Universal Milling Machine

MAHO MH 500

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Iijdpfx Ajzd N T Eja Isc Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Iodpfx Aasxtnn Tj Ijic Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible. Iiedpfxozc Rd Re Aa Ijc

Condition: excellent (used), Year of construction: 1993, x-travel 500 mm y-travel 380 mm z-travel 350 mm tool taper ISO 40 spindle turning speed range 63.0 - 4000 U/min feeds 10 - 1000 mm/min quill stroke 50.0 mm table-size 800 x 360 mm table load ca. 250 kg T-slots 14H7 - 5/63 mm rapid traverse X-axis 1.5 m/min rapid traverse Z-axis 1.5 m/min rapid traverse Y-axis 1.0 m/min Control DIGI "VRZ 650" Number of working hours 810 h voltage 380 V control voltage 110 V engine output 8.0 kW weight 1850 kg dimensions of the machine ca. 1880 x 1796 x 1840 mm from a training center very little run (!!) operating hours approx. 810 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm Ijdpezbc Dgsfx Aa Isic - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * Automatic tool clamping with clamping/pull bar - Robust work table incl. T-slots ... 800 x 390 mm * Number/size of T-slots 5 pieces 14H7 * Distance between T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: used, Pallet with 18H7 T-slots, suitable for DMG DMC 100 H and DMG DMC 100 U as well as DMC 125H/U Duoblock. Iisdsqx Uh Nspfx Aa Ioc More than 10 pallets available.

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Iodpfx Aaou T Navj Ioic Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. With counter bearing for horizontal milling. Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm Iiodpfx Asich Ehsa Iec feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Machine documentation available Machine is ready for demonstration.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 025137, Offer 24190 Technical specifications: - Drilling capacity: 25 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 140 mm - 8 spindle speeds: 100 - 2900 rpm - Min./max. distance spindle/table: 110 / 405 mm - Work light - Quick-action drill chuck - Coolant device - Machine vice - Machine base - Drive: 400 V / 0.75 kW - Required space (W x H x D): 400 x 1250 x 600 mm - Weight approx.: 200 kg Iisdpfx Aaowyl H No Ijc

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Control MAHO 432 Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Isdpfx Aaor Igv Rs Ieic Machine in good condition from tool shop. Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Machine documentation available, machine can be demonstrated under power.

Condition: used, Year of construction: 1992, functionality: fully functional, workpiece weight (max.): 250 kg, Universal milling machine in good condition with overhauled milling head/spindle head. Maintenance including new drive belts was recently carried out. Tool holder is SK40. For technical data, see the attached data sheet or documents. Iisdpfsy Ivqhsx Aa Ioc

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm Ijdpeirax Usfx Aa Ioic -Weight: 1500kg

Condition: reconditioned (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 380 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, quill stroke: 50 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 63 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 4 m/min, table length: 360 mm, table width: 800 mm, overall weight: 1,600 kg, table load: 200 kg, year of last overhaul: 2026, workpiece weight (max.): 200 kg, power: 5 kW (6.80 HP), Dear Sir or Madam, For sale is a universal milling machine of the type Maho MH500M, which particularly stands out due to its extremely simple and comfortable operation. For example, all feed rates can be continuously adjusted via potentiometer. The machine has undergone extensive partial overhaul in our workshop, so it is in excellent technical and optical condition. All guideways are in order, the gearboxes run quietly, and the levers shift smoothly. Availability: on request X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 350 mm Main spindle speed range: 63 - 4,000 rpm Gear stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table type: Fixed Clamping surface: 800 x 360 mm T-slots: 14H7 - 5 / 63 Max. table load: 200 kg Feed speed: 1 - 2,000 mm/min Rapid traverse (X/Y/Z): 4 / 2 / 4 m/min Total power requirement: 5 kW Machine weight: approx. 1.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Additional equipment and accessories: coolant device, work light, electrical documentation, foot pedal for tool clamping (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can fully or partially overhaul the selected machine - Upon request, we can repaint the machine in your preferred color Ijdpfx Aornnf Nsa Isic - Upon request, you can order further accessories such as tools, etc., directly - Upon request, we can install further accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation on site

Condition: used, Year of construction: 1984, functionality: fully functional, Technical Data: Working Area X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Working Spindle with rotary table Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 rpm, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Fixed table: 700 x 350 mm, 5 T-slots Iedsyzy Azjpfx Aa Ioic Fixed table: max. load 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Equipment: - CNC control - Fixed table - Milling head swivels +/- 90° - Hydraulic clamping device - Coolant system - Emergency stop push button

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min Iiedpsg Trvrefx Aa Iec 170 mm 125 mm 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Year of construction: 1988, condition: good (used), For sale is a milling machine of the company Maho and the type 500 W Iedpfx Ajittrlsa Ieic The machine is in good condition and fully functional Year of manufacture: 1988 Heidenhain TNC 232 travels X- 500 mm, Y- 380 mm, Z-350 mm spindle mounting ISO 40 quill stroke vertical 50 mm spindle speed 20-4000 rpm, infinitely variable feed range 1-3000 mm/min rapid traverse 5 m/min table load 250 kg total power requirement 11,3 kW Machine weight approx. 2 t All prices plus VAT machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website