Used Gomaco Gt 3600 for sale (1,659)

Condition: excellent (used), Urschel comitrol 3600 emulsifier Hfedpfx Agjuy Ttcogen

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Hfodpfx Aoz I A Ubsggon Equipped with Levelling feet Weight: approx 3 T

Condition: excellent (used), Year of construction: 2021, operating hours: 4,300 h, DOOSAN T3600D VERTICAL MACHINING CENTRE YEAR: 2021 CONTROL: FANUC i PLUS X TRAVERSE: 520.0mm Y TRAVERSE: 360.0mm Z TRAVERSE: 350.0mm MAX. SPINDLE SPEED: 12,000 rpm TAPER: BT30 X-Y RAPIDS: 48.0m/min Z RAPID: 56.0m/min MAX.CUTTING FEED RATE: 28.0m/min TABLE SIZE: 2 X 650 X 375.0 mm Hfodpfxoz R T D Us Aggon

Condition: good (used), Year of construction: 2012, Turning diameter: 168 mm Turning length: 145 mm Travel – x: 130 mm Travel – z: 110 mm Spindle speed: 45 – 6,000 rpm Rapid traverse X + Z axes: 18 / 24 m/min Rapid traverse X and Y axes: 24 m/min Equipment/Accessories: - CNC control FANUC 31i-TA - 2 x portal loading system - 2 x workpiece slides for inspected parts - 2 x 3-jaw chuck SMW Autoblok 6 inch, type BHM 165 - SMW Autoblok hydraulic cylinder type SIN-S 100 (left) - SMW Autoblok hydraulic cylinder type VNK 70/37 (right) - Chip conveyor (discharging to the rear of the machine) - Air-controlled workpiece positioning control (right) - Workpiece clamping monitoring (both sides) - 4-position spindle orientation (both sides) - Coolant injection in the chuck via Deublin rotary distributor (both sides) - Automatic coolant pump (tank capacity 200 l) - 2 x 8-station turret - Signal light (traffic light design) - Oil-mist extraction preparation - Automatic machine switch-off - Automatic central lubrication - RS232 C interface - External transformer Hfodpfx Agezt R U Aegon Tooling: - 10 x boring bars - 3 x turning tools (right) - 3 x turning tools (left) CNC functions: - Customer macro B - Turning cycles

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 4,500 h, gearing type: hydrostat, 1 meter wide, 1.9 meters high, 3.4 meters long + 1 grapple with a 1.1-meter reach and 1 bucket with a 1.1-meter reach. Hfjdpfjztnllex Aggjn

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Hedpfjifi D Tex Aggjfn Delivery: EXW Székesfehérvár

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Year of manufacture: 2005 Hfsdpfxszh Icyj Aggen

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, controller manufacturer: FANUC, controller model: i Series, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 650 × 375 mm • Spindle Power: 5.5 / 7.5 kW • Total Part Count (Pezzi Totali): 114,937 parts • Operating Time (Tempo Lav): 858 h 41 min 59 sec • Cutting Time (Tempo Taglio): 3,329 h 25 min 12 sec • Power On Time (Acceso): 13,604 h 41 min • Cycle Time (Tempo Cic): 0 h 1 min 59 sec • Documentation: Instruction manuals and CE declaration of conformity included Additional equipment • D'Andrea TRM/50 boring head attachment • Gerardi vise (345 × 120 mm) • Chip conveyor system Technical Specification Taper Size BT 40 Hfedjy Uwzbepfx Aggen

Condition: used, Year of construction: 2018, total height: 1,800 mm, total length: 1,750 mm, total width: 1,800 mm, Colour: Grey Empty weight: 975 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 173180025 - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 4 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hfedpfx Agsyf Hc Ijgon Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2014, condition: good (used), Machine details Manufacturer: CARTES Model: GT 363 HSD Year: 2014 Machine type: Label finishing / embellishment / converting machine Maximum material width: 360 mm Maximum print / working format: 340 x 320 mm Maximum speed: up to 15,000 cycles/hour Machine layout dimensions: approx. 8,288 mm length x 1,628 mm width/depth x 2,148 mm height Status: Machine is still in production until approx. the end of the year Reason for sale: Replacement by a faster machine _____ Configuration The machine is equipped with the following units: • Unwinder • Corona pretreatment • Flat hot foil stamping unit • 2 x transverse flat hot foil units • 1 x longitudinal foil guide • Foil unwinding 1” • Foil rewinding 3” • Flat screen printing unit • UV-Ray UV curing unit • Flat die-cutting unit • Matrix rewinding, 3” / 76 mm core • Edge trimming knives • Backside slitting / backside scoring • Razor blades for longitudinal slitting • 2 x rewinding shafts, 3” Hedpfx Aszkavdeggsfn _____ Accessories included • 2nd plate for hot foil stamping • 2 plates for embossing / relief stamping _____ Service and condition The machine is currently still in operation and is reported to be in good working condition. A technical service was carried out by a Dortschy technician in October 2024. FGT condition rating: 8/10 ★★★★★☆☆ This rating is based on the year of manufacture, the current production status, the recent service and the overall configuration of the machine. Final condition remains subject to inspection, technical confirmation and video review. _____ Main advantages • Attractive price compared to the original new price of approx. EUR 244,500 • Strong configuration for premium label finishing • Hot foil stamping and embossing capability • Flat screen printing unit for special effects and high-value applications • UV curing system included • Flat die-cutting unit included • Matrix removal, slitting and rewinding included • Still in production • Recent service in October 2024 • Compact and complete finishing solution for label converters

Condition: new, Year of construction: 2024, functionality: fully functional, control type: CNC control, bar length: 3,000 mm, bar diameter (min.): 3 mm, bar diameter (max.): 26 mm, We offer two new LNS bar loader magazines, model LNS GT 326. Hfedpjzl S Nrefx Aggen The mounting side is on the right.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MESSER MULTITHERM 3600 GLOBAL CNC PLASMA BED LENGTH 10300mm BED WIDTH 2100mm RAIL WIDTH 3650mm HYPERTHERM HPR 260. Cutting capacities: Mild steel cut capacity Dross free* 32 mm (1-1/4") Production pierce 38 mm (1-1/2") Maximum cutting capacity Hjdpfoy Tpqxex Aggjfn 64 mm (2-1/2") Stainless steel cut capacity Production pierce 32 mm (1-1/4") Maximum cutting capacity 50 mm (2") Aluminum cut capacity Production pierce 25 mm (1") Maximum cutting capacity 50 mm (2")

Condition: excellent (used), functionality: fully functional, 1 x Thread-drilling machine Steinel BT 6.52 with coolant system + small vise Technical specifications: Max. thread size: M 6 (further technical specifications see photos) The machine can be inspected while powered on. Hfsdpfxezk Iyqs Aggjn

Condition: used, Year of construction: 1974, Clamping length: max. 635 Distance between centers: 125 Table travel: 400 Maximum grinding travel: approx. 300 Hodpfx Agezcyynsgsfn Table speed, infinitely adjustable: 30-1000 mm/min Grinding spindle speed, 3 stages: 1750, 2150, 2850 1/min Weight: approx. 1800 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 5,971 h, fuel type: hybrid, color: red, Weights Empty weight: 2.950 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 2.100 cm Dimensions of cargo space: 640 x 98 x 199 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 1225 m Latest inspection: 2026-08-13 Production country: DE Additional information Please contact Vink Machinery for more information Teupen Leo 21GT with Fortuna trailer * 2015 Hjdjzwgh Topfx Aggjfn * 5,971 operating hours * Diesel and 230 Volt drive * 21 meter working height * 12.25 meter horizontal reach * Automatic outrigger * Coming-Home * Hydraulically adjustable undercarriage * Remote Control * 250 kg lifting capacity * Own weight 2,980 kg * Own weight Fortuna trailer 470 kg * Inspection valid until August

Condition: ready for operation (used), Year of construction: 2022, operating hours: 389 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Rotation Station • Workpiece Support Hsdpoy E I Hiefx Aggjfn • Base Plate 23 mm / 175 mm Big 70 • Machine Interface Box • () Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,035 kg, empty load weight: 1,305 kg, operation weight: 1,350 kg, lifting height: 2,150 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 08/2026, emission class: euro5, mast type: other, brakes: other, suspension: steel, Year of construction: 2026, operating hours: 2 h, Equipment: additional headlights, adjustable boom, hydraulics, low noise, rubber tracks, standard shovel, Mini Excavator GT JAPAN1000J Crawler Mini Excavator The GT JAPAN1000J mini excavator, in its new and improved version, is a compact machine weighing 1035 kg, designed for precise excavation work in confined spaces. Thanks to its adjustable width of 750–950 mm, it is ideal for narrow passages, private properties, gardens, and urban environments. Perfect for excavation work for installations, foundations, fences, and for clearing and leveling tasks. Kubota D722 engine – reliability and power The machine is equipped with a 3-cylinder Kubota D722 diesel engine with an output of 10.2 kW at 2500 rpm. This engine is known for its smooth operation, low fuel consumption, and high durability. This ensures that the mini excavator delivers stable and efficient performance, even under heavy use. Advanced hydraulic system The GT JAPAN1000J is equipped with a double gear pump with a capacity of 25 l/min and a Load Sensing valve system, which ensures smooth, precise, and energy-efficient operation. The working pressure of 16 MPa guarantees sufficient power for demanding tasks, while the maximum drawbar pull of 19 kN ensures good mobility on difficult terrain. Precision and ease of operation The mini excavator features ergonomic joysticks that enable intuitive and precise control. The swivel boom (54° to the left / 59° to the right) significantly facilitates working along walls and obstacles, while the extendable tracks provide extra stability and adaptation to different working conditions. Compact dimensions and mobility The total length of the machine is 3005 mm, the height is 2160 mm, and the width is adjustable from 750 to 950 mm. The turning radius at the rear is only 510 mm, which allows operation in very confined spaces. The ground clearance at the rear is 380 mm and the minimum ground clearance is 140 mm, which facilitates driving on uneven terrain. The tracks with a width of 180 mm and a length of 1330 mm provide stability and good grip. Technical data Weight 1035 kg Engine Kubota Configuration 3-cylinder diesel Rated power 10.2 kW / 2500 rpm Maximum drawbar pull 19 kN Type of hydraulic pump double gear pump Main pump output 25 l/min Working pressure 16 MPa Type of control valve Load Sensing valve Fuel tank capacity 15 l Arm digging force 5.5 kN Bucket digging force 6.5 kN Joystick Yes Swivel boom Yes Extendable tracks Yes Travel drive Two travel speeds Bucket capacity 0.02 m³ Travel speed 2.1 / 4 km/h Platform rotation speed 13 rpm Boom swivel angle left 54° / right 59° Grading ability 30° Maximum digging height 3060 mm Maximum dumping height 2150 mm Maximum digging depth 1870 mm Maximum digging radius 3410 mm Maximum reach at ground level 3350 mm Turning radius rear 510 mm Overall length 3005 mm Overall width 750–950 mm Overall height 2160 mm Ground clearance rear 380 mm Minimum ground clearance 140 mm Track width 180 mm Hedpfezrqpkjx Aggjfn Track length 1330 mm

Condition: reconditioned (used), modernized machines with new LTG StoreControl L control system one more machine available out of a previous total of 2 External dimensions: Overall height 6,000 mm Overall width 1,630 mm Overall depth 2,980 mm 30 carriers, each with a load capacity of 500 kg in the clear internal dimensions: W = 1,300 mm D = 863 mm H from 50 to 750 mm Total load capacity up to 40,000 kg Start of the operating opening at 870 mm above floor level, then 845 mm high Color: GRAY / BLUE, carriers sendzimir galvanized Surface cleaned, signs of wear possible Performance data: Hfedon D A Rrspfx Aggsn Vertical drive 1 x 2.2 kW / 400 Volt Horizontal drive 1 x 0.29 kW / 400 Volt additional extras: Lift door, manually operated Subject to errors, technical changes, and minor deviations in the photos Delivery and assembly currently mainly in Germany, Austria, and other neighboring countries.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 610 mm, turning diameter: 410 mm, spindle motor power: 18 W, spindle speed (min.): 30 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 81 mm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, total height: 1,700 mm, total length: 3,500 mm, total width: 1,700 mm, spindle nose: ASA 8, overall weight: 4,900 kg, swing diameter over top slide: 460 mm, spindle diameter: 255 mm, Equipment: documentation/manual, USED ​​3-axis lathe with driven tools and Fanuc 0i-TF CNC Hfodpfx Agozrnl Ajgen

Condition: refurbished (used), Year of construction: 2014, color channels: 6, Superb condition 2014 Arizona 460GT flatbed printer 2.5 x1.25 M bed great for printing 8 x 4 ft boards Low print volume from new only 40,880 prints 6 colour channels 2xwhite CMYK all heads in good condition nozzle test picture Hfsdpfxjz Sul Ij Aggon We have over 100 Arizonas installed in the UK Delivery, install, training and warranty in the UK by our engineers Or packed and loaded for export by truck or container. In stock immediate delivery.

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. Hfedpfx Agjh Tm Duegen The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Z-stroke: 530 mm POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.

Condition: used, Year of construction: 2000, total length: 3,300 mm, Tugger Clark GT 50E Drive Gas Hfsdpjyfiflefx Aggen Year built 2000

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center 2 Axes (X, Z) Model: Puma GT2100B Year: 2018 CNC: Fanuc CE Certification Hedpfx Agjz St Tqsgefn Chip Conveyor: Operational ✅ Documentation: Available ✅ Chuck: Operational ✅

Condition: like new (used), Year of construction: 2019, DOOSAN PUMA GT 2100 B LATHE YEAR OF FIRST INSTALLATION: 2019 CHUCK DIAMETER: 250 mm SWING OVER BED: 600 mm SWING OVER CROSS SLIDE: 390 mm RECOMMENDED TURNING DIAMETER: 255 mm MAXIMUM TURNING DIAMETER: 390 mm MAXIMUM TURNING LENGTH: 550 mm BAR WORK DIAMETER: 81 mm SPINDLE SPEED: 3,500 RPM SPINDLE NOSE: ASA 8 TURRET: 10 POSITIONS Hfedpfx Agezak Dxsgon TRAVELS: X: 230 mm Z: 580 mm WEIGHT: 3,600 kg

Condition: used, Year of construction: 2024, Working width 3600 mm Roller width 3800 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 40 N / mm Pressure total 16 to Cloth guiding system for woven fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Drive side nach Auftrag Operting side nach Auftrag Drive shaft dia 80 mm Hydraulic unit for separately pressure aus Edelstahl Hodpfx Ajtv H U Aoggsfn • The machine is completely rebuilt before delivery. • We deliver with warranty. • The machine is delivered without drive. • A new drive can be supplied on request and can be adapted to the local conditions. • (The photos show a similar machine in the state of delivery).