Used Gildemeister Gmx 400 for sale (223)

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping Nsdpfx Aohbal Djmnslb - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: ready for operation (used), Gildemeister 852.14.00-00.21 card (851.75.00-00.21), used, normal signs of use, 100% functional Nsdpei D U S Ujfx Amnjlb

Condition: used, Year of construction: 2006, turning diameter 600 mm turning length 1250 mm Nodpfx Aoy I A Utjmnslb control Siemens 840D radial face slide travel 320 mm turning speed range 5-3.000 U/min Number of tools 8 St. total power requirement 42 kva weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6x2,15x1,95 m

Condition: good (used), Year of construction: 1999, NEF520 Nlodpfxoy S Eu Rs Amnjb year of manufacture 1999

Condition: used, Year of construction: 2001, Technical details: turning length: 300 mm x-axis: plan: 800 mm longitudinal traverse (z-axis): 300 mm control: Siemens 840D revolution per minute: Hauptantrieb: 20 - 5000 U/min Revolution driven tool (turret): 6000 U/min. revolution per minute: C-Achse: 0 - 100 U/min spindle bore: 79 mm Torque: Hauptantrieb: 200 Nm max. torque on the spindle: 240 Nm max. torque at clamping center: Werkzeugträger: 28 Nm m rapid motion - x-axis: 100 m/min rapid traverse Z-axis: 45 m/min tool turret - number of stations: 12 Stationen / Stations tool taper: VDI 40 Main spindle capacity: 27 / 20 kW spindle hours: 42.400 h operating hours - idle run: 93.728 h electrics - voltage/frequency: 3~ / 400V / 50Hz V/Hz interface: ja total power requirement: 50 kVA Weight approx.: 8,0 t dimension machine xH: 3,2 x 3,95 x 2,8 m dimension L-W-H: Späneförderer: 3400 x 1150 x 2180 mm Nedpjvamgxofx Amnjlb Application: This vertical lathe is suitable for 2-axis machining (turning, drilling; milling, Y-axis) of chucked parts. Equipment: -High-pressure coolant unit BMF for 500 liters -Make Bürener chip conveyor with oil mist separator/industrial filter ifs/ IFM 1000CTV (electrostatic extraction) -Workpiece loading and unloading device with/for 20 stations -Power chuck Ø 225mm, foot switch -Clamping surface in the work area: W: 340 x H: 430mm with 7x T-slots according to DIN 650 -Hydraulics -6x various turning tool holders and 2x various tool holders (revolving) *

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,752 h, functionality: fully functional, Equipment: documentation/manual, We are offering this ready-to-use GILDEMEISTER CTX 200 series 2 CNC turning and milling center, year of manufacture 2001. Manufacturer: GILDEMEISTER Type/Model: CTX 200 series 2 Contrary to the photo, the machine is sold with a three-jaw chuck and not a collet chuck; various VDI20 toolholders are included as well. The short bar feeder has not been in operation for a long time, so its condition is unknown. Nsdpfx Aoyu Uytjmnolb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, CNC Swiss-Type Automatic Lathe GILDEMEISTER SPRINT 20/8 With Fanuc 32i Control Year of manufacture: 11/2019 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range: max. 10,000 rpm Travel Z1: 60 mm SUB SPINDLE Turning diameter: max. 20 mm Travel X2: 220 mm Travel Z2: 170 mm Speed: max. 10,000 rpm SLIDE 1 Travel X1: 50 mm Travel Y1: 325 mm SLIDE Y2 Travel Y2: 85 mm With the following accessories: Full safety enclosure with interior lighting Various tool holders Tool holder for slides 1-3 4 driven tools with 4 spindles, ESX/ER 16 fitting C-axis for main and sub spindle Y-axis on slides 1-2 2 cross slides Workpiece unloading conveyor 4-color signal light beacon Fire extinguishing system Coolant system 165 l (Pumping capacity 90 l/min 1 bar) THE MACHINE IS IN AS-NEW CONDITION!! THE MACHINE HAS ONLY 110 PROGRAM RUNNING HOURS!! Nljdpfjy Rngaox Amnsb

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Sliding Headstock Automatic Lathe GILDEMEISTER SPRINT 20/8 linear Equipped with Fanuc 31i control Year of manufacture: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range: max. 10,000 rpm Z1 stroke: 80 mm SUB SPINDLE Turning diameter: max. 20 mm Z2 stroke: 300 mm Speed: max. 10,000 rpm SLIDE 1 X1 stroke: 50 mm Y1 stroke: 350 mm 6-position tool holder 12 x 12 mm 5 driven tools, including spindles with ESX 16 collet holders SLIDE 2 X2 stroke: 240 mm 4-position tool holder for external machining, 12 x 12 mm 4-position tool holder for internal machining, up to 20 mm diameter Nsdpfx Aey Rm Snsmnjlb 5 driven tools, including spindles with ESX 16 collet holders 6 + 2 axes, 2 Y-axes as standard Linear drive for maximum precision Including the following accessories: Fully enclosed safety cabin with interior lighting Various tool holders C axis for main and sub spindle Bar feeder LNS Quick Load Servo 80 S2 Workpiece unloading conveyor Hinged belt chip conveyor 4-color signal tower Fire extinguishing system Coolant system 250 liters (Pump capacity: 120 l/min, 1.5 bar) THE MACHINE IS IN EXCELLENT CONDITION!! THE MACHINE HAS ONLY 4,426 PROGRAM RUNNING HOURS!!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Nlsdoy Hg S Hopfx Amneb Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

Condition: good (used), Year of construction: 2007, operating hours: 30,395 h, functionality: fully functional, Main spindle: Speed up to 5,000 rpm Counter spindle: 6,000 rpm C-axis turret: 12 stations Siemens 840D Powerline Max. turning diameter: 320 mm Max. turning length: 600 mm Travel paths: X-axis: 250 mm, Z-axis: 600–635 mm Sub spindle Nsdpfxsy R Ddbe Amnslb Y-axis Chip conveyor C-axis Driven tools Bar feeder

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm Nsdpfxjyvz Ibo Amnolb • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar • Clamping pressure tailstock: 50 bar

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg Nodpfx Amjv Ehawsnelb CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, For sale is a high-quality CNC lathe, model Gildemeister CTX 620 Linear, year of manufacture 2004. The machine underwent a comprehensive overhaul and technical refurbishment in 2025, during which various components were replaced. This overhaul by DMG Used Machine alone cost €60,000. A brief overview of the main works carried out during the overhaul: - Retrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of energy chain (Z axis) - Replacement of all components in the X and Z axis energy chains (cables, hoses, fittings, etc.) - Tailstock repair The machine features a 12-station VDI 50 turret (Duplomatic), 6 tool holders for driven tools, and a 400 mm Berg (KH400) chuck. Control system: Heidenhain. The machine is still in occasional production use. Nledey I U Uljpfx Amnob Inspection possible at any time.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 02280000301, turning diameter over cross slide: 565 mm, turning length: 1,300 mm, turning diameter: 440 mm, spindle bore: 90 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 45,000 W, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (min.): 20 rpm, rotational speed (max.): 4,000 rpm, total height: 2,230 mm, total length: 5,742 mm, total width: 2,730 mm, feed length X-axis: 315 mm, feed length Z-axis: 1,350 mm, quill travel distance: 150 mm, quill stroke: 150 mm, swing diameter over cross slide: 565 mm, turning diameter over bed slide: 840 mm, overall weight: 10,700 kg, swing diameter over bed slide: 680 mm, swing diameter over top slide: 680 mm, Equipment: documentation/manual, rotational speed infinitely variable, NO DEALER INQUIRIES – Dealer inquiries will not be answered. For sale is a DMG GILDEMEISTER CTX 520 linear – a robust, proven CNC lathe currently in production. Nlodpfxeypkv He Amnjb Inspection and demonstration under power are possible at any time by appointment. The machine is sold as seen. Additional photos and videos of the machine can be sent to you by email upon request.

Condition: good (used), Year of construction: 2004, Gildemeister CTX 510 Control: Siemens 840 D with Shop - Turn Year of manufacture: 2004 Travel X / Z: 300 / 1050 mm Turret: 12 stations Tool holder: VDI 40 Spindle speed up to: 3,500 rpm Bar capacity: 90 mm Quill travel: 150 mm Njdjy N S E Repfx Amnelb Tailstock Coolant pressure: 20 bar Chuck size: 315 mm Spindle hours approx.: 14,000 * Batch sizes of 0 - 5 have been produced on the machine * Programming was carried out directly at the machine

Condition: ready for operation (used), Year of construction: 2005, operating hours: 19,229 h, functionality: fully functional, machine/vehicle number: 8043943123C, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Turning diameter: 465 mm Turning length: 1,050 mm Swing diameter: 680 mm Chuck diameter: 325 mm Nedpfx Amsy D I Ttonslb X-axis travel: 300 mm Z-axis travel: 1,050 mm Spindle speed range: 3,500 rpm Rapid traverse X/Z: 30 m/min MACHINE DETAILS Control: Siemens 840 D Number of tool positions: 12 positions Tool holder: VDI 40 Weight: 7,500 kg Operating hours Spindle hours: 19,229 h Power-on hours: 81,347 h Note: The machine can be inspected under power upon request.

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 Nlodpfx Asy Erzdsmnob --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: used, Year of construction: 2011, turning diameter 410 mm turning length 800 mm control Sinumerik 840 D ERGOLine Siemens greates pass round over bed 700 mm max. turning diameter 410 mm travel -x axis 300 mm travel -y axis +/- 60 mm travel -z axis 800 mm turning speed range - spindle max. 4.000 U/min chucking diameter 260 mm spindle bearing diameter 130 mm power capacity 40% ED = 34 kW power capacity 100 % ED = 25 kW max. Torque 280 Nm C-Axis 0,01 ° turret (x-stations) 12 tool taper DIN 69880 / 40mm driven statition 6 pos Spindle speed driven tools ~ 4.000 min -1 power capacity - driven tools 40% ED = 11,3 kW power capacity - driven tools 100 % ED = 5,6 kW rapid traverse ( X / Y / Z ) 30 m/min tailstock adjustment 800 mm morse taper MK 5 total power requirement 65 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 5,5 x 3,0 x 2,5 m CNC Turning- and Milling Center GILDEMEISTER - CTX beta 800 V4 - Spindle-Hours: ca. 14.779h - Package for unstable networks - Control panel extension - 95mm hollow clamping device - 95mm hollow spindle stop - Differential clamping for main spindle Nlodpfx Amoy Hl Exonob - incl. workbench - incl. tool cabinet - incl. tool cabinet for VDI tool holders - incl. 2x powered tools - incl. 6x tool holders

Condition: used, Year of construction: 1994, operating hours: 26,793 h, functionality: fully functional, machine/vehicle number: 054204, turning diameter over cross slide: 520 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 520 mm, swing diameter over cross slide: 290 mm, spindle speed (min.): 2,000 rpm, Lathe Ø520 x 1500 mm. 70mm through-bore and MK5 in the tailstock. Super precise bench. Has had the side rails and spindle in X renovated. Forkardt 315 mm centering chuck with many extra jaws and Multifix quick-change steel holder. Nice beginner bench if you want to try your hand at CNC. We have the chip tray and cooling water tank with the pump. It's just not shown in the photo. The control can be set to German, English, Spanish or Italian. I have all the documentation on the machine. The control is Phillips-Grundig and I can possibly help with training. The bench weighs 3,000 kg so we can't load it with a forklift. It has to be picked up by crane truck. Nsdpjy Sbh Tefx Amnolb

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 480 mm, turning diameter: 650 mm, travel distance X-axis: 480 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 17 m/min, Equipment: chip conveyor, cooling unit, Gildemeister CTX 600 CNC Lathe – Well-Maintained, Inspected & Ready for Operation For sale is a Gildemeister CTX 600 CNC lathe in well-maintained, technically flawless condition. The machine has been serviced regularly and is in good condition both visually and mechanically. It is fully operational, inspected, and immediately ready for use. The machine is equipped with a new control cabinet cooling unit (Rittal SK 3127.100, year of manufacture 2023). This is an air/air heat exchanger designed for reliable and low-maintenance cooling of the control cabinet electronics, thereby improving operational safety and extending component lifetime. With our all-inclusive service package, we personally handle the entire service process upon request – from delivery to commissioning of your new machine. This includes unloading, positioning, and alignment of the lathe. Our experienced service technicians will then professionally commission the machine, carry out all necessary function checks, and ensure that your Gildemeister CTX 600 operates reliably and precisely. Additionally, we offer customized training sessions for your staff, so you can make optimal use of the machine from the start. Even after installation, we remain at your disposal – whether for maintenance, technical queries, or future upgrades. With our all-inclusive package, you have nothing to worry about – we ensure everything runs smoothly so you can fully focus on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units, to make your production even more efficient and cleaner. Our Service Commitment: With us, quality, expertise, and customer satisfaction come first. Our team is made up of qualified and experienced technicians, specializing in Gildemeister machines as well as other brands. Nlodpfx Ajy Ivflemnob We place great value on personal support and are happy to assist you at any time, even after the purchase. You also have the opportunity to inspect and test the machine under power at our facility at any time. You are warmly invited to visit us and see the condition and operation of the machine for yourself. With us, you are in the best hands – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information subject to change and without guarantee.

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center manufactured by DMG, model CTX beta 800, year of manufacture 2009. The machine is in a well-maintained and fully operational condition. Technically flawless and immediately ready for operation. Technical Data Machine type: CNC Turning Center Manufacturer: DMG Model: CTX beta 800 Year of manufacture: 2009 Control system: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer service Technically flawless and fully functional Inspection under power possible by appointment Service and maintenance reports available Extensive accessory package Driven tools by WTO Nedpfx Amsyq Hq Nsnjlb Further documentation and photos available on request Availability: from July 2026 If interested, simply write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 2004 Sauter 8-position VDI 20 turret with all stations powered tools Spindle holding brake Interpolating C-axis Reinforced coolant pump 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color display Working area & capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Distance between centers: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (according to DIN 55027) / Mount MK 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & axes Rapid traverse (X/Z): 8 / 10 m/min Feed speed: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool turret & tailstock Turret: 8-station disc turret (Sauter), all stations powered Speed for driven tools: Max. 6,000 rpm (3.8 kW) Tooling system: VDI 20 (DIN 69880) Tailstock: Quill diameter 70 mm, stroke 120 mm, MK 5 mount Dimensions & capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10-115 mm Travelling steady rest with rollers, guide diameter 10-115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-action chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, includes speed monitoring with separately adjustable speed supervision. Njdpjy Dckaefx Amnolb Tooling equipment: fixed turning tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used in single-part production for prototype manufacturing. Low spindle running hours Available immediately.

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 68,921 h, functionality: not functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, swing diameter over cross slide: 290 mm, quill stroke: 180 mm, spindle speed (max.): 2,800 rpm, overall weight: 3,200 kg, Good day, We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister. Manufacturer: Gildemeister Model: NEF 500 Plus Nodpfsy Hr U Hox Amnolb Year of manufacture: 1994 Total operating hours: 68,921 hours Turning diameter: 500 mm Turning length: 1,500 mm Control system: Manual Plus Spindle bore diameter: 70 mm Speed range: 8 – 2,800 rpm Gear stages: 3 Maximum swing diameter over cross slide: 290 mm Spindle nose: DIN 55027 size 8 Tool holder type: C Tailstock quill stroke: 180 mm Machine weight: approx. 3.2 t Dimensions (L x W x H): 3.0 x 1.8 x 1.8 m Note: The above technical data have been taken from the operating manual, manufacturer brochures, or other sources, for the accuracy and completeness of which we cannot accept any liability. Scope of supply: 1 used Gildemeister NEF 500 Plus cycle lathe Condition: The cycle lathe is not operational because the control does not power up. The machine can be inspected under power in our workshop, but cannot be put into operation. We are therefore selling the machine as defective. We would be pleased if this machine is of interest to you. Your Serviceteam Mertens & Frowein GmbH

Condition: used, Year of construction: 2004, control Heidenhain turning length 1.000 mm turning diameter over bed 500 mm turning dia. over slide 290 mm centre distance 1.500 mm Nljdpfx Asy A Tdbemneb x-axis 260 mm z-axis 1.000 mm spindle bore 70 mm spindle tunring speed 3.000 U/min spindle motor 12 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation Njdpfxox Sx Hte Amnjlb • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel