Work center

HAAS VF - 5

Condition: used, Year of construction: 2006, Vertical machining centre, Haas VF-5B/40HE, year 2006. Gbjdpfx Anoy Ia Ikerjl

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Godpfx Asviqybonrebl Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: good (used), Year of construction: 2007, Traverses X Y Z: 1270 x 660 x 635mm, Table 1321 x 584mm, Spindle Speed 0 – 7500rpm, Spindle taper BT 40, Spindle Motor 20Hp, HAAS Control, 20 Station tool change, coolant Gbodpsy Eyauefx Anrol

Condition: ready for operation (used), Year of construction: 2010, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, Haas VF5/40XT milling machine from late 2010. The machine is connected and operational—ready for work, following the replacement of the X-axis ballscrew. Plexiglass door guards and side covers have been replaced with new ones. Calibration was performed using a Renishaw Ballbar; with further leveling and configuration, even higher precision can be achieved. The machine can be inspected, tested, etc. Purchase including transport, installation, training, leveling, and configuration is possible for an additional fee. Loading for transport is included in the machine price. Spindle taper: ISO40 Tool magazine: 40 tools Through-spindle coolant Rigid tapping Macros Auger chip conveyor Gbedpfoy D Enhjx Anrjl Spindle orientation X 1524 mm, Y 660 mm, Z 635 mm—the X-axis is extended in the XT series.

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Gbodpjuhf Tzsfx Anrol Working width max. 4300mm throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min Gedpex E Dn Njfx Anrjbl rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V weight of the machine ca. 13,2 t dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,588 kg, overall weight: 6,623 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3s HAAS VF-5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details. • Table size: 1321 x 584 mm • Drive system: Inline direct-drive Gbedpfxjyhckts Anrsl • Tool changer capacity: 20/24+1 stations • Rapid traverse (X/Y/Z): 18 m/min • Max cutting feed: 12.7 m/min Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. • Country of origin: USA • Certification: CE • Electrical: 440 V, 3 phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short circuit capacity: 10,000 A • Software version: 100.19.000.1123 Gbodeywv Tnspfx Anrsl • Power on time: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, wash gun, LED work light, fully enclosed working area • Condition: very good condition, low operating hours, well maintained Additional equipment • Machine vise • Touch probe Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5SS was manufactured in 2016. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and a 24-position tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5SS vertical machining centre we have for sale. Contact us for further details. • T-slots: 7 • Max spindle torque: 122 Nm @ 2000 rpm • Rapid feed: 30 m/min • Tool magazine: 24 positions Gbjdpfx Anoypb A Dersl Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger Gjdpfxex Sq Sbo Anrobl High speed machining Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Gedpfowm Rqaex Anrobl Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Gbodpfx Ansyf E D Rersl Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: used, Year of construction: 2014, Traverses X Y Z 1524 x 660 x 635mm, Gbedpfoydvhksx Anrel Table size 1575 x 584 mm, Spindle speed 7,500rpm, Spindle taper CAT40, Motor 30HP, Haas control, 20 station ATC

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 12 [mm] - Max. machining length : 135 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 0.001 [°] Gbsdpfx Anjuhaw Ierjl COUNTER-SPINDLE - Max. bar diameter : 12 [mm] - Z stroke : 120 [mm] - Spindle speeds : 7000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 5 END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500 X 770 [mm] - Machine weight : 1400 [kg] EQUIPMENT - CNC : Fanuc - 3 colors status lamp - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Electric transformer

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Gbsdpfjykqtzjx Anrjl Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual