyors with coolant tank BMF type PES 63/30-200 Z 60
Masch. Nr: 97 22978-1001 ident. No.: 1039276 year of construction 1997
Metal links width 200 mm
Distance follower bars approx. 300 mm
H9fe0mjtw
Length of the possible chip removal 900/1250 mm
Slot length 1000 mm
Shelf height 260 mm
Rack width 350 mm
Hopper width above 280 mm
Hopper width below 165 mm
Head – discharge height 800 mm
Belt speed 26 mm / sec. = 1.6 m / min.
Motor power belt drive 0.25 kW
Engine coolant pump 1.7 k...
General Location Bremen Condition used Remarks Shell made of heat-resistant structural steel: permissible operating overpressure: 72 bar; permissible operating temperature: 300° C; capacity: 400 litres; tubes made of titanium II: permissible operating overpressure: 200 bar; permissible operating temperature: 300°C; capacity: 100 litres
L3dupu2
Heat exchanger Technical documents Drawing,Acceptance certificate last Intended use Chemistry
Technical data / dimensions Total length 8.512 mm
Condition Used
Bppoi8lbbj
This listing is for a Grant UBR2 Heat block
* General * SKU309N504 * LocationBarneveld * MakeFalk Gmbh&Co KG * No.24320 * Year of construction2007 * Material * Shell materialStainless steel 1.4571 (316Ti) * Pressure * Working pressure shell0.49 Bar * Working pressure tubes6 Bar * Material * Tube materialStainless steel 1.4571 (316Ti) * Key Features * Heat exchanger * Horizontal * StoomwezenAD2000 * Heating surface25m2 * Tube capacity140 Ltr * Number of tubes:64 * Tube diameter25,4mm * Tube length5000mm * Wall thickness tubes1,6mm * Max. t...
Here we offer a Vötsch heating and drying oven.
Sizes VTL 125/200
Usable space dimensions:
Width 1250 mm Height 2000 mm Depth 1250 mm
Outside dimensions, max:
Width 2150 mm Height 2890 mm Depth 1700 mm
Volume:
Usable space volume 3.125 m³
Weights:
Empty weight 1100 kg
Load on floor 400 kg
Load floor stow. 1000 kg
Electrical power:
Rated power: 36.0 kW
Connected load: 40,0 kW
Rated current: 60 A
Rated voltage 400V
Compressed air supply
connection pressure: 4 ... 6 bar
Flow rate: 35 m³/h
Compresse...
used, good condition Made by Höcker Polytechnik Dimensions 2500 mm x 2600 mm x 7900 mm Transport dimensions 2.8 x 2.75 x 8.15 m Raw air with filter Filter area approx. 188 m² Filter hoses 64 pcs. Diameter x length 250 mm x 3750 mm Filtermat BIA polyester needle felt Motorized filter cleaning Injection nozzle diameter 550 mm Exhaust connection approx 900 x 400 mm, currently sealed Chip space approx 2.5 x 2.5 x 2.5 m approx. 12 m³ chip volume 2 pieces explosion rupture discs 750 x 550 mm 3 pieces ...
Plate heat exchangers, heat exchangers, heat exchangers
Bjq8ndml88
-Application: biogas plant; Waste heat
-Pipe diameter: DN160
-Temperature range: 0 °C to +80 °C
-Dimensions: 5680/500/H2050 mm
General condition used
Heat exchanger last application Pharmacy Name plate Material insulating jacket Stainless steel
Jacket volume Jacket volume 4 litres Jacket material AISI316 (V4A) 1.4571 Max. permissible operating temperature Jacket volume 100 °C
Pipe chamber volume Pipe chamber 3 litres Material pipes AISI316 (V4A) 1.4435 Max. permissible operating temperature Pipe chamber 100 °C Max. permissible operating pressure Pipe chamber 11.0 bar
Technical data / dimensions Total length 2,650 mm
Lze...
Condition Used
P8sne7
This listing is for a Qiagen Rotor-Disk Heat SealerThe Rotor-Disc Heat Sealer is used to seal Rotor-Discs for the Rotor-Gene Q. Rotor-Discs do not use caps. Instead, Rotor-Disc Heat Sealing Film is applied and sealed using the Rotor-Disc Heat Sealer. The film prevents contamination by providing a strong, durable, and tamper-proof seal.
* General * SKU309N500 * LocationBarneveld * MakeFalk gmbh & Co. KG * No.3304 * Year of construction2007 * Material * Shell materialStainless steel 1.4571 (316Ti) * Pressure * Working pressure shell1 Bar * Material * Cover materialStainless steel 1.4571 (316Ti) * Pressure * Working pressure tubes4 Bar * Material * Tube materialStainless steel 1.4571 (316Ti) * Key Features * Heat exchanger * Horizontal * StoomwezenAD2000 * Heating surface150,5 m2 * Tube capacity830 Ltr * U-type * Number of tubes:...
12
Chip bucket
external dimensions: 700x420x750 mm
Empty weight: 20kg
Btz7kooyfn
Type: MME 200 - Condition: function-tested, very good, second-hand - galvanized filter cladding - filter area approx. 20 m² - fan 4 / kW / 200 mm - pressure 210 Pa - air performance 2600 m³/h
O9j99
Solid state relays, switchgear, switching components
-Manufacturer: Gavazzi
-Type: RAM1A69D100 3 pieces mounted on heat sink
C7nkjxr
-Price: complete
-Dimensions: 300/200/H80 mm
-Weight: 3.3 kg
General Condition unused
Heat exchanger Technical documents Drawing Exchange surface 4,0 m² Last use Pharmacy Type plate Year of construction 2002 Insulation available Material insulation jacket Stainless steel
Stsiqo
Shell space Volume shell space 9 litres Material shell AISI316 (V4A) 1.4571 Max. permissible operating overpressure shell space 10,0 bar Max. permissible operating underpressure shell space 1,0 bar Max. permissible operating temperature shell space 50 °C
Pipe chamber Volume of pipe...
Length 8500 mm, width 550 mm
Bijzkco30i
* General * SKUR0830 * LocationBarneveld * MakeJaeggi Bern (CH) * Type35 M2 * No.1894 * Year of construction1990 * Material * MaterialStainless steel 1.4435 (316L) * Pressure * Working pressure shell6 Bar * Working pressure tubes10 Bar * Key Features * Heat exchanger * Horizontal * Heating surface35 m2 * Tube capacity164 ltr * U-type * Number of tubes:120 * Tube diameter16mm * Tube length6000mm * Wall thickness tubes1mm * Max. temperature-30/200 degr.C * Shell capacity206.3 ltr * Shell diameter4...
15
Manufacturer: Heppan
Steel tipping body for forklift truck
Btxzwzwlsr
Outside dimensions: 680x1100x1050
Empty weight: 108kg,
ELECTRICAL FURNACE WITH TRANSPORTBELT
FOR HEAT TREATING UNDER PROTECTIVE GAS DOMAIN
handling: annealing and relaxing
Technical details:
Max. working temperature: 900 degrees
Numbers of zones with separate temperature regulation: 3
Hnoiuhax
- automatic transport system for loading and unloading!
Solid state relays, switchgear, switching components, solid state contactor
-Manufacturer: Siemens, Sirius solid state relays
-Type: 3RF2255-1AC45 3 pieces mounted on heat sink
Bossbd2peb
-Price: complete
-Dimensions: 200/95/H160 mm
-Weight: 2.7 kg
General Location Bremen Condition used Remarks Room 1: Capacity: 15 liters; max. operating pressure: -1 bar; max. operating temperature: 150°C; Room 2: Capacity: 4 liters; max. operating pressure: 5 bar; max. operating temperature: 50°C; front heads made of Fe, pipes made of stainless steel
Heat exchanger of last use Food colouring Nameplate
Jacket chamber Material jacket AISI316 (V4A) 1.4571
Technical data / dimensions Diameter inside 140 mm Total length 1,500 mm
L20dka0
Condition Used
B8ceue7y
This listing is for a Pierce Reacti-Therm 111 Heating module 18840
* General * SKUR0851 * LocationBarneveld * MakeJaeggi Bern AG (CH) * No.630863724 * Year of construction1986 * Material * MaterialStainless steel 1.4435 (316L) * Pressure * Working pressure shell6 Bar * Working pressure tubes3.2 Bar * Tubular vacuum possible * Key Features * Heat exchanger * Vertical * Heating surface2 M2 * Tube capacity11 ltr * Number of tubes:66 * Tube diameter16mm * Tube length600mm * Max. temperature100 degr.C * Shell capacity12 ltr * Shell diameter210mm * Shell length900mm ...
Used horizontal Sinclair Stainless Fabrications approximately 45.99sqmt horizontal stainless steel shell and tube condenser.
Unit has (208) approximately 28mm diameter x 2,500mm long stainless steel tubes rated 4.4 bar design pressure at 40 deg.c. Stainless steel shell rated 3 bar design pressure at 260 deg.c. and includes stainless steel expansion bellow.
Unit has (2) stainless steel heads. Unit is mounted on mild steel frame.
C7n2iwr
** Process Equipment Ltd buys and sells high quality used...
- KOM 1559 -
General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition.
Oxcuz
Stainless steel, VA, chrome nickel steel, cut-to-size materials, stainless steel, chrome steel, rust-free
Boehmcjdbb
-Material: cuts and manufacturing
-Round steel, tubes and sheets
-various materials: in stock
-Material numbers: 1.4828, 1.4876, 1.4841, 1.4878
-Please inquire about the: material you want with dimensions.
-Price: per kg and cut
General condition used Remarks outside polished; possibly unused
Heat exchanger Technical documents Drawing Exchange surface 2,12 m² Last use Distillate cooler (1000 l/h; Pharmacy) Type plate Year of construction 2006 Insulation available Material insulation jacket Stainless steel
Shell space Volume of shell space 27 litres Material of shell AISI316 (V4A) 1.4404 Max. permissible operating overpressure of shell space 8.0 bar Max. permissible operating temperature of shell space 100 °C
Pipe chambe...
Flame heating device Roland Groß Söhne GmbHRing burner for heatingType 1 x 1" IonisationFabr. No. ALMA 01 Year of construction 03/2010Connection voltage: 230 VoltPe gas max.: 500 mbarPe air max.: 10 barVgas max.: 30 Nm3/hVluft max.: 300 Nm3/hIncluding 10 pieces of different flame ring nozzles - flame monitoring Hans Henning ring nozzle hinged out of 2 half shells, inside Ø 310 mm, with hose plug coupling and ignition device, air outlet front ring nozzle hinged out of 2 half shells, inside Ø 4...
* General * SKUR0874 * LocationBarneveld * MakeJaeggi Guentner AG (CH) * No.2612 * Year of construction1996 * Material * MaterialStainless steel 1.4435 (316L) * Pressure * Working pressure shell16 Bar * Working pressure tubes10 Bar * Key Features * Heat exchanger * Horizontal * Heating surface26.8 m2 * Tube capacity125 ltr * U-type * Max. temperature-30/250 Degr.C * Shell capacity175 ltr * Max. temperature-30/250 Degr.C * Information * Mounted on legs What you can expect from Foeth: all our mach...
Motor: 5,5 kW
pipe connection: 250 mm
2800 rpm
Air capacity 5600 m³/h
Steel impeller
Jwttqm
Well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition.
Brog9gmo7l
Heat exchangers, building heating, building dryers, heat exchangers, heating, hall heating, hot water exchangers
-Type: HX 60
-Power: 43.5 kW
Oxmst
-Number: 10 pieces available
-Price: per piece
-Dimensions: 660/720/H1065 mm
-Weight: 106 kg
-Can be used in conjunction with Wacker Neuson HP 252 as hall heating/building heating, not included