Used Groove for sale (1,267)

Condition: excellent (used), Year of construction: 2008, operating hours: 8,000 h, Four-sided planer Weinig Gsdowybrnopfx Afnstu Model Powermat 400 LE - machine with ribbed table Year of manufacture: 2008 Operating hours: 8000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: - bottom 5.5 kW - left and right – 7.5 kW each - top – 7.5 kW - bottom – 7.5 kW Spindle speed: 6000 rpm Feed speed steplessly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, complete with cutter heads.

Condition: ready for operation (used), Year of construction: 1970, stroke 300MM max width 32MM Gjdpfx Asv D Dxtsfnetu tooling

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each in X-direction 1 drilling spindle each in Y-direction Godpfjyg E R Hsx Afnotu Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from top edge of workpiece Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 – 7,500 rpm, frequency-controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 KW Tool holder: for shaft diameter d = 25 mm Maximum tool diameter: 60 mm Tool clamping length: min. 65 mm / max. 95 mm Maximum tool weight: 2.5 kg Tool change: manual, ETP 25 hydro quick-clamping system Direction of rotation: clockwise/counterclockwise Speed: 6,000 – 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. output at tool: up to 5/6 kW in continuous / intermittent operation (S1/S6-50%) EQUIPMENT Material infeed "IgeL-ROBOT" Lower machining support Upper machining support Vertical drilling unit 2V21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90° Milling unit F2-ETP-6 KW Barcode reader Manufacturer: Datalogic

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 230 t, throat depth: 300 mm, distance between stands: 4,050 mm, back gauge: 600 mm, working length: 5,000 mm, TECHNICAL DETAILS Pressing force: 230 t Bending length: 5,000 mm Godpsyg D Abjfx Afnstu Distance between uprights: 4,050 mm Installation height: 800 mm Ram stroke: 500 mm Throat depth: 300 mm Backgauge: 600 mm Control: BC 45 Graphic MACHINE DETAILS Total power requirement: 18.7 kW Machine weight: approx. 22.0 t Space required: approx. 6.0 x 2.2 x 3.75 m EQUIPMENT 4 backgauge fingers Crowning device Manual finger height adjustment via crank 140 mm Front groove in the table Various tools

Condition: excellent (used), Year of construction: 2023, Ref: 11068 . 2023 Kolbus BLW 200 + BLT 200 ‘Boxline’ Wrapper & Taper Line The Boxline Wrapper is a fully automatic laminating machine for producing packaging, lids, and boxes by forming plates The Boxline Taper is a sealing tape machine for automated fold-up and taping of punched or grooved box blanks up to 40 products/min Features - BLW 200: Non-stop, four-sided laminating panel blanks without forming tools at up to 40 cycles per minute, even with deep and short wraps Box size and model changeover without changing the forming tools Clear and simple computerised operation including integrated robot Non-stop wrapping of all four box sides; processing for each side can be optimized separately Continuous transport, alternate sides wrapped sequentially, tolerance compensation Precise automated edge turning for deep and shallow turn-ins Fast, cost-effective format changes simply by swapping the forming plates Higher quality – lower resource consumption Features - BLT 200: Coupled inline with BLW 200 Wrapper Fold-up station 4 hot sealing tape applicators Delivery via conveyor belt Automated format set-up Specifications: BLW 200 Min. Max. Box length: 56mm 570mm Box width: 56mm 360mm Box height: 15mm 170mm Board thickness: 1mm 3mm Cloth length: 120mm 815 mm Cloth width: 120mm 605mm Wrap dimension: 15mm 85mm Side wrap dimension: 15mm 85mm Mechanical speed: 40 cycles/min Box height > 135mm: 25 cycles/min max BLT 200 Min. Max. Cardboard blanks: 86x86mm 735x525mm (width x height) Size range box: 56x56x15mm 360x570x170mm (width x length x height) Gedpfx Afjyg E Irenjtu Thickness cardboard: 1mm 3mm Mechanical speed: 40 cycles/min Box height > 135mm: 25 cycles/min max

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 92552, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, planing height: 120 mm, power of feed motor: 1,500 W, working height: 120 mm, 🪚 2001 Weinig Quattromat 23P Planer Moulder – Industrial Performance in Very Good Condition Now available for sale: a 2001 Weinig Quattromat 23P, one of the industry’s most reliable and compact 4-sided planing and moulding machines, ideal for workshops producing mouldings, profiles, cladding, architraves, and more. This unit is in very good condition, fully operational, and perfect for businesses looking to increase productivity with a trusted European-built planer moulder. ✅ Key Features – Weinig Quattromat 23P Year of Manufacture: 2001 Condition: Very Good – well-maintained, and ready to run Working Width: 13 to 230 mm Working Height: 6 to 120 mm Number of Spindles: 4 Spindle Diameter: 40 mm Spindle Speed: 6,000 rpm Feed Speed: Variable up to 20 m/min Power: Approx. 21 kW combined spindle power Gtsdpfx Afswnr Ensneu Infeed Table: 1,800 mm Pneumatic Pressure System: For consistent timber hold-down Digital Readouts: For quick and accurate spindle positioning Straightening spindle motor: 4 - 7.5 KW (5.5 - 10 HP) Vertical spindles motor: 5.5 - 11 KW (7.5 - 15 HP) Top spindle motor: 4 - 11 KW (5.5 - 15 HP) Feed motor: 1.5 KW (2 HP) Spindle speed: 6,000 rpm Spindle diameter: 40 mm Tool cutting circles of moulding spindles: 125 - 200 mm Adjustment range of spindles (axial): 30 mm Adjustment range of straightening spindle: 5 mm Feed speed: 8 m/min. Feed roller diameter: 140 mm Feed roller width: 2 x 50 mm Width of roller in the outfeed table: 50 mm Adjustment range of straightening table and edge-jointing fence: 10 mm Height of right fences: 60 mm Length of straightening table: 2 m Reference engraver with cutter: Yes Pneumatic pressure for feed rollers: Yes Pneumatic adjustment of infeed roller in front of 1st bottom spindle: Yes Pressure roller from above and left in front of machine infeed: Yes 🛠️ Machine Capabilities 4-sided planing for smooth and dimensionally accurate timber Profile moulding (e.g. tongue & groove, chamfering, rebating, etc.) Batch production of window, door, or cladding components Compact footprint – ideal for smaller workshops or mobile production lines Easy spindle access and minimal setup time 📦 Included with Machine Weinig Quattromat 23P base unit Dust extraction ports Original manuals and operator instructions Fully tested, serviced, and ready for production 🪵 Perfect For: Joinery workshops Timber frame manufacturers Furniture makers Shed and fencing producers Custom millwork and architectural moulding shops 📍 Availability & Delivery The machine is in stock now and available for immediate inspection and dispatch. We offer delivery across Ireland, UK and Europe. 📞 Contact Us Today Boost your timber processing capabilities with this robust and accurate Weinig Quattromat 23P. Weinig Quattromat 23P for sale Used Weinig planer moulder in very good condition 4-side planer moulder woodworking machine Industrial wood planer for moulding production Compact planer moulder for small workshops Weinig planing and profiling machine UK / Ireland / Europe Second-hand Weinig machinery for woodworking

Condition: good (used), Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories -Clamping tool: clamping bracket, various designs -Groove: 27 x 85 mm -Price/Delivery: complete -Transport dimensions: 480/460/H45 mm Gtjdexrnb Djpfx Afnou -Total weight: 39.7 kg

Condition: good (used), Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket -Drive wheel: Conveyor chain wheel with 11 teeth -Division: approximately 100 mm -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm with groove Gjdjwztxpopfx Afnjtu -Number: 6x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Condition: excellent (used), Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Carbon electrode package of 50 pieces -Type: Carbonair 10 x 305 Gjdpfx Asyiad Refnotu -Identification number: W Quantity: 9 packages available -Price: per package -Transport dimensions: 320/105/H55 mm -Weight: 2.1 kg/package

Condition: excellent (used), Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 6.5x305 mm -Identification number: 515.0017 -Quantity: 5 packages available Gtedeyiaa Sjpfx Afneu -Price: per package -Transport dimensions: 320/80/H45 mm -Weight: 1.3 kg/package

Condition: good (used), Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 8.0x305 mm -Identification number: 515.0018 -Quantity: 10 packages available -Price: per package Gtjdpfx Afsyh U T Renju -Transport dimensions: 320/90/H50 mm -Weight: 1.6 kg/package

Condition: good (used), Groove electrode, stick electrodes, carbon joint rods, carbon electrodes Gsdpfx Asyh U Iujfnotu -Manufacturer: Binzel-abicor, Abiarc carbon electrode, pack of 50 pieces -Type: DC 13.0x355 mm -Identification number: 515.0020 -Quantity: 5 packages available -Price: per package -Transport dimensions: 365/140/H75 mm -Weight: 4.6 kg/package

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details. • Working field (max panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saws: 2 (X and Y) • Max. saw diameter: 120 mm • Max. speed: 6,000 rpm • Vacuum table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cups height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guideways on all axes • Central automatic lubrication • Control and software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability Gsdpfx Afjyi U Elenotu • Parametric programming • Remote service package (internet-ready)

Condition: as good as new (ex-display), centre height 130 mm spindle bore 18 mm ratio 40:1 Gtjdpfxsuvd Axe Afneu swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), table length 800 mm Gtsdeumndbopfx Afnju table width 320 mm groove width 20 mm dimensions of the machine ca. 800 x 320 x 250 mm Fixed angle table for attachment to tool milling machine with water drainage. Machine dealer with own stock of 1600 m².

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition Gtjdpfsw Nklhex Afnsu

Condition: ready for operation (used), Year of construction: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine. Additional equipment • Gluing Unit for Hot-Melt Adhesive: Single roll/strip magazine for roll material up to 3 mm and strips up to 12 mm • End Trimming Unit: 2 motors, each 660 W, pneumatic swiveling 0° + 25° Machine Benefits Technical Machine Benefits • Min. Feed width: 244 mm (in longitudinal processing) • Max. Feed width: 3300 mm • Max. Workpiece width (with chain conveyor extension): 1300 mm • Min. Workpiece thickness: 8 mm • Max. Workpiece thickness: 45 mm (with copying function) / 60 mm (without copying) • Max. Feed width: 3300 mm • Fixed reference side: on the left in feed direction Extra Information Scoring Saw: 22 kW motor, 6000 rpm, pneumatically controlled Rough Trimming Unit: 80 kW motor, 6000 rpm Double Milling Unit: 2 motors, each 45 kW, 9000 rpm Flush Milling Unit: 2 motors, 1850 W, 12000 rpm Gtedpsx D I D Aofx Afnsu Multifunction Unit: NC-controlled with 2 motors, automatic tooling for 4 profiles Buffing Unit: 2 motors, each 180 W, 1400 rpm Grooving Unit: 45 kW motor, 9000 rpm Control Unit ICOS OPEN: PC-based control system with integrated PLC and electronic path control, user-friendly interface with Windows standards

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation Gtodpfxsxw Ii Ss Afnsu 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: good (used), Nabertherm High-Temperature Furnace 1600 °C Gjdpfxowxwa Ee Afnjtu The HT 04/16 - HT 450/18 high-temperature furnaces have proven themselves in the laboratory and in production for many years. Whether for quartz glass, glass-ceramics, the sintering of CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction and compact, floor-standing design, these high-temperature furnaces are ideal for laboratory processes that require the highest precision. Excellent temperature uniformity and sophisticated details set unsurpassed quality standards. Tmax 1600°C Double-walled housing construction with fan cooling, resulting in low outer wall temperatures Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special backing insulation Side insulation, constructed from tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel swing door with chain guide for defined opening and closing of the door Labyrinth seal ensures minimal temperature loss in the door area Exhaust air vent in the furnace ceiling Heating element control via thyristors NTLog Basic for Nabertherm controller: Recording process data via USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Electrical connection: 3-phase Weight (kg): 150 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2019, condition: excellent (used), Westphal Mechanik C7x Commutator Slotting Centre Machine No. M64127 Year of manufacture: 09/2019 The commutator slotting centre has four machining steps. The following components are approached in the steps: Contact slitting saw Insulating grooving saw Deburrer Brush The Stäubli TS 80 robot with SP1 control has two grippers that pass the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Gedpfxjg H Inzj Afnjtu Logo designer  Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC  More pictures via this link. Further technical data will follow shortly.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder perfect binder with PUR with remote diagnostics with cooling and drying section with three-knife trimmer - System DGR D09 with compressor Base machine for standalone or inline operation for linking with a three-knife trimmer Equipment: - rotary cover feeder with integrated vacuum technology Winjector R - creasing station with split creasing tools for two and four grooves - cover alignment and pressing station incl. 1 set of standard press bars - lifting unit with gripper system for lightweight products Gtodjimqucepfx Afnju - stack delivery (upright delivery) - industrial PC with TFT color display and touch-screen functionality - graphical user interface Navigator E - motorized thickness adjustment * Mobile PUR spine gluing unit – Europe for the production of perfect bound brochures with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR drum melter * Cooling and drying section * Hotmelt side gluing unit mounted on the spine gluing unit * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of perfect bound products in offline or inline operation -Offline or inline operation possible * Compressor unit 1800 dm³/min.

Condition: reconditioned (used), Year of construction: 1979, Manufacturer: TAKRAF Type: Windwerk trolley Year of construction/conversion: 1979/1999 load capacity appr.: 40.000/8.000 kg max. hook path appr.: 12,500 mm trolley track appr.: 2,240 mm Reeving: 4/2 Thruster group: FEM/ISO 2m/M5 Gjdpfxekqlghe Afnotu Working speeds: Hoist 40 t multi-stage up to appr. 5.0 m/min Auxiliary lift 8 t multi-stage up to appr. 8.0 m/min Cross travel multistage up to appr. 12.0 m/min Certification of the remaining useful life of approx. 80% by an inspection expert Equipped with: - Main hoist 40 t and auxiliary hoist 8 t - double-grooved rope drum without hook travel - Rope and bottom block

Condition: like new (used), Year of construction: 2008, amount 1 STK The tool shown in the illustration is a Sandvik Coromant T-Max Q-Cut head for grooving, identified more precisely by part number 570-40R 1513-09-50. Gsdsyh Rl Nepfx Afnotu Manufacturer: Sandvik Coromant Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inlet

Condition: new, functionality: fully functional, Fast universal talent for furniture construction and more Gjdpjtu I Ntjfx Afnstu 9 controlled axes High axis speeds: 130 m/min / X-axis 75 m/min / Y-axis Machining of even the smallest parts (from 70x35 mm) Genuine 6-sided machining 2 automatic, independently controlled clamping grippers Horizontal machining also from the gripper side 3 independent drilling heads with a total of 47 drilling spindles grooving saw unit Milling spindle top and bottom Air cushion table in the infeed and working area Panel return in the outfeed Barcode scanner

Condition: ready for operation (used), Year of construction: 2018, This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. Equipped with a HSK-F63 tool holder system, 12-position disc-type tool changer, and a BIESSE BH 10 drilling unit with comprehensive vertical and horizontal drilling capabilities. It also includes a grid vacuum table, dual 500 m³/h vacuum pumps, and is DXF file compatible. Contact us for more information about this machine. • Weight (kg): 3000 • Main Spindle: 1 spindle, 13.2 kW • Axes: 4 • Working Area (X × Y): 3765 × 1560 mm • Torque Support: 4th axis (C-axis rotation) • Tool Holder System: HSK-F63 • Tool Change Positions: 12 (disc-type changer) • Tool Length Measurement: Yes • Drilling Unit: Vertical Drills: 10, Horizontal Drills: 4 (X direction), 2 (Y direction) • Grooving Saw: In X direction • Vacuum Table: Grid table • Vacuum Pumps: 2 × 500 m³/h • Extraction System: Sweeping arm discharge device • Lubrication: Automatic Gjdpfex D Iqvjx Afnjtu • Air Blowing Device: Yes • Control System: Interface with DXF file compatibility • CE Marked: Yes • Tools, tool holders, aggregates, and mechanical clamps shown in photos or videos are not included in the scope of delivery.