Used Great Cnc Milling for sale (16,393)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, turning length: 285 mm, turning diameter: 280 mm, spindle speed (max.): 3,000 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Turning diameter: max. 280 mm Turning length: max. 285 mm Swing diameter: 400 mm Bar capacity: 51 mm Spindle bore: 65 mm Main spindle Spindle nose: A2-6 Spindle speed: 90–3,000 rpm Spindle power: 5.5 kW Chuck size: 215 mm / approx. 8" X-axis travel: 162.5 mm Z-axis travel: 320 mm Rapid traverse X: 16 m/min Rapid traverse Z: 24 m/min Tool stations: 10 MACHINE DETAILS Control system: FANUC Coolant tank: 90 l Fjdps Afwvbjfx Ab Iogi Dimensions & weight Dimensions (L x W x H): approx. 1,645 x 1,453 x 1,625 mm Machine weight: approx. 2,400 kg Connection voltage: 200 V Frequency: 50 Hz Phases: 3 Connection power: 27 kVA

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: DW1408, spindle speed (max.): 6,000 rpm, bar passage: 42 mm, controller model: Fanuc 0i-TF, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Fgedpfs Ahm Adjx Ab Ioi Number of axes: 7 Axis configuration: X1, X2, Y1, Z1, Z2, C1, C2 Number of Y axes: 1 Number of spindles: 2 Main spindle speed: max. 6,000 rpm Counter spindle speed: max. 5,000 rpm Bar capacity: max. 42 mm Number of tool turrets: 2 Speed of driven tools: max. 5,000 rpm MACHINE DETAILS CNC control: Fanuc 0i-TF Type of input current: Three-phase EQUIPMENT 2 tool turrets Main and counter spindle 173E collet chuck on both spindles Y-axis High machine rigidity and precision Documentation/Manual

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 58281, working width: 1,700 mm, input voltage: 400 V, working length: 2,200 mm, number of slots in tool magazine: 18, control type: CNC control, Rittal Perforex BC 1007 HS CNC drilling and milling centre for automated machining of enclosures and flat panels: cut-outs, holes and threads straight from EPLAN Pro Panel / DXF. Built 2018 in Germany. Machine no. 58281, Rittal part no. 4050.107. Specification: - Clampable flat panels (W x H): 2450 x 1700 mm - Max machinable panel area: 2200 x 1700 mm - Clampable enclosures (W x H x D): 1400 x 1600 x 1600 mm - Max machinable area, enclosures: 1200 x 1600 mm - Tool holder: pick-up system, 18 positions - Control: 4-axis CNC, Rittal OptiPanel, 15" monitor - Electrical supply: 400 V, 3-phase, 50 Hz, 32 A max - Control voltage: 24 V DC - Footprint (W x H x D): 4390 x 2410 x 2720 mm - Transport size (W x H x D): 3800 x 2300 x 2500 mm - Weight: approx. 2,300 kg Key features: - Enclosure (cube) and flat-panel machining Fsdpfx Abo Ahq D He Iogi - Pressure plate with swarf extraction - High-performance spindle, minimum-quantity lubrication - Automatic tool breakage check - Pneumatic clamping, DIN tooling - Machines mild steel, stainless, aluminium, copper and plastics - Direct import from EPLAN Pro Panel, DXF import Supplied with: - Safety guarding with light curtains - Operator console and keyboard - Tool magazine with tooling - Rear enclosure-machining bay - Control cabinet - Operator documentation Specification from Rittal published data for the BC 1007 HS; buyer to verify configuration on inspection. Viewing by appointment in Sunderland, UK. Buyer to arrange disconnection and collection unless agreed.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 17,000 mm, travel distance Y-axis: 4,800 mm, travel distance Z-axis: 1,500 mm, table length: 16,000 mm, table width: 3,000 mm, spindle speed (max.): 3,000 rpm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, distance between stands: 3,800 mm, type of input current: three-phase, position of the milling head: vertikal / Winkelkopf, rotational speed (max.): 3,000 rpm, distance table to spindle center: 2,300 mm, overall weight: 90,000 kg, spindle nose: ISO 60 / ISO 50 Adapter, spindle motor power: 60,000 W, Equipment: rotational speed infinitely variable, ➡️ WALDRICH COBURG CNC GANTRY MILLING MACHINE ⬅️ Heavy Duty Machining | Siemens 840D Retrofit | Ready for Production High-quality CNC gantry milling machine manufactured by Waldrich Coburg available for sale in very good condition. ✔ Machine under power ✔ Inspection & test run possible ✔ Siemens 840D retrofit (2013) ✔ New electrical system & cabinets ✔ New motors & drives ✔ Heidenhain glass scales on all axes ✔ Ideal for large part machining & heavy-duty applications Technical Data X travel: 17,000 mm Y travel: 4,800 mm Z travel: 1,500 mm Floor plates: 16,000 x 3,000 mm Distance between columns: 3,800 mm Distance table to spindle face: 2,300 mm Spindle power: 60 kW Spindle speed: 0.4 – 3,000 rpm Fgsdpfsy Rrb Isx Ab Ioi Tool taper: ISO 60 / ISO 50 adapter Machine weight: approx. 90,000 kg Equipment Siemens 840D CNC control 2-step gearbox Right angle head WFU 250 with automatic indexing Right angle head WFU 500 with automatic indexing Rapid tapping Tool trolley with tool holders Steel way covers on X/Y axes 2 chip conveyors Perfect for: Heavy machining Machine building Energy industry Shipbuilding Steel & rolling mill industry Subcontract manufacturing 📍 Location: USA 🌍 Worldwide shipping can be arranged 📞 Please contact us for more information, videos, or inspection appointments.

Condition: excellent (used), Mazak Integrex i-200 5-Axis CNC Mill Turn Centre Year: 2017 Mazatrol Smooth CNC Control Full 5-Axis Simultaneous Machining B-Axis Milling Head C-Axis Main Spindle Kitagawa BB08 Hydraulic Chuck SMW Autoblok (SMW) Hydraulic Power Steady Maximum Machining Diameter: 658 mm Maximum Turning Length: 1,519 mm Fedpfxj Aidxie Ab Ijgi High-Speed Milling Spindle Automatic Tool Changer Renishaw Inspection Probe Renishaw Tool Setter Swarf Conveyor FSE High-Pressure Coolant Filtration System A-Mist Oil Mist Extraction Unit Fully Enclosed Guarding Automatic Lubrication Coolant System

Condition: used, Year of construction: 2022, CNC Machining Center Rated voltage 3/PE AC 220 V Rated current 80 A Rated frequency 50 Hz Ampere interrupt capacity 42 kA Short-circuit current rating 2.5 kA Electronic drawing no. Y200894E Weight 2,600 kg Air supply 0.5 ~ 0.7 MPa Max. spindle speed 24,000 rpm Second plate: power 3P 220 V / 100 A, air 0.5 MPa, date 2022.02.18 Oil Cooling Unit Power source 3~200 V 50 Hz, 1.36 kW / 4.9 A Power source 3~200 V 60 Hz, 1.43 kW / 4.8 A Power source 3~220 V 60 Hz, 1.43 kW / 4.6 A Compressor 0.75 kW Pump 0.4 kW Fan 54 W Refrigerant R410A 0.72 kg Refrigerant pressure (high/low) 4.1 / 0.7 MPa Weight 56 kg Year of manufacture 2021 MFG. No. 1211-210-0020A Tank capacity 35 L Chiller Model number PFCC 150 LHT-S-C Serial number PFCC 150-5165 Year of production 2022.03 Main power source 3Φ 220 V 50/60 Hz Power consumption (max.) 5.5 kW Rated current (max.) 20.1 A at 220 V Cooling capacity 4900/5300 kcal/Hr Refrigerant R-410A Fjds Aidqiopfx Ab Isgi Transformer Standard EN61558-2-1:2007, type A.N Phase 3Ø Frequency 50/60 Hz Capacity 35 kVA Connection Y-Y Primary voltage 380 V, 400 V, 415 V, 440 V Secondary voltage 200 V, 220 V Insulation class F Weight 225 kg Date 2022.1 End-User Certificate required - Export from the European Union only after consultation with Samsung.

Condition: excellent (used), Year of construction: 2021, operating hours: 27,790 h, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 9,540 h, spindle nose: HSK-A63, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling center universal Manufacturer: DMG MORI Model: DMU 50 3rd Year of manufacture: 2021 Control system: Celos with Siemens 840D sl Operate Technical Specifications: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main Spindle: Speed range – main spindle: 20–20,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Tool Changer: Tool holder: HSK-A63 Number of tool positions: 30 pos. Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 27,790 h Spindle hours: approx. 9,540 h Technical Features & Accessories: - Active spindle cooling - Direct position measurement system in x, y, z, b, c - Internal coolant supply, 20 bar, consisting of: - 245-liter tank - Spindle rotary joint - Chip conveyor - Cab roof - Coolant/blow-off air switch - Flushing gun for chip flushing - Infrared probe, Renishaw PP60 (if available) - Laser tool measurement Fsdpfx Abo Ain Rns Iegi - Preparation for 3D quickSET - Operating mode 4 - Electronic handwheel - PROFIBUS automation interface, automatic loading via operator door, 2-channel safety circuits - Prepared for robot-side control of the clamping system, including 4-way rotary feedthrough - Machine-side automation software interface for connection to a master computer (Siemens CMI) Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information.

Condition: good (used), Year of construction: 1998, operating hours: 95,843 h, functionality: fully functional, machine/vehicle number: 313369, For sale is an extremely robust and precise Gildemeister CTX 400E universal lathe, manufactured in 1998. This machine comes from a factory liquidation and is characterized by its high durability and solid construction. It is ideally suited for precise single-piece and series production. The machine is fully functional and can be inspected while powered on. Equipment: - 3-jaw chuck - 11-position tool turret (some powered tools) - Automatic tailstock - Control panel, Heidenhain CNC Pilot control system - Chip conveyor Accessories: - Workbench (5 drawers, 1 door) with partition Contents: Hand tools Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing options that adapt to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. Upon request, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors! Fgjdpfe Afpmxjx Ab Iji

Condition: like new (used), Year of construction: 2023, operating hours: 140 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 14,000 rpm, operating hours of spindle: 45 h, spindle nose: BT40, number of slots in tool magazine: 60, Equipment: chip conveyor, CNC- milling center universal Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 50 2nd Complete Year of Manufacture: 2023 Control System: Celos with Siemens 840D sl Operate Technical Specifications: Travel Ranges: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm Main Spindle: Fjdpfx Aj Ain A Ieb Iegi Speed range – main spindle: 20 – 14,000 rpm Drive power – main spindle (100/40%): 20.3 / 14.5 kW Tool Changer: Tool holder: BT40 Number of tool positions: 60 pos. Feed rates: Rapid traverse (x/y/z): 30 m/min Operating hours: approx. 140 h Spindle hours: approx. 45 h Technical Features & Accessories: - Rotary table, capable of simultaneous operations - Direct position measurement system in x, y, z, b, c - Internal coolant supply, 40 bar, consisting of: - Paper belt filter - 600-liter tank - Spindle rotary joint - Enclosure roof - Rotating viewing window - Rotary joint - Chip conveyor - Flushing gun for chip flushing - Coolant/blow-off air switch - Preparation for 3D quickSET - Infrared probe, Renishaw PP40 (if available) - Tool probe, Renishaw TS27R (if available) - Electronic handwheel (if available) Accessories, tools shown in the illustration, and clamping devices are included in the scope of delivery only if noted in the additional information.

Condition: used, Year of construction: 2005, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Onetouch IGF-M-D greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors Fedpoz Ig Swefx Ab Ijgi spindle load monitor B Spindle 1 Chuck SMW 300 mm Soper solid CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets with a maximum of 24 positions for rotary toolholders. A comprehensive package of toolholders comes with the machine. An Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 5 identical machines available, all in very good and well maintained condition. *

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Fodpfx Aez N H Enob Iegi Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2024, 2024 Mazak Integrex J-200S 5-Axis Multi-Tasking CNC Lathe With Mazatrol Smooth G Control Main Spindle Hainbuch Ø215mm 3 Jaw Power Chuck, Sub Spindle Kitagawa B-208 3 Jaw Ø210mm Power Chuck. Maximum Swing Ø530mm. Maximum Swing Over Cross Slide Ø530mm. Maximum Machining Ø500mm. Maximum Bar Working Capacity Main Spindle Ø65mm, Sub Spindle Ø51mm. Maximum Machining Length 910mm. Maximum Support Weight Main Spindle Chuck Work 200kg, Maximum Support Weight Sub Spindle Chuck Work 200kg. Axis Travel 'X'=450mm, 'Z'=1,119mm, 'Y'=200mm, ,W,=1,436mm, 'B'=–30° To 210° (5° Increment'), C'=0.0001° Increment. Rapid Traverse 'X'=40m/min, 'Z'=40m/min, 'Y'=40m/min, 'W'=30m/min,C'=555rpm. Main Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-6”. Spindle Bore Ø76mm, Sub Spindle Speed Range 35-5,000rpm (11kW Motor). Main Spindle Nose JIS A2-5". Maximum Milling Spindle Speed 12,000rpm (7.5kW Motor). 72 Position ATC. Spindle Nose Capto C6. Turning Tool Shank 25mm², Boring Bar Ø40mm, Maximum Tool Ø125mm, Maximum Tool Length 210mm. Power Requirement 35.34kVA. Power On Hours 2,127. S/No.354479 (2024). NOTE: A loading fee will be added to buyer's invoice of £100 + VAT. Fgsds Ahg S Eepfx Ab Isi With Through Coolant System, Cromar Chip Conveyor, Habor HBO-750PTSBM8 Oil Cooler, Habor HJ-400PSBM2 Oil Cooler, GTI GT 10L Slim Oil Mist Extractor, Parts Cathcher, Foot Switches, Signal Tower, Tooling Package (Consisting Of Kitagawa B-208 3 Jaw Ø210mm Power Chuck, Hainbuch Collets & Assorted Tooling) & Manuals (CD). Overall Machine Dimensions L3,790 x W2,420 x H2,500 mm. Weight 9,800kg.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, table width: 400 mm, table length: 800 mm, overall weight: 5,300 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HURON VX8 NVU TECHNICAL SPECIFICATIONS: - Date of manufacture: November 2021 - Power-on hours: approx. 9 758 h - X-axis travel: 820 mm - Y-axis travel: 510 mm - Z-axis travel: 510 mm - CNC control: HEIDENHAIN TNC 620 - Max. spindle speed: 10 000 obr/min - Table dimensions: 800 × 400 mm - Tool magazine capacity: 24 tools - Chip conveyor - EUROCOLD H2021P473 cooling unit - 3-jaw lathe chuck - 2 HILMA NC 160 machine vises Fsdpfxo Aifm To Ab Iogi - Machine weight: approx. 5 300 kg The machine is in very good technical condition, connected to power and available for inspection and testing on site by prior appointment. Professional loading is included in the price. Accessories, tools and clamping devices shown in the photos are included in the offer only if explicitly listed under equipment. Technical specifications are provided for reference only and may contain inaccuracies. The machine is subject to prior sale.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: TLUY7024, turning length: 600 mm, turning diameter: 250 mm, spindle speed (min.): 4,000 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 86 mm, rotational speed (min.): 4,000 rpm, bar passage: 76 mm, total height: 1,900 mm, total length: 4,500 mm, total width: 2,200 mm, overall weight: 6,500 kg, Equipment: documentation/manual, Takisawa TA25 CBT lathe Main spindle: collet chuck for SK65BZI collets (jaw chuck for the main spindle SMW Autoblock 250BB available) Tailstock: with jaw chuck or alternatively, collet chuck for 173E collets 12-position turret, all positions powered. Includes 25 tool holders (6 powered) Fanuc 18-T control + Manual Guide control Operating hours in automatic mode: 16,800 hours Fsdpfx Asz Smhpjb Isgi The machine has the drive for the powered tools in the turret removed. Otherwise, the machine can be fully used without the powered tools and can be inspected while powered on. Complete manuals and documentation Includes FMB 10-65 loading magazine with traversing unit Optically and technically in very good condition, hardly used. Year of manufacture: 2018 D60 conversion kit is installed Ex works

Condition: used, Year of construction: 2021, turning diameter 320 mm turning length 530 mm greates pass round over bed 610 mm control SLIMline Operate 4.7 Siemens Swing dia. over traverse guideway 400 mm Max. rpm 5.000 min/-1 power capacity - main spindel 16,5 / 11,0 kW max. Torque 168 / 112 Nm spindle diameter in front bearing 120 mm max. bar capacity 65 mm max. chucking diameter 320 (250) mm chucking diameter 210 mm spindle nose A2-6 number of toolpositions 12 pos. tool taper VDI 30 driven statition 12 pos Spindle speed - driven tool stations max. 6.000 min -1 power capacity - driven tool-stations 5,44 kW max. Torque 15 Nm tailstock travel 550 mm taper of center MK 4 tension force 4 kN x-axis 242,5 mm y-axis +/- 40 mm z-axis 540 mm rapid traverse X: 30 m/min rapid traverse Y: 22,5 m/min rapid traverse Z: 36 m/min total power requirement 28 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 4,0 x 3,2 x 2,1 m CNC - Turning- and Millingcenter DMG MORI - CLX 350 V4 - From a facility closure - Extensive accessory package - Fully equipped - Only approx. 1,053 spindle hours - Only approx. 6,684 power-on hours - Chip removal package - "Alternating Speed" technology cycle - WITHOUT automation / robot Fgjds Aiv A Ispfx Ab Iei

Condition: used, Year of construction: 2020, turning diameter 480 mm turning length 1.225 mm control SLIMline Operate Siemens greates pass round over bed 700 mm Swing dia. over traverse guideway 370 mm Max. rpm 3.250 min/-1 power capacity - main spindel 33 / 22 kW max. Torque 630 / 420 Nm spindle diameter in front bearing 150 mm max. bar capacity 102 mm chucking diameter 315 mm spindle nose A2-8 number of toolpositions 12 pos. tool taper VDI 40 driven statition 12 pos Spindle speed - driven tool stations max. 4.000 min -1 power capacity - driven tool-stations 5,44 kW max. Torque 20 Nm number of toolpositions 6 pos. tool taper BT tailstock travel 1.200 mm taper of center MK 5 tension force 12 kN Fgjdo Aiv Dhopfx Ab Ioi x-axis 307,5 mm y-axis +/- 60 mm z-axis 1.240 mm rapid traverse X: 30 m/min rapid traverse Y: 22,5 m/min rapid traverse Z: 30 m/min total power requirement 60 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 5,5 x 3,5 x 2,1 m CNC - Turning- and Millingcenter DMG MORI - CLX 550 V4 - from a business closure - extensive accessory package - fully equipped - only approx. 895 spindle hours - only approx. 4,901 power-on hours - chip removal package - "Alternating Speed" technology cycle - extensive accessory package

Condition: ready for operation (used), Year of construction: 2000, operating hours: 89,307 h, functionality: fully functional, machine/vehicle number: 01180001051, For sale is a powerful and reliable Gildemeister CTX 500E CNC universal lathe in good condition. Thanks to its stable inclined bed design, the machine offers maximum rigidity and excellent precision when machining medium to large workpieces. The machine can be inspected while powered on, by arrangement. Equipment: - Heidenhain control - Single spindle - Three-jaw chuck - 11-position tool turret (partially with driven tools) - Automatic tailstock Fsdpe Afph Nofx Ab Iegi - Chip conveyor Accessories: - Workbench (4 drawers, 1 door) - Telescopic drawer cabinet Contents: Hand tools, analog/digital measuring instruments Attractive offer – flexible & hassle-free We offer you not only a high-quality product, but also tailored financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: excellent (used), Year of construction: 2023, Great opportunity to purchase this high-end CNC turning machine with driven tools, Y-axis and counter-spindle. This machine was built in 2022, but installed and first used in February 2023. Only 1545 actual operating hours on the counter. Including: Subspindle and Y-axis Built-in Motor Turret with 12 tool stations Chip conveyor Manual in-machine tool presetter (pivoting type) Manual in-machine tool presetter (removable type) (Spindle 2) Standard Workpiece Unloader (Built-ln Type) Coolant system with increased pressure of 5 bar Fgjdpfx Abj Aigt Re Ioi Full technnical specifications available in the attached document. Optional: set of tooling and tool holders (availability is to be discussed) This machine is in very good condition and can be inspected in operation in Belgium. Immediately available for delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), For sale: 4 Mazak machines – 1 milling machine and 3 lathes, all in working condition. Must be sold due to lack of space. 1 FJV 25 2 Qturn 8 1 Qturn 6 with robot Total price: €14,000. Fgedpfx Abo Agpy He Ioi

Condition: good (used), Year of construction: 2007, CNC turning machine, manufactured by INDEX, model G200C-4, year of construction 2007. Control system: Siemens / INDEX, with bar feed system Hydrobar up to 42 mm. Maximum turning diameter: 200 mm. Turning length: 445 mm. Fedj Aiczbepfx Ab Isgi Bar passage: 42 mm. Equipped with collet chuck, tailstock, chip conveyor. Machine documentation available. Further data can be found in the data sheets.

Condition: excellent (used), Year of construction: 2011, operating hours: 7,541 h, functionality: fully functional, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 2,067 mm, total length: 5,671 mm, total width: 2,721 mm, overall weight: 8,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, SALES EXCLUSIVELY WITHIN EU COUNTRIES. DIRECT SALES TO END USERS ONLY. Main spindle: 25kW, 5000 rpm, SMW Autoblock chuck diameter 250mm, bar diameter 65mm. Counter spindle: ISM52, 20kW, 6000 rpm, SMW Autoblock chuck diameter 210mm. Turning/milling spindle (B-axis): HSK63A, 18000 rpm, external/internal high-pressure coolant 20 Bar. Direct axis measurement. Tool magazine for 24 tools. Chip conveyor, extraction system with filtration. Various HSK63A tool holders are included in the delivery. Fgjdpfx Asz Dpm Nob Isi W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Fgsde Aa Imyopfx Ab Isi Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: used, Year of construction: 2012, Doosan Puma TT1800SY Twin Turret Multi Axis CNC Lathe (2012), 230mm Swing, 230mm Max Turned Diameter, 230mm Maximum Turning Length, 12 + 12 Station Turrets, 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y Axis, Coolant, Swarf Conveyor, Tool Setter, Parts Catcher, Hydrafeed Multifeed Magazine Bar-feed. S/No. ML0177-000555, Machine Weight: 9000kg. Country of Origin: Korea Fjdpfe Ah E Nnjx Ab Ijgi Location: This lot is located in Leicester, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Fsdpfxs Aa Ikrs Ab Isgi Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: ready for operation (used), Year of construction: 2003, CNC Milling Machine OPS Type OPS HSC 600 Year of manufacture 2003 Fgodpj Aa Ikxsfx Ab Ioi CNC control system Andronic 3D path control with Ethernet interface Travel distances X/Y/Z 625/375/350 mm Tool changer based on Erowa system, 40 positions Spindle speeds 5000 – 40,000 rpm Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3500 kg Price: Euro 3,750.00 (plus VAT), ex works