Used Grading Sieve for sale (1,088)

Condition: new, Year of construction: 2025, Stock Offer GC1 / GC2 Cartonboard Stock Available – Mixed Formats, Ready to Ship Sheets & Reels Immediate Availability, Folding Boxboard Various Sizes & GSM We are offering immediately available cartonboard stock (GC1 / GC2) in sheet and reel formats, suitable for folding cartons, packaging, sleeves, and general converting. The lots include top quality and downgraded/remarked material (e.g., water spots, creases, coating variations, uncoated edges, damaged pallets), enabling significant cost savings depending on your end-use and print requirements. Grades: GC2 (Cream back) + GC1 (White back / Optimus Top) Products include: Excellent Top, Excellent Top Strong, Excellent Top Pure, Freeze Grease III, Optimus Top, etc. Formats: Sheets + selected reels Grammage range: approx. 215 – 450 gsm Pedpfx Aaex H Tm Do Eerf Sizes: Multiple sheet sizes and widths (mm) as per the attached stock list Quantities: Listed per lot in kg (many lots available, including high-volume lots) Typical Applications Folding cartons (food / pharma / cosmetics – depending on defect tolerance) Packaging sleeves and inserts POS / display packaging General boxboard converting and lamination

Year of construction: 2022, condition: new, For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 € superstructure: 1 piece Hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the back wall 2 pieces of flushing connections into the rotating part of the mill. Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed At the bottom in the middle an outlet with a corresponding connection flange. Motor 400/680 Volt; IP 54 Podpfspz H D Iex Aa Eorf 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. screens of your choice 3 pieces rotors The rotor is also in V2A design, (beater with 96 plates) rotor can be rotated by 180 the beater plates can be turned 1 time. be turned. For this purpose, we recommend balancing after turning. 1 piece Feeding screw for hammer mill with gear motor with 1,2 kW Screw equipped with two cleaning balls on hinged lid lid is equipped with lid switch and tumbler feeding hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for stepless speed control speed indicator beater

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M Prjdpfx Aswg Axvea Eof -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: used, machine/vehicle number: BT1813052302, Hommel Rotormat 1000 bread shredder ? Product description ? Manufacturer: Hommel Maschinen- und Apparatebau ? Type: Rotormat 1000 Universal shredder, for grinding fresh or dry bread, breadcrumbs, fruits, nuts, Kä shredder is with 3 kW machine is offered 2 sieve inserts further sieve inserts can be purchased separately. -crushing of bread -380 volt / 50 Hz Predpsuk Ebljfx Aa Ejf -3 kW motor -stainless steel casing -146 / 65 / 90 cm (H/W/D) Dimensions (H x W x D) See pictures for details.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, DMG MORI DMG MORI LASERTEC 30 SLM (2nd Gen.) Metal 3D Printer 600–1000 W Fiber Laser For sale is a DMG MORI LASERTEC 30 SLM 2nd Generation, a professional industrial system designed for metal 3D printing using the Selective Laser Melting (SLM) process. This machine is ideal for highly precise functional components, prototypes, lightweight structures, and small-batch production in industry, aerospace, medical technology, and toolmaking. The system has been professionally operated and maintained, and is in excellent condition. Machine Specifications: Model: LASERTEC 30 SLM 2nd Gen. Year of manufacture: 2019 Weight: approx. 1300 kg Dimensions: approx. 1900 × 1100 × 2000 mm Build volume: 300 × 300 × 300 mm Layer thickness: 20–100 µm Laser type: Ytterbium fiber laser Laser power: 600–1000 W Materials: Stainless steel, tool steel, titanium, aluminum, CoCr, Inconel, etc. Control: CELOS Touch-Screen Electrical Data: Supply: 400 V ±10 %, 50/60 Hz Power consumption: 17.3 kVA Max. current draw: 25 A Recommended circuit protection: 25–32 A DC control voltage: 24 V AC control voltage: 400 V Shielding Gas Supply: Gas: Argon 4.6+ Minimum consumption (flooding): 1000 L Average consumption: 72 L/h Gas pressure: 6–8 bar Connection: W21.80 × 1/14" Cooling System (HYDAC RFCS-G2-002600): Refrigerant: R134a Cooling capacity: 2.2 kW Pump capacity: 15 l/min at 3 bar Pedpfx Aajx Ei Sms Ejrf Dimensions: 871 × 610 × 639 mm Weight: approx. 80 kg Fire Extinguishing System: Automatic LIFDESTM system Activation temperature from 110 °C Optical & acoustic alarm (95 dB) Important Note: "The table shown in the photos is not included in the sale." Condition: used The system was fully operational until dismantling, clean, well-maintained, and is in excellent technical and optical condition. Scope of delivery: (see picture) - DMG MORI LASERTEC 30 SLM machine - HYDAC industrial cooler - DMG MORI SmartKey USB dongle - Comprehensive documentation (several folders) - Integrated powder sieving machine - Filter element - Accessories as pictured (Subject to technical changes and errors in specifications!) For further questions, please do not hesitate to contact us by phone.

Condition: used, Year of construction: 2017, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, - Details: - └ Description: Excluding magnet - Year: 2017 - Documentation available: No - CE certificate present: No - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 Pjdpfx Ajx Dik Rea Eorf - Number of shafts [pcs.]: 1 - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Power: 1 kW (2 HP) Manufacturer : AZO Model: E450 B1 Pedpfx Aasx Ar E Us Eorf Type : Rotary sieve Application : Control and safety screening Stainless steel Motor power : 1,3 kW ATEX classification: Exe G1-3 Te 30 Capacity: max 6000 KG / H depending on screen size Documentation available

Condition: ready for operation (used), Screening machine KRUPP 21/55-2 Psdpjn Unkfsfx Aa Esrf Brand: Krupp Surface: 5500 x 2100 mm – 2 Decks Upper deck: sieve opening [] 35mm Lower deck: sieve opening [] 16 x 3mm Driving : 22 kW Incl.: springs and spring consoles In stock: 2 pieces

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. Psdpjd E R D Sefx Aa Esrf . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, The Glöckner K 225.5 circular cooler is particularly suitable for the animal feed, chemical and food industries. The round cooler has been completely overhauled. Dimensions: diameter 2,250mm; height 4,000mm. Throughput: approx. 2,500kg/h; inlet moisture: approx. 10%; bulk density: approx. 650kg/cbm; inlet temperature: 50 degrees; outlet temperature: ambient + 3 degrees; size of pellets: approx. 10mm The cooler consists of 5 cooling decks, with round lids and made of stainless steel. Inlet housing with adjustable baffles, mild steel housing, stainless steel baffles. Even product distribution through distributor rakes. Stainless steel on each sieve deck. Stainless steel baffle plates for optimum product guidance. Sieve segments made of stainless steel; perforation 3-5 mm. Material of the complete cooler made of mild steel, sandblasted, primed and painted. Psdpfx Aaetqt Ute Ejrf Direct drive by frequency-controlled gear motor, max. 0.55 kW. Non-contact door safety switch. One inductive proximity switch per deck to switch off in the event of overload. Sensor for monitoring the layer height. Drawing available. Control: Attached terminal box for wiring. Connection to on-site control system.

Condition: excellent (used), Year of construction: 2023, Schulz Schulz Electronic Power Test Cabinet with 8× Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023 For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. This system comes from a professional laboratory environment and is ideal for development, testing, burn-in, and automated test processes. Features & Functions: - 8 × independently usable laboratory power supplies SM330-AR-22 - Each unit offers precise voltage and current regulation - Sequence/automatic mode for complex test routines - Large control cabinet with: • Main switch • Start/Stop • Emergency stop • Side panels with optimal ventilation • Casters for easy transportation - Network labels present (e.g., CTSK05 #01 172.25.108.201) Technical Data: Control Cabinet (SE6607X-23BA0065-1): - Input: 400 VAC (three-phase) - Maximum current: 63 A - Total output: 8 × 3.3 kW = 26.4 kW - Protection rating: IP20 Power Supplies (Delta SM330-AR-22): - Output up to approx. 330 V / 22 A Podpfxjx Eb Hae Aa Esrf - High-resolution display - Fully programmable - Industrial grade – extremely reliable Condition: used The test cabinet is in very good condition. Displays are clear, controls clean, cabinet is solid. No visible damage. Scope of delivery: (see picture) - Complete Schulz Electronic test cabinet - 8 × Delta Elektronika SM330-AR-22 power supplies - Integrated control/operation section - Casters mounted (Technical specifications and details are subject to change and error!) If you have any further questions, we will gladly assist you by phone.

Condition: new, Spare parts for Doppstadt Rotaro for sale: - various sieve baskets - 2 pcs of afterpress units - flywheels - control cabinets with Schneider control - control cabinets with frequency inverter Pjdjx E T Dyopfx Aa Esrf

Condition: used, Manufacturer: ChauvinType: vibrating sieveNumber of separation stages: 1Screen diameter: Ø 650 mmMaterials in contact with the product: stainless steelScreens available (3 mm and 0.315 mm)Power supply: three-phase (240 or 400)Weight: 100 kg Psdpfsx Akakjx Aa Eorf

Condition: excellent (used), Year of construction: 2015, Various Stainless Steel Conveyors & Packing Stations Psdpfx Aotqdq Soa Eorf 1. Low level belt conveyor, Fully Stainless Steel, Belt Dimensions - 1000mm L x 400mm W, Height adjustable feet, Complete with motor. gearbox Stop / Start Isolator, Box alignment side guide 2. Incline Belt Conveyor, Stainless Steel Frame, Belt Dimensions 2500mm L x 400mm W. Infeed height 500mm, Outfeed height 1350mm 3. High Level Box Collation Conveyor, Gravity Roller Conveyor for Box Collation, Dimensions 2500mm L x 400mm W x 1400mm H, Height adjustable legs / feet 4. Packing Station Conveyor, All stainless steel, Two Packing tables - dimensions 760mm L x 400mm W each, Conveyor dimensions - 2000mm L x 400mm W, Height adjustable feet, Adjustable box aligner / guide 5. Driven Roller Conveyor Stainless Steel, Dimensions - 2200mm L x 400mm W rollers, With top box closer adjustable plate, 2200mm L, Fully stainless steel, Complete with motor, gearbox, Stop / Start Isolator. 6. Gravity Roller Flexi Conveyor, Closed Dimensions 960mm L x 300mm W, Fully open 3200mm L, Height adjustable legs 7. Stainless steel conveyor with a food grade flat belt, 4000mm L x 350mm wide belt 8. More conveyors - call us for details

Condition: good (used), Dirt traps, flanged dirt traps, filters, coarse or fine sieves, coarse filters, water filters -Manufacturer: AW Armaturen Wolff, Coarse filter, corner shape -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 Podjipwb Sspfx Aa Esrf -Sieve plate, mesh size: Ø 2mm, material: stainless steel -Dimensions: 700/50/H533 mm -Weight: 163 kg

Condition: used, These Scrape Surface Heat Exchangers can be used on various products for heating process such as Tomato pastes, custards, margarines, oils, mayonnaise, etc. We have fully refurbished these units by changing internal gaskets, rings, sand blasting , paint job, new stainless steel frame , new controls and motor test and service . Technical Details of VOTATOR - Make: A. Johnson & Co London - Year of Refurbishment: 2025 - Quantity: 5 units - Diameter: 6 inches - Metals: Grade 316 Stainless Steel - Usage: Horizontal Votators Specifications: - Chamber Dimensions:6" Diameter Stainless Steel Chamber - Length: 6' - 1 1/2" between end plates - Rotating Centre:4 3/4" Diameter Stainless Steel - Equipped with two PTFE scraper blades - Drive:11 kW Motor Drives - Speed: 1470 rpm (through a V-belt reduction) - Reducer:Giving a shaft speed of approximately 367 RPM. Availability: - Location: In stock - Available: Immediately General Capacity Estimation Formula: For a VOTATOR, the capacity can roughly be estimated using the following formula: [ \text{Capacity} = \text{Chamber Volume} \times \text{Turnover Rate} ] Step 1: Calculate the Chamber Volume The volume of a cylindrical chamber can be calculated as: [ V = \pi \times r^2 \times h ] Where: - ( r ) = radius (half of diameter in inches), - ( h ) = height (length of the chamber in inches). Given: - Diameter = 6 inches, so radius ( r = \frac{6}{2} = 3 ) inches. - Length ( h = 6 \text{ ft} = 72 \text{ inches} ). Calculating the volume: [ V = \pi \times (3)^2 \times 72 \approx \pi \times 9 \times 72 \approx 2036.75 \text{ cubic inches} ] To convert cubic inches to liters (since 1 cubic inch = 0.0163871 liters): [ V \approx 2036.75 \times 0.0163871 \approx 33.39 \text{ liters} ] Step 2: Estimate Turnover Rate The turnover rate depends on the speed of the VOTATOR and how many times the contents of the chamber can be processed. Given the shaft speed is approximately 367 RPM, you might assume a turnover rate of about 1 turnover per minute for a basic estimate. Final Capacity Estimate Assuming 1 turnover per minute: [ \text{Capacity} \approx 33.39 \text{ liters/min} ] Conclusion The estimated capacity of each VOTATOR is approximately 33.39 liters per minute Capacity Calculation: - Estimated Capacity: 33.39 liters/minute Convert to Liters per Hour: [ \text{Capacity per hour} = 33.39 , \text{liters/min} \times 60 , \text{min/hour} ] [ \text{Capacity per hour} \approx 2003.4 , \text{liters/hour} ] Predpfx Aaoxxg T Es Eef Conclusion The estimated capacity of each VOTATOR is approximately 2003.4 liters per hour.

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Komplett mit Förderband und Magnet - Year: 1991 Pedpfx Aasww T U No Eorf - Documentation available: No - CE certificate present: No - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1994, operating hours: 6,070 h, Drive: Wheel Serial number: 3PJ0xxxx Pjdpfxjxd Rdro Aa Eerf Please contact ATS Norway for more information Please provide reference number upon request: 21372 Specifications: 1994 model Hours: Approx. 6070, owner believes this is correct Tires (see pictures) Manual quick coupler Digging bucket Grading bucket Blade Service and maintenance done by owner Ready for delivery Description:CAT 212B Wheeled Excavator from 1994.Sold with 2 buckets.Owner says there is a noise when driving in one direction.Ready for delivery. Hours: 6070 Own weight: 1 Model: 212B Hjulgraver m/ 2 skuffer.

Condition: used, Manufacturer : Gericke Model : NBS 200/200 Type : Nibbler Year: – Power motor : 1,1 kW / 1500 RPM Sieve : Ø 5mm Predpfox Ai Sxox Aa Esf Atex : Ex II d IIC T4 Machine size : 60 x 85 x 125 cm Weight : 55kg

Condition: used, total length: 3,100 mm, total height: 1,550 mm, total width: 1,850 mm, Empty weight: 5.000 kg - Documentation available: No Prodpfx Aaswf U Aqo Ejf - CE certificate present: No - Main motor power [kW]: 30 - Rotation speed [rpm]: 1470 - Hydraulic unit power [kW]: 3.4 - Oil tank capacity [L]: 75 - Rotor width [mm]: 1150 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 2580 - Opening length [mm]: 2180 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 63 +/- - Transport dimensions: 3100mm x 1850mm x 1550mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, Serial number: CAT0320EANAZ0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20996 Specifications: 2015 model Hours: approx. 8,500 (can increase) Weight: 22,400 kg 112 kW Undercarriage (see photos) Track width: 60 cm Total width: 299 cm Central grease Pjdowzg Abopfx Aa Ejrf SMP quick coupler R6 Rototilt Grading bucket, 190 cm wide Digging bucket Trimble GPS Rear-view camera Tilt rotator beam Extra lights Radio/CD Climate control/AC Video attached Delivery by agreement Description:Well-maintained 2015 CAT 320 tracked excavator.The machine is in good condition and has 8,500 hours. It is in daily operation, so hours will increase.Sold with GPS, Rototilt, and 2 buckets.Delivery by agreement. Own weight: 22400 Model: 320EL Beltegraver m/ GPS, Rototilt og 2 skuffer.

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Empty weight: 1.300 kg Psdewu Uy Ijpfx Aa Eerf - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 7,450 h, Serial number: KMTPC250HHC00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 14437 Specifications: Model year: 2017 Weight: 23,800 kg Power: 123 kW Central lubrication system S70 quick coupler Undercarriage (see pictures) Track width: 60 cm Prsdsvgxq Aspfx Aa Eef Machine width: 300 cm Auxiliary hydraulics Refuelling pump GPS Rototilt Digging bucket Grading bucket Rear-view camera Rotating beacon Additional work lights Front LED light bar Radio/CD Climate control / AC Video system Service history available Ready for delivery Description:2017 Komatsu crawler excavator in good condition.Supplied with GPS, rototilt and two buckets.Full service history available and ready for delivery. Hours: 7450 Total Weight: 23800 Width: 300 Kw: 123

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Psdpfxjwh Naie Aa Eorf Yorick Diebels

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 Prjdpfxjwh Na Ns Aa Ejf - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels