Used Haas Mini Mill for sale (224)

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Dwodpfx Ajzwxz Ejcyod Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots Dwsdpfx Acoydil Njyed 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Dwedpfx Ajyu Nb Eocysd Weight: 240kg

Condition: good (used), Year of construction: 2011, Haas VF-3YT/50 vertical machining center, manufactured in 2011. Dodpfxs Ahxqye Acyewd

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) Dwedpfxoz R Rf Aj Acyod RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, total height: 2,000 mm, controller manufacturer: HAAS, number of axes: 2, This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Turning diameter over bed: 762 mm • Tool turret vdi: 12 tool positions • Turning length: 860 mm Dwsdpfxjyar Tho Acyod Extra Information Machine still under power Dimensions Machine Depth 3300 mm

Condition: excellent (used), Year of construction: 2017, Haas ST 15 Year of manufacture: 2017 RPM: 3500 Tool setter Tailstock Chip conveyor Video available! Dedpfx Aez I Rylscyswd

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Tool Set Carousel (TSC) Workpiece Probe System (WPS) Renishaw probing system 4th axis, wired Dodpfxsz Ihc Rj Acyswd Video available!

Condition: excellent (used), Year of construction: 2010, Excellent condition can be demonstrated if required we also have a video of it running Dwedsq Rcilspfx Acyod we have also got a tailstock if required

Condition: excellent (used), HAAS TR310 TRUNNION TABLE EXELENT CONDITION TESTED CAN BE SHOWN WORKING Dwodpfonp Iyhsx Acysd

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1160235, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg   MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping Filtermist extraction system Dwodszz Ndrjpfx Acyed Programmable coolant nozzle Lighting Guarding

Year of construction: 2019, condition: excellent (used), travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, bar passage: 76 mm, spindle speed (max.): 3,400 rpm, CNC lathe Manufacturer: Haas Model: ST-30Y Year of manufacture: 2019 Control: Haas Technical Data: Max. swing diameter: 533 mm Max. machining diameter (with BMT 65): 349 mm Distance between centers: 826 mm Bar capacity: max. 76 mm Travel distances: X-axis travel: 239 mm Y-axis travel: +/- 51 mm Z-axis travel: 826 mm Main spindle: Spindle speed: 3,400 rpm Drive power: 22.4 kW Turret: Number of tool stations: 12 positions Tool holder: BMT 65 Rapid traverse rates: Rapid traverse (x, y, z): 12 / 12 / 24 m/min Dwedpfx Aj Agrmuocyod Technical features & accessories: - Driven tools (C-axis) - Automatic tool presetting arm - Coolant tank - Coolant pump - Chip conveyor - 254 mm chuck - Tailstock Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,950 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: HAAS, controller model: CNC Control, workpiece weight (max.): 680 kg, total height: 2,570 mm, total length: 2,570 mm, total width: 2,510 mm, table width: 356 mm, table length: 914 mm, table load: 680 kg, overall weight: 3,600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,950 h, spindle nose: CAT 40 / BT40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The Haas VF-2SS is a compact, high-speed 3-axis vertical CNC machining center. The “SS” stands for Super-Speed. This machine is installed and operational at our location and can be inspected while running! Dwjdpfoz Nhphox Acyod This HAAS VF-2 SS is equipped with: - SS (Super Speed) version. - 24-tool magazine. - Internal cooling (IKZ). - Chip conveyor. - Renishaw OTS tool probe. - Renishaw OMP40-2 3D probe. - Programmable coolant nozzle. - Air blow gun. - Coolant tank. - Original documentation.

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, 500mm x 500mm table, max table weight 300kg, table tilt +110°, -35°, 22.4kW, 15000rpm, Djdpfxjz Sqqme Acyewd BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant,

Condition: used, Year of construction: 2006, type of input current: three-phase, Equipment: chip conveyor, We offer a used Haas VF-2BHE vertical machining center, manufactured in 2006. Dwedpj Agcv Sofx Acyed Manufacturer: Haas Model: VF-2BHE Machine type: Vertical machining center Serial number: 49679 Date of manufacture: 06/06 Voltage: 360–480 V Phases: 3 Frequency: 50/60 Hz Full-load current: 20 A Largest load: 35 A Short-circuit interrupting capacity: 10000 A Wiring diagram: 96 / 8100 Enclosure rating: NEMA Type 1 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2019, This 4-axis HAAS ST-15Y was manufactured in 2019 and features Y and C axes with driven tools, D210 hydraulic chuck, 65 mm spindle bore, hydraulic programmable tailstock, 12-station VDI-40 turret, and chip conveyor. If you are looking to get high quality turning capabilities consider the HAAS ST-15Y machine we have for sale. Reach out for more information. Dsdpfezvbppjx Acyewd Additional equipment • Driven tools Machine Benefits Technical Machine Benefits • D210 hydraulic chuck. • D65mm main spindle bore. • Hydraulic programmable tailstock. • 12 pcs turret head. Vdi-40 • X, Z, Y, C-axis. • C-axis with hydraulic brake.

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. • Tool changer: 40+1 tools (CT as provided) • Through‑spindle coolant (TSC) 21 bar • Air through spindle Djdpfxsx Imtts Acyewd • High‑Speed Machining • Programmable coolant nozzle (P‑Cool) • DWO/TCPC • Auto Door • Side window • Top roof/enclosed top Additional equipment • Chip conveyor • Renishaw probes (probing system) • Robot interface

Condition: excellent (used), Year of construction: 2017, HAAS VF-3SS vertical machining center Year: 2017 Technical details: X-axis travel 1016 mm, Y-axis travel 508 mm, Z-axis travel 635 mm, Table size of 1219 x 457 mm, Spindle 12000 rpm ATC 24 positions Spindle type SK40 Accessories/options: Renishaw touch probe Renishaw TS27 tool measuring Swarf conveyor Through spindle coolant Software options Dwsdpfx Acj Af Ncweyed Under power ihnspection is available at anytime!

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, total height: 2,290 mm, total length: 5,760 mm, total width: 4,440 mm, overall weight: 5,760 kg, HAAS ST-35 CNC LATHE – ONLY 50 HOURS – LIKE NEW – FULLY EQUIPPED HAAS ST-35 CNC Turning Center in outstanding condition with only 50 operating hours. The machine was purchased for a specific production project and has seen very limited use. It is in excellent mechanical and cosmetic condition and is ready for immediate production. Main Features Programmable Tailstock Chip Conveyor High Pressure Coolant Automatic Tool Presetter (ATP) Haas Next Generation Control (NGC) Ethernet & USB Connectivity Touch Screen Control Work Light Dwodozrhinspfx Acyjd Complete documentation The machine has always been operated in a clean industrial environment and maintained according to Haas recommendations. The machine can be inspected under power in Portugal. Additional photos, videos and technical information are available upon request. Price: €60,000 + VAT

Condition: used, Year of construction: 2015, functionality: fully functional, Počet os: 3 Pojezd osy X: 1270 mm Pojezd osy Y: 508 mm Pojezd osy Z: 635 mm Djdpfe Ad Iabjx Acyowd Technická specifikace Výkon vřetena: 22.4 kW Rychlost vřetena: 12000 RPM

Condition: good (used), Year of construction: 2015, operating hours: 2,727 h, functionality: fully functional, YEAR 2015 Production hours 2727 h MANUFACTURER HAAS AUTOMATION INC MODEL VF 5/40 Dsds Adql Tspfx Acyswd CNC HAAS Technical features : X-axis 1270 mm Y-axis 660 mm Z-axis 635 mm X-axis rapid traverse 18.0 m/min Y-axis rapid traverse 18.0 m/min Z-axis rapid traverse 18.0 m/min Spindle tip-to-table travel (~max.) 742 mm Spindle tip-to-table travel (~min.) 107 mm 24-position tool changer Spindle speed 10.000 rpm Maximum spindle power 22.4 kW Maximum spindle torque 122.0 Nm 2000 rpm Spindle taper CT40 | BT40 | HSK-A63 Table width 584 mm Table length 1321 mm Maximum table load 1815 kg Table T-slot width 14 mm Table center distance 80 mm Machine supplied with manuals and CE declaration of conformity

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1112519, MACHINE SPECIFICATION Table size 914mm x 356mm Dwodo Ahw Rzspfx Acyod X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102 -610mm Spindle BT 40 Spindle speeds 0-12000rpm Spindle motor 22.44kW Rapid feed rate 35.6m/min Toolchanger capacity 24 + 1 tools Approximate weight 3800Kg MACHINE EQUIPPED WITH: - Haas CNC control Wireless intuitive probing system Swarf auger Coolant system Lighting Guarding

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231715, For sale is a CNC vertical machining center from the renowned American manufacturer HAAS Automation, model VF-2SS, manufactured in 2010. Manufacturer: HAAS Automation Model: VF-2SS Super Speed Machine type: CNC vertical machining center Year of manufacture: 2010 Control: HAAS CNC control Number of axes: 3, 4th axis, and 5th axis via HAAS rotary table Machine condition: very good Operating hours: approx. 10,900 Technical data Working area / Travel distances X-axis: 762 mm Y-axis: 406 mm Z-axis: 508 mm Main spindle Maximum spindle speed: 12,000 rpm Dwodps Ah Rucofx Acyed Maximum spindle power: approx. 22.4 kW / 30 HP Spindle drive: Inline direct drive Tool holder: SK40 Work table Table dimensions: 914 × 356 mm Maximum table load: approx. 680 kg Number of T-slots: 3 T-slot width: approx. 16 mm T-slot spacing: 125 mm Feed and rapid traverse rates Rapid traverse, X-axis: up to 35.6 m/min Rapid traverse, Y-axis: up to 35.6 m/min Rapid traverse, Z-axis: up to 35.6 m/min Tool changer Automatic, side-mounted tool changer Tool magazine: 24 tool positions Tool holder: 40 taper Coolant system Integrated coolant system 4th/5th axis via HAAS rotary table (see pictures) Measuring probe system Programmable coolant nozzle Machine weight: 3,600 kg The machine can be inspected in operation by appointment. Subject to changes, errors and prior sale!

Condition: used, Year of construction: 2010, functionality: fully functional, grinding spindle speed: 8,000 rpm, grinding spindle motor power: 12 W, Machine in functional condition and can be under power and tested. Dodpfx Aoz Ea Hpscyewd

Condition: good (used), Year of construction: 2012, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 1097151, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: Haas CNC Control, total height: 6,350 mm, spindle speed (max.): 12,000 rpm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HAAS VM-3 – 2012 We are selling this machine due to purchasing newer, more expensive equipment and limited shop space. The machine is in good working condition and currently under power / in use. All standard specifications and dimensions are available online. If you have specific questions, feel free to contact us. The machine is equipped with the option to connect a 4th or 5th axis rotary table. Please note that rotary units are not included in the sale, but the machine is prepared for future expansion. Dwedpfsym N Ehex Acysd Before shipping, the machine will be professionally cleaned by a specialized company. Tools, holders, chucks, and other accessories used with the machine are included. Transportation is the responsibility of the buyer. Please contact me via email or WhatsApp for more information.