Used Gildemeister Ctx Beta 500 for sale (237)

Year of construction: 1999, condition: ready for operation (used), Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible. Iedpfxsza E Sqj Aa Isth

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm control Heidenhain Eltropilot Itedpfxjy I A U He Aa Ish greates pass round over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t

Operating hours: 68,816 h, condition: ready for operation (used), functionality: fully functional, overall weight: 5,500 kg, total length: 4,500 mm, total width: 1,950 mm, total height: 1,750 mm, torque: 263 Nm, turning diameter: 290 mm, bar diameter (max.): 72 mm, bar passage: 72 mm, chuck outer diameter: 200 mm, feed length X-axis: 212 mm, feed length Z-axis: 640 mm, quill diameter: 80 mm, quill stroke: 100 mm, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 10 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, swing diameter over bed slide: 500 mm, swing diameter over cross slide: 290 mm, turning length: 640 mm, type of input current: three-phase, machine/vehicle number: 310142, Equipment: documentation/manual, Basic Data Manufacturer: Gildemeister Type: CTX 400 Machine No.: 310142 Year of Manufacture: Not specified, presumably early 1990s Control System: Gildemeister EPL / Grundig Operating Hours: 68,816 h Weight: 5,140 kg Dimensions L x W x H: 4,527 x 1,940 x 1,730 mm Connection: 400 V / 50 Hz Power: 45 kVA Turning Data Minimum Spindle Speed: 25 rpm Maximum Spindle Speed: 5,000 rpm Maximum Torque: 210 / 263 Nm Turning Diameter: 290 mm Turning Diameter over the Way Rest: 500 mm Turning Diameter over the Facing Slide / Facing Guide Cover: 290 mm Turning Length: 640 mm Bar Diameter / Spindle Bore: 72 mm Iodjy Tx Awepfx Aa Ioth Chuck Outer Diameter: 200 mm Axes / Travels Feed Travel X-axis / Facing Travel: 212 mm Feed Travel Z-axis / Longitudinal Travel: 640 mm Rapid Traverse X-axis: 10 m/min Rapid Traverse Z-axis: 15 m/min Y-axis: Not available / leave blank Tailstock Quill Diameter: 80 mm Quill Stroke: 100 mm Quill Taper: MK 4 Maximum Quill Pressure: 800 daN Tool Holder Tool Stations: 12 Tool Holder: VDI 30 Powered Tools: Not available / do not enter C-axis: Not available / do not enter

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Color: Pink Rose 3 axes X, Z, C Type: CTX 400 Series 2 CNC Heidenhain With conveyor Itodpfxjy A Imqe Aa Ioh With driven tooling With documentation

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister Lathe Color: White 3 axes X, Z, C Model: CTX 400 Series 2 Iodpfx Ajy A Ilyja Ioth CNC Heidenhain With chip conveyor With driven tooling With documentation

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 313154, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: GRUNDIG, controller model: ELTROPILOT, input voltage: 400 V, input frequency: 50 Hz, input current: 64 A, nominal power (apparent): 44 kVA, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, Equipment: documentation/manual, GILDEMEISTER CTX 400 E CNC Lathe - Swing diameter over bedway cover: 570 mm - Swing diameter over cross-slide cover: 420 mm - Cross travel (X-axis): 220 mm - Longitudinal travel (Z-axis): 635 mm - Main spindle headstock diameter: 170 mm - Spindle diameter in front bearing: 120 mm - Chuck diameter: 200/250 mm - C-axis speed: 100 rpm - Holding torque: 200 Nm - Indexing accuracy: 0.04° - Including 12-station tool turret, with 6 driven positions - Tailstock diameter (front): 80 mm - Tailstock travel: 515 mm - Tailstock taper: MT 4 Itedpfsy I Tcuox Aa Ijh The machine is equipped with a tailstock, tool holders in the tool turret, and a three-jaw chuck, diameter: 200 mm. Attention: The item must be collected bindingly between 24.08. and 27.08.2026 by prior arrangement. FCA D-61352 Bad Homburg – loaded onto truck

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Iedpjy Hg S Hefx Aa Isth Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm Iedpfx Aev Ehawsa Ijth travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: ready for operation (used), Year of construction: 2005, operating hours: 19,229 h, functionality: fully functional, machine/vehicle number: 8043943123C, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Turning diameter: 465 mm Turning length: 1,050 mm Swing diameter: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Spindle speed range: 3,500 rpm Rapid traverse X/Z: 30 m/min MACHINE DETAILS Control: Siemens 840 D Number of tool positions: 12 positions Tool holder: VDI 40 Weight: 7,500 kg Operating hours Spindle hours: 19,229 h Ijdpfx Aey D I Ttja Ijth Power-on hours: 81,347 h Note: The machine can be inspected under power upon request.

Condition: good (used), Year of construction: 2004, Gildemeister CTX 510 Control: Siemens 840 D with Shop - Turn Year of manufacture: 2004 Travel X / Z: 300 / 1050 mm Turret: 12 stations Tool holder: VDI 40 Spindle speed up to: 3,500 rpm Bar capacity: 90 mm Quill travel: 150 mm Tailstock Coolant pressure: 20 bar Chuck size: 315 mm Spindle hours approx.: 14,000 * Batch sizes of 0 - 5 have been produced on the machine * Programming was carried out directly at the machine Itsdpfx Ajy N S E Rja Ioh

Condition: excellent (used), Year of construction: 2007, For sale: CNC LATHE GILDEMEISTER CTX 410 V6 with driven tools, Y-axis, sub-spindle TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 stations for VDI-30 tool holders (all stations driven) - Max spindle speed: 5000 rpm - C-axis on both spindles Iedpfx Aey Rbz Dja Ieth - Driven tools - Y-axis - Sub-spindle - Max turning diameter X-axis = 320mm - Max turning length Z-axis = 600mm - High-pressure coolant system - Hydraulic 3-jaw chuck 250mm on the main spindle - Hydraulic 3-jaw chuck 200mm on the sub-spindle - Main spindle through-hole (bore diameter 77mm) - Parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a complete inspection. 100% operational. Connected and ready for operation. Stal-Com company has been dealing with the sale, service, and training on DMG group CNC machines for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers from Poland, but also from all over Europe and parts of Asia. Every machine can be inspected in operation, as we also provide CNC machining services. After purchasing a machine from us, we offer operator training as well as on-site production setup. We have long-term cooperation with many companies to whom we supply additional machine tools.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT Itsdpfjza D Rfjx Aa Ieh C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Ijdpfxex Sx Hte Aa Isth Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, travel distance X-axis: 380 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Ijdpfxsx Stlqj Aa Ioth Additional equipment • Tool holders (as shown in pictures) will follow • Tailstock will follow Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW Iedpfjvgb Epsx Aa Ijth spindle turning speed range: 5000 U/min speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min diverse toolholders: VDI 40 rapid traverse Z-axis: 45 m/min weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher *

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing Iodpfx Aoub Amlea Isth

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. Itjdpoxf Iamefx Aa Ish More specs of the machine, check last two pictures.

Condition: excellent (used), Year of construction: 1993, operating hours: 2,859 h, functionality: fully functional, turning length: 600 mm, turning diameter: 290 mm, Universal Lathe – GILDEMEISTER CTX Year of manufacture: 1993 Operating hours: 2,859 h • 12-position turret tool holder • Max. spindle speed: 5,000 rpm • Max. turning diameter (X axis): 290 mm • Max. turning length (Z axis): 600 mm • Hydraulic 3-jaw chuck, Ø 200 mm • Spindle bore: Ø 66 mm • Chip conveyor included Itsdpfx Ajyxgi Nsa Ish The machine is in very good condition and was previously used in a technical training facility.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 202 mm, travel distance Z-axis: 450 mm, spindle motor power: 12,000 W, total height: 1,730 mm, total width: 1,563 mm, overall weight: 3,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D powerline, product length (max.): 4,000 mm, number of axes: 3, This 3-axis Gildemeister CTX 310 was manufactured in 2003. It features a maximum turning diameter of 246 mm and a turning length of 445 mm. The machine is equipped with a spindle power of 12 kW and a maximum spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Availability: 2 units available • Spindle • Nose: FL 140 h5 • Max torque: 115 Nm (153 Nm at 40% S6) • Bore: 69 mm • Chuck diameter: 170 mm (optional 210 mm) • Bar capacity: Ø 50 mm • Working range • Swing over bed: 500 mm • Max turning diameter: 246 mm • Max turning length: 445 mm • Distance between centers: 600 mm • Turret and tools • Turret type: VDI 30 • Tool stations: 12 Isdpfoympcasx Aa Ieth • Driven tools speed: 4200–5000 rpm (depends on control: Fanuc/Siemens/Heidenhain) • Driven tools power: 3.3–4.4 kW • Feeds and axis data • Rapid traverse (X/Z): 24/30 m/min • C-axis rapid: 100 rpm • Feed force (X/Z): 450 daN • Resolution (X/Z): 0.001 mm • Bed • Inclination: 45° • Material: Cast iron • Electrical and auxiliary • Supply voltage: 400 V (±10%), 50 Hz • Total installed power: 24 kVA • Hydraulic system pressure: 50 bar • Coolant tank capacity: 175 liters • Control systems (options): GE-FANUC 21i-TB, Siemens 840D, Heidenhain 4290 E Additional equipment • Chip conveyor (both units) • Extraction unit (one unit)

Condition: excellent (used), Year of construction: 2016, operating hours: 75,078 h, functionality: fully functional, CNC Turning and Milling Center Gildemeister CTX gamma 1250 CT – Technically Excellent Condition (Year of manufacture: 2016) Operating hours: 75,078 Spindle hours: 48,772 Available from: Week 47 / 2026 (Inspection under power during ongoing production possible) Basic Equipment Turning length: 1,250 mm Main spindle as integrated spindle motor (ISM102) Drive power: 35/45 kW (100/40 % DC) Spindle speed: up to 4,000 rpm Partial hollow chucking device (hydraulic) Draw tube inner diameter: 104 mm, 848 mm depth C-axis with hydraulic spindle brake Upper cross slide with turning/milling spindle as motor spindle Mounting: HSK-63A DIN 69893 Hydraulic clamping during turning Y-axis: ±200 mm B-axis: ±120° (torque motor) Tool disc magazine: 36-position NC tailstock with mounted, hydraulically traversable quill and fixed live center Absolute, direct measuring systems on X, Y, and Z1 axes Coolant pump: 6 bar, 20 l/min, filtration fineness 10 µm Cooling system for spindle motors, motor console, turning/milling spindle, and B-axis USB and Ethernet interfaces Control CNC controller: Siemens Sinumerik 840D solutionline Operation: ERGOline Control Software: SINUMERIK Operate, ShopTurn 3G Operating system: Linux Extended Equipment Tool chain magazine: 120-position (instead of 36-position) Mechanical oil mist separator, filter class H13 Chuck flushing device on main spindle Coolant supply through spindle Tropical package (up to 40°C ambient temperature) Workpiece measuring probe BLUM TC60 incl. cycle package 3D data model of work area (STEP / IGES) Profibus interface Hand-held control device with jog mode and emergency stop function Tailstock force increased to 20 kN Special tailstock version for torque-proof pressure device Coolant & Chip System Coolant cleaning unit: Filter unit FK 20 (20 l/min) Coolant tank 950 l Magnetic roller MW180 Process pumps: 5 bar / 20 bar Isdpoy A Hngefx Aa Ieth Chip conveyor type 300 S-2 (wear-resistant design, XAR) Return delivery pump: 1.2 bar Condition The machine has been regularly serviced by Gildemeister service and is in technically excellent condition. Dimensions & Weight Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg Total weight incl. accessories: approx. 22,605 kg Number of packages: 11 Loading meters: approx. 21 Disassembly, loading, transport, and recommissioning can be organized Machinery Trade Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: excellent (used), CNC Turning-Milling Center Gildemeister CTX gamma 1250 CT, Year 2016 Pictures to follow... Available from March 2027 Base machine: CTX gamma 1250 CT with a turning length of 1250 mm - main spindle as integrated spindle motor, ISM102, drive power 35/45KW (100/40% duty cycle), 4000 rpm - partial hollow clamping device (hydraulic), draw tube inner diameter 104 mm x 848 mm depth - C-axis and spindle brake (hydraulic) - upper cross-slide with turning/milling spindle as motor spindle with hydraulic clamping during turning, HSK-63A DNI 69893 interface - Y-axis ±200 mm - B-axis ±120°, torque motor - disc-type tool magazine with 36 stations - NC tailstock with bearing-mounted, hydraulically movable quill, fixed center - absolute, direct linear measurement systems in X, Y, Z1 axes - coolant pump 6 bar; 20 l/min, plug-in screen filter 10 µm filtration - cooling system for spindle motors, motor console, turning-milling spindle, B-axis torque motor - CNC control with ERGOline operating panel (manufacturer and type per control description) - USB interface, Ethernet interface CNC Control: SIEMENS Sinumerik 840D solutionline with ERGOline Control, SINUMERIK Operate and ShopTurn 3G, Linux OS at no extra cost Tool chain magazine for 120 tools replaces disc-type magazine (36 tools), HSK-A 63 DNI 69893 interface, - only with Siemens control - Mechanical oil mist separator 100 m³/h, filter class H13 Chuck flush device at the main spindle, external, Coolant supply through turning spindle Tropical package for machine environment temperatures up to 40°C, consisting of control cabinet cooling unit (up to 40°C) B-H7080 workpiece touch probe, BLUM, with Quickstart cycle package including probe TC60 with transmitter and receiver unit, HSK 63A tool interface, 1 stylus, measuring cycles B-Z0908 3D data model of the specified machine workspace in Step and IGES format. Delivery of the 3D data model on CD. B-L7000 Standard electrical interface Profibus Handheld control unit: Axes X1Y, 1, Z1, C1, B1, X2, Z2, Z3, C3, C4 can be jogged and moved incrementally using the handwheel. Emergency stop and feed override functions are available on the handset. Tailstock feed force increased to 20kN. SK-2014-3518 The tailstock is supplied without quill bearing to allow fitting of a twist-proof pressure device. When used as a tailstock, a rotating center must be used. Coolant cleaning system: - Filter unit type: FK 20 * Filter performance 20 l/min * Filter medium: filter fleece PN100/100 - Coolant tank 950l type: FKA/950 - Magnetic roller type: MW180 - Process pump 5 bar (50 l/min) - Process pump 20 bar (40 l/min) with DBV 20/40 - Control cabinet Chip conveyor type 300 S-2: - Wear-resistant version (guides and base plates made from XAR) - Return pump 1.2 bar (100 l/min) etc. The full equipment and further technical data can be found in the documentation, which we are happy to provide on request. The machine has always been serviced by Gildemeister customer service and is in technically perfect condition. It can be inspected under power and during production. Dimensions & weight: (LxWxH) Machine CTX Gamma DL 125 – 580x280x285 cm, 20,000 Kg Chip conveyor 670x125x160 cm, 1,000 Kg Total weight incl. accessories 22,605 Kg Number of packages 11 Loading meters: 21 Dismantling, removal, shipping, and reinstallation can be organized. Itedpfxey Axuxs Aa Ish

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm Iedpfx Aev Drigea Isth z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: ready for operation (used), Year of construction: 2005, operating hours: 21,600 h, functionality: fully functional, machine/vehicle number: 80439430900, turning diameter over cross slide: 465 mm, turning diameter: 680 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, distance between centers: 1,150 mm, TECHNICAL DETAILS Max. spindle speed: 3,500 rpm Centre distance: 1,150 mm Centre height: 360 mm Z-axis travel: 1,050 mm X-axis travel: 300 mm Swing diameter over bed: 680 mm Swing diameter over cross slide: 465 mm Rapid traverse Z-axis: 30 m/min Rapid traverse X-axis: 30 m/min Linear axis X and Z measuring system resolution: 0.001 mm Max. workpiece weight between centres: 350 kg Centre taper: MK 5 MACHINE DETAILS Iedeyw H E Uspfx Aa Ijth Operating voltage: 400 V Frequency: 50 Hz Operating current: 80 A Machine weight: 7,500 kg EQUIPMENT Röhm power chuck (Röhm Duro-NC 260/3) Tool holders

Condition: excellent (used), Hello, I have for sale a DMG GILDEMEISTER CTX 310 V3 CNC LATHE with driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control system: Heidenhain Data Pilot 4290 Country of origin: Germany Year of manufacture: 2003 - Total machine operating hours: 9,144 h Machine specifications: - Turret: 12 tool positions for VDI-30 holders + TurnPlus attachment - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Hydraulic tailstock - Through-spindle - Max turning diameter (X-axis): 190 mm - Max turning length (Z-axis): 455 mm - Cooling system - SMW AutoBlock three-jaw hydraulic chuck - Spindle bore diameter: 50 mm - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 3.8 t - Loading included in the price The machine has undergone a full service inspection. 100% operational. Connected and ready for work. Iodey Rb H Hjpfx Aa Ieth Stal-Com has been engaged in sales, service, and training on DMG group CNC machines for 19 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. Every machine undergoes a meticulous technical check. Apart from Polish customers, our machines are also purchased by clients across Europe and parts of Asia. Each machine can be inspected in operation, as we also provide machining services. After purchasing a machine from us, we conduct operator training and can also set up production of parts at the customer's facility. We cooperate on a long-term basis with many companies, supplying them with further machine tools.

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 Itodpfx Aaey Rb Ecs Ijh The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.