Used Hakomatic B 45 for sale (28,567)

Condition: used, B&R 2010 DO430 digital output - housing renewed - compatible with all B&R 2010 controls - removed from running machine - removed from Ferromatik MV 200-970 - fully functional manufacturer: Ferromatik Milacron type: B&R 2010 sparepart no.: 10010690 Chsdpfx Adsw Ah Nxjxsd manufacturer no.: 2DO430.6

Year of construction: 2008, condition: ready for operation (used), A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible. Cedpfexl Eltox Adxohd

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 5,600 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: standard, construction height: 3,500 mm, fork length: 1,400 mm, drive type: Elektro, Electric side loader Chjdeu Ac Afopfx Adxod Load center: 600 Mast type: Standard Technical condition: good Fork positioner, Hydraulic extendable forks 3rd valve, 4th valve,

Condition: used, functionality: limited functionality, Year of construction: 1989, operating hours: 9,044 h, load capacity: 3,000 kg, lifting height: 3,600 mm, free lift: 600 mm, fuel type: diesel, mast type: standard, construction height: 2,660 mm, fork carriage width: 1,210 mm, fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 3,800 mm, drive type: Diesel, construction width: 1,980 mm, Side loader forklift Load centre: 600 Fork width: 150 mm Fork thickness: 50 mm Mast type: Standard Condition: Not operational Technical condition: Poor Front tyre type: Pneumatic Front tyre size: 27x10-12 Rear tyre type: Pneumatic Chodpjw Ul Hqsfx Adxsd Rear tyre size: 27x10-12 Description: In addition to this Battioni & Pagani model, we have around 200 heavy duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing and financing at favourable terms are always possible. We are also happy to purchase your used equipment outright, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this HT3T. P.S.: Our master forklift workshop specialises in repair, refurbishment, overhaul, and custom builds for forklifts over 8 t. We are also happy to offer your vehicle for sale on a commission basis.

Condition: excellent (used), For sale: professional SK40 DIN 69871 AD/B tool holder with collet, ideal for use on CNC machining centers and milling machines. Designed for clamping milling cutters, drills, and other cutting tools. 📌 Specification: • Taper: SK40 DIN 69871 AD/B • Clamping range: Ø1–20 mm • Precision ER-type collets • Material: high-quality tool steel • Precision-machined for high rigidity and accuracy • Ideal for drilling, milling, and tapping ✅ Condition: used, in very good technical condition – ready for operation. ✅ Single pieces or larger quantities available for purchase. Codpfxoxla R Re Adxehd

Condition: excellent (used), Belt grinder with compressed air drive, The device requires water and compressed air connection, Codpsp N Duwjfx Adxjhd With the purchase of the device, new sanding belts worth €200 are included (free of charge). Dimensions of the product: Length: 470 mm, Width: 460 mm, Height: 170 mm. Weight: 5.6 kg.

Condition: used, B&R 2005 CP152 / 10010792 / CP152.9 - compatible with all B&R 2005 controls - housing intact or renewed - removed from running machine - fully functional manufacturer: B&R Chodpjimw Suofx Adxsd type: B&R 2005 spare part no.: 10010792 manufacturer no.: CP152.9 Dition: gebraucht

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Very good condition, ready for production. The machine is equipped with a quick-action hydraulic unit. Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Codpfxsxmvbnj Adxjhd Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply The machine can be used to produce labels, calendars, sample cards, etc.

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: standard, construction height: 3,080 mm, fork length: 1,400 mm, drive type: Elektro, Electric sideloader Load center: 600 Mast type: Standard Technical condition: good Codpfx Adju Acz Ijxehd Battery year of construction: 2021 Description: Battery year 2017 Hydraulic extension forks 1400/2450 mm Fork positioner, Hydraulic extension forks 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, total height: 765 mm, overall weight: 850 kg, total width: 1,000 mm, total length: 1,500 mm, Measuring and marking plate Cast iron Precision surface plate Manufacturer: FUJITA Type:JIS B 7513 Surface size: Length:1500mm Chsdowr Umpepfx Adxed Width:1000mm Height:250mm Flatness of the surface used (μm) Accuracy exceeding JIS standards Accuracy according to JIS standards No. 210 (Grade 0): 8 No. 211 (Class 1): 16 Weight: 850kg + support frame: ca 120kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Chedsxk T Igjpfx Adxjd

Condition: reconditioned (used), TILT-DOWN PLATES FOR BROOKS W= 39 cm L= 59 cm H= 4.5 cm Openwork Stackable approx. 260 pieces available for further questions please contact me Chodpfx Adjgh Hu Uexod

Condition: used, B&R Acopos 1016 servo drive- removed from Remak RX43 - removed from running machine Cjdpfxorr Egaj Adxshd - Fully functionalmanufacturer: B&R type: 1016 manufacturer no.: 8V1 Rev. H0Before purchasing, please check whether the Acopos you require also has an 18-pin grey connector. If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: good (used), pressing force: 150 t, Hammer weight: 150 kg Stroke: 480 mm Strokes: 168 p/min. Throat: 375 mm Ram diameter: 180 mm Country of origin: UK Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine weight: 6000 kg Chedpfx Aoubb Stsdxod

Condition: good (used), functionality: fully functional, 8LSA44.E3030D000-0 Chedpfxoufxvks Adxed IN 2,8A - MN 4,6NM - NN3000MIN' - IP64 - I0 3,7A M0 6,0NM - UN400Vac Serial number: 75480235523

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! Cedpfswav R Sox Adxshd If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), For sale: A set of professional SK40 tool holders in Ø12 size, brands HOLEX and Orion. All tool holders are manufactured according to DIN 69871 AD/B and are intended for CNC machining centers. Technical specifications: • Taper: SK40 • Clamping diameter: Ø12 mm • Length: 100 mm • Specification: DIN 69871 AD/B • Manufacturer: HOLEX and Orion • Condition: used, functional, in good condition (visible signs of use, do not affect functionality) Applications: • End mills Ø12 • Drills Ø12 • Countersinks Ø12 Chodpfxjxcy Tto Adxed

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Chjdpfxstv Ip Io Adxsd

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S - removed from running machine Cedpfx Aep Rb Hcjdxjhd - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: used, Year of construction: 2025, functionality: fully functional, overall weight: 53 kg, total width: 415 mm, total length: 800 mm, total height: 415 mm, noise level: 67 dB, Equipment: documentation/manual, type plate available, ATTENTION ! This is B-goods or a leasing return. The product is slightly damaged somewhere, has scratches or dents. All functions can be used without restriction. The device may also have very low operating hours. The filter media are generally new! The warranty period is 12 months. Extraction capacity filter unit at the nozzle*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 /H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany Chodpfsw Igmxex Adxed * Depending on the filter configuration Application: Separation of emulsion mist, for small to medium-sized machine workspaces. Scope of delivery: - Filter unit incl. washable pre-filter and H13 HEPA filter (new filter) - Documentation DE/EN/FR - Quality Made in Germany

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Chjdpfx Adjvyuy Hjxod Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: excellent (used), For sale: a set of professional SK40 AD/B 6×80 tool holders according to DIN 69871 standard. The holders are in good technical condition, complete – some fitted with VHM/HSS drills of various diameters. Shank diameter: Ø6 mm Length: 80 mm Clamping type: SK40, DIN 69871 AD/B standard Condition: used, fully functional, visible signs of use (discoloration from heat). Ideal for CNC machining centers, milling machines, and precision drill presses. Chjdpfxsxcx Uvo Adxjd

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. - taken out of running machine - fully functionalmanufacturer: B&R Chodpfxep Rb Iae Adxed type: 1022 manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: überholt

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Csdpfxsxcgyto Adxshd

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Chsdpfxexcgygs Adxjd