Used Grain Mill for sale (771)

Condition: used, maximum load weight: 27,570 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2005, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,570 mm, loading space volume: 83 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 86 cbm, Cargo Floor with 21 planks 8 mm, double-wing rear door with rotary bar lock, cable remote control, grain hopper at the rear, access steps and standing platform at the front of the body, sliding tarp, electric power pack for end unloading possible either hydraulically or via 380V, ABS, EBS, SAF INTRA axle(s), lift axle, disc brake system, landing gears, air suspension with raise/lower function, 1x storage box. Vehicle may have advertising stickers and/or lettering applied. Gsdpsxtd Hxjfx Ahzekd Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may have advertising stickers and/or lettering applied. Our general terms and conditions of delivery and payment apply. We are pleased to offer you financing or leasing options for this unit. Please contact us for further information!

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Gkodpfexu Ea Aex Ahzjd

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Gkodpoxgrdfofx Ahzjd With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, axle configuration: 3 axles, first registration: 02/2021, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,675 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower chord for particularly high stability and strength, unit chassis made of aluminum, 140 mm frame height! (max. 39 tons) Axles and suspension: 22.5-ton disc brakes Jost axle assemblies, 3 x 9-ton with DC air suspension, ken, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with traction control (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice on Alcoa aluminum rims, satin, 11.75x22.5 ET120 Seatposts Aluminum drop-lift supports, Alu Leg, with 2x10-ton drawbar load; we use swivel feet for the air suspension Braking system according to E.G. Standard, dual-line braking system, Wabco EBS system with RSS (Roll Stability Support) system, spring-loaded braking system acting on two axles with rear controls, aluminum air chamber system, premium modulator Electrical system Compliant with the German Road Traffic Licensing Regulations (STVZO) guidelines with two Aspöck Europoint III LED five-chamber lights integrated into the aluminum rear end, 24-volt system with one 15-pin and two 7-pin sockets, with LED side marker lights, two separate LED work lights at the rear, and two LED work lights on the sides. At the height of the seat posts, 1 LED work light inside, front left, can be operated from the outside. Gkjdpfxsxuy I Ie Ahzod Body/Trough "Fully welded body" Front wall load 17,250 kgf/cm², rear and side walls 10,250/13,400 kgf/cm², aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper chords, plank profiles fully welded inside, floor as a moving floor system on 140 mm aluminum cross members, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profiles, 2-3 mm thick, straight design, special aluminum corner profiles, smooth rear wall, straight design, with two aluminum wing doors, 50/30 mm thick, with 4 espagnolette locks in the welded-in design. Aluminum rear frame mounted on Teflon bearings and stainless steel bearings, a sliding aluminum wall suspended from the reinforced aluminum top chord with a Kevlar tarpaulin for complete emptying, side brush seals and an additional Kevlar tarpaulin, an integrated grain hopper with a cover plate, operable from the outside with a viewing window at the rear left, and two test slides in the rear doors. "Cargo Floor" 24-Board Hydraulic System Moving floor system in the floor with hydraulically operated aluminum profiles mounted on square aluminum profiles with approximately 880 PE-HD sliders, approximately 6 mm smooth floor, hydraulics with approximately 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves of a size and design to be specified, operating pressure 190 - max. 240 bar, aluminum End pieces welded into the floor, rear left control with remote control in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber mud flaps, aluminum spare tire holder, folding aluminum side bumpers, 1 plastic toolbox approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, 680 g/m² roll-up tarpaulin with a roll-up tarpaulin system including a

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 3,800 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x2, wheelbase 3700 mm • Fifth wheel plate with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all chassis modifications necessary for crane installation, dismantling and reinstallation of attachments, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and superstructure works are carried out in compliance with the bodybuilder guidelines of the respective chassis manufacturer and performed to the highest quality standards. • Complete assembly of a custom-designed, in-house manufactured special subframe made of fine-grained steel for the crane and body. The fully welded and chassis-frame bolted subframe guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. Execution is of the highest quality and painted in chassis color. • Mounting/bolting the crane and main outrigger beam to the subframe, installation of all hydraulic and electrical connections. Mounting position: front • Drop-side platform body made of steel/welded structure, removable Godpfxsxvv E Eo Ahzokd • Approx. length 380 cm, width approx. 248 cm • Platform body painted in RAL shade (chassis color) • Removable aluminum drop sides, brand Suer, height 600 mm, anodized finish with steps, Kinngripp stakes removable • Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis color) • 6 retractable lashing points, 2500 daN each per side, in slotted profile with flexible arrangement • 4 x chain lashing holders 6500 daN (2 front, 2 rear of the body) • Robust front wall consisting of welded frame, welded 4 mm steel sheet and 5 accessory hooks, approx. front wall height 1300 mm, steel painted, with 2 folding lashing eyelets for tension belts, welded on • Covering panels, mudguards from aluminum chequer plate (sandblasted, powder-coated and painted) RAL tones to be specified. • 2x toolboxes BROSSBOX, made of aluminum chequer plate (sandblasted, powder-coated, and painted), RAL tones to be specified, size and arrangement depend on wheelbase and space available • 1x BROSSBOX toolbox, between crane and front wall • Multifix stake pockets, 2 rows (as agreed), spaced approx. 80 cm from front and rear wall • Brackets (for outrigger pads, crane plates) made from galvanized steel • Additional stabilizer mounted underneath the chassis • Installation of underrun protection at the rear and the additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections, front for semi-trailer as well as rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed, configured and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional Equipment and Crane Accessories: • 5 x crane outrigger pads with brackets, layout as per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual and crane inspection book Lighting: • 2 x integrated LED-AS in the front wall • 2 x rotating beacons on FH roof • 2 x strobe lights in the engine hood • 2 x LED underbody lights at the rear, left and right, arrangement to be agreed • 4 x LED-AS, 2 left and 2 right under the superstructure in the B

Condition: used, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 04/1999, next inspection (TÜV): 10/2025, loading space length: 8,250 mm, KUMMLIN 3-way tipper GRAIN / Agriculture Year of manufacture: 1999 * BPW axles * Tyres approx. 50-60% * 2nd axle liftable * Side board height: 80 cm Gksdpfxexulwze Ahzod * Payload: 17,650 kg * DuoMatic air connection

Condition: used, maximum load weight: 29,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2008, next inspection (TÜV): 01/2026, loading space length: 10,480 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Aluminum box-shaped trough approx. 50 cbm, aluminum chassis, fifth wheel height loaded 1225 mm, combination door at the rear, double-wing door with rotary bar lock/pendulum flap, pneumatic rear wall lock, 1 x grain slider with cover, grain funnel, "EDBRO" tipping ram, roll tarpaulin, aluminum drop supports, ABS, EBS, MERCEDES-BENZ axle(s), disc brake system, ALCOA aluminum rims, air suspension with lifting/lowering device, lift axle, 1x storage box, vehicle can be labeled and/or decorated with advertising. Our offer is generally without a new TÜV approval. If a new TÜV approval is desired, we will be happy to provide you with an offer from our partner workshops! Vehicle can be labeled and/or decorated with advertising. Our general terms and conditions of delivery and payment apply. We are happy to prepare a financing or leasing offer for this item. Please contact us! Gkedpoxtd Hljfx Ahzed

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Gkedpsxupt Tefx Ahzod

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit Gkjdoxgtqmepfx Ahzod • compressor.

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay and bread. Throughput depends heavily on the sieve and source material: - up to a maximum of 350 kg / h for straw with a 15 mm sieve - up to 60 kg / h for EPS with a 15 mm sieve Gkedpfx Aozbizohzsd Motor 11 KW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Surcharge for the next larger machine with 18.5 kW and larger silo diameter + 1,995 € net stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optional (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optional for plastic or Grain pipes, Blowing width approx. 12 m, Chassis with 2 wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Cover €290 each net Styrofoam disc: €600 each net

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 3,800 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x2, wheelbase 3700 mm • Fifth wheel plate with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all chassis modifications necessary for crane installation, dismantling and reinstallation of attachments, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and superstructure works are carried out in compliance with the bodybuilder guidelines of the respective chassis manufacturer and performed to the highest quality standards. • Complete assembly of a custom-designed, in-house manufactured special subframe made of fine-grained steel for the crane and body. The fully welded and chassis-frame bolted subframe guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. Execution is of the highest quality and painted in chassis color. • Mounting/bolting the crane and main outrigger beam to the subframe, installation of all hydraulic and electrical connections. Mounting position: front • Drop-side platform body made of steel/welded structure, removable • Approx. length 380 cm, width approx. 248 cm • Platform body painted in RAL shade (chassis color) • Removable aluminum drop sides, brand Suer, height 600 mm, anodized finish with steps, Kinngripp stakes removable • Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis color) • 6 retractable lashing points, 2500 daN each per side, in slotted profile with flexible arrangement • 4 x chain lashing holders 6500 daN (2 front, 2 rear of the body) • Robust front wall consisting of welded frame, welded 4 mm steel sheet and 5 accessory hooks, approx. front wall height 1300 mm, steel painted, with 2 folding lashing eyelets for tension belts, welded on • Covering panels, mudguards from aluminum chequer plate (sandblasted, powder-coated and painted) RAL tones to be specified. • 2x toolboxes BROSSBOX, made of aluminum chequer plate (sandblasted, powder-coated, and painted), RAL tones to be specified, size and arrangement depend on wheelbase and space available • 1x BROSSBOX toolbox, between crane and front wall • Multifix stake pockets, 2 rows (as agreed), spaced approx. 80 cm from front and rear wall • Brackets (for outrigger pads, crane plates) made from galvanized steel • Additional stabilizer mounted underneath the chassis • Installation of underrun protection at the rear and the additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections, front for semi-trailer as well as rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed, configured and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Gkodpfxoxvv Exs Ahzed Additional Equipment and Crane Accessories: • 5 x crane outrigger pads with brackets, layout as per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual and crane inspection book Lighting: • 2 x integrated LED-AS in the front wall • 2 x rotating beacons on FH roof • 2 x strobe lights in the engine hood • 2 x LED underbody lights at the rear, left and right, arrangement to be agreed • 4 x LED-AS, 2 left and 2 right under the superstructure in the B

Condition: new, The R 32 Basic is a robust radial drilling machine ideal for those entering the world of Radial Drilling Machines, offering an exceptional drilling capacity of 32 mm (1.26 in) and a throat depth ranging from 320 to 820 mm. This model, part of the renowned R Basic series, features manually switched gears and manual clamps, ensuring ease of use while maintaining a stable and reliable performance suitable for various applications, including workshops and steel construction. Built from high-quality fine-grain cast iron with heavy ribbing, the machine minimizes vibrations, enhancing operational precision with its precision-ground gears. It includes a standard cube table for handling smaller workpieces, making the R 32 Basic a powerful addition to your workshop. Equipped with features such as motorized arm height adjustment and mechanical clamping for important components, this radial drilling machine is designed for your operational needs. Buy now to experience the efficiency of the R 32 Basic, a standout in the Radial Drilling Machines product group. Gsdju E Hzkjpfx Ahzjkd

Condition: used, maximum load weight: 27,585 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2015, loading space length: 9,500 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,820 mm, Equipment: ABS, Aluminum box body approx. 51 cbm, double-wing door with espagnolette lock at the rear, grain slide with cover, roll-up tarpaulin, HYVA tipping ram, loading pressure gauge, aluminum "LT" support legs, ABS, EBS, MERCEDES-BENZ axle(s), aluminum rims, disc brake system, air suspension with lifting and lowering device, lift axle, 2 x reversing lights, vehicle can be covered with advertising and/or labeled Gkedpfxov E T U Ts Ahzod Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Gsdpfx Aoxghvkshzekd

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Godpfsxgtgnjx Ahzokd With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: new, Year of construction: 2024, Consisting of a bale shredder for large bales, type MHB and a straw shredder, type MHZ 1) Bale shredder MHB: Special price starting at €29,975 net (production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (VFD) - this controls the speed of the scraper floor. The bales are placed on the scraper floor and the cutter's feed is activated. The cutter's tines tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale shredder and straw shredder is recommended. Technical specifications for bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill and the power of the straw mill. Without the straw mill, the bale shredder can shred straw up to a maximum of 900 kg per hour) Maximum square bale size: 2400x1200x800 mm (LxWxH) Rotary cutter motor: 5.5 kW, 380 volts Scraper floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (LxWxH) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; Available immediately Special price from €7,995 net Special hopper: + €970 (only in conjunction with bale shredder) Surcharge for the even larger straw shredder (18.5 kW) + €3,940 net Technical specifications, MHZ with special hopper: Motor: 15 kW 380 volt electric motor Gsdpfx Ahjb Nulhozekd Diameter: 600 mm Hardened cutting blades Sieve with replaceable inserts Optional (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, Ue protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing width: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options For an additional charge: Intake auger + €970 net Cyclone (mounted by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter €1,750 net --- Further options: Industrial extraction system (demonstration) + from €9,950 net Optional with rotary valve *depresses the material + €5,750 net Control system: from €1,620 net Special shredder extension 3 m *other dimensions must be calculated + €9,750 net Briquetting press MPP 180 S; Little-used demonstrator 70 mm briquettes - up to a maximum of 100 kg/h from €39,700 net * larger machines available upon request --- Description: The muetek bale shredder was developed for shredding round and square bales of hay and straw. The shredder flanged to the bale shredder shreds straw from all types of grain, hay, corn, and miscanthus. The muetek machines of the MHZ/MHB series are characterized by their robust design and solid construction. muetek bale shredders of the MHB series are equipped with a chain conveyor onto which the straw bale is placed using the front loader. The support is adjustable depending on the bale type. The chain conveyor presses the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The straw separated from the bale is ejected. --- The machines generally work for dry raw materials: - Straw - Hay --- Hemp shredding only works with a special shredder. Surcharge: approx. €9,720 net * depending on the model. Hemp shredding does not work with the straw mill. Requirements for the raw material: Maximum moisture content 12%

Condition: new, mileage: 400 km, power: 397 kW (539.77 HP), overall weight: 56,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH540 Chassis with Wiese Body and Fassi Loader Crane Volvo FH540 10x4 Removable Flatbed with F1150RA.2.28 & Fly Jib as well as Winch and Work Basket ----Usage · For good roads, normal operating conditions · Long-distance transport · Predominantly flat terrain · Ambient temperature up to +40°C, for more than +40°C max. 25 hrs/year · Ambient temperature down to -25°C, below -25°C max. 25 hrs/year · Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame · Clean roads, max. 10% soiled · Flatbed chassis without preparations · Gross combination weight, technically: 80 t (observe towing capacity of the trailer hitch!) · Special-purpose vehicles · Vehicle for crane behind the cab · Mirrors for body width 2600 mm · New model · Chassis height: MED (medium), please refer to VBI/WIS for exact heights · Electro-hydraulically steered trailing axle, single tires · Rear air suspension, tridem, 2 driven axles · Globetrotter safety cab FH · Wheelbase 4,300 mm · Exhaust emissions according to Euro 6 Stage E, with SCR, particulate filter, and EGR · Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm · Volvo Engine Brake+ (VEB+). Braking capacity: 340 kW/462 hp (D13S) Gkedpfxsxl Ip Ij Ahzjd · Complies with ADR braking regulations. · I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm · Liftable axle · Drive axle RTH2610B. Double axle hub reduction. 4 planetary gears · Longitudinal and transverse differential locks · AA tires 315/80R22.5 · Drive axle ratio 3.33 : 1 · Fuel type: Diesel ---- Included in delivery: Base unit: F1150RA.2 xhe-dynamic Wiese platform body with side panels * Execution of all necessary chassis modifications for crane installation, removal and installation of components, exhaust system, tanks, etc. Adaptation of vehicle frame. For all chassis and body assembly work, the respective chassis manufacturer’s body mounting guidelines are strictly adhered to and implemented with the highest quality. Complete assembly of a specially designed and manufactured auxiliary subframe made of fine-grain steel, for crane and superstructure. The all-welded and bolted auxiliary subframe guarantees extreme torsional rigidity and perfect crane vehicle stability. A unique feature is the design of the subframe. The build is of the highest quality and painted in RAL chassis color. Mounting/bolting of the crane and main support carrier to the subframe. Installation of all hydraulic and electrical connections. Installation location: front * Flatbed design as steel/welded construction, REMOVABLE FLATBED, length approx. 4,800 mm x width x 2,480 mm, with hydraulic extension to 1,400 mm operable by remote control. Flatbed body in steel / sandblasted / painted in RAL chassis color. Removable aluminum side panels, Suer brand, 600 mm high, anodized finish. Standard flatbed floor with welded steel checker plate, 4 mm painted. 2 rows of MultiSave locking system recessed and welded into the floor. 6 Thiele lashing rings (5,000 daN) recessed in the floor frame profile. 8 retractable lashing points per side (2,000 daN), flexible profile/arrangement. Stable bulkhead made of welded frame, welded 4 mm steel sheet and 5 accessory hooks, bulkhead height 1,300 mm, steel design / painted in RAL chassis color. Protective panels, mudguards, stainless steel (WIESE appearance). 4x 20' container locks on the front bulkhead (2x) in the extension.

Condition: used, empty load weight: 6,040 kg, maximum load weight: 32,960 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 11/2025, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, wheelbase: 7,780 mm, color: white, Year of construction: 2025, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69672 Reisch, Tipper Body 50m³ * Year of manufacture: 2025 * ABS, Anti-lock Braking System * Alloy wheels * Air suspension * Lift axle * New tarpaulin * Neutral tarpaulin * Air connection coupling head (red + yellow) * Connector plug 2x 7-pin * Connector plug 15-pin * Lifting and lowering device * Storage box / toolbox * Aluminum tipping body * Platform * Rolling tarpaulin * Grain chute * Combination doors * Suspension: air * Gross vehicle weight: 39,000 kg * Unladen weight: 6,040 kg * Payload: 32,960 kg * Perm. total weight: 39,000 kg * Axle manufacturer: SAF * Tyre condition axle 1: 100% -- 100% - Tyre size: 385/65 R22.5 * Tyre condition axle 2: 100% -- 100% - Tyre size: 385/65 R22.5 * Tyre condition axle 3: 100% -- 100% - Tyre size: 385/65 R22.5 * Wheelbase: 7,780 mm * Tyre sizes: 385/65 R22.5 * Reisch Alubox-R Gjdpfx Ahjxuz Ddjzjkd * Volume: 50 m³ * Combination door with 2 grain chutes * Continuously welded profiles * Rear trapezoidal wear plates * Steel access platform with dual-sided steps * Alcoa alloy rims * LED lighting by ASPÖCK * Broom & shovel holder incl. accessories * Side underrun protection with stainless steel cover * Tyre pressure monitoring system (TPMS) * Tyres 385/65 R22.5 Dunlop SP 247 * SAF INTRADISC CD Ø430 ET120 * Warranty * Aluminum drop-down legs * Aluminum air tank * Additional images and a detailed specification sheet available on request Disclaimer: Subject to alterations, prior sale, and errors. More photos and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Handling of all (export) documents * Ordering export / customs license plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. * Professional loading and load security * TÜV inspections, registration services * Transport of commercial vehicles Please contact our trained staff – we are happy to advise you.

Condition: used, maximum load weight: 29,160 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2007, loading space length: 9,700 mm, loading space width: 2,330 mm, loading space height: 2,000 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Aluminum rear tipping body, approx. 45 cubic meters, automatic-mechanical 4-hook locking system, 1 grain pusher, roll-over tarpaulin, aluminum drop legs, loading gauge, ABS, EBS, BPW EcoPlus axle(s), aluminum rims, disc brake system, air suspension with lifting/lowering device, lift axle, vehicle can be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us! Gjdpfx Ahoxrxmwozjkd

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overhead loading, central locking for side and rear sideboards, automatic rear wall opening when tipping backwards, side walls are swingable and foldable, side boards with spring relief, platform floor made from 4 mm fine-grain steel, 8 strong recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, infinitely height-adjustable drawbar, rear posts plug-in, gearbox support winch with load and fast gear, at the front, chassis-integrated chamber for two aluminium loading ramps, lockable ramp storage compartment (privacy cover), outline marking in accordance with ECE R 048 regulation, vehicle with day registration, rental price from €550. -- Subject to misprints, errors and changes. Sample images. More data at: !, More details: ! Gksdpfxsxt U Efe Ahzjd

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Gksdoxgtthepfx Ahzjd Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, Gjdpfx Aeh S H T Uohzskd optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 3,800 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x2, wheelbase 3700 mm • Fifth wheel plate with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all chassis modifications necessary for crane installation, dismantling and reinstallation of attachments, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and superstructure works are carried out in compliance with the bodybuilder guidelines of the respective chassis manufacturer and performed to the highest quality standards. • Complete assembly of a custom-designed, in-house manufactured special subframe made of fine-grained steel for the crane and body. The fully welded and chassis-frame bolted subframe guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. Execution is of the highest quality and painted in chassis color. • Mounting/bolting the crane and main outrigger beam to the subframe, installation of all hydraulic and electrical connections. Mounting position: front • Drop-side platform body made of steel/welded structure, removable • Approx. length 380 cm, width approx. 248 cm • Platform body painted in RAL shade (chassis color) • Removable aluminum drop sides, brand Suer, height 600 mm, anodized finish with steps, Kinngripp stakes removable • Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis color) • 6 retractable lashing points, 2500 daN each per side, in slotted profile with flexible arrangement • 4 x chain lashing holders 6500 daN (2 front, 2 rear of the body) • Robust front wall consisting of welded frame, welded 4 mm steel sheet and 5 accessory hooks, approx. front wall height 1300 mm, steel painted, with 2 folding lashing eyelets for tension belts, welded on • Covering panels, mudguards from aluminum chequer plate (sandblasted, powder-coated and painted) RAL tones to be specified. • 2x toolboxes BROSSBOX, made of aluminum chequer plate (sandblasted, powder-coated, and painted), RAL tones to be specified, size and arrangement depend on wheelbase and space available Gkedpoxfdpwjfx Ahzed • 1x BROSSBOX toolbox, between crane and front wall • Multifix stake pockets, 2 rows (as agreed), spaced approx. 80 cm from front and rear wall • Brackets (for outrigger pads, crane plates) made from galvanized steel • Additional stabilizer mounted underneath the chassis • Installation of underrun protection at the rear and the additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections, front for semi-trailer as well as rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed, configured and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional Equipment and Crane Accessories: • 5 x crane outrigger pads with brackets, layout as per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual and crane inspection book Lighting: • 2 x integrated LED-AS in the front wall • 2 x rotating beacons on FH roof • 2 x strobe lights in the engine hood • 2 x LED underbody lights at the rear, left and right, arrangement to be agreed • 4 x LED-AS, 2 left and 2 right under the superstructure in the B

Condition: used, Year of construction: 2018, Overview  This brewhouse was manufactured in 2018 by Slovenian company SKRLJ d.o.o. The BH-3 brewhouse has a batch capacity of 20 hL and is designed as a semi-automatic system with steam heating. It includes all main process vessels and a wide range of accessories, making it suitable for medium-sized breweries. The system is currently available. Technical data Capacity: 20 hL per batch Hot water tank: 4,586 L, steam heating jacket Cold water tank: 4,400 L, glycol cooling jacket Heating: Steam Control: Semi-automatic with PLC Scope of Delivery  Brewhouse | SKRLJ d.o.o. | BH-3 | 2018 | 20 hL, semi-automatic, steam-heated Hot water tank | SKRLJ d.o.o. | – | 2018 | 4,586 L, steam heating jacket Cold water tank | SKRLJ d.o.o. | – | 2018 | 4,400 L, glycol cooling jacket Grist bin | SKRLJ d.o.o. | – | 2018 | 500 kg capacity 2-stage heat exchanger | SKRLJ d.o.o. | – | 2018 | Stainless steel Accessories: wort aeration system, spent grain remover, grist hydrator, CIP sprayballs, temperature probes, steam jacket solenoids, 2 sanitary centrifugal pumps, electronic flow meter, manual cold/hot water mixer with thermometer, PLC for pump/recipe/temperature control   Gjdpfx Ahexcng Ijzokd

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW 2025 MODEL • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm • Fifth-wheel coupling with sliding device and self-lubricating (Type Jost JSK), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all necessary chassis modifications for crane installation, removal and reinstallation of ancillary components, exhaust system, tanks, etc. Adaptation of the vehicle frame • All chassis and bodywork modifications are carried out in strict accordance with the bodybuilder guidelines of the respective chassis manufacturer, ensuring the highest quality • Complete installation of a special auxiliary frame developed in-house and manufactured from fine-grain steel for crane and body, welded and bolted to the chassis frame, ensuring extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the auxiliary frame, finished to the highest quality and painted in frame colour • Mounting/bolting of the crane and main stabilizer support to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front • Flatbed constructed as a removable steel/welded structure • Approx. length: 380 cm, width: approx. 248 cm • Flatbed body painted in RAL chassis colour • Removable aluminium sideboards by Suer, 600 mm high, anodized finish with steps, removable "Kinngripp" posts • Standard flatbed floor with welded 4 mm steel checker plate, painted in RAL chassis colour • 6 flush, retractable lashing rings rated at 2500 daN per side, adjustable in slotted profile • 4 chain lashing points rated for 6500 daN (2 front, 2 rear on the body) • Solid front wall consisting of welded frame with 4 mm welded steel plate and 5 accessory hooks, approx. 1300 mm high, painted steel design, with 2 welded folding lashing eyes for load securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted) – please specify RAL colours • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted) – please specify RAL colours, size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, 2 rows (as agreed), spaced approx. 80 cm from the front wall and rear • Holders (for support pads, crane pads) made of galvanized steel • Additional stabilizer fitted under chassis • Installation of underrun protection at the rear and additional stabilizer, with installation of hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semitrailers and also at the rear for trailers New Crane, Type FASSI F545 RA 2.27, continuous rotation, completely assembled, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Gkodpfx Ajxvv Elohzsd Additional equipment & crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection log Lighting: • 2 LED-AS integrated into the front wall • 2 revolving beacons on FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, one left and one right, arrangement by agreement • 4 LED-AS, two left and two right