Used Haas Sl 10 for sale (210)

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. Ledpfxjyanlae Amroac The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, Haas VF5/40XT milling machine from late 2010. The machine is connected and operational—ready for work, following the replacement of the X-axis ballscrew. Plexiglass door guards and side covers have been replaced with new ones. Calibration was performed using a Renishaw Ballbar; with further leveling and configuration, even higher precision can be achieved. The machine can be inspected, tested, etc. Purchase including transport, installation, training, leveling, and configuration is possible for an additional fee. Loading for transport is included in the machine price. Spindle taper: ISO40 Tool magazine: 40 tools Laedpfxsy D Enhs Amrsc Through-spindle coolant Rigid tapping Macros Auger chip conveyor Spindle orientation X 1524 mm, Y 660 mm, Z 635 mm—the X-axis is extended in the XT series.

Condition: ready for operation (used), Hand-lever Surface Grinding Machine - HAAS UHS FL - Grinding length: 350 mm - Grinding width: approx. 180 mm - Grinding height: 250 mm - Grinding movement via hand lever Lsdpfx Ajyk Dq Tsmrsac - Swiveling range (horizontal): 360 degrees - Tilting range (vertical): +- 15-20 degrees - General angle adjustment - Spindle speed: 2500 / 5600 rpm - Drive power: 1.1 kW Dimensions: LxWxH 1.2x1x1.7 meters / Weight 700 kg Subject to errors and input mistakes

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 8100 [rpm] - Gearbox - Speed ranges : 2 - Number of spindle hours : 4000 [h] LINEAR AXES - Travels on X/Y/Z axes : 1270/508/635 [mm] - Rapid traverses rates (X/Y/Z) : 35.6/35.6/35.6 [m/min] - Cutting feed rates (X/Y/Z) : 21 [m/min] - Distance table / spindle nose (min./max.) : 742 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 1321/495 [mm] - Maximum weight upon table : 794 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 30 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870/2510 [mm] - Machine height : 2690 [mm] - Machine weight : 6260 [kg] MACHINE HOURS - Number of hours under power : 16247 [h] Lajdpfjyn R Igox Amrec - Number of working hours : 6025 [h] EQUIPMENT - CNC : HAAS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Rigid tapping - Prepared for a 4th-5th axis divider - Coolant tank : 208 [l] - Chips conveyor - Tool probe - Electric transformer

Condition: used, Year of construction: 2010, functionality: limited functionality, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: MOCON 17.28, table width: 1,626 mm, table length: 710 mm, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, Vertical 3-axis machining center Haas VF6 / 50 HE Linear guideway machine with up to 610 Nm torque (at 500 rpm) Travel paths: X 1626 mm Y 813 mm Z 762 mm Linear position measurement system 2-speed gear spindle SK50 with 7,500 RPM and 22.4 kW Automatic tool changer with 30 +1 positions Internal coolant supply with 1000 psi (approx. 70 bar) Coolant tank 360 liters Spiral chip conveyor Includes: Oil mist extraction unit Ethernet interface Laodpfx Amjw Rbx Ujroc RENISHAW wireless tool measurement system Additional loading fixture for inserting tools into the machine Macro programming enabled. The machine is only partially functional.

Condition: used, Year of construction: 2022, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 203 mm, travel distance Z-axis: 1,219 mm, overall weight: 2,087 kg, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this used HAAS TL-2 horizontal machining center, year of manufacture 2022. Serial number: 3124664 Manufacture date: 06/2022 Voltage: 400 V Phases: 3 Lodpfx Aex Tgx Homrjac Frequency: 50/60 Hz Rated current: 13 A Maximum current: 10 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Lasdju T Rgqspfx Amrsc

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 1084327, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, The following automation systems are also being auctioned from the same location: Lajdpfx Ameyfuq Terec System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Spindle speed: 10,000 rpm Number of tool positions: 40 Tool holder: BT 40 MACHINE DETAILS Control: Haas Spindle hours: approx. 4,500 h EQUIPMENT Chip conveyor Hardened clamping plate, 20-M10 Tool measurement / tool breakage monitoring Digital 3D touch probe Renishaw Automation interface Automatic side door Oil mist extraction Internal coolant supply

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Ledpsx Enh Tofx Amroac Y-Axis Movement 508 mm This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Sale only within Germany Control System: Siemens Sinumerik Software: Haas Software 7.3 Number of Axes: 6 (X, X3, Y, Z, C, A) Grinding Spindle: - Continuously variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece Spindle: - Up to 1,000 rpm - Centre height 175 mm - Clamping collet 3409 - Taper mount SK50 - Through bore Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 arcseconds - Input increment 0.001° Workpiece Support: Linear axis X3 with bushing holder Feed Drives: - Linear axes with ball screw spindles - Direct length measurement with 0.0001 mm resolution Workpiece Dimensions (Drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Max. workpiece weight 2.5 kg Chain Magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Max. workpiece weight 1.5 kg Stack Magazine: - Preparation for stack magazine for indexable inserts Measuring System CCD Area Camera: - Indexing and positioning of tools by coolant channel (from Ø0.8 mm) - Measurement of opening angle - Indexing of multi-groove drilling and reaming tools Renishaw Probe: - Touch-off for workpiece length/tool tip - Scanning of groove pitch - Positioning in coolant channel bore at tool tip Electrical Connection: - 63A main fuse - Mains voltage 400V - Frequency 50 Hz - Control voltage 24V - Rated power 21 kW Weight: 8 t Including: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft und Bauer extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Pressure plate Ljdpfx Aowpqkrsmreac ----- Operating Procedure – For Drills: - Manual loading of chain magazine outside machine enclosure - Automated workpiece handling system - Automatic collet chuck clamping - Workpiece positioning in the working area - Workpiece machining - Automatic return of workpieces onto powered conveyor belt Operating Procedure – For Solid Carbide Indexable Inserts: - Manual loading of stack magazine inside working area - Automated workpiece handling system - Automatic clamping with special clamping fixture - Workpiece positioning in the working area - Workpiece machining - Automatic return of processed workpieces onto storage system Drill Grinding: - Grinding of flute profile - Grinding of cutting edge - Grinding of circumference profile - Grinding of relief chamfer - Grinding of periphery chamfer - Cylindrical grinding Indexable Insert Grinding: - Grinding of support face and pin ----- Two additional identical machines are also available for sale!

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: 1106086, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 356 mm, table length: 914 mm, The machine's tool changer is defective. The repair costs for this are approximately €8,000 - €10,000. The axis wear corresponds to the typical wear for a machine of this year of manufacture. TECHNICAL DETAILS Travel Paths X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Length: 914 mm Width: 356 mm Max. table load: 680 kg Spindle Spindle taper: SK-40 Spindle drive: 22.4 kW Speed: 12,000 rpm Tool Changer Tool changer: 24+1 magazine positions Feed Rates Rapid traverse: 35.6 m/min MACHINE DETAILS Lsdpjw Axkyjfx Amroac Electrical Data Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum load: 70 A Short-circuit interrupting capacity: 10,000 A Short-circuit current: 5,000 A RMS symmetric Operating Dimensions Max. operating height: 2,667 mm Max. operating width: 3,175 mm Max. operating depth: 2,769 mm EQUIPMENT Key switch for program lock Synchronized thread tapping 208-liter coolant system with continuous coolant supply 15" color LCD monitor with USB port

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2808, total height: 2,400 mm, total length: 3,300 mm, total width: 2,200 mm, feed length X-axis: 450 mm, feed length Y-axis: 250 mm, feed length Z-axis: 350 mm, overall weight: 7,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, CNC grinding center for external, internal, and profile grinding with three linear axes and a swiveling grinding head. Modularly configurable for various grinding tasks, featuring automated dressing cycles, modern control system, tool management, and options for measurement systems as well as peripherals such as coolant treatment and extraction. Lodpfsxuichsx Amrjac

Condition: excellent (used), Year of construction: 2020, operating hours: 7,320 h, machine/vehicle number: 3119208, turning length: 406 mm, turning diameter: 305 mm, spindle motor power: 14,900 W, spindle speed (max.): 4,000 rpm, spindle bore: 64 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, For sale: Used CNC lathe HAAS ST15 in very good technical condition. Operating hours: 7,320. Reason for sale: Standardization of machinery for compatibility with the rest of the machine park. Key features: • Automatic Door • Renishaw WIPS Probing System Lasdpfoy A I Nxsx Amrsc • Hybrid BOT/BMT Turret (Dual Mount Tooling) • Live Tooling (Driven Tools – milling option) • Sub-Spindle (6,000 RPM) • Parts Catcher (if installed) • Chip Conveyor • Control Cabinet Cooler • Wireless Networking (WiFi) • Rigid Tapping • Extended Program Memory (1GB) • VPS Programming (Visual Programming System) For more information, please contact us by phone or email.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,739 h, machine/vehicle number: 3113763, turning length: 406 mm, turning diameter: 305 mm, spindle motor power: 14,900 W, spindle speed (min.): 4,000 rpm, spindle bore: 64 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, mount diameter: 210 mm, For sale: Used HAAS ST15 CNC lathe in very good technical condition. Operating hours only 2,739. Reason for sale: standardization of machines for compatibility with the rest of the facility. Key options: - Renishaw WIPS Probing System → Renishaw measuring probe (WIPS) - 8” Hydraulic Chuck - 12-Station BOT Turret - Parts Catcher - Chip Conveyor - Rigid Tapping - Extended Program Memory (1GB) Lajdjy A Iw Nopfx Amroc - VPS Programming (Visual Programming System) - Custom Macros (trial active) For more information, please contact us by phone or email.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,838 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 7,500 rpm, Submitting a bid obligates you to collect the item on time by 30.01.2026! TECHNICAL DETAILS Travel X-axis: 1,270 mm Travel Y-axis: 508 mm Travel Z-axis: 635 mm Spindle speed: 7,500 rpm Table size: 1,320 mm x 455 mm T-slots: 14 mm MACHINE DETAILS Operating hours: 23,838 h Tool changes: 300,000 EQUIPMENT SK 40 taper with 40-position automatic tool changer Note: The two vices are not included in the scope of sale and delivery. Lsdpjx Nvv Hjfx Amrjac

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 711 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, spindle speed (max.): 15,000 rpm, spindle nose: BT 30, number of slots in tool magazine: 20, These are two identical Haas DT-2 machining centers equipped with automation. · Yaskawa GP-series industrial robot · Tray transport via robot · Parts handling for both items using a combination robot gripper · Machining: one workpiece per machine Equipment: Through-spindle coolant (IKZ) Wireless probing system Laedpfxoyg Dfie Amrsc Chip conveyor Including automation

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2052582, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: Haas, table width: 914 mm, table length: 1,626 mm, table load: 4,536 kg, rotary table diameter: 760 mm, rotational speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Condition: very good (used) 4-axis horizontal machining center Brand: Haas Equipment: Tool holder SK50 Tool positions: 30+1 Year of manufacture: 03/2008 Weight: 13,600 kg Laedpfx Amew Uz Ansrec Additional information: Machine has been newly painted Price on request

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Lasdoxtbtiopfx Amrec Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle Speed 7500 RPM Spindle motor power 22.4 kW Movement X-Axis Movement 2134 mm Z-Axis Movement 762 mm Y-Axis Movement 813 mm Ledox Imrpspfx Amroac This 3-axis HAAS VF 7/50 was manufactured in 2017, featuring extensive axis travels with X-Axis at 2,134 mm, Y-Axis at 813 mm, and Z-Axis at 762 mm. It supports a maximum workpiece weight of 1,814 kg and includes a spindle speed up to 7,500 rpm. Ideal for robust machining tasks, consider the opportunity to buy this HAAS VF 7/50 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). Lsdpfx Amjywgaxerjac The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: repair required (used), Year of construction: 2001, Mikron HAAS VCE1250 CNC vertical machining center Year: 2001 In need of repair as not under power since 2023. Lasdpfx Asyq Nlvsmrjc The machine is in good optical condition but its technical condition is unknown. It needs repair. Technical specifications: Axis X 1250 mm Axis Y 500 mm Axis Z 635 mm Type of CNC Haas Table length 1300 mm Table width 450 mm Max. workpiece weight 800 kg Number of tool pockets 20 Spindle taper SK 40 Max. spindle speed 7500 rpm Spindle motor power 11 kW Weight 6100 kg Accessories/options: prepared for 4.axis ( drive and wiring included ) through spindle coolant swarf spiral Renishaw TS27 coolant tank cabinet with accessories

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Laedpfx Amsx Up Dheroc Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, The machine is in very good technical condition; testing is possible by prior arrangement. Laedpfsyr Spysx Amrjc

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm Lajdpfx Asxva Ahsmrjc B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: good (used), Year of construction: 2011, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Lajdpfx Ajyq Ipgomrjc