Used Hacker Zerhacker Wood Shredder for sale (16,634)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor, with reduced knife protrusion, suitable for both hard and soft materials + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour max. *Depending on screen and material. Significantly higher throughput with smaller wood waste. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Sample image above: color of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta starter - Fast hydraulic system - Automatic shutdown in rotor idle mode - Speed: 70–90 rpm for high throughput - Cycle control to minimize idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *Visible in the last 2 images. Iedsx Af Rdepfx Ag Usal - Additional blade row + €2,790 - Segmented bottom + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (Recommended for shredding plastics with screens under 15 mm or with a high fine fraction. Not necessary if bearings are lubricated about every 4 weeks of operation) - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Synchronous start-stop with shredder) - Enlarged feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - The infeed material must be free of metals and mineral impurities. Damage to the tools and/or increased wear may result otherwise.

Condition: excellent (used), Year of construction: 2006, Residual Wood Shredder Manufacturer: Untha Model: LR 630 Year of manufacture: 2006 Operating hours: approx. 5,241 h Power: 18.5 kW Hopper opening: 624 x 792 mm Hydraulic feed Number of knives: 17 Rotor diameter: 248 mm Screen diameter: 20 mm Dimensions: 1,740 x 1,170 x 1,680 mm Weight: approx. 1,300 kg Iajdex Dinvspfx Ag Usl An additional set of new cutting knives included.

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL DATA - Loading hopper inlet 1200x1000mm - Outlet for shredded wood ø 200mm - Rotor working width 980mm - Main motor 22kW - Number of knives 24 pcs - Knife dimensions 30x30mm - Screen 16/11mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H) 2600x2000x1720mm - Weight 2125kg Iodow S H Azspfx Ag Usal ADVANTAGES – German production – Auto-reverse – Feed drawer – Very good condition – Used wood shredder Net price: 95,900 PLN Net price: 22,830 euro depending on exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: good (used), functionality: fully functional, power: 37 kW (50.31 HP), Shredder Manufacturer: Weima Model: WL12 Shredder for pallets, MDF, and all types of residual wood Iaedpfx Aex E Rkdsg Uol Feed opening: 1200 x 1200 mm Hopper capacity: approx. 2 m³ Slow-speed machine with hydraulic pusher floor Performance depending on material: 2 – 4 hopper fillings per hour Motor: 37 kW Shredder rotor with 8 x reversible knives (indexable breaker plates) Knives can be easily and quickly rotated or replaced via screws Knife shaft/rotor diameter: 368 mm Rotor speed: 90 rpm 64 knives Extraction nozzle diameter: 200 mm Air velocity at extraction nozzle: 28 m/sec Rotor and gearbox replaced 6 years ago Dimensions: 2500 mm x 1900 mm x 1750 mm (LxWxH) Weight: approx. 3,300 kg

Condition: like new (used), engine power 18.5 kW hydraulic pressure drawer Ijdpfjx Uqubsx Ag Uoal 15 mm screen year of manufacture 1994

Condition: repair required (used), Old Bruks chipper drum and partly body. Good project for building - re-chipper for small pellet or briquet factory. Iedpfx Agjq E N U Uo Ujal

Condition: excellent (used), Year of construction: 2022, operating hours: 250 h, functionality: fully functional, NSL 130-45B chipper for sale in Poland Zerspaner NSL 130-45B 45 kW Rotor Ø 352 mm Die Einwellen-Zerspaner der NSL-Baureihe zeichnen sich durch eine äußerst robuste Technik aus. Für Holzabfälle in Schreinereien und der holzverarbeitenden Industrie haben sich Zerspaner mit Einwellentechnik am Markt durchgesetzt. Die Zuverlässigkeit und die solide Technologie machen unsere Maschinen zu einer hervorragenden Wahl sowohl für die Industrie als auch für den Handwerker. Der Schneidrotor mit seinen dreh- und auswechselbaren Schneidwerkzeugen liefert eine hohe Zerkleinerungsleistung bei gleichzeitig wirtschaftlichem Energieeinsatz. Bei unseren Zerspanern wird durch eine lastabhängige Schiebersteuerung eine continuierliche Zerspanung ohne Blockaden ermöglicht. Der NESTRO-Zerspaner wird kosmet mit Schaltschrank und 5 m Kabel geliefert, der Schaltschrank ist für eine Wandmontage vorgesehen. Technische Daten: • Spannung / Frequenz: 3-phasig, 400 V / 50 Hz ±5 % • Antrieb / Leistung: 45.0 kW Iedpfewbpcqjx Ag Usal • Abmessung (L x B x H): 2,120 x 1,995 x 1,720 mm • Trichteröffnung: 1,300 x 1,200 mm • Trichtervolume: 1.9 m³ • Rotor Ø / Länge: 352 / 1,320 mm • Rotor-Drehzahl: 80 – 100 U/min • Durchsatzleistung: 1 – 4 faches Trichtervolumen pro Stunde (abhängig von Material u. Sieblochung) • Anzahl der Schneidmesser: 99 (30x30mm) • Absaugstutzen: Ø 250 mm • Gewicht: 3,800 kg

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GAZ 62 with G-Rotor Factory-refurbished, new wear parts Feed opening: 620 x 820 mm Hopper capacity: 0.65 m³ Rotor diameter: 248 mm Rotor working width: 600 mm Rotor speed: 80 rpm Cutting system: Spiral rotor; 26 knives, 30 x 30 mm Screen perforation: 10 mm or as required Iodpfx Aox Eb Tmjg Ueal Control cabinet: completely wired, incl. 5 m cable Motor power: 18.5 kW Hydraulic motor: 0.75 kW Connected load: 400 V +/- 5% / 50 Hz Extraction port diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shutdown in idle mode - Vibration-damping machine feet

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW Iodjrit Nlepfx Ag Ueal - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Iedpfxsxr Tp Ho Ag Usal

Condition: like new (used), engine power 22kW shaft width 410mm driven feed rollers sieve 30mm and 15mm inlet width 430mm Iaodpfx Ajx Sycisg Uel

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, overall weight: 1,000 kg, Disc chipper with 2 knives. Tractor PTO driven. Iajdpfsx Dzdisx Ag Usl

Condition: excellent (used), Year of construction: 2019, operating hours: 3,631 h, color: green, total height: 3,400 mm, total length: 6,850 mm, total width: 2,860 mm, mobility: mobile, General Information Year of Manufacture: 2019 Applications: Forestry and Land Management Technical Information Power: 441 kW (600 HP) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Track Unladen weight: 26,700 kg Ijdew Eu Aqepfx Ag Ujal Functional CE marking: yes Condition Technical condition: very good Visual condition: very good

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Isdpfjxyqncsx Ag Uoal

Condition: excellent (used), Vecoplan 350/140 Chipper / Shredder Catalogue No. 7742 TECHNICAL DATA - Infeed width: 350 mm - Infeed height: 140 mm - Shaft width: 345 mm Ijdsxcx S Ijpfx Ag Uoal - Shaft diameter: 290 mm - Number of knives: 2 pcs - Screen size: 55x55 mm - Toothed feed shaft from above and below - Shaft motors: 2×1.5 kW - Electric auto-reverse (adjustable) - With vibrating chute - Vibrating chute length/width: 3750×355 mm - Full vibrating chute dimensions: 3750x620x1210 mm - Discharge with conveyor belt: 2970x340 mm - Conveyor belt dimensions: 3000x630x750 mm - Main motor: 22 kW - Dimensions (L/W/H): 3000x1100x1500 mm - Weight: approx. 2500 kg ADVANTAGES – German-made – with vibrating chute – With discharge conveyor – Auto-reverse – Used chipper, in very good condition Net price: 47,900 PLN Net price: 11,400 EUR depending on the exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2006, Bruks drum chipper Model 820CM Year of manufacture: 2006 Iaodpoxr Trnefx Ag Uol

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Iajdpfov Sqrpsx Ag Uel Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), Catalogue number: 7741 TECHNICAL DATA Inlet width: 400 mm Inlet height: 210 mm Shaft width: 430 mm Shaft diameter: 390 mm Knife length: 430 mm Number of knives: 2 pcs Screen size: 38x24 mm / 27x27 mm Bottom toothed feed roller Lower roller motor: 0.75 kW Upper toothed feed roller Upper roller motor: 0.75 kW Belt feeder Feeder belt length: 1950 mm Feeder belt width: 400 mm Discharge conveyor with adjustable height: 3 kW Conveyor dimensions: 6100x550 mm Total discharge conveyor dimensions: 6550x1850 mm Iaedpfxexcx R De Ag Uol Main motor: 30 kW Auto-reverse (adjustable) Overall dimensions (L/W/H): 3750x1720x1750 mm Weight approx.: 3500 kg – German made – Auto-reverse – Belt feeder – Discharge conveyor with adjustable height (mobile) – Used shredder, in very good condition Net price: 86,900 PLN Net price: 20,690 EUR at an exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters Iedpfod Hkqhjx Ag Usal hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom Isdpfx Asv Ublfog Ujal – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Ijdpfx Agod Dgw Us Uoal Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: excellent (used), CATALOGUE NO. 7794 TECHNICAL DATA - inlet width: 530mm - inlet height: 200mm - shaft diameter: 370mm - shaft width: 510mm Ijdpfxsxqmrrj Ag Ueal - knife length: 510mm - number of knives: 2 pcs - auto-reverse – adjustable - screen dimensions: 50x50mm - lower toothed feed roller: 1.5kW - upper toothed feed roller: 1.5kW - main motor power: 30kW - vibrating infeed table / vibrating length: 3900mm - vibrating width: 500mm 1.5kW - discharge conveyor length: 5000mm - belt width: 380mm - waste chute hopper: 2500x3020x2200mm - platform: 4650x750x1770mm - machine dimensions with conveyor and vibrating table (L/W/H): 8900x1200x2550mm - weight: approx. 6000kg ADVANTAGES – adjustable auto-reverse – includes 3900mm vibrating table – includes 5000mm conveyor – German-made – very good condition – used industrial wood chipper Net price: 98,900 PLN Net price: 23,550 EUR (according to 4.2 EUR exchange rate) (Prices subject to change with significant fluctuations)

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer Iaedpfx Aewrpv Ejg Ujl - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES Iaedpfx Ajignt Uog Uel – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Catalogue No.: 7536 – German-made Iajdpfx Asvu A Rpog Uol – No engine – Used chipper TECHNICAL DATA Feed opening width: 530 mm Number of knives: 2 pcs Shaft diameter: 580 mm Feed opening width: 420 mm Feed opening height: 200 mm Net price: 30,000 PLN Net price: 7,140 EUR (at 4.2 EUR rate) (Prices may change with significant fluctuations)