Used Haas Sl 10 for sale (248)

Condition: excellent (used), Year of construction: 2014, Haas Minimill 2 Year of manufacture: 2014 Spindle speed: 10,000 rpm Hedpfxoyg D Uwj Afnonh 24-position tool changer USB Very good running condition Video available

Condition: excellent (used), Year of construction: 2012, Haas ST 30 Year of manufacture: 2012 Hnodpfjyaatcex Afnoh Tailstock Part catcher Tooling

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Movement Y-axis 406 mm Hnedpsydn E Ijfx Afnjh Movement Z-axis 508 mm Spindle taper DIN 68971A Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. • Chuck size: 10 in (≈254 mm) • Maximum bar capacity (through spindle): 3 in (≈76 mm) • Maximum part swing over front apron: 31.75 in (≈806 mm) • Maximum cutting diameter: 13.75 in (≈349 mm) using BMT65 turret • Maximum cutting length: 32.5 in (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 in (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm Hodsx D Iixspfx Afnenh • Y-axis capability: off-centre milling, drilling, and tapping • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195–260 V (region dependent) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment • Powered (live) tool holders • Various tool holders • Liners

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1148877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Hnjdpsx Afpgofx Afnoh Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control High flow coolant system Lighting Enclosed guarding Manual

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Hnodpfx Ajykay Defnsh Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: used, Year of construction: 2010, functionality: fully functional, HAAS VF6 5 AXIS WHEEL MACHINE CNC MACHINE £45K PLUS VAT This machine is set up for the five axis machining of automotive wheels. Extra Z height machine to allow full use of 5 axis 2010 machine. 10k spindle side mount tool changer High speed machining enabled Hsdpfex U Earjx Afnenh Networking enabled. we can set up the machine if required.

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 5,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, total height: 1,956 mm, total width: 2,921 mm, overall weight: 4,000 kg, product length (max.): 4,191 mm, number of axes: 2, This horizontal turning machine was manufactured in 2017. The HAAS ST-20SS features a maximum turning diameter of 330 mm and a turning length of 572 mm. It includes a hybrid VDI/BOT tool turret with 24 positions and a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-20SS machine we have for sale. Contact us for further details. • Machining capacity: • Maximum turning diameter: 330 mm • Maximum turning length: 572 mm • Spindle bar capacity: 51 mm • Axes: • Rapid feed X-axis: 24 m/min • Rapid feed Z-axis: 24 m/min • Spindle: • Spindle nose: ASA 6 • Chuck size: 210 mm Hnjdpfx Afsyifcronsh • Tooling: • Tool turret: Hybrid VDI/BOT – 24 positions • General: • Coolant tank capacity: 208 L

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. Hnodpfx Aoyid Hvjfnsh • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h • Price: €73,000 Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2016, operating hours: 2,153 h, functionality: fully functional, machine/vehicle number: 1125367, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 SS 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, High speed rotary's C Axis 360deg Rotation, B Axis -35deg to + 100deg, High speed machining enabled Hnedex Uznfopfx Afnsh Spindle Speed 15,000rpm, 40 Tool ATC , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1125367 (2015). Wireless probing.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, HAAS EC 400 HORIZONTAL MACHINING CENTER 4 AXIS OMEGA DESIGN SOLUTIONS UK Use 15 Haas machines to manufacture high precision components for the Aerospace and race car markets. We use Haas machines from VF1 to the mighty UMC750SS. We have used Haas machines for 15 year and feel they are the best in the market. This EC400, twin pallet horizontal machine The tooling is bt40 , there are tools included in the sale. Hnodpfx Afsx Urc Tsneh We can demonstrate the machine or set it up to make your parts if required. 2008 machine ready for work Terms and conditions apply

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4s HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features a C+Y-axis, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. With additional features like an automatic tool presetter, bent-type chip conveyor, and a programmable tailstock, consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor Hsdpfxoyh Hw Io Afnsnh • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: good (used), Haas Laser HL 1203D Hsdpfjxam Ryjx Afnsnh Optical configuration: 22-31-21-BX Laser class 4 1500 W 1064 nm Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. Hsdpfxexrf Sts Afnonh As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): Hjdpeyhfltefx Afnsnh • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,588 kg, overall weight: 6,623 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3s HAAS VF-5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details. • Table size: 1321 x 584 mm • Drive system: Inline direct-drive • Tool changer capacity: 20/24+1 stations • Rapid traverse (X/Y/Z): 18 m/min • Max cutting feed: 12.7 m/min Hnodpjyhcktefx Afnsh Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2017, x-travel 1016 mm Hsdpfx Afjyhrbnjnsnh y-travel 660 mm z-travel 635 mm

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table load: 794 kg, spindle speed (max.): 2,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 4-axis HAAS VF-4SS vertical machining center was manufactured in 2019. It features a 1270 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. With a maximum spindle speed of 12,000 rpm and spindle power of 22.4 kW, it ensures robust performance. Maximum table load capacity is 794 kg. If you are looking to get high-quality milling capabilities consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Hnjdpfxsx D H Nde Afnjh • Spindle nose to table distance: 107–742 mm (min–max) • Spindle taper: CT 40 • Maximum spindle torque: 122 Nm @ 2,000 rpm • Table size (L x W): 1321 x 495 mm • T-slots: 5 slots, 16 mm width, 80 mm spacing • Maximum feed rate (X/Y/Z): 35.6 m/min

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,717 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 2,565 mm, table load: 300 kg, overall weight: 8,200 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2020, featuring a 762 mm X-axis, 508 mm Y-axis, and 508 mm Z-axis. It includes a spindle speed up to 12,000 rpm, ISO 40 taper, and a robust 40-position tool changer. The machine supports a maximum table load of 300 kg and offers advanced features like a wireless probing system, chip conveyor, and through-spindle coolant. Consider the opportunity to buy this HAAS UMC-750 universal machining centre. Contact us for more information. Additional equipment • Wireless Intuitive Probing System • Through-Spindle Coolant Machine Benefits Technical Machine Benefits • B-axis travel: 120° to -35° • C-axis travel: 360° • Spindle nose to table (max/min): 610/102 mm • Table diameter: 500 mm • Tool changer capacity: 40 positions Extra Information Hnedpfxox Hbmro Afnjh Machine still under power Dimensions Machine Depth 3978 mm

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 2,667 mm, table load: 1,361 kg, overall weight: 3,300 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, This 3-axis HAAS VF-1 vertical machining centre was manufactured in 2013. It features a HAAS control, a spindle power of 22.4 kW, and a spindle speed of 8100 RPM. The machine includes a carousel-type tool magazine with 20 positions and a coolant capacity of 208 liters. If you are looking to get high-quality milling capabilities, consider the HAAS VF-1 machine we have for sale. Contact us for more information. • Table: Length 660 mm; Width 356 mm Hnodpfx Afjygld Honeh • Tool magazine: Carousel, 20 positions • Coolant capacity: 208 l Dimensions Machine Depth 2489 mm

Condition: used, Haas TM2, Travels, X-1016mm, Y-406, Z-406mm Specifications: X: 40" Y: 16" Z: 16" Power: 7.5 hp RPM: 4,000 RPM # ATC: 10 Taper: CAT-40 Hsdpfx Aox Rcbrsfnenh Table-W: 10.5" Table-L: 57.75"

Condition: good (used), Year of construction: 2007, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Machine: Haas VF-2SS with HRT160 Year of manufacture: 2007 Condition: Used, inspected, fully functional Technical specifications: Spindle: max. 12,000 rpm, 22.4 kW power, standard SK40 taper Travel: X: 762 mm Y: 406 mm Z: 508 mm Table: 914 x 406 mm, T-slots Rotary table: HRT160, 4th axis, integrated for simultaneous machining Tool changer: 24 stations CNC control: Haas Classic Control Coolant system included Special features: HRT160 enables 4-axis machining for complex workpieces Machine can be inspected under power by appointment in Burbach. We provide loading assistance. Buyer is responsible for transport. Technical data, accessories and description of the machine are non-binding. Hsdpfsyg Iixjx Afnjnh

Condition: used, Year of construction: 2018, x-travel 762 mm y-travel 508 mm z-travel 508 mm Hnjdpfxeygm Tpe Afneh control Haas

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Hnsdpfx Aox D Dzwofnjh Milling

Condition: used, Year of construction: 2011, operating hours: 16,000 h, machine/vehicle number: 1090229, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 524 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, workpiece weight (max.): 1,550 kg, table load: 1,550 kg, rotary table diameter: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, tool diameter: 127 mm, input voltage: 400 V, type of input current: AC, Machine: Haas VF 3 Serial No.: 1090229 Year of manufacture: 2011 Operating hours approx.: 16,000 h Travel X/Y/Z: 1016 mm / 508 mm / 524 mm Spindle speed: 10,000 rpm, belt-driven spindle Table size approx.: X 1219 mm & Y 457 mm Table load: 1,550 kg Tool stations: 20, ISO / CAT 40 Rapid traverse X/Y/Z: 25 m/min Machine dimensions (LxWxH): approx. 4,000 mm / 2,800 mm / 2,600 mm Machine weight: approx. 5,600 kg. Special options: Hinged belt chip conveyor incl. 4 cross conveyors Handwheel HRT 310 P3 / SN318596 Renishaw TS27 R + OMP 40 Software options: Sync tapping M19 Rotating and scaling Macro Through-spindle coolant (IKZ) 20 bar 4th axis for HRT 310 Software version 18.28A Repairs in January / February 2026: Spindle has been re-bedded, taper ground and balanced Tool carousel replaced LED interior lights replaced Spindle belt replaced Machine location: Solingen, North Rhine-Westphalia (NRW) Hnodpfx Ajyhmcyefnoh