Used Graphite for sale (193)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Stadum
1,136 km
Tipper semitrailer
GRANULA55m³ Alu Kippauflieger / Alu-Chassi /Auch Miete!
Call
Condition: new, maximum load weight: 32,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,160 mm, loading space width: 2,460 mm, loading space height: 2,200 mm, loading space volume: 55 m³, Year of construction: 2025, Equipment: ABS, New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement!
Approx. 55 m³ Granalu aluminium tipping semi-trailer / combination tailgate / new vehicle / also available for rental!
---
* Manufacturer: Granalu
* Model: AERO – Grain Tipping Trailer
* First registration: - (New vehicle)
* Gross weight: 39,000 kg
* Unladen weight (manufacturer spec.): 6,100 kg
* Payload: 32,900 kg
* Axles: 3x Jost axles with first axle lift / off-road starting aid / disc brakes
* Suspension: Air suspension with raise and lower function
* Tyres: 385/65 R22.5
* Colour: Tipper body & tarpaulin RAL 7001 silver grey, chassis RAL 7016 anthracite/graphite grey
* EBS: Wabco
* Combination tailgate (swing & pendulum gates) with 2x grain discharge chutes
* 1x rotary bar lock per swing door
* Additional locks on the sides and below the rear wall
* Front wall sloped, 5 mm aluminium
* Side walls: 6 mm aluminium, tapering to 3 mm towards top rail
* Floor: 6 mm aluminium
* Aluminium chassis
* Aluminium landing legs
* Hyva tipping cylinder (max. 250 bar), high and low pressure
* Fifth wheel height: 1,200 mm (unladen)
* Sliding tarpaulin with central locking
* 4 crossmembers (3 pivotable)
* Operator platform at front with access on the left
* Internal front left access ladder
* Tarpaulin hooks
* Automatic lowering when tipping
* Water tank
* Toolbox
* Aluminium ladder
* Wheel chocks
* Shovel and broom holder
Lhsdow I I H Hjpfx Adtsb
* Acoustic reverse warning system
* 2x LED reversing lights
* 5-chamber LED rear lights
* Foldable underrun protection
* Single mudguards
New Vehicle – Immediately Available! For sale, rental, or lease with purchase option by arrangement!
Notice regarding potential errors in this advertisement:
Despite careful preparation, there may be occasional errors in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to confirm details or clarify any further questions.
Listing
Spittal an der Drau
1,711 km
Universal CNC tool milling machine
PRO RICHYOUNGPMU 50 CNC (FMU50 CNC)
Call
Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel
- CNC control SIEMENS 828D
- Motor for horizontal and vertical spindle
- Feed motors with inverter
- Ball screws for X/Y/Z axes
- Automatic 2-stage gear box for spindle speeds
- 1 long milling mandrel 27 mm
- 3 reducing sleeves (MK1, MK2, MK3)
- Pneumatic hydraulic clamping system for the vertical spindle
- Spindle protection with safety switch
- Protective cover in the work area with electrically secured doors
- Counterholder for horizontal milling
- LED work light
- Automatic central lubrication system
- Safety handwheels for X/Y/Z axes
- Coolant system with chip tray
- Guideway covers
- Base plates and adjusting screws
- Operating tools
- Technical documentation
- CE version
- Colors:
* RAL 7024 - Graphite gray
* RAL 7035 - Light gray
Technical data:
Fixed angle table:
- Dimensions of the work surface: 1,000 x 500 mm
- T-slots: Number / width x distance: 8 pieces / 14 x 63 mm
- Max. table load: 250 kg
Vertical table:
- Dimensions of the work surface: 1,200 x 250 mm
- T-slots: Number / width x distance: 3 pieces / 14 x 63 mm
Travel paths:
- Axis travel paths: automatic/manual
- Longitudinal (X): 600 mm
- Transverse (Y): 500 mm
Ledpfxevupa Ro Adtohb
- Vertical (Z): 400 mm
Feed rates:
- Control: stepless
- Range (X,Y,Z): 0 – 2,000 mm/min.
- Rapid traverse - X,Y,Z axes: 5,000 mm/min.
- Rapid traverse - Z axis: 4,000 mm/min.
Horizontal spindle:
- Tool holder: DIN 2080 / ISO 40
- Speed range (2 levels): 0 – 3,200 rpm.
Vertical milling head:
- Tool holder: DIN 69871 / / ISO 40
- Speed range (2 levels automatic): 0 – 3,200 rpm
- Head swivel: +- 90°
- Distance spindle nose/angle table: min/max.: 70 – 470 mm
- Distance spindle center to column: min./max.: 160 / 660 mm
Motors:
Main drive power: 7.00 kW
Feed motor power X-Y-Z: 2.85 KW
Dimensions and weight
Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm
Weight: 1,950 kg
Listing
Spittal an der Drau
1,711 km
Tool room milling machine
PRO RICHYOUNGPMU 40 (FMU 40)
Call
Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA
- Milling head +- 90° manually swiveling
- Manual tool clamping using M 16 tightening screw
for vertical and horizontal spindle
- Swiveling control panel
- Motor for horizontal and vertical spindle
- Feed motors with inverter for X/Y/Z axis
- Ball screw spindles in the X/Y/Z axes
- Gearbox for 12 spindle speeds
- Counterholder with support bearing
- 1 long milling mandrel 27 mm
- 3 reducing sleeves (MK1, MK2, MK3)
- Spindle protection with safety switch
- Splash protection on the 3 sides of the horizontal table
- LED work light
- Automatic lubrication for X/Y/Z guides
- Mechanical handwheels for X/Y/Z axes
- Coolant system
- Cover for X/Z axes
- Operating tool
- Technical Documentation
- CE version
Colors:
- RAL 7024 – graphite gray
- RAL 7035 – light gray
Technical data:
Fixed angle table:
- Dimensions of the work surface: 845 x 390 mm
- T-slots: number / width x distance: 5 pcs. / 14 x 63 mm
- Max. table load: 250 kg
Vertical table:
- Dimensions of the work surface: 950 x 250 mm
- T-slots: number / width x distance: 3 pcs. / 14 x 63 mm
Lhodpfxovt Tn Ae Adtsb
Travel paths:
- Axis travel paths: automatic/manual
- Longitudinal (X): 420 mm
- Transverse (Y): 220 mm
- Vertical (Z): 380 mm
Vertical milling head:
- Tool holder: ISO 40 / DIN 2080
- Speed range: 65 - 2,600 rpm.
- Number of spindle speeds: 12
(65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600)
- Quill stroke, manual: 100 mm
- Head swivel: +- 90°
- Distance spindle nose/table: 90 - 470 mm
- Distance spindle center to column - min./max.: 120 - 340 mm
Horizontal spindle:
- Tool holder: ISO 40 / DIN 2080
- Gear stages: 12
- Speed range: 65 - 2,600 rpm.
- Distance spindle center / table: 100 - 480 mm
Feeds:
- Control: stepless
- Range (X,Y,Z): 0 - 1,000 mm/min.
- Rapid traverse (X,Y,Z axes): 1,000 mm/min.
Motors:
- Main drive power: 2.2 kW
- Feed motor power (X-Y-Z): 0.35 kW
- Coolant pump: 0.09 kW
Dimensions and weight
- Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm
- Weight: 1,300 kg

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Spittal an der Drau
1,711 km
Tool room milling machine
PRO RICHYOUNGPMU 50 (FMU 50)
Call
Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA
- Milling head +- 90° manually swiveling
- Manual tool clamping using M 16 tightening screw
for vertical and horizontal spindle
- Swiveling control panel
- Motor for horizontal and vertical spindle
- Feed motors with inverter for X/Y/Z axis
- Ball screw spindles in the X/Y/Z axes
- Gearbox for 18 spindle speeds
- Counterholder with support bearing
- 1 long milling mandrel 27 mm
- 3 reducing sleeves (MK1, MK2, MK3)
- Spindle protection with safety switch
- Splash protection on the 3 sides of the horizontal table
- LED work light
- Automatic lubrication for X/Y/Z guides
- Mechanical handwheels for X/Y/Z axes
- Coolant system
- Cover for X/Z axes
- Operating tool
- Technical Documentation
- CE version
Colors:
- RAL 7024 – graphite gray
- RAL 7035 – light gray
Technical data:
Fixed angle table:
- Dimensions of the work surface: 1,000 x 540 mm
- T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm
- Max. table load: 300 kg
Vertical table:
- Dimensions of the work surface: 1,200 x 250 mm
- T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm
Travel paths:
- Axis travel paths: automatic/manual
- Longitudinal (X): 600 mm
- Transverse (Y): 500 mm
- Vertical (Z): 400 mm
Vertical milling head:
- Tool holder: ISO 40 / DIN 2080
- Speed range: 40 - 3,200 rpm.
- Number of spindle speeds: 18
(40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330
520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200)
- Quill stroke, manual: 100 mm
- Head swivel: +- 90°
- Distance spindle nose/table: 70 - 470 mm
- Distance spindle center to column - min./max.: 160 / 660 mm
Horizontal spindle:
- Tool holder: ISO 40 / DIN 2080
- Gear stages: 18
- Speed range: 40 - 3,200 rpm.
- Distance from spindle center / to 2nd T-slot: 95 - 495 mm
Lsdpfxsvunrfe Adtohb
- Distance from spindle center / to 3rd T-slot: 180 - 580 mm
Feeds:
- Control: stepless
- Range (X,Y,Z): 0 - 600 mm/min.
- Rapid traverse (X,Y,Z axes): 600 mm/min.
Motors:
- Main drive power: 3.75 kW
- Feed motor power (X-Y-Z): 0.35 kW
- Coolant pump: 0.09 kW
Dimensions and weight
- Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm
- Weight: 1,600 kg
Listing
Sankt Pölten
1,767 km
Complete sawmill (stationary)
EstererEBB-1400
Call
Condition: excellent (used), Band sawmill consisting of:
- Tension carriage EWD EW 1000
- Band saw EWD EBB 1400
Ledpfx Adevtwzmetohb
- Roller conveyor for transporting the sawn goods (manufacturer SPRINGER)
- Raised cabin
- Tracks
- Control cabinets
- Accessories
Optionally with complete sharpening room equipment:
- Sharpening machine Vollmer CAL 200
- Upsetting machine Vollmer PMH
- Flanking (leveling) machine Vollmer EMS
Log band saw EWD Esterer EBB1400
Vertical band saw for round wood
Roll diameter: 1400 mm
Roll width: 200 mm
Saw blade width: 206 mm
Saw blade thickness max. 1.47 mm
Blade speed max. 55 m/s (winter & summer drive pulley available)
Main motor: 55 kW
The roller crowning was reground in 2009
Band saw carriage EWD Esterer EW1000
hydraulic tensioning carriage
Year of manufacture 1991
4 tensioning blocks
with 3 log turners
tensioning block opening max. 1000 mm
hook opening max. 930 mm
total length: 6000 mm
total width: 2450 mm
total height: 1750 mm
track width 1300 mm
The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw.
The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment
Sharpening room equipment:
01. Vollmer CAL 200 sharpening machine
Year of manufacture 2000
Tooth feed from the left
CNC machine for grinding cutting and
block band saw blades with straight grinding and wet grinding
Full enclosure with extraction
for CBN and corundum grinding wheels
Incl. 2 Borazon grinding wheels 10mm
02. Vollmer PMH upsetting machine
Saw upsetting machine for band saw blades
Max. blade thickness 3.5 mm
03. Vollmer EMS flank/leveling machine
Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping!
Further details:
The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage.
Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered.
All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box.
In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again!
immediately available - fully functional - very good condition
Location: Austria, near St. Pölten
Listing
Hauzenberg
1,616 km
Laser cutting machine
LD-LaserLG-3015 12kW
Call
Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: cabin, documentation/manual, New 12 kW Fiber Laser Cutting Machine
Our goal is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as first-class service.
- Includes on-site commissioning and training at your facility (approx. 1 week)
- Price includes freight to your facility
- Machine with automatic shuttle table
- Machine bed lined with graphite plates
- Machine measured and calibrated with Renishaw system (including measurement protocol)
- Very space-saving design
- Extremely energy-efficient cutting system
- Only approx. 8.5 x 3.5 meters required installation footprint
- 12 kW laser source from MaxPhotonics (G5/German specification)
- Top quality – schedule a viewing now!
Cutting capabilities:
- Steel sheets up to 35 mm
- Stainless steel sheets up to 20 mm
- Aluminum sheets up to 20 mm
- Travel range: 1500 x 3000 mm
- Machine controller in German
- Safety light curtain for maximum operator protection
- Extensive collision protection measures for the cutting head
- Large laser safety windows on three sides for monitoring the cutting process
- Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen)
- Comprehensive cutting parameter library
- Includes nesting module
- Very easy to operate
- Powerful laser chiller
- Machine controller in German
- Extensive service and warranty
- Powerful laser chiller
- Optional filter extraction system
Lhedpfjxg Dn Ajx Adtob
Sale exclusively to commercial customers.
Delivery, consultation, and sales only within Germany / Austria / Switzerland.
Approximate machine dimensions:
Length: 8.5 m
Height: 2.3 m
Width: 3.5 m
Total weight: approx. 5500 kg
Need a different laser power, table style, or table size? No problem. I will gladly provide a suitable quotation.
For example:
2 kW machine from €29,990
6 kW machine from €79,900
Not sure which laser power is suitable for your application? Just call! Of course, I can perform cutting tests according to your requirements. There is a wide range of possibilities.
Auction
Auction ended
Bayern
1,562 km
Vertical machining centers + robot
MikronHSM 600 U + 400 U + Robot
Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder!
The lot consists of 2x 5-axis HSC machining centers and pallet system with robot
MIKRON HSM 600 U (serial number: 217.88.00.070)
TECHNICAL DETAILS
Travel
X-axis travel: 800 mm
Y-axis travel: 600 mm
Z-axis travel: 500 mm
Spindle
Spindle speed: 42,000 rpm
Tool holder: HSK 40
Axes
B-axis swivel range: +30° / –110°
C-axis rotation range: 360°
C-Axis
Combination rotary table range: n x 360°
Rotational speed: 360 rpm (2,160°/s)
Torque (nominal): 340 Nm
Torque (max.): 217 Nm max.
Clamping torque: 1,400 Nm
B-Axis
Swivel range: +30° / –110°
Swivel speed: 200 rpm (1,200°/s)
Swivel torque: 640 Nm
Clamping torque: 2,800 Nm
Clamping surface: 320 x 320 mm
Table load capacity: max. 120 kg
Tool magazine: 68 stations
Control: Heidenhain iTNC 530
Workpiece weight: max. 120 kg
EQUIPMENT
Rotary tilting table with Erowa UCP
MIKRON HSM 400 U (serial number: 217.87.00.178)
TECHNICAL DETAILS
Travel
X-axis travel: 400 mm
Y-axis travel: 240 mm
Z-axis travel: 350 mm
Spindle
Spindle speed: 42,000 rpm
Tool holder: HSK 40
Axes
B-axis swivel range: ±110°
C-axis rotation range: 360°
C-Axis
Combination rotary table range: n x 360°
Rotational speed: 250 rpm (1,500°/s)
Torque (nominal): 132 Nm
Torque (max.): 217 Nm max.
Clamping torque: 500 Nm
B-Axis
Swivel range: ±110°
Swivel speed: 165 rpm (990°/s)
Swivel torque (nominal): 485 Nm
Swivel torque (max.): 686 Nm max.
Clamping torque: 2,000 Nm
Clamping surface: ITS 148 Powerchuck
Table load capacity: max. 25 kg
Tool magazine: 36 stations
Control: Heidenhain iTNC 530
EQUIPMENT
Rotary tilting table
EROWA ROBOT MULTI TWIN
Gripper station: 6 stations
Grippers: various
Storage system
Rotary storage: 5 levels
Ledpfex Hx T Aex Adtohb
Level allocation
Level 1: 5 x UCP 300 x 300 mm
Level 2: 5 x UCP 300 x 300 mm
Level 3: 15 x ITS 148
Level 4: 15 x ITS 148
Level 5: 30 x ITS 50
GENERAL EQUIPMENT
Absolute measuring systems on all axes
Infrared touch probe
LASER
Electronic handwheel for setup mode
Graphite dust extraction 2x BURN WK 5806
Rotary pallet storage
Listing
United Kingdom
381 km
Full protected laser cutting machine
BodorP Series
Call
Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine
Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands.
Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved.
The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting.
Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter.
The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value.
With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing.
Lhedpfehwaapex Adtob
Condition: New
Laser Type: Fiber Laser
Laser Power: 1500W - 30000W
Cutting Area: 3048*1524mm - 6100*2500mm
Cutting Speed: 0-169m/min
Positioning accuracy: ±0.03mm - ±0.05mm
Repositioning accuracy: ±0.02mm - ±0.03mm
Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT
CNC or Not: Yes
Cooling Mode: WATER COOLING
Listing
Rodgau
1,238 km
Edge sanding machine
Rehnen Maschinenbauhoku KS 150 (Junior R1)
Call
Condition: used, Year of construction: 2024, New demonstration machine! List price: €4,938 net. The upper section is a heavy-duty cast iron design with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm. The machine is equipped with an integrated switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Dimensions of the sanding belt backing: 850 x 150 mm. The steel work table height is adjustable via spring tension. Belt dimensions: 150 x 2280 mm. The sanding belt backing is covered with a graphite slip lining. The machine is supplied with an assortment of sanding belts; also included in the scope of delivery are an angle and miter gauge. When connected to a central extraction system, the machine is dust-tested (GS) by Holz-BG Stuttgart for an airspeed of at least 20 m/s. Standard equipment includes: - tiltable 90-180°, - motorized belt oscillation, - small support table at the deflection roller, - pneumatic belt tensioning. Technical data: Motor power: 2.2 kW. Sanding belt size: 150 x 2280 mm. Sanding belt speed: 22 m/s. Table size: 750 x 350 mm. Space requirement: 1000 x 800 mm. Weight: from 180 kg. Extraction connection Ø: 100 mm. Storage location: Rieth.
Lodpfox Hwpvox Adtehb
Listing
Ceggia
1,727 km
Tufo electrical discharge machining (EDM)
AGIE CHARMILLESFORM P 600
Call
Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, table width: 750 mm, type of input current: three-phase, table length: 600 mm, table height: 1,000 mm, workpiece length (max.): 730 mm, workpiece width (max.): 1,040 mm, workpiece height (max.): 410 mm, feed length X-axis: 600 mm, feed length Z-axis: 450 mm, feed rate Y-axis: 6 m/min, feed rate Z-axis: 10 m/min, year of last overhaul: 2021, tank capacity: 700 l, input current: 80 A, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, Equipment: documentation/manual, AgieCharmilles Form P600 Sinker EDM Series
Features:
- Compact, rigid mechanical design
- Glass linear scales: lifetime precision
- Thermostability
- Accura C Axis: the highest performance axis on the market
- Maximum ergonomics
- Fastest graphite machining technology
- Rapid polishing of deep 3D cavities
- High autonomy and reduced downtime
- Increased autonomy with minimal manual intervention
Main Specifications
Travel (X, Y, Z): 600 x 400 x 450 mm
Machine dimensions (W x D x H): 2265 x 2110 x 2780 mm
Total weight without dielectric: 4800 kg
Workpiece and Electrode
Workpiece dimensions (L x W x H): 1040 x 730 x 410 mm
Maximum electrode weight: 50 kg
Maximum workpiece weight: 1600 kg
Tank level: 100 – 450 mm
Dielectric Unit
Capacity: 700 L
Lodpfx Aex Srr Ajdtjhb
Number of filter elements: 6
Generator Type: ISPG Integrated
Maximum machining current (option): 80 (140) A
Minimum surface roughness (Ra): 0.1 µm
Listing
Coesfeld
1,050 km
Vacuum tank truck
MANTGS 26.440 /6x2 / Wiedemann SUPER 1000 Recycler
Call
Condition: used, mileage: 235,530 km, power: 324 kW (440.52 HP), first registration: 04/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: green, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2011, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++
MAN TGS 28.440 6x2-2 BL Wiedemann SUPER 1000 - available upon request
Internal No. #515
Chassis
* MAN
* TGS 26.440
* 6x2-2 BL
* 440 HP / 324 kW
* EURO 5
* MAN transmission shifting
* N-drive NMV 221
* 4,200 + 1,350 mm wheelbase
* Parabolic front springs 9.5t
* Rear air suspension for high center of gravity
* 400 liter fuel tank + 60 liter AdBlue tank
* 385/55 R 22.5 STEER-AXLE TL 160&K
* 315/70 R 22.5 DRIVE-AXLE TL 154/150&K
* 385/55 R 22.5 STEER-AXLE TL 160&K
* Chassis color RAL 9011 graphite black
* Halogen beacon lights
* “M” cab, 2,240 mm wide, 1,880 mm long
* Air conditioning
* Reversing camera
Superstructure
* Wiedemann enviro tec
* Super 1000 8.0/4.0 water recycling
* 12,000 liter tank capacity
* 4,000 liter clean water chamber
* 8,000 liter waste water chamber
* Discharge by tipping the tank, 45°
Vacuum system
* Wiedemann & Reichhardt KW 3000
* 3,000 cbm/h 80 kW
* Piping DN 150
* Approx. 25 m suction hose DN 125
* Suction tube DN 125
High-pressure system
* Uraca P 3-45 407 liters / at 175 bar
* High-pressure hose reel for approx. 180 m DN 32 with automatic retraction
* Hydraulic flushing hose reel with approx. 60 m DN 13
Features
* Sludge tank made from material 1.4301
* Suction and HP (high pressure) boom
* Hot hand-washing unit
* Stainless steel toolbox
* Operator cabinet with display
* NMV - start controllable from operator cabinet
* Remote control
* Equipment cabinet with flaps
* Hose storage
* Extended sound insulation for pump compartment
* LED work lights
Technical data
* Unladen weight 18,080 kg
* GVW 28,000 kg
* Length 10,900 mm
* Height 3,650 mm
* Width 2,550 mm
For further detailed information and/or photos, please contact us directly.
A wide range of other vehicles for SALE or RENT can be found at:
Lodowu Syxspfx Adtjhb
Specifications subject to change, prior sale, and errors excepted. The buyer is obliged to independently verify the condition and features of the goods. Sale is exclusively under our terms and conditions and with exclusion of any warranty.
Listing
Coesfeld
1,050 km
Vacuum tank truck
MANTGS 28.470 6x2 Wiedemann Super 2000, Recycler
Call
Condition: used, mileage: 21,000 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++
Internal number: #129
MAN TGS 28.470 6x2-2 BL Wiedemann SUPER 2000 – available upon request
Chassis
* MAN
* TGS 28.470
* 6x2-2 BL
* 4
* 470 HP/346 kW
* EURO 6
* Engine D2676LF52
* MAN Tronic transmission control MAN Comfort Shift ZF 16 S 252 OD
Lodpfx Adovh H Hhjtshb
* N-drive NMV 221 f=0.98 /drive flange 150 mm for NMV 8-hole
* 3,900 + 1,350 mm wheelbase
* Front suspension: parabolic 9.5t
* Rear suspension: air for high center of gravity
* 400-liter fuel tank + 60-liter AdBlue tank
* 385/55 R 22.5 STEER-AXLE TL 160&K
* 315/70 R 22.5 DRIVE-AXLE TL 154/150&K
* 385/55 R 22.5 STEER-AXLE TL 160&K
* Chassis color RAL 9011 graphite black
* Cab color RAL 2004 deep orange
* Halogen beacons
* “M” cab 2,240 mm wide 1,880 mm long
* Air conditioning
* MAN Media Navigation Package / video function via USB/SD / 7” color display / MAN Camera View / AUX-in / USB / Comfort hands-free for 2 mobile phones
Body
* Wiedemann enviro tec
* Super 2000 8.0/6.0 water recycling
* 14,000-liter tank
* 6,000 liters fresh water
* 8,000 liters waste water
* Discharge by tilting the tank 45°
Vacuum System
* Wiedemann & Reichhardt KW 3000
* 3,000cbm/h 80kW
* Piping galvanized, DN 150
* Approx. 25m suction hose DN 125
* Suction pipe DN 125 with channel spatula
* Silencer
High-Pressure System
* Uraca P3-45 65, 406 liters at 175 bar
* Hydraulic high-pressure hose reel with approx. 180m HP hose DN 32 with automatic rewind
* Hydraulic high-pressure hose reel with approx. 80m HP hose DN 13 with automatic rewind
Additional fresh water system
* Speck NP 25/50-150, 50 l/min at 150 bar
* Spring-loaded reel with 15m pressure hose DN10
Special features
* Sludge tank made of material 1.4301
* Suction and HP boom
* 20-liter hand washing unit (heated)
* Stainless steel toolbox
* Control cabinet with display
* Engine – start can be controlled from control cabinet
* NMV – start can be controlled from control cabinet
* Radio remote control with display
* Equipment cabinet with two flaps – access on both sides
* Hose tray
* High sound insulation of pump compartment
* LED worklights
* Central lubrication system
Technical data
* Unladen weight 18,500 KG
* Permissible GVW 28,000 KG
* Length 10,400 mm
* Height 3,650 mm
* Width 2,550 mm
For further detailed information and/or photos, please contact us directly.
You will find a wide range of further vehicles available for PURCHASE or RENT on our website:
Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under exclusion of any warranty.
Listing
Coesfeld
1,050 km
Vacuum tank truck
VOLVOFL Electric mit BUCHER CityFlex C40e Kombination
Call
Condition: used, mileage: 3,500 km, power: 166 kW (225.70 HP), first registration: 06/2024, fuel type: electric, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2025, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2024, Equipment: ABS, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++
VOLVO FL Electric 4x2 BUCHER CityFlex C40e Vacuum and flush combi
Chassis
* Volvo
* FL Electric
* 4x2
* Fully electric chassis
* Battery 265 kWh (600V DC)
* Peak power up to 400 Kw
* Max. 850 Nm power take-off electrohydraulic
* Comfort cab
* Air suspension
* Chassis color RAL 9011 graphite black
* LED rotating beacons
* Air conditioning
* Reversing camera
Body
* BUCHER municipal
* CityFlex C40e
* 4,000 liter tank size
* Flexible division of sludge and water chamber volume by the piston
* Emptying by hydraulic discharge piston
Vacuum system
* CVS RSL 400
* 5,750 l/min. with free passage
* Pipeline in DN 80
* approx. 15 m suction hose cassette with boom
* Transport reel on the side for max. 40 m DN 80
High pressure system
* Uraca P 3-10 104 liters/ at 200 bar
* High-pressure reel with approx. 80 m DN 19 and 50 m DN 13 with manual reeling device
* Swiveling
* Digital hose length measuring device
Special features
* Sludge tank made of S265 material
* Suction hose boom
* Warm hand washing device
* Toolbox with roller shutters and shelves
* Control cabinet with display (IFM CAN)
* Remote control
* Equipment cabinet
* Hose storage
* LED work lights
* Vice
* Pylon holder
Technical data
* Unladen weight 11,205 KG
* 16,000 KG GGW
* Length 7,130 mm
* Height 3,000 mm
* Width 2,550 mm
For more detailed information and/or pictures, please contact us directly.
You can find a large selection of other vehicles to BUY or RENT under:
Lhjdjvh H Niopfx Adtob
Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.
The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles according to the list of eligible electric vehicles, available on the BAFA website.
The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles in accordance with the list of eligible electric vehicles available on the BAFA website.
The vehicle offered is eligible for the environmental bonus as financial support for buyers of electric vehicles in accordance with the list of eligible electric vehicles available on the BAFA website.
Listing
Schwanberg
1,820 km
Wide-belt sander
SCMSandya UNO RCS
Call
Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding
SCM
Model RCS
1st Unit: Calibration Roller, Steel
2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft)
Working width: 920 mm
Abrasive belt dimensions: 930 x 1,525 mm
Main motor power: 11.0 kW, 400 V, 50 Hz
Lhodpfjxqggcox Adtjb
Feed motor power: 0.37 kW, 400 V, 50 Hz
2 feed speeds
Electromotive table height adjustment
Main switch lockable
2 x emergency stop
Table extension with 2 rollers, front and rear
Sanding pad inserts fitted with new graphite cloth
Including as-new sanding belts
All documentation included
Note for used machinery:
• Specifications, data, and prior sale are subject to change.
• Prices stated are ex works – free loaded!
• The machine has been cleaned and functionality tested.
• All machines are sold as seen without any rights to warranty.
Buyers are welcome to inspect the machines on site.
• Special agreements are only valid in written form.
(We only respond to inquiries that include your address and telephone number!)
Listing
Schwanberg
1,820 km
Long belt sander
LANGZAUNERLZG
Call
Condition: excellent (used), Belt sander
LANGZAUNER
Type LZG
Sanding table dimensions approx.: 2500 x 800 mm
Sanding belt dimensions approx.: 6800 x 150 mm
Motor power approx. 3.0 kW, 400 V, 50 Hz
Motor protection switch
Manual table height adjustment
Right/left rotation of the sanding belt
Sanding belt cover on top
Light bar for the work area
CE
Lhedpfxjuxnyus Adtsb
Incl. special sanding pad
Incl. extraction fan
NEW GRAPHITE CLOTH
Note used machines:
- Subject to errors in technical specifications and prior sale.
- Prices quoted are ex location - free loading!
- The machines have been cleaned and functionally tested.
- All machines are purchased as seen without any warranty.
The buyer is free to inspect the machines on site.
- Special agreements are only possible in written form.
(Inquiries will only be answered with your address and telephone number).
Listing
Oppenau
1,271 km
Log semitrailer
DOLL3-Achs-Sattelauflieger LOGO 12
Call
Condition: new, maximum load weight: 33,570 kg, overall weight: 39,500 kg, axle configuration: 3 axles, loading space length: 12,450 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, DOLL 3-axle semi-trailer LOGO 12
* Front wall made of fine-grain steel sheet, designed in accordance with DIN EN 12642 Code L
* Welded steel chequered plate cover
* 3 single axles, SAF brand, 9 t Intradisc CD disc brakes
* 1st axle as lift axle
* Air suspension with lifting and lowering via rotary slide valve
* Manually operated landing gear
* 8 x DOLL Mammut bunks and stakes
* 385/65 R 22.5 tyres on steel rims
* LED tail lights with integrated triangular reflectors
* 4x LED work lights (1,800 lumens)
* RAL 9011 graphite black (frame + bunks), RAL 3002 carmine red (stakes)
* COC document
Ledpox Egtlefx Adtshb
Various bolt-on accessories such as toolbox, additional support leg, and access ladder are available at extra cost.
Further information available upon request.
Illustrations may differ from the original. Information provided without liability.
Contact:
Niclas Lott
Tel.:
Listing
Jelonek
1,678 km
Long belt sander
SCMMinimax Holzkraft LS 2500
Call
Condition: new, Year of construction: 2025, Professional long belt sanding machine
Ledpfx Adjwxrl Njtshb
Electric table height adjustment
Quick belt tensioning via lever
Upper belt with additional graphite coating
Professional sanding shoe
250 mm diameter rollers ensure optimal tracking
2 sanding belt speeds
Reversible motors (right and left rotation)
Tiltable sanding shoe adapts to the work surface
Fast and easy sanding belt replacement
Standard right-left rotation
Manufactured in Italy
Properly balanced rollers provide optimal belt drive
Quick belt tensioning allows for fast and effortless belt changes.
Technical data:
Working table dimensions: 2500 x 1100 mm
Working table height adjustment: 580 mm
Cross travel of working table: 620 mm
Sanding shoe dimensions: 150 x 360 mm
Belt speed: 9 m/s and 18 m/s
Motor power 400 V / 50 Hz / S6 - 40%: 4 kW
Table height adjustment motor power: 0.45 kW
Drive roller diameter: 250 mm
Sanding belt dimensions: 7100 x 150 mm
Overall dimensions (L x W x H) in mm: 4040 x 1510 x 1510 mm
Extraction port diameter: 140 mm
Weight: 420 kg
Listing
Berlin
1,444 km
CI flexographic printing machine
SomaOptima 2 / GEARLESS
Call
Condition: used, Year of construction: 2017, Technical data:
Number of printing units: 8
Maximum printing width: 1270 mm
Maximum web width: 1320 mm
Minimum web width: 300–570 mm (depending on unwind/rewind specification)
Minimum repeat length: 360 mm (ARUN system: from 380 mm)
Maximum repeat length: 800 mm
Repeat length adjustment: increments of 0.1 mm; correction ±2%
Anilox roller internal diameter: 136.989 mm
Anilox roller circumference: 500 mm
Sleeve length: 1350 mm
Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind)
Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc.
Corona treatment unit (Ahlbrandt)
Gas drying
Non-stop shafted unwind 1000 mm
Non-stop shafted rewind 1000 mm
Automatic viscosity control (INKSPEC)
Additional drying enhancements (ECLIPSE gas burners)
Lhodox H Unvopfx Adtob
Infeed/outfeed extensions
Automatic sleeve change systems
Central chiller for temperature stabilization (Hyperchill ICE039)
Ionisation system (SIMCO)
Side-lay control (Erhardt+Leimer)
EFFICIENCY
maximum mechanical speed: 500 m/min
FALCON – automatic print register and impression setting
Advanced print inspection system
FAST BLADE – integrated doctor blade quick-change system
INKSTORM – automatic wash-up system (optional feature)
Bosch Rexroth INDRAMAT direct-drive technology
JOB MANAGEMENT – remote job preparation from PC
PRINT QUALITY
CDTS – central cylinder thermal stabilization system
PCTS – thermal stabilization for anilox and plate cylinders
PPP – printing plate protection
DYNAMIC IMPRESSION – electronic compensation of inking unit impression forces
Machine design focused on high print stability with composite graphite sleeve
EASY OPERATION
Intuitive touch screen
Easy access to web path
Doctor blade chambers with FASTBLADE quick-change system
FASTADAPT – automatic chamber positioning adjustment
Listing
Berlin
1,444 km
CI flexographic printing press
SomaOptima / GEARLESS
Call
Condition: good (used), Year of construction: 2015, Number of printing decks 8
Max. print width 820 mm
Max. material width 850 mm
Min. material width 300 mm
Min. print length 260 mm if not specified otherwise for optional accessories
Air core diameter 76.510 mm
Repeat steel lock 310 mm
Max. print length 600 mm
OPERATION EFFICIENCY
Max. mechanic speed 300 m/min
FALCON - automatic setting of print registers and impressions
Sophisticated system for print control
FAST BLADE - system for doctor blade exchange in the machine
INKSTORM - automatic wash-up system (option)
Bosh Rexroth INDRAMAT direct drive technology
JOB MANAGEMENT - preparation of future jobs from remote PC
PRINT QUALITY
CDTS - central drum thermal stabilization system
DYNAMIC IMPRESSION - printing deck impression electronic compensation system
Machine design with emphasis on high printing stability
Lhsdpfxstuc R Hs Adteb
Composite graphite cores (option)
EASY OPERATION
Intuitive touch display (Touch Screen)
Easy access to web path
Doctor blade chambers with FAST BLADE system for blade quick exchange in the FASTBLADE machine
FASTADAPT - doctor blade chamber position automatic adaptation
CORONA, AHLBRANDT - 4 kW
Side control before printing
Printing unit
8-printing deck unit
Central drum with diameter of 1,450 mm
Gas dying system
Printed material cooling unit
Unit with cooling cylinder and servo drive
Web guiding system prior to the rewind unit
Web fault control system BST SUPER HANDY SCAN 4000 chip digital camera
Rewind unit
NONSTOP 800 rewind unit
For roll max. diameter of 800 mm
Roll clamping using pneumatic expansion shaft
Listing
Siedlce
2,045 km
Belt Grinding Machine
CORMAKSM150
Call
Condition: new, Year of construction: 2025, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt.
Machine features
Universal area of application for edges, surfaces and round grinding
Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage
Spring device ensures constant belt tension
Easy and quick belt replacement
Optimum grinding efficiency due to the high speed of the belt
Can be quickly adjusted to horizontal or inclined grinding
Lhedpfxjvu Uh To Adteb
Universal area of application in iron working shops and industrial areas
Large grinding surface with a protection guard
Equipped with an additional precise adjustment of the belt inclination angle
By default equipped with 2 belt speeds
Technical data
Wheel contact surface (H×W)
250×150 mm
Grinding belt dimensions (L×W)
2000×75 mm
Belt speed
14,5/29m/s
Motor power
3 kW
Weight
72 kg
Dimensions (L×W×H)
1070 x 560 x 980 mm
Warranty
12 months
Listing
Siedlce
2,045 km
Belt Grinding Machine
CORMAKSM75
Call
Condition: new, Year of construction: 2025, A universal belt grinding machine for rough grinding and metal buffing. Suitable for various shapes and materials. The machine is by default equipped with a suction connector for extraction. 75×2000 mm grinding belt, powerful 3 kW motor. SM 75 model is additionally equipped with 2 belt speeds: 14,5 and 29 m/s. 2 rubberised wheels ensure good grip of the grinding belt.
Lodpfx Adjvu Uhaetohb
Machine features
Universal area of application for edges, surfaces and round grinding
Graphite coating on the surface for grinding surfaces increases the grinding belt's slippage
Spring device ensures constant belt tension
Easy and quick belt replacement
Optimum grinding efficiency due to the high speed of the belt
Can be quickly adjusted to horizontal or inclined grinding
Universal area of application in iron working shops and industrial areas
Large grinding surface with a protection guard
Equipped with an additional precise adjustment of the belt inclination angle
By default equipped with 2 belt speeds
Technical data
Wheel contact surface (H×W)
250×150 mm
Grinding belt dimensions (L×W)
2000×75 mm
Belt speed
14,5/29m/s
Motor power
3 kW
Weight
72 kg
Dimensions (L×W×H)
1070 x 560 x 980 mm
Warranty
12 months
Trust Seal
Dealers certified through Machineseeker

Listing
Siedlce
2,045 km
Vertical/Horizontal Belt and Disc Sander
CORMAKBDS 6x9
Call
Condition: new, Year of construction: 2025, This sander is a machine designed for smaller carpentry workshops. Small dimensions allow for very high mobility of the machine. Movable table, graphite guide ensures constant speed and smooth belt movement, machine bed made of gray cast iron, linear gauge for precise grinding at an angle, high stability thanks to a solid base, discharge device.
Lhjdpevugrkefx Adteb
Technical data:
Belt size [mm] 1220 x 150
Disc size [mm] 225
Work table size [mm] 310 x 190
Max. grinding length [mm] 590
Diameter of the suction nozzle [mm] 60
Grinding at an angle [º] 0º -45º
Belt speed [m/s] 5.5
Disc speed [m/s] 23
Total engine power [W] 750
Weight [kg] 54
Warranty [months] 12
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing
Gelsenkirchen
1,058 km
Hydraulic press
MecamaqDoppelständerpresse DM100R-5393
Call
Condition: as good as new (ex-display), Year of construction: 2023, Technical data PDM100R-5393
Capacity [Tm] 100
DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600
DIMENSIONS OF TOP PLATE [mm] 850x550
GUIDING COLUMNS (x4) [Ø mm] 50
WORKING HEIGHT [mm] 950
MAX. OPENING [mm] 600
STROKE [mm] 420
FREE RUNNING SPEED [mm/s] 50-230
WORKING SPEED [mm/s] 2-15
WEIGHT [kg] 3000
SERVO POWER - PDM100R
The new SERVO hydraulic units from Bosch
Rexroth are designed to increase productivity and reduce
productivity and reduce energy consumption by up to 80
during downtime, tool changes and between cycles.
cycles.
Increased efficiency in operation!
EQUIPMENT
- Proportional p/Q control with SvP5020 from
Bosch Rexroth
- Adjustable speed values on PLC.
- AOPD light barrier technology
- 12" LCD display
Ledpfx Adsq Ula Retehb
- Configurable working parameters on PLC.
- 50 pre-stored programs available on PLC.
- Prefilled valves for fast speeds
- Maintenance-free bronze graphite bushes.
- Simplified hydraulic unit to reduce maintenance
maintenance work.
Listing
Mühlenbecker Land
1,441 km
Edge sanding machine
HolzkraftKSO 1500
Call
Condition: used, Year of construction: 2018, operating hours: 0 h, functionality: fully functional, machine/vehicle number: A031154, For sale is a robust and versatile edge sanding machine, Holzkraft KSO 1500, ideal for professional woodworking sanding applications. The machine excels with its tilting sanding unit, oscillating sanding belt, and an extensive range of standard features to ensure top sanding quality.
Lodpjx E Uh Tjfx Adtehb
Features & Functions
- Tilting sanding unit 0–90°
For vertical and horizontal sanding tasks, including locking positions at 0° / 22.5° / 45° / 67.5° / 90°
- Oscillating sanding belt
For improved sanding quality and extended belt life
- Quick-clamping system
Enables fast and easy belt replacement
- Sanding pad with graphite coating
Reduces friction and increases sanding belt lifespan
- Height-adjustable cast iron worktable
With T-slot, spring-assisted for smooth adjustment
- Lateral sanding drum device
For sanding curves and radii
- Continuously adjustable mitre fence
- Two extraction ports Ø 100 mm
Listing
Neckartailfingen
1,333 km
Briquetting press Briquetting press aluminum
mütekMPP NEM 90
Call
Condition: reconditioned (used), Year of construction: 2023, All wear parts new
only 704 operating hours
Special price for a low-hour demonstration unit
Base machine: €29,990 net
Optional extras (for an additional charge):
- Cooling unit: €3,995 net
- Emulsion tray: €3,990 net
The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%.
Throughput capacity: maximum 70 kg/h (depending on material)
Briquette diameter: Ø 50 mm
Motor: 5.5 kW
400 Volt / 50 Hz / 3-phase
Lodod N Dnhopfx Adtjhb
Pump: 40 liters
Maximum briquette length: 50 mm
Optimal briquette length: 40 mm
Silo diameter: 1,000 mm
Oil tank: 110 liters
Dimensions: 1750 x 1130 x 1100 mm (L x W x H)
Weight: 950 kg
Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder
Fill level sensor: yes
Feed material requirements:
- Max. chip length: 15 mm
- Installation room temperature: heated space, at least +5°C
- Max. load on agitator: 150 kg
- Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.
We make it easier for you to find: "graphite"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Graphite (193)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month








































































































































































































