Used Gildemeister Ct 20 for sale (247)

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Chodpfextr Iwsx Adxjd Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: good (used), Year of construction: 2006, Gildemeister Twin 42, Year of manufacture 2006, Siemens 840 D control, Turning length up to 210 mm, Spindle bore 56 mm, Chedpfx Adjwcyhtsxod Main spindle, Counter spindle, 1 x Y axis, 2 x C axis, 2 12-station turrets / all stations driven, Shaft diameter 25 mm, Driven tools up to 6,000 rpm, FMB Turbo 10-72 loading magazine, Main spindle collet chuck, Counter spindle collet chuck

Condition: used, Year of construction: 2001, functionality: fully functional, Turning / Milling / Drilling Center Manufacturer: Gildemeister Model: TWIN 500 Year of manufacture: 2001 Control: SINUMERIK 840 D Max. swing diameter: 610 mm Max. longitudinal travel: 1470 mm Tool holder: Spindle HSK A62 Milling spindle speed: 12,000 rpm Turning spindle speed: 20 - 3,200 rpm Rapid traverse speed: X = 46 m/min, Y = 24 m/min, Z = 60 m/min Milling spindle power: 15 kW Turning spindle power: 74 kW Chip conveyor: 150 kg/h The machine is still under power and can be inspected. Parts for the aerospace industry have been produced with this machine. The machine undergoes regular maintenance. Chodpfxoxq Tkue Adxod All information subject to change. Available ex foundation. Prior sale reserved.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Cjdpoxmd Txjfx Adxehd Number of spindles: 6 Pcs Guide rod length: 3,3 m

Condition: excellent (used), Monitor Display (108142) Chjdpfx Aeigqr Hsdxjd Make DMG Gildemeister Type Supply 11098, I.D.-No.259284 Monitor was taken from a mechanically defective machine function was tested

Condition: like new (used), Year of construction: 2011, operating hours: 80 h, Technical Data: Turning diameter: 350 mm Turning length: 650 mm Swing diameter over bed: 385 mm Swing diameter over cross slide: 350 mm Distance spindle nose – tailstock: 902.5 mm Main spindle: Speed range – main spindle: 0 – 4,000 rpm Drive power – main spindle: 15.3 / 11.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 87 mm Max. bar diameter: 52 mm Usable bar diameter: 52 (45) mm Max. chuck diameter: 250 mm Chuck diameter: 165 mm Spindle head: 170 h5 C-axis: 0.04° Turret: Number of tool stations: 12 pos. Shank diameter DIN 69880: 30 mm Driven tool stations: Number of driven tool stations: 6 pos. Speed range – driven tool stations: max. 4,500 rpm Cedpfx Aow Dqbaedxshd Drive power driven tool stations: 5.5 kW Travel: X-axis: 255 mm Z-axis: 800 mm C-axis Tailstock: Tailstock travel: 680 mm Tailstock taper: MK 4

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2007 Control : Siemens 840D - Powerline Turning diam. : 640 mm Turning length : 1185 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):28 kW Torque (max.):320 Nm C-Axis:0,001° Barcapacity:65 m Workpiececlamping:3-Jaw chuck, Hainbuch B-TOP 3 ø215 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):28 kW Torque (max.):320 Nm C-Axis:0,001° Workpiececlamping:3-Jaw chuck, Hainbuch B-TOP 3 ø215 mm Chodsxrw Uyopfx Adxsd Movement in Z:1.150 mm Rapid travers in Z:40 m/min Toolcarrier I (X/Y/Z/B): Technology:Millingspindle Speed:12.000 rpm Power (max.):22 kW Torque (max.):100 Nm Taper:HSK-A63 Movement in X/Y/Z:550/180/1.185 mm Rapid traverse in X/Y/Z:40/24/70 m/min B-Axis:240° Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VD40 Tooldrive:4.000 rpm, 11,7 kW, 28 Nm Movement in X/Z:180/1.050 mm Rapid traverse in X/Z:24/40 m/min In general: Technology:Shelfmagazin with Double-gripper Toolstations:80 Toollength (max.):200 mm Tool-ø (max.):80 mm Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter, Temperature control and high-pressure, 80 bar Workpiecemeasurement:Touchprobe, Marposs WRP 45 Toolbreakagecontrol:Mechanical Rawmaterial feed:Barloader, Breuning-Irtco ILS-RBK 10016 Finishedpart removal:Pick-up device at Turret andParts conveyor belt Oilmistseperator:Electrostatic Extraction, LTA AC 3001 Toolholder:Misc. used static and driven toolholder Further Accessory:Chiller, Rinsing pistol

Condition: good (used), Year of construction: 2008, Gildemeister GMX 250 linear, Year of manufacture 2008, Siemens 840 D control system, Max. bar capacity up to 65 mm, Adjustable axes X1/Y1 - 550/180 mm, Z1 - 1185 mm, B1 - 240 degrees, X2 - 180 mm, Z2 - 1050 mm, Z3 - 1150 mm, Chuck Ø 200/250 mm, Csdpfxswcf Ais Adxjhd 1 12-station VDI 40 turret, 46-station HSK 63 magazine, Counter spindle, B-axis NC swivel milling head, 9200 spindle hours, Extraction system, Belt filter, Internal coolant supply 20 bar,

Condition: used, Year of construction: 2008, turning diameter 250 mm turning length 1185 mm control Siemens 840 D total power requirement 21 / 28 kW Chodpexiy Dfefx Adxod

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840 D Main Drive Spindle speed range 7000 rpm Number of axis 7 Additional Equipment Double spindle version Y-axis Main and counter spindle Cedoxg Un Hjpfx Adxehd Collet chuck 1 attached tool axial 1 attached tool radial Belt filter system Loading magazine FMB Turbo 10-72 XT This 7-axis Gildemeister Twin 41 horizontal turning machine was manufactured in 2006. Ideal for precision and complex turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Gildemeister Twin 41 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis Chsdpfx Adoglf A Hsxjd SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2009, Ref. -No.: 10523 Manufacturer: DMG GILDEMEISTER Chsdpfxsw Upkmj Adxed Type: NEF 600 Year of construction: 2009 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Halberstadt Country of origin: Germany - Japan Turning Speeds: 4.000 RPM Tool holder type: VDI 40 DIN 69880 X stroke: 398 mm Y stroke: 1250 mm C-Axis: ° Turning Length: 1.200 mm Swing Diameter Over Bed Slide: 490 mm Spindle Diameter In Front Bearing: 160 mm Spindle Bore: 118 mm Spindle nose: 220h5 Spindle Speed Min.: 3.500 RPM Max. Torque: 790 / 590 Nm Rapid Travel Speed X-Axis: 30 m / min Rapid Travel Speed Z-Axis: 30 m / min Main Drive: 20 - 4000 kW Total Power Requirement: 50 kW Max. Rod diameter: 92 mm Spindle 1 chuck diameter: 315 mm Max feed rate: mm / min Power Capacity: 37 / 28 kW Turret places: 12 Pcs Machine length: 6500 mm Machine width: 3500 mm Machine Height: 2300 mm Weight Of The Machine Ca.: 5,3 t Further information: Tailstock: Tailstock displacement: 1,150 mm Clamping force: 12.5 kN Tailstock holder: MK 5 Machine is still in production and can be inspected at any time.

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 Cjdpoxa Epbsfx Adxjhd - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: good (used), Year of construction: 1999, Gildemeister MF Twin 65, year of manufacture 1999, Siemens 840 D control, travel X/Z 190/555 mm, 1 x Y axis +/- 40 mm, 2 turrets with 12 stations each, driven tools, VDI 30 mounting, C axis, spindle speed up to 6,000 rpm, max. bar capacity up to 65 mm, bar feeder is included but no longer installed on the machine. Codpfx Adjw Swcxoxjhd

Condition: used, Lathe Gildemeister Nef plus 500, year of manufacture 1996. Dimensions are approximately 3 m long, 1.70 m high, 1.5 m deep. Cedpjw E D Txofx Adxohd

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Codexf A Edepfx Adxohd Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: used, TECHNICAL DETAILS - Max. bar diameter : 12,7 [mm] - X stroke : 85 [mm] - Y stroke : 150 [mm] Chodpfx Ajuy Uywodxed - Z stroke : 160 [mm] - Spindle speeds : 12000 [rpm] - Number of axes : 5 EQUIPMENT - CNC : Fanuc 18 i-T - Bar loader : IEMCA CH 220 Type 32 L - Oil mist extractor : LTA Basic line 01

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, I am offering for sale a reputable brand CNC lathe: GILDEMEISTER MF Sprint 65 with driven tools, 2 x turrets + sub-spindle. _ Type: CNC Lathe Automatic Manufacturer: GILDEMEISTER Model: MF Sprint 65 Control: SIEMENS 840C Country of manufacture: Germany Year of manufacture: 1998 _ Machine specifications: Chsdpextniwefx Adxjd - Turret: 8 tool stations with VDI 30 holders (every second station is driven) - Turret: 8 tool stations with VDI 30 holders (every second station is driven) - Max revolutions: 5,000 rpm - SLIDE 1 - Cross / longitudinal travel: 155mm / 280mm - SLIDE 2 - Cross / longitudinal travel: 82mm / 120mm - C axis - Driven tools - Sub-spindle - Main spindle chuck: HAINBUCH BZI65 - Sub-spindle chuck: Dia. 125mm - Max bar diameter: Dia. 65mm - Part catcher - High-pressure cooling system - Chip conveyor - Bar feeder magazine: FMB Turbo 10-65XT - Spindle drive power: 21 kW - Documentation (DTR) - Machine weight: 6 tonnes _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We have our own stationary and mobile service teams - Over 700 DMG machines sold - Possibility of commissioning the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a comprehensive technical inspection and are 100% ready for work - Machine purchase possible via installment plan and leasing options _ www_ppmsc_pl _

Condition: excellent (used), Year of construction: 2017, operating hours: 20,000 h, functionality: fully functional, spindle speed (max.): 6,500 rpm, bar passage: 42 mm, bar diameter (max.): 42 mm, Production lathe Gildemeister Sprint 42 - 8 linear axes with high-pressure system and Iemca bar feeder Year of manufacture: 2017 Control: Fanuc 31i Operating hours: ~20,000h Chjdpsxbpp Usfx Adxjd Version with 8 axes – linear drive on X1 axis Main and counter spindle speed: 6,500 rpm Max. bar capacity: 42mm Coolant system: Slide 1: 8 bar Slide 2 + Y: 20 bar Bar feeder: Iemca BOSS 552/32 Parts conveyor belt

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm guide tubes 4,000 mm chip conveyor Chjdpfx Adjp Dux Tsxed

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Chsdexn R N Aopfx Adxjd

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 1850 kg Control Unit Brand FANUC Model 18i-T Csdpfx Adoxpyqrjxshd Main Drive Spindle speed range 8000 Number of axis 6 Movement X-Axis Movement 100 mm Z-Axis Movement 270 mm Additional Equipment Interface: RS232 / PCMCIA Rotating Guide Bush Parts Catcher Coolant Tank (plus additional coolant tank) Hydraulic Bar-Push Brand/Type: FNB Turbo 3-26 Additional Turning Tool Holders This 6-axis Gildemeister GLD 25 swiss type turning machine was manufactured in 2003. It features a GE Fanuc Series 18i-T control, a maximum rpm of 8000, and can handle bar diameters up to 25mm. Equipped with a rotating guide bush, parts catcher, and additional coolant tank, it offers robust capabilities for precision turning. If you are looking to get high-quality turning capabilities consider the Gildemeister GLD 25 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 1,200 mm, turning diameter: 600 mm, Heidenhain plus IT CNC control 8 fold turret head 3-jaw chuck 315mm diameter tailstock coolant device chip conveyor Technische Daten / technical details: max. Drehdurchmesser über Bett / max. turning diameter over bed 600 mm max. Drehdurchmesser über Schlitten / max. turning diameter over sledge 410 mm max. Drehlänge / max. turning length 1200 mm Planweg (x) / cross way (x) 320 mm Längsweg (z) / longitudinal way (z) 1250 mm Csdpfxswnwz Uo Adxshd Drehzahlbereich / spindle speed 3000 UpM /rpm Werkzeugrevolver / turret head 8 fach /holes Reitstockaufnahme / tail stock taper MK 5 Eilgang X/Z / rapid feed X/Z 15 m/min. Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 24/18 kW Gewicht der Maschine ca. / weight 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Gildemeister lathe with Heidenhain control system Good condition, fully functional. Can be inspected and tested on site. Shipping also available internationally. Inspection: Chsdpfx Adsxiv Aksxed Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid any uncertainties. If you have general questions or wish to arrange an inspection, I am available at the phone number provided below or above at any time. Subject to prior sale and errors in the description. VAT is shown separately on my invoices. Shipping by freight forwarder.

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed 560 mm Swing diameter over cross slide 250 mm Spindle bore 65.3 mm Power Max. 15 KW Speeds 11.2 - 2,240 rpm Centre width 1,000 mm Quill diameter 80 mm Quill mount MK 5 Chsdpovn Rlzefx Adxsd Incl. chip conveyor Incl. complete documentation