Used Groove for sale (1,300)

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Rcodpez Dfr Ijfx Akieh Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: new, Year of construction: 2026, Brand new, high-precision vertical broaching machine – a machine of exceptionally high quality. CNC-controlled vertical broaching machine with two, three (or four) CNC axes and electronic control of the rotary table with a positioning accuracy of 0.001°. For the efficient production of spline grooves (including tapered and tangential grooves) – keyways, internal and external gears, racks, etc. CNC control with a 10” color display and touch screen – software for roughing, finishing, and fine finishing (to achieve surfaces with the highest possible quality). Stroke range of the broaching tool holder: 10 to 250. Broaching tool holder speeds: 22 to 90 strokes/min, infinitely adjustable. Broaching tool holder swivel range: +/- 20°. Rotary table size: 450 mm. Bore in the rotary table: Ø 135 mm. Maximum table load: 1,250 kg. Table travel distances, longitudinal and transverse: 250 x 225 mm. Drive power, servomotor for the broaching tool holder: 3 kW. Rodpoz Dpcqofx Akioch Machine dimensions without control console: 1.3 x 1.45 m x approx. H 2.6 m. Machine weight: approx. 1,700 kg. - Automatic, electronically monitored central lubrication system for the guide rails. - Cutting fluid system for cooling and lubricating the broaching tools. Other models available.

Condition: used, functionality: fully functional, Year of construction: 2023, machine/vehicle number: 6971, load capacity: 230 kg, empty load weight: 1,550 kg, fuel type: electric, total length: 1,900 mm, drive type: Elektro, construction width: 760 mm, working height: 7,800 mm, Scissor lift Chassis number: 6971 Condition: Ready for operation and fully functional Redozydv Hjpfx Akiech Technical condition: Good Front tyre type: Non-marking Front tyre condition: 80 - 100% Rear tyre type: Non-marking Rear tyre condition: 80 - 100% Battery type: PzS Battery year: 2023 Battery condition: 80 - 100% Description: 2 front drive wheels, theoretical climbing ability of 25%, battery charge indicator and diagnostic display, manual platform lowering valve, control panel on platform and chassis with emergency stop button, multi-disc brakes on front wheels, manual brake release, solid rubber, non-marking tyres without tread grooves, mobile pothole protection, tilt alarm, operating hours recording, lifting and lowering alarm, horn, double flashers, travel alarm, overload alarm.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control/Software MAESTRO Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC with spindles: - No. 24 Independent vertical boring spindles - No. 11 Independent horizontal boring spindles (6 in X + 4 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 6,6 Redpszza Sgsfx Akisch Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions) OPTIONAL: Panel loading robot + Robot for unloading machined panels

Condition: used, mileage: 1,360 km, power: 175 kW (237.93 HP), first registration: 12/2024, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 7,400 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, Year of construction: 2024, Mercedes-Benz Atego 1624 L with TBV refrigerated box, Thermo King T-1300X, and 2,000 kg tail lift – NEW VEHICLE Refrigerated van / refrigerated truck for fresh produce | Diesel & mains power (standby cooling 400 V) | 18 Euro pallets | Side door | Air suspension | Euro 6 (Atego 1524/1624 series) ??? REFRIGERATED BOX ??? NEW, DIRECT FROM MANUFACTURER (TBV, box no. 12763) ??? - Refrigerated box made of solid plastic with reinforced outer and inner laminates, vapor diffusion tight - Internal dimensions approx.: L 7,400 x W 2,470 x H 2,450 mm (approx. 44.8 m³) - External dimensions of the box approx.: L 7,580 x W 2,590 mm, overall vehicle height approx. 3,680 mm - Space for 18 Euro pallets (1,200 x 800 mm) - Wall thicknesses: Roof, floor and front wall 100 mm, rear wall 80 mm, side walls 60 mm - Reinforced front wall for refrigeration unit, incl. cable duct - Aluminum grooved floor, welded with aluminum wear strip (285 mm) - 2-leaf rear doors, stainless steel rear portal, locks and hinges made of polished stainless steel, door fastener - Side door on the right at the front, 900 x 2,000 mm, with door fastener and rain deflector - Fold-out 2-stage step under the side door, step on the underrun protection - 1 row of stainless steel lashing rails on the side walls - 3 LED interior lights, switchable from the cab - LED multi-functional lights at the top of the rear portal - "ButtRoll" impact buffer on the rear portal - Hot-dip galvanized subframe - Conductor pipe for reversing camera prepared - Contour marking on the sides and at the rear - ATP certificate [only if confirmed, see note] ??? REFRIGERATION UNIT ??? - Thermo King T-1300X-50, refrigerant R452A - Running cooling (diesel) + standby cooling 400 V (mains operation) - With heating function - Temperature range: [please complete] ??? TAIL LIFT ??? - Dhollandia DH-LM.20, load capacity 2,000 kg, aluminum platform - Platform height 1,800 mm, two-hand control, low-noise hydraulic unit - Roll-off protection for 2 roll containers - Tail lift switch in the cab ??? CHASSIS ??? - Mercedes-Benz Atego 1624 L 4x2, design type 967.027, year of manufacture 12/2024 - Engine OM 936, 6 cylinders, 7.7 l, 175 kW (238 hp), 1,000 Nm, Euro VI E - Mercedes PowerShift 3 (8-speed automatic), driving program economy/power Rcjdpfxjz El Nps Akioh - High Performance Engine Brake - GVW 16,000 kg (front axle 6,100 kg / rear axle 10,500 kg), wheelbase 5,360 mm - Air suspension rear axle with cable remote control, disc brakes all around, EBS with ABS/ASR - Tires 305/70 R 19.5 - Fuel tank 180 l, AdBlue tank 25 l, tanks lockable - 2 batteries 12 V / 165 Ah, generator 100 A - Vehicle according to GSR Phase B ??? CAB & EQUIPMENT ??? - S ClassicSpace cab, extended (2.30 m) - Air conditioning with pollen filter, additional thermal insulation, sunroof - Comfort air-suspended driver's seat with armrests - Cruise control, rain and light sensor, LED daytime running lights - Electric windows, central locking, heated electric main mirror - Radio with Bluetooth and USB - Digital tachograph 2nd generation (Smart Tachograph V2) - FleetBoard Eco Support, Truck Data Center, TruckLive ??? SAFETY & ASSISTANCE ??? - Active Brake Assist 6 - Active Sideguard Assist 2 (turning assistant) - Frontguard Assist - Lane keeping, attention and traffic sign assistant - ESP, tire pressure monitoring, reversing warning system

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Rcodpsz Dw Emefx Akieh Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Redpfoz Iczusx Akioch Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: good (used), Year of construction: 2009, Multrip saw for grooving foam/plywood/MDF/composite Maximum working width : 2500 mm Maximum cutting hight : 50 mm Infeed conveyer table with adjusteble speed Has been used for cutting tracks in foam, for the inner core in windmill wings ( so the foam can bend in any angle ) Can be used to cut tracks/grooves in plywood/MDF/composite/simillar. Rjdoz Ii N Espfx Akiech

Condition: used, Biesse Skipper V31 CNC drilling center Working area: Length X: 3200 mm Width Y: 900 mm Thickness Z: 70 mm Feed rate: X-axis: 25 m/min Y-axis: 50 m/min Z-axis: 25 m/min Rjdez Hx Nrspfx Akiech Drilling head motor power: 1.7 KW 10 vertical drilling spindles, 6 horizontal drills (4 drills on the X-axis, 2 drills on the Y-axis), Saw for grooving on the X-axis, Biesse Works software 700 operating hours 4.5 KW milling spindle, ISO30 chuck with stepless speed adjustment up to 18,000 rpm. CE marking Machine in good condition, drilling unit and axes operate quietly, weight 1,300 kg

Condition: excellent (used), FLEXIBLE CNC DRILLING AND MILLING LINE, for drawer fronts (or similar panels) 231200A) Automatic panel loading system, with “KUKA” robot, Mod. KR 120 R3200 PA 231200B) “COMEC” CNC machining centre (panels through-feeding) Mod. Frontal 1000 3S CN CA Gantry (Portal) CNC machine - Overall integral safety cabin (enclusure) of the machine Movable panel (workpiece), horizontal position - Movable working head Panels (workpieces) feeding by motorized belts Rcedpezxn Nzjfx Akijh In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 50 x 15 Maximum workpieces dimensions (X - Y - Z) mm 1100 x 350 x 30 Total installed power (Kw) 28 (ca.) WORKING GROUPS 1st station: upper vertical CNC drilling (point-to-point) 2nd station: CNC milling for slots/grooves (with horizontal electric spindle) 3rd station: 2 upper vertical CNC drilling units (point-to-point) 4th station: lower vertical CNC drilling (point-to-point) 231200C) Automatic panel unloading system, with “KUKA” robot, model KR 120 R3200 PA

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Rcedpfxjzqtzte Akieh Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Rjdpozqzhbefx Akioch Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) Rcsdpszu T Smefx Akieh SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer Rcedpfx Akezvduusieh - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: good (used), clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Clamping table: with T-slots -Groove width: 20 mm, groove spacing 69 mm -Guide rail: with rack Rcodpfevmm Aaox Akioh -Dimensions: see photos / technical drawing -Dimensions: 3300/285/H185 mm -Weight: 397 kg

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp Rodou N Sh Djpfx Akioch -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

Condition: new, neu Rcedewiqnkspfx Akijh ca. 10 Wochen ab Auftrags Türkei 7000 € 135.1 € 1550 mm 2 mm 90 mm 6 m/min 1.5 kW 2130 mm 700 mm 1200 mm 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,-

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm Rcedpewirv Nofx Akish 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Rcedpfewuzr Dsx Akieh -Clamping cube: with T-slot, solid design -Groove width: 10 mm -Dimensions: see photos / technical drawing -Dimensions: 230/155/H365 mm -Weight: 14.7 kg

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm Rjdpfx Ajwuz Raskisch -Dimensions: see photos / technical drawing -Dimensions: 215/70/H105 mm -Weight: 5,1 kg

Condition: refurbished (used), functionality: fully functional, Hello, We are offering rebuilt ER-093996 Square 25 Holder C from Erowa. The holders were converted from the old version ER-010607 without gripper grooves and sealing plate. Rcodpfxowa Sffo Akish We completely disassembled, blasted, cleaned, and readjusted them. Including clamping spigots. You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance.

Condition: used, offer consists of: Rjdpfx Akeu Srw Rjijch creasing machine We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02-84-022, power: 37 kW (50.31 HP), 4-SIDE PLANER/MOULDER, 4 CUTTERHEADS + UNIVERSAL SPINDLE, 2.5M TABLE & HEAVY-DUTY MOTORS Brand: CASADEI Model: MATRIX 4+1 Redpfxeu Sr Ivj Akiech Serial No.: 02-84-022 Year: 2002 WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm - 4-sided planer and moulder - Working width: 25 to 230 mm - Working height (timber thickness): 6 to 155 mm - Max. finished timber section: 155 x 230 mm - Min. working length: 480 mm - Adjustable cutting depth: max 10 mm - Spindle rotation speed: 6,000 rpm PLANER/MOULDER CONFIGURATION: - Sturdy welded steel frame - Soundproof panoramic hood with gas struts - Raised operator control panel - 2,500 x 250 mm steel infeed table Floor height: 880 mm Side-entry spring-loaded feed roller Manual table lubrication unit after surfacing 1) Bottom horizontal spindle 5.5 kW TERSA cutterhead Ø125 x h.240 mm 1 retractable vertical roller presser 2 & 3) Right then left vertical spindles, 1 x 7.5 kW each TERSA cutterheads Ø125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø125 x h.240 mm Adjustable exit pressure pad 5) Universal spindle 7.5 kW Ø 40 x 255 mm 1 retractable horizontal roller presser FEED SYSTEM: - Variable feed speed: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) - 8 independent pneumatic feed rollers: 2+2 grooved steel, then 2+2 rubber-coated OTHER SPECIFICATIONS: - CE marking - Power supply: 380V, 3-phase, 50 Hz - Lockable main switch, automatic star-delta starters Emergency stops front/rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Cardan shaft spindle drives - Digital readouts (Siko-type counters) for precise manual adjustment of each operation - Electric raise/lower beam for thickness adjustment, Raise/lower motor: 0.37 kW - Axial spindle adjustment: Bottom horizontal: 0 to 15 mm Top horizontal: 0 to 25 mm Verticals: 0 to 25 mm - Acceptable cutter/tool dimensions: On bottom horizontal spindle: Ø 120 to 140 mm Profiling on vertical spindles: Ø 100 to 180 mm Profiling on top horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø140 x 12 x 40 mm - Recommended pneumatic supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connector: 1/2" G - Dust extraction, central upper port: Ø250 mm Required air speed: min. 25 m/sec Airflow: 4,500 m³/h - Technical manual included. - Machine fitted with 4 TERSA shafts Footprint: 4,700 x 1,700 x h.1,800 mm Weight: 2,240 kg Please contact us for supply of consumables, accessories, and/or extraction systems.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Rsdpoxhc Spsfx Akisch Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, Redsxm R Ipjpfx Akijch -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg