Used Grinding Wheel for sale (29,341)

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 30-39 mm -Type designation: not available -Dimensions total Ø 180 x 75 mm -Weight: 5.9 kg Itsdpfx Aaewvp A Tocon

Condition: good (used), Year of construction: 1993, with oil filtration system Ijdow E Ezkspfx Aacetn Unfortunately, no further technical data is available.

Condition: new, Year of construction: 2025, GWDress-250 smartline – Semi-Automatic Grinding Wheel Dressing Machine The GWDress-250 smartline is the intelligent solution for precise dressing of grinding wheels up to Ø 250 mm. With selectable manual or automatic control, dressing processes can be designed flexibly and efficiently. The machine comes standard with an enclosure for maximum occupational safety as well as effective protection against dust and noise. Wet dressing is also possible. Highlights: - For grinding wheels up to Ø 250 mm - Automatic traversing via control system - Can be operated manually or semi-automatically - Enclosure for safety, noise reduction, and dust control - Precision dressing of radii and wheel packs – accurate to within 2 µm - Wet dressing function - Excellent price-performance ratio The perfect solution for all those seeking top precision, ease of operation, and reliability at an unbeatable price. Iedpfx Aasw E E S Aocstn

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t Itedpfx Aaovf Riuscsn dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, Ijdpfxjt Hw Nae Aacstn workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery Ijdpfx Aajvdt I Docetn if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Grinding wheel holder, standard flanges, special flanges -Socket: Ø 35 mm -Grinding wheel holder: Ø 127 mm -grinding wheels width: max. 35 mm -Price: per piece -Number: 4x available -Weight: 5.8 kg/piece Itsdpfx Aasb A Swfocon

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Iodpfxevibc He Aacotn Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel Itodpfx Aajt Hw N Hscen workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, copy head, radius dresser, disc puller Iodpowuz Swefx Aacstn -Puller: Copy head for grinding wheel puller -Dimensions: see photos -Dimensions: 290/230/H170 mm -Weight: 14.1 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller Itjdpfx Aajwuyc Uocen -Puller: Grinding wheel puller -Dimensions: see photos -Dimensions: 195/105/H90 mm -Weight: 2.9 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 46-59 mm / M50 -Type designation: not available Iodpfswuyagjx Aacstn -Dimensions total Ø 180 x 80 mm -Weight: 7,1 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Iodpfowux Ucox Aacetn -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 34-43 mm / M50 -Type designation: not available -Dimensions total Ø 180 x 80 mm -Weight: 7 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-49 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.6 kg Itodpewux S Iofx Aacsn

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-59 mm -Type name: 508x10-100x127 / 508x10-80x127 -Dimensions total Ø 190 x 100 mm Iodpfjwux Szex Aacstn -Weight: 7.7 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Iedpfx Aaewux Snjcjtn -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 38-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 7,3 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Itodowux Shspfx Aacsn -Grinding wheel holder: Holder: Ø mm -Mounting: Hole shaft cone Ø 40-48 mm -Type designation: not available -Dimensions total Ø 180 x 85 mm -Weight: 6.8 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller Itedowux N Hepfx Aacon -Puller: Grinding wheel puller -Dimensions: see photos / technical drawing -Dimensions: 200/135/H190 mm -Weight: 6.8 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller Iedpfx Aaowuqtdjcotn -Puller: Grinding wheel puller -Dimensions: see photos -Dimensions: 280/80/H185 mm -Weight: 8.3 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 Quantity: 1x mounting flange available Ijdswn Dlmjpfx Aacetn -Dimensions total Ø 180 x 105 mm -Weight: 6.5 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Itjdpfjwn Dkvsx Aacon -Grinding wheel holder: Holder: Ø 76 mm -Mounting: Hole shaft cone Ø 45-58 mm -Number: 3x mounting flange available -Price: per piece -Dimensions total Ø 148 x 55 mm -Weight: 3.9 kg/piece

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm Itsdewn Di Sepfx Aacon -Type designation: 407x10-100x127 Number: 5x mounting flange available -Price: per piece -Dimensions total Ø 180 x 100 mm Weight: 7.1 kg/piece

Condition: used, Grinding wheels, grinding bodies -Outer diameter: 555mm -Width: 110mm Isdpfxod Sqyfj Aacstn -Inner diameter: 203mm -T1707801 -Weight: 50.5kg

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies Iodpjrxw E Njfx Aacjtn -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Condition: used, Grinding wheel puller, cup wheel puller, double grinder stand puller, surface grinder puller, cylindrical grinder puller, puller head, dressing head for grinders, grinding wheel dresser, radius dresser, disc puller, grinding wheel puller -Grinding wheel puller: for grinding wheel radius production -Motor power: 0.7 kW -Dimensions: see photos Iodpfeitt Shex Aacjtn -Equipment: coolant connection, dressing device -Dimensions: 600/540/H330 mm -Weight: 49kg