Used Gastl Rg 200 for sale (60,040)

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Hfedpetpp H Eofx Ag Uob

Condition: good (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,000 kN, column diameter: 55 mm, Two-component injection molding machine Year of manufacture 2003 Operating hours 52,800 Clamping force 200 tons Screw diameter 55 mm – horizontal injection unit Screw diameter 35 mm – vertical injection unit Hsdpfxsw A Nz Nj Ag Ujfb Equipment: 2 core pulls, Euromap 12

Condition: good (used), Year of construction: 2016, operating hours: 13,879 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, The machine is in decent condition and is equipped with a 3-position rotary table (3x120°) Year of manufacture: 2016 Operating hours pump: 17,263 Operating hours production: 13,879 Location: Southern Germany Contrary to the specification, the light curtain is not installed, as we operated the system with an enclosed automation (see photos). However, the components of the light curtain are available and will be sold with the unit. The part-specific automation and the feed hopper shown in the photo are not for sale. It is technically possible to convert the system to a 2-position rotary table (2x180°). This could be ordered by the buyer directly from Arburg after purchase. Ex works sale Hedpswnfw Dsfx Ag Uefb

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and Hsdpfx Ajvkqfajg Usfb is supplied incl. Multilift H. Operating hours: 42878h

Condition: excellent (used), Year of construction: 2005, operating hours: 80,000 h, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 1,650 bar, injection weight: 434 g, Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General information Product Code: 193 Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 434 g Clamping Force: 2,000 kN Screw dia: 55 mm Injection pressure: 1650 bar Tie bar distance: 520x520 mm Platen size: 728x728 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 80000 h Hedpsvt Tp Hofx Ag Uefb Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core pull: Yes Euromap: Yes

Condition: good (used), Year of construction: 1985, functionality: unexamined, total width: 2,100 mm, total length: 4,150 mm, total height: 1,100 mm, overall weight: 7,200 kg, type of input current: AC, 2 pieces electromagnetic overband magnetic separators. 1 piece is overhauled ! Manufacturer: SKET Magdeburg Type: EMHB 1200 / 1700-L Connection cable: 7,0 kW Weight: 7200 kg Dimensions Length: 4100 mm Width: 2100 mm Height: 1100 mm For conveyor belt systems with a belt width of up to 1200 mm. Belt speed up to a maximum of 2.09 m/s Automatic cleaning The electromagnetic overbelt magnet with automatic cleaning is installed above the conveyor belt and enables quick and easy separation of magnetic particles from the conveyed material. This separator is primarily used in applications with a high occurrence of ferromagnetic particles, where separation with manual cleaning would not be suitable due to the high level of contamination. Compared to permanent overband magnetic separators, the magnetic field of electromagnetic plates is much stronger and deeper. Electromagnetic magnetic separators are ideal for collecting parts with difficult shapes (such as screws, nuts, balls, etc.) and heavier iron parts. The extremely strong electromagnetic field also ensures the separation of ferromagnetic particles that are located under a higher layer of the flow. The electromagnet is also an exclusive solution for applications where it is necessary to deactivate the magnetic field for operational or maintenance reasons (which is not possible with the permanent magnet). Contributions of the separator application purified material (without ferromagnetic impurities) Permanent protection of technological systems continuous production operation Hfsdpfx Asu Imz Njg Ueb automatic cleaning without interrupting the material flow minimization of operating effort and costs due to production downtime

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Hfjdsum U S Eepfx Ag Ueb

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools Hfjdpfx Aswbilxeg Uob This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: excellent (used), Year of construction: 2008, operating hours: 56,000 h, For sale: Arburg 570-2000-800 injection moulding machine, year 2008. In very good technical and visual condition, operates very quietly, no oil leaks. Selogic control system. Bimetallic injection unit, 45 mm diameter. 1 x air, 2 x hydraulic core, robot interface. The machine is sold without material or colour additive feeders. Hfedpfx Asukirbsg Ueb

Condition: like new (used), Year of construction: 2000, Injection molding machine Arburg 520C 2000-675 Year of manufacture: 2000 Closing unit Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Hfodpfx Ajq Tbdkog Ujb Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electric-hydraulic equipment Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Condition: excellent (used), Year of construction: 1998, operating hours: 94,737 h, clamping force: 2,000 kN, screw diameter: 60 mm, injection pressure: 1,440 bar, injection weight: 427 g, Arburg 470C-2000-675 (Nr. 40) without picker Year of production: 1998 TECHNICAL DATA Screw Dia [mm]: 60 Shot Weight [g]: 427 Injection Pressure [bar]: 1440 Clamping Force [kN]: 2000 Tie Bar Distance [mm]: 470x470 Platen Size [mm]: 715x715 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Hfedpfx Agovt Tb As Usb Monitor: Yes Control Cabinet: Yes Language: Polish, German OTHER Power [kW]: 45,8 Workinghours [h]: 94737 Weight [kg]: 6630 EUROMAP

Condition: ready for operation (used), Year of construction: 2003, operating hours: 230 h, 8 colors Perfector 4/4 Minimum format straight printing : 21 x 28 cm Hsdpoxlm S Ijfx Ag Ujfb Minimum format perfecting mode : 30 x 28 cm Maximum format: 53 x 74 cm Maximum print format 51 x 74 cm Thickness: 0.03 - 0.6 mm 230 million impressions CP 2000 Alcolor Vario Autoplate Combination device dampening circulation and cooling Ink temperature control air-cooled Ink unit washing device Technotrans Blanket cylinder washing device Chromed blanket cylinder PerfectJacket High pile delivery Antistatic device Eltex

Year of construction: 1998, operating hours: 62,144 h, condition: ready for operation (used), Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025. Hfjdpfx Aov Ifwxsg Uob

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Hsdpfx Agowbille Uefb Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Year of construction: 2023, condition: new, APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - scafa gutters - roadway gutter covers Hfsdpfxsht Uwpo Ag Ueb ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pallet discharge line with freshly moulded products - Hydraulic unit - Electrical control panel with PLC. TECHNICAL FEATURES: - Pallet dimensions: 1240x750x45mm - Useful surface: 1100x630mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Cycle time: 35 - 60 seconds - Total Installed power: 30,00 kW MAIN DIMENSIONS : - Width: 2,10m (without hydraulic unit and control panel) - Length: 8,00m - Height: 3,10m - The hydraulic unit and control panel are placed at the side, at a distance of 1.00m from the chassis and occupy a surface area of 2m2. - Machine mass 6,000 kg

Condition: excellent (used), Year of construction: 2000, Arburg 520C 2000-675 injection molding machine Electric screw drive Year of manufacture: 2000 SELOGICA control system Closing unit Closing force [kN] 2000 Clamping plate dimensions (hxv) [mm] 685 x 685 Clearance between columns (hxv) [mm] 520 x 520 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 353 Injection weight [g] 297 Injection pressure [bar] 2080 Electric-hydraulic equipment Hodpsrhkn Sjfx Ag Uefb Pump motor power [kW] 30 Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 6.63 Dimensions (L x W x H) [m] 5.35x1.93x2.20

Condition: excellent (used), Year of construction: 1998, clamping force: 2,000 kN, screw diameter: 45 mm, injection pressure: 2,500 bar, injection weight: 240 g, mold height (min.): 250 mm, Arburg 520C-2000-675 (154) without hopper General information Product Code: 154 Availability: In Stock Year of production: 1998 Brand: Arburg Hfjdpfxsvtzmts Ag Usb Technical data Shot Weight: 240 g Clamping Force: 2,000 kN Screw dia: 45 mm Injection pressure: 2500 bar Tie bar distance: 520 x 520 mm Platen size: 715 x 715 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 126766 h Weight: 6630 kg Dimensions: 5,6 x 1,7 m Euromap: Yes Air valve: Yes

Condition: used, mileage: 158,357 km, power: 107 kW (145.48 HP), first registration: 05/2010, fuel type: diesel, wheelbase: 3,450 mm, fuel: diesel, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 6,200 mm, total width: 2,350 mm, total height: 2,950 mm, Year of construction: 2010, Equipment: power assisted steering, power mirror, = Additional options and accessories = - 12-volt power socket - Heated exterior mirrors Hfsdpfx Agsx A Akue Ujb - Radio = Further information = Number of cylinders: 4 Engine displacement: 2,998 cc Unladen weight: 2,645 kg Payload: 855 kg Gross vehicle weight: 3,500 kg APK (Dutch technical inspection): valid until 05/2026 Registration: 6-VHN-46 Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: ready for operation (used), Siemens 1FK7101-2AF71-1RG1 synchronous motor SN: YFP6640520802002, professionally completely overhauled and tested, 100% functional, scope of delivery as per photos Hjdpfx Aslq N R Heg Uefb

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Hjdpfx Aewa I Sheg Usfb Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: excellent (used), mileage: 272,000 km, power: 280 kW (380.69 HP), first registration: 06/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 10,620 mm, loading space width: 2,550 mm, Year of construction: 2012, Equipment: ABS, AdBlue, central locking, differential lock, tail-lift, Technical Information Number of cylinders: 6 Transmission Hfedew Taxlspfx Ag Usb Transmission: ZF, automatic Axle configuration Brakes: Disc brakes Front axle: Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: leaf spring Rear axle: Differential lock; Tire tread left: 60%; Tire tread right: 60%; Suspension: air suspension Weights Unladen weight: 9,315 kg Payload: 9,685 kg Gross vehicle weight: 19,000 kg Functional Tail lift: D'Hollandia 1500, tuck-under platform, 1500 kg capacity Condition Technical condition: very good Visual condition: very good Damages: none Further Information Please contact Luc Schoefs or Germain Daenen for further information.

Condition: ready for operation (used), Fanuc 0551416 reduction gear for Robot R-2000iA 125L - diameter: 180mm, used, normal signs of use, 100% functional, scope of delivery as per photos Hjdpfx Agor Nqr Ie Uofb

Condition: ready for operation (used), Fanuc 0550544 Reduction gear for Robot R-2000iA 125L - Diameter: 275mm, used, normal signs of use, 100% functional, scope of delivery as per photos Hjdpfxsr Nqryj Ag Usfb

Condition: new, Siemens 1FK7060-2AF71-1RG1 - Z Synchronous motor SN:YFJ7636918802001, Z= Q31: Metal rating plate instead of adhesive plate, unused in opened original packaging, 100% functional, scope of delivery as per photos Hfsdpfx Agoul Ikxs Ujb

Condition: ready for operation (used), Fanuc 0550544 Reduction gear for Robot R-2000iA 125L - Diameter: 340mm, used, normal signs of use, 100% functional, scope of delivery as per photos Hfjdpfsr Nqr Dex Ag Uob