Used Gomaco Ghp 2800 for sale (1,748)

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale is a BOXMAKER® carton production machine by Horstmann Maschinenbau, designed for the flexible manufacturing of custom shipping cartons—precisely in the required size and quantity. Your advantages at a glance: Hnjdpfx Aoylw Nljdmek • Produce cartons "just in time"—individually controlled via touch panel • Reduction of storage costs and packing materials • Lower shipping costs thanks to perfectly fitting packaging • Fewer transport damages, increased customer satisfaction • Processes continuous corrugated board or sheet stock; complex cuts are possible Ideal for industry, wholesale, fulfillment, and e-commerce operations looking to optimize packaging processes for greater efficiency, sustainability, and independence.

Condition: ready for operation (used), Creasing machine for corrugated cardboard, 4 creases, 3 knives Hjdpswxdcmefx Admonk

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm Hnedpfx Adew Rf S Ssmjk cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: used, Model: Peeler BL 2800 Year of manufacture: 2015 Used Serial number: 10145585 Hnsdpfx Adeyyncasmek Inventory number: 3261 Capacity: 225 m/min Blower 2800 Diameter: 13 - 41 mm Marel Townsend blower unit Serial number: 10394495 Marel Townsend blower unit Year of manufacture: 2017 Steam: 1.7 - 3.4 bar, 78 kg/h Compressed air: 7 bar Russo SKV-NS-420-3-826 3 x 400 V, 50 Hz, 3 kW Power supply: 3 x 380 V, 50 Hz, 3.8 kW Dimensions: 900 x 600 x 1600 mm Marel Townsend blower unit dimensions: 1400 x 700 x 1200 mm Marel Townsend blower unit weight: 180 kg Weight: 340 kg

Condition: used, mileage: 577,574 km, first registration: 11/1987, fuel type: diesel, axle configuration: 6x4, wheelbase: 6,400 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 9,110 mm, total width: 2,520 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 1987, DUTCH TRUCK = Further Information = Technical Specifications Number of cylinders: 6 Engine displacement: 11,627 cc Axle Configuration Suspension: Leaf spring Maximum front axle load: 7,100 kg Rear axle 1: Max. axle load: 9,000 kg; Reduction: hub reduction axles Rear axle 2: Max. axle load: 9,000 kg; Reduction: hub reduction axles Weights Unladen weight: 11,760 kg Payload: 14,240 kg Gross vehicle weight: 26,000 kg Environment Emission class: Euro 0 Condition Damage: none Hjdpsuuli Djfx Admonk Financial Information Price: On request Identification Registration number: 10-BFJ-3 Further information Please contact Thierry Leemans for more information.

Condition: used, tank capacity: 2,800 l, GENERAL Design: vertical External diameter: 1,210 mm Overall height: 3,080 mm Top: open Location: outdoor storage Volume: 2,800 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm TANK Support design: feet Number of feet: 4 pcs Hedpfx Ajyci N Esdmenk EQUIPMENT Outlet: available MATERIAL SPECIFICATION Feet material: steel

Condition: like new (used), Year of construction: 2024, functionality: fully functional, TRI OPTIQUE Manufacturer: PELLENC Model: M 2800 BB HR Working width: 2,800 mm Option installed in June 2024: all-metal separator, including stainless steel. New belt. The machine is capable of sorting all types of plastics by grade, all metals including stainless steel, and wood. The machine has just been serviced. Feeding system: Manufacturer: SINEX Model: MU 75 6500 Power: 2 x 3 kW Hnsdpfx Aeyy Aa Tedmok Discharge conveyor: Manufacturer: RMIS

Condition: good (used), power: 10 kW (13.60 HP), HINGE AND LOCK SLOTTER FOR DOORS TECHNOMAT 2800 Hedpfx Aoykpl Aodmenk 2 VERTICAL ROUTER HEADS, 1 CHISEL MORTISER

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm Hnodpfswzyp Isx Admek --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: used, Year of construction: 2008, control Siemens 840D Hnodpfx Adewzypnsmjk

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, Prices upon request XG x 2800 5x Ca E200L 4x Hnsdpfx Aor Rddzodmok CA Dc 40 e The system was used for only 90 days and is in as-new condition. The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series by KEYENCE Germany. This advanced image processing system offers enhanced features and flexibility for demanding inspection applications. Technical Data: Laser Scanner / Profile Measurement: The XG-X2800LJ is specifically designed for profile measurement and 2D/3D image processing. Compatibility: It is compatible with line-scan cameras, LJ-V sensors, and 21-megapixel cameras. Flowchart-Based Programming: The XG-X is intended for advanced users, enabling programming in a flowchart style. Manuals and Software: User manuals and software are available for configuration and customization via PC, as well as for remote control and capturing images and results on a PC. Please note that any shown accessories are for illustrative purposes only and may not be included with the product. For more information, please visit the official KEYENCE website. If you have further questions or require assistance, I am happy to help!

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 2,800 mm, Box On Demand, endless corrugated cardboard, pay attention to your CO2 footprint. The machine listed here for processing endless corrugated cardboard belongs to the series of static machines, meaning cross-machine operations are performed while the cardboard remains stationary. The machine is designed for high productivity. The maximum working width for cartons is 2,800 mm. All tool settings are adjusted automatically. 1) Main machine body (automatic carton cutting unit): - Linear cross-cutting unit for head-foot cuts and cross-cuts on the cardboard. - Linear cross-creasing unit for cross-creasing the carton. (Available as a cross-creaser, or as a cross-creaser with perforation feature.) - 8 longitudinal creasing units from above for longitudinal creases on the cardboard. - 8 longitudinal cutting units for executing the longitudinal cuts. 2) Carton changer, 4-way cassette feed The motor-driven carton changer, operated with a lifting axis, uses 4 separate cassettes to feed cardboard into the main machine body’s infeed. Each cassette can accommodate raw material web widths up to 2,800 mm and feeds them automatically to the main machine body upon request from the machine control system. The third cassette can accommodate two working widths. 3) 5-way carton magazine Hnedpfx Adjyxw Agomok Five carton magazines supply and feed the raw cardboard to the processing machine. Stack heights of endless corrugated cardboard up to 1,500 mm are possible. 4) Control Cabinet, Controls, Electronics: Includes all components required to operate and control the system. Control cabinet components are based on Siemens technology.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 116130, type of input current: three-phase, type of cooling: air, electrical fuse: 16 A, open-circuit voltage: 42 V, welding current at 60% duty cycle: 210 A, input current: 19 A, protection type (IP code): IP21, welding current (min.): 18 A, welding current (max.): 280 A, input frequency: 50 Hz, We are offering this used Merkle RedMIG 2800 K welding machine, year of manufacture 2018. Open circuit voltage U0: 18–42 V Welding current at 30% duty cycle: 280 A Welding voltage at 30% duty cycle: 28 V Welding current at 60% duty cycle: 210 A Welding voltage at 60% duty cycle: 24.5 V Power factor cos φ: 0.8 Input voltage U1: 400 V Mains frequency: 50–60 Hz Fuse: 16 A Apparent power S1: 13.1 kVA Mains current I1: 19 A Mains current I1: 12.8 A Protection class: IP21 Cooling: AF For sale is solely the unit (gas bottle not included). Hnedpfxsy Aixzj Admsk If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2022, operating hours: 2,600 h, Equipment: all wheel drive, Caterpillar M318 Engine: Cat C4.4 – Power (ISO 14396): 129 kW / approx. 176 HP – Displacement: 4.4 l – Cylinders: 4 – Emissions: EU Stage V Travel performance Max. speed: up to approx. 35 km/h Hnodoyv Uh Uspfx Admok * Drive: hydrostatic travel drive * Steering: all-wheel steering with oscillating axle Tank & Hydraulics Diesel tank: approx. 350 liters * Hydraulic system: load-sensing hydraulics with multiple auxiliary circuits for attachments Air conditioning Only 2,600 operating hours and in very good condition

Condition: used, mileage: 110,769 km, power: 96 kW (130.52 HP), first registration: 04/2001, overall weight: 5,600 kg, fuel type: diesel, color: yellow, gearing type: mechanical, emission class: euro1, loading space width: 2,100 mm, loading space length: 3,450 mm, loading space height: 390 mm, total length: 6,330 mm, total width: 2,180 mm, total height: 2,450 mm, number of seats: 3, Equipment: ABS, crane, Equipment: * Body/Superstructure: Flatbed with crane * Harms bodywork construction * Flatbed with aluminum drop sides * Bed dimensions: 3,450 mm x 2,100 mm x 390 mm * Tow bar with Varioblock Crane: * Palfinger PK 2.800 A * Year of manufacture: 2000 * Engine-driven PTO (power take-off) * 2-point outriggers Reach/Lifting Capacity: * 3.15 m = 830 kg * 4.35 m = 600 kg * 5.60 m = 460 kg Hodpfsxvnq Tox Admenk Other: * Former VW IAA exhibition vehicle * 2 previous owners (1x VW) * German first delivery * Engine: 2.8 L – 96 kW * Payload: 2,495 kg Since 1972, your reliable partner for all things automotive and commercial vehicles, located in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the fields of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with a tailored offer! Trade-ins of your commercial vehicle or construction machinery are welcome. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offers generally do NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible at an additional cost. The information given in advertisements, online listings, price tags, and images represents non-binding descriptions and does not constitute guaranteed features. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment must be verified separately if necessary. Subject to error and prior sale.

Condition: used, Year of construction: 2022, Technical details: Hnsdpfxjynhw So Admek current intensivity: 9 A total power requirement: 5 kW weight of the machine ca.: 0,08 t voltage: 3x 400 V : 50/60 Hz Protection class: IP 21 cooling type: AF l Burner connection: EURO-Zentralanschluss

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Hnsdpfxeq I Ty Rs Admok Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 CNC Rotary Table - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Spindle torque max. duty cycle 100% (Nm): 191 Hedpeyk T Emjfx Admjnk Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Tool Changer - Tool stations: 60 Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted.

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Hedpfx Aswqg Ensdmonk Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute Hnsdpfeugf Dwsx Admsk - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Condition: good (used), Year of construction: 1993, electric motor, three-phase motor -Manufacturer: Fimec, electric motor -Type: H132SD2UE -Power: 11 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 Hnodpeyhnpuefx Admek -Protection rating: IP54 -Number: 4x motors available -Price: per piece -Dimensions: 480/255/H340 mm -Weight: 53 kg

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Hnodsxd Ruwjpfx Admek Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: excellent (used), Year of construction: 2021, The Marel 2800 Peeler accurately removes the inedible cellulose casing from your cooked and chilled sausages without damaging the sausage itself. The high capacity sausage peeler can handle a wide variety of products, including very small sausages. Hnodpexbucgsfx Admok

Condition: used, self centering hub (5146) Make WMW maximum 2800 RPM. Hsdpfx Aedb Uzxjdmjnk

Condition: used, Electric motor, three-phase motor -Manufacturer: ZP, electric motor type 100 -Power: 3.3/2.6 kW -Speed: 2800/1400 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Dimensions: 355/235/H200 mm -Weight: 24 kg Hnsdsr U Sfkspfx Admjk