Used Gluing Machine Tunkers for sale (64,710)

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 20131018, working width: 1,640 mm, compressed air connection: 6 bar, total width: 2,600 mm, total length: 12,500 mm, total height: 2,250 mm, overall weight: 7,100 kg, Fasson gluing machine with a working width from 150 mm up to a maximum of 1,640 mm. It can process corrugated or honeycomb board up to 20 mm thickness and cardboard from 350 g/m². Plate thickness: 8 mm, material: sponge/rubber foam. Power requirement: approx. 15 kW. Gjdpfx Ajy R Emksmueub

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters Gedpowka S Ijfx Amuoub - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Guodpfx Aexgqmxsmusb Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams. Gusdsv Ipl Tspfx Amusb

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Gusdpfxox Upgcs Amueb

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Gedpfoy Sfb Rex Amuoub Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Power supply: 380 V Weight: 250 kg Made in Italy.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 741883-01, Fisher + Rückle, Omnimaster 900, year of manufacture 2015 Guedpfsy Idmkex Amueb Veneer longitudinal splicing machine, bonding with urea glue, veneer thickness from 0.4-1.5 mm, feed speed: 5-50 m/min, dimensions (L x W x H): 2400 x 2000 x 1900 mm, weight approx. 1500 kg, connected load: 9 kW, electrical consumption approx. 4 kWh, compressed air: 5 NL/min, current 20A/300mA FI / RCD Location: Switzerland

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Guodpfx Amoy Rdzaoueb Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg

Condition: used, machine/vehicle number: 006290, Max working width: 1300 mm Max. machinable height: 100 mm No of Rollers: 2 Guodpfx Amou A Evheueb

Condition: used, width 3.000 mm Gjdslf H Uhjpfx Amuoub height 1.900 mm length 800 mm Pneumatic gluing press FEDERHENN MASCHINEN type 99.98 with equipment for the final assembly of grave crosses. The press is modular and mobile and can be converted for different pressing tasks.

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Gsdpfsyi Emyjx Amuoub Description: - 2 pressing stations

Condition: good (used), Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Guodpfxoyv Inze Amuob Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall dimensions mm 1800 x 1900 x 2100 h Weight kg 500

Condition: used, Dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf This device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 2535 Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Godpfx Aeyq S Iyjmuoub On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Kantenanleimmaschine / Edge Gluing machine Essor Gsdpfjymaztsx Amusub Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Gusdeymfxqspfx Amuob Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: good (used), Year of construction: 2004, Fasson gluing machine - infeed width 2100mm Gusdperwi N Hefx Amujb - with press belt - Meler hot melt gluing machine with 4 heads year 2021

Condition: new, Year of construction: 2026, Glue spreading machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) working width: 1.300 mm Gedpod Iz Dfofx Amueub max. passage height: 100 mm speed: 18 m/min working height: 900 mm diameter of application rollers: 185 mm connected load: 0,5 Hp 0,37 KW operating side: right Electricity: 400 V/ 50 Hz/ 3 phases Technical equipment: - Structure of the glue spreader made of welded sheet metal. - 1 motor for driving the two rollers - Glue spreader rollers covered with acid-resistant special rubber, form-ground and grooved, wear-resistant. - The thickness of the rubber layer can be shape ground several times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to max. 5 mm on the workpieces. - Glue dosage by means of zinc sheet distribution tray. Easily extractable for cleaning. - 1 handwheel to adjust the opening of the rollers. - Accident prevention protection of the rollers - Electrical components according to the highest quality standard - CE standard

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Gedpfxsh Axd Ne Amusub Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 12, Kantenanleimmaschine - Edge Gluing Machine Jagenberg KAM 60Serial-No. 12.30124/11 Working width max. 60mm Kaltleim / Cold Glue system Gusdpok Tu Ekefx Amuob Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Zweiwalzen Anleimmaschine für Kaltleim als Tischgerät, dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf Two roller Gluing machine for Cold glue as table-top machine, this device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 20185 Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue Gusdpfexln R Sex Amueb Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Kantenanleimmaschine - Edge Gluing Machine Sumbel Perkeo Year 2014 - Serial-No. 40050 Working width max. 60mm Kaltleim / Cold Glue System --wie neu / like new-- Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Guodpfxjwgdw Tj Amusb

Condition: good (used), Year of construction: 1991, Edge banding machine for shaped parts, edge bander, edge banding machine -Workpiece thickness: 10-85 mm -Heating fan: 6 kW, pre-coated edges -Cutting knife -Edge plate -Transport dimensions: 900/700/H1080 mm Guedpfxjb A Ninj Amueb -Weight: 135 kg

Condition: good (used), Year of construction: 1986, machine/vehicle number: 2967, Tränklein gluing machine ZW-D 500, with cardboard device, machine number 2967, built in 1986, machine is in good condition, available immediately If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment. Gsdpfevviriox Amueub

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Gjdpornkwrsfx Amuoub Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: used, Year of construction: 1993, Used machine Gsdpfx Ajw I Ur Njmusub Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim