Used Hakomatic B 45 for sale (27,843)

Condition: used, functionality: limited functionality, Year of construction: 1989, operating hours: 9,044 h, load capacity: 3,000 kg, lifting height: 3,600 mm, free lift: 600 mm, fuel type: diesel, mast type: simplex, construction height: 2,660 mm, fork carriage width: 1,210 mm, fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 3,800 mm, drive type: Diesel, construction width: 1,980 mm, Side loader forklift Load centre: 600 Fork width: 150 mm Fork thickness: 50 mm Kfodpfx Aasw Ul Hqs Eea Mast type: Standard Condition: Not operational Technical condition: Poor Front tyre type: Pneumatic Front tyre size: 27x10-12 Rear tyre type: Pneumatic Rear tyre size: 27x10-12 Description: In addition to this Battioni & Pagani model, we have around 200 heavy duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing and financing at favourable terms are always possible. We are also happy to purchase your used equipment outright, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this HT3T. P.S.: Our master forklift workshop specialises in repair, refurbishment, overhaul, and custom builds for forklifts over 8 t. We are also happy to offer your vehicle for sale on a commission basis.

Condition: like new (used), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 20700114-2016, year of last overhaul: 2025, Equipment: documentation/manual, Piston pump for sale due to surplus. It was only used to spray four front doors with water-based high-build coating, so it is practically as new! Without spray gun. Kfodpfjxyt T Usx Aa Eea Service and spare parts are easily available from Hendrichs, Eupen or B&M.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 982 mm, total length: 1,640 mm, total width: 435 mm, Tested forklift battery for your forklift – 80V 4PZS 620Ah – custom tray + 1-year warranty + incl. aquamatic system + incl. end conductors & REMA 320 plug (other plug types can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Delivery year: 2024 Dimensions: Length: 1,640 mm Width: 435 mm Height: 982 mm Kjdpfx Aajwzvyvo Esfa Weight: approx. 1,600 kg Suitable for the following models and more: Dimos DMS 40/45 Common battery sizes available, please enquire. Transport possible.

Condition: excellent (used), Year of construction: 2021, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor Manufacturer: B Kfjdpfxjxt Dx Uj Aa Eja

Condition: used, functionality: unexamined, Ferwood Code: RU0009348 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Kodpfjv Hzukox Aa Esfa

Condition: used, B&R Provit controller 5C2001- removed from Battenfeld BA 6 CDC - removed from running machine - fully functionalmanufacturer: B&R manufacturer no.: 5C2001.18 spare part no.: BR177 If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Kfedpfoiyzv Sox Aa Esa Dition: gebraucht

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 7,355 h, load capacity: 5,000 kg, lifting height: 5,950 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, fork carriage width: 1,250 mm, fork length: 1,400 mm, empty load weight: 11,951 kg, total length: 4,500 mm, drive type: Elektro, construction width: 2,200 mm, Electric side loader Load centre of gravity: 700 Fork width: 165 mm Fork thickness: 70 mm Ksdpju Dy Eyjfx Aa Esfa Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 27x10-12 Battery voltage: 80V Battery Ah: 840Ah Battery year of manufacture: 2015 Description: In addition to this Battioni Pagani model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this HT5EL P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Fork positioner, Telescopic forks: 1400 / 2400 mm Heating, full cabin, full free lift, Platform height: 850 mm

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Kfodpfx Aasxqgdne Eoa

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Kodpfx Aswzvxrja Eefa Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Very good condition, ready for production. The machine is equipped with a quick-action hydraulic unit. Kodox Hqmujpfx Aa Esfa Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply The machine can be used to produce labels, calendars, sample cards, etc.

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Kodjxcgytepfx Aa Ejfa

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F Kfodow Ah Nrjpfx Aa Esa - removed from running machine - fully functionalmanufacturer: B&R manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,597 h, load capacity: 5,000 kg, lifting height: 4,450 mm, free lift: 840 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 1,260 mm, fork length: 1,360 mm, empty load weight: 8,700 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,200 mm, Side loader Load center: 700 Fork width: 160 mm Kfjdswttrgspfx Aa Eoa Fork thickness: 65 mm Mast type: Standard Condition: Ready for use and fully operational Technical condition: Very good Front tire type: Pneumatic Front tire size: 27x10-12 Rear tire type: Pneumatic Rear tire size: 27x10-12 Description: In addition to this Battioni Pagani model, we have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing on favorable terms are always possible. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly advise you in detail about this HT5KU. P.S.: Our master workshop specializes in the repair, maintenance, overhaul, and custom manufacturing of forklifts from 8 tons upwards. We can also offer your vehicle for sale with us on consignment. 1x NIVO fork; telescopic forks 1360 / 2360 mm Heater, full cabin, Platform height: 820 mm

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit Ksdpfx Aexn N Anoa Ejfa -Manufacturer: B&R, ACOPOS P3 servo drive -Type: 8E14X5HWT10Dimensions: 375/70/H265 mm -Weight: 3.9 kg.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,925 h, load capacity: 8,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,550 mm, drive type: Elektro, Multi-directional forklift Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Battery year: 2023 Fork positioner, heater, full cab, Kedpfox Ef N Eex Aa Eefa

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Robatech Concept B 12/4 Tank capacity 12 litres, suitable for 4 hose connections. This glue unit has been fully tested and is fully operational. Additionally, you can order unused adhesive hoses (remaining from projects) at very competitive prices. We also have several refurbished glue heads in stock. Kfedpfew Rqmbjx Aa Eja

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, number of chambers: 4, Operational bulk material packaging machine. 4 chambers for film wrapping with widths of 1170, 1040, 870, and 760 mm. Ksdpfx Asx I Nqbja Esfa

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Kfjdpfsxcgygjx Aa Eja

Condition: used, Year of construction: 2019, functionality: fully functional, total width: 800 mm, total height: 2,100 mm, total length: 1,130 mm, Vertical glass washing machine with a washing height of 1000 mm. This washing machine is designed for integration into the outfeed conveyor of glass edging machines with vertical transport. It is equipped with two washing brushes: the rear brush is fixed in position, while the front brush can be adjusted in width manually using a handwheel, allowing the cleaning of different glass thicknesses. The wash water is blown off the glass panes (front and back) using air nozzles and then collected in a reservoir. The machine can be operated either with fresh water or via a separate water tank. It is currently set up for operation with fresh water. Water tank and pump are not included in the price. Modifications to the outfeed conveyor of the glass edging machine may be required for installation. Assembly can be carried out by us upon request but is not included in the scope of delivery. Kfodpfx Asxqmxxea Esa The pictures show an identical washing machine already installed at other customers—such as in a Bottero 810 BCS or a Bodo Gerhard K300. The washing machine offered here is in used but good condition. It has been thoroughly inspected, cleaned, and fitted with new wear parts by us.

Condition: good (used), Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Panel, Keyboard, Control Panel Teachpendant Kfjdsxnix Aspfx Aa Esa -Manufacturer: B&R, control panel Operator Panel with signal column -Type: 4PPC70.0702-20B -Signal tower: Banner TL50HGWRQ -Transport dimensions: 1000/420/H180 mm -Weight: 13 kg

Condition: excellent (used), Year of construction: 2005, For sale is a fully functional and very well-maintained dual-fuel burner from Weishaupt, including gas train (Dungs DN 65) 1. Burner type: Weishaupt RGL50/1-B Output: 600–5400 kW Version: ZM-NR Year of manufacture: 2005 For sale is a fully functional and very well-maintained dual-fuel burner from Weishaupt, including gas train (Dungs DN 65) 2. Burner type: Weishaupt RGL50/1-B Output: 600–5400 kW Kedpfx Aajwgbpaj Ejfa Version: ZM-NR Year of manufacture: 2013

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device Kfedpjxab Iyofx Aa Eja - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device Kfsdoxab Itepfx Aa Eoa - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, length 1500 x 740 x 780 innen mm Kfodsxab Imopfx Aa Esa weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Kfedpfoxabtvsx Aa Eja * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual