Ultrafilter ultraaqua autoclean 0016 AC condensate treatment filtration unit

Donaldson ultraaqua autoclean 0016 AC

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 11,700 h, power: 8.9 kW (12.10 HP), travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 27,000 rpm, The machine is used for fine machining of small pieces. (Al, steel) Rcjdpfxoq N Ayfj Akijh

Condition: used, Year of construction: 2015, CMZ TX 66 Y2 Quattro Year 2015 Fanuc 31i control Maximum turning diameter (mm): 255 Distance between spindle centers (mm): 639 Maximum speed (rpm): 4000 Rcsdpszp Itujfx Akioh Maximum bar diameter: 66 mm X-axis: 190 mm Y-axis: +- 40 mm Z-axis: 500 mm Chuck: 210 mm 2 BMT 55 tool heads 2 spindles 2 Y-axes Spindle bore: 66 mm Tool probe Chip conveyor Tooling included Documentation

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: Rcjdpfx Aovtz Dxjkioh - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf

Condition: good (used), Year of construction: 2014, Has been serviced regularly. Rsdpfxevmpt Uj Akioch Technical values: 81.2 L/s, 13 bar. Connection values: 400V / 50HZ, 26kW Width: 1260 mm Depth: 860 mm Height: 1500 mm Weight: 520 kg

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH Rcedpfx Aeh Rdxnekijh *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, Year of construction: 2014, Manufacturer Citizen Machinery Miyano Co., Ltd., Japan Model BNA 42DHY2 Year of Manufacture November 2014 Serial Number DK4Y1085 Control Fanuc Series 0i TD CNC Machine Type CNC Twin Spindle Turning Center with Y Axis Country of Manufacture Philippines Capacity Maximum Bar Capacity: 42 mm Maximum Turning Diameter: Approx. 42 mm Maximum Turning Length: Approx. 100 mm, depending on workholding Main Spindle: Built in spindle Sub Spindle: Yes Y Axis: Yes C Axis: Rcedpfjzmh R Uex Akijh Main and Sub Spindle Turret: 12 station live tooling turret Live Tooling: Yes Travels X Axis: Approx. 135 mm Z Axis: Approx. 320 mm Y Axis: Approx. ±40 mm Spindle Main Spindle Speed: Up to approximately 6,000 rpm Sub Spindle Speed: Up to approximately 6,000 rpm Spindle Nose: 42 mm bar capacity Rapid Traverse X Axis: Approx. 24 m/min Z Axis: Approx. 30 m/min Y Axis: Approx. 12 m/min Electrical Power Supply: AC 200 V Phase: 3 Phase Frequency: 50 / 60 Hz Rated Power: 30 kVA Full Load Current: 87 A Short Circuit Interrupt Rating: 2.5 kA Machine Weight Weight: 3,100 kg Equipment Visible on This Machine Fanuc Series 0i TD CNC Control Twin Spindle Y Axis C Axis Live Tooling Hydraulic Chuck Coolant System Fully Enclosed Splash Guard Emergency Stop Electronic Handwheel

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, NAKAMURA-TOME SC-100X2 Technical Specifications L-Spindle (Main Spindle): Bar capacity Ø51 mm / 6,000 rpm R-Spindle (Sub Spindle): Rcodpfxey A Exkj Akish Bar capacity Ø42 mm / 6,000 rpm Machine Features: Two tools in cut (simultaneous machining with two tools) Lower turret + 2-axis machining on R-spindle Easy-to-use Superimposed Cycle Standard Equipment: Milling and Y-axis are standard L-spindle motor: 11 / 7.5 kW R-spindle motor: 7.5 / 5.5 kW Milling motor: 7.1 / 2.2 kW / max. speed 6,000 rpm Lower turret equipped with manual unloading gripper Lubrication oil recovery system (standard specification) Environment-friendly inverter-type hydraulic unit

Condition: used, Year of construction: 2018, functionality: fully functional, Hwacheon T2-2T YSMC dual turret and dual spindle CNC lathe, year 2018, equipped with SIEMENS SINUMERIK 840-D control, high-performance machine for complex and simultaneous operations, ideal for high-precision series production. Main technical specifications: Max. swing diameter over bed: Ø 880 mm Max. turning diameter: Ø 460 mm (main spindle) / Ø 390 mm (sub-spindle) Turning length: 444 mm (upper carriage) / 437 mm (lower carriage) Bar capacity: Ø 65 mm (main and sub-spindle) Axis travels: X1: 245 mm / X2: 210 mm Z1/Z2: 520 mm Y: ±50 mm (total 100 mm) Rjdpjwt S N Dsfx Akioch B: 550 mm Rotary axes C and A: Resolution 0.001° (360°) Spindles: Speed: 50 ÷ 5,000 rpm Power: 11/15 kW Spindle nose: ASA A2-6 Sub-spindle chuck: Ø 210 mm Tool holders: Upper/lower turret: 12 stations each, driven Driven tools: 6,000 rpm, power 5.5 / 7.5 kW Tool size: 25x25 mm (turning), Ø 40 mm (boring) Rapid traverse: X1/X2/Z1/Z2/B: 30,000 mm/min Y: 15,000 mm/min Included accessories: TOP AUTOMAZIONI MAGIC bar feeder TOP AUTOMAZIONI RETURN D.65 automatic parts unloader Chip conveyor Coolant tank with pumps and two high-pressure pumps Various fixed and driven tool holders Tool presetting arm with dual head Manuals, electrical diagrams, CE declaration Complete and high-performance machine, perfect for high-productivity multitasking turning.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 8 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 210 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] Rsdsv R Hwfspfx Akisch - Max. bar diameter : 65 [mm] - Max. chuck diameter : 210 [mm] - C axis indexing precision : 0,001 [°] - Travel : 550 [mm] UPPER RIGHT TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 245 x 520 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.5 [kW] LOWER LEFT TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 210 x 520 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.5 [kW] POWER SUPPLY - Total installed power : 85 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 5000 x 3500 [mm] - Machine height : 2500 [mm] - Machine weight : 9500 [kg] MACHINE HOURS - Number of working hours : 5811 [h] EQUIPMENT - CNC : Fanuc 31i-Model A - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump : 2 x 15 [bars] * with cooling unit for coolant - Chips conveyor : Droite - Parts catcher - Parts conveying strip - Bar loader : IRCO SIMAG 70.1 - Tool probe - Number of turning tool holders : Porte-outils radial x3 / Porte-outils axial x2 - Number of fixed tool holders : Voir photo - Collet chuck : 2 x HAINBUCH

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic BMSY 320 DGH Saw band dimensions: 4160x34x1.1 mm Band speed: 20 - 100 m/min, continuously variable Cutting capacity 0° rectangular: 450x320 mm, round 320mm Redog Ekp Nspfx Akioch Cutting capacity 30°: round 320 mm, square 320 mm, rectangular 410x320 mm Cutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mm Cutting capacity -30°: round 320 mm, square 320 mm, rectangular 420x320 mm Cutting capacity -45°: round 320 mm, square 320 mm, rectangular 340x320 mm Cutting capacity -60°: round 240 mm, square 220 mm, rectangular 230x220 mm Working height: 860 mm Coolant pump motor: 0.12 kW Hydraulic motor: 0.37 kW Motor: 2.2 kW Length: 2260 mm Width: 1160 mm Height: 1700 mm Weight: 1030 kg Double miter saw Continuously variable band speed Hydraulic vise High-performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for the miter angle