Used Flat Bed Die Cutting for sale (32,599)

Condition: excellent (used), Year of construction: 2001, Erba Titan 4 with Zenari automatic feeder and stacking system Year: 2001 Max format: 100 x 140 cm Pneumatic clutch Max speed: 1200 sh/h Automaticc feeder and unloading Zenari (2002) Stacking system In production Available immediately. Redpfxou Dph Do Aa Eol

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, year of last overhaul: 2015, BOBST AUTOPLATINE SP1420E-600T Rebuilt in 2015 by CELMACCH Italy (including software updates, full sensors calibration, and third side lay instalation etc). Machine in production and can be inspected in Bucharest, Romania. The buyer will take the responsibility for dismantling, packing and loading. Specifications Net weight:25,5 tons. Rodpewc Td Ijfx Aa Eel Connected load: 31 kVA. Main motor power: 11 kVA. Production speed: 4500 sheets/ hour. Impressional strenght: 500 tons. Sheet size (min/ max): 1420/700 x 1020/500 mm. Max. cutting size with front and side waste: 1410 x 1005 mm. Max. cutting size without front and side waste: 1420 x 1017mm. Gripper margin adjustable from 10 to 18 mm. Die cutting material: paper, cardboard, corrugated board.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Rodpfxodzqmzs Aa Esl Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Year of construction: 1988, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1624, For sale: Two identical WUPA PS 6.2 punching machines On request, we offer two identical punching machines of the type WUPA PS 6.2 for sale. One of the machines was completely overhauled in 2020. All essential components were renewed – including gripper punches, gripper chains, the platen, as well as all ball bearings. The machine has been in excellent condition ever since. The electronics have not been rebuilt or changed. Everything is original. Documentation is complete. Both digital and analog, we have circuit diagrams and exploded drawings. Rodpfx Aaewnfgrj Eel Technical data: Model: WUPA PS 6.2 Year of manufacture: 1979 Max. sheet size: 1,450 x 1,050 mm Min. sheet size: 600 x 400 mm Max. capacity: 4,000 sheets/h Max. cutting force: 350 t Material thicknesses: – Paper from 80 g/m² – Cardboard up to 2,000 g/m² – Corrugated board up to EB flute Equipment: – Non-stop feeder – Non-stop delivery Note: All information provided without guarantee. Subject to errors and prior sale. If you are interested or have any questions, we will be happy to assist you. Best regards

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2024112326, CUT-CREASE-FOLD Rjdpfx Aaox Ezk Ij Esl Max cut size - 600*900mm Operating mode - Vacuum absorption Cutting accuracy - 0.01mm Head - 2 blade heads Repeat Accuracy - 0.05mm Maximum uncut running speed - 800mm/s Max cutting speed - 700mm/s Force - 2000g Output modes - U disk/WiFi/USB Power

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request Rjdpfx Aasv T T N He Eel

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW Rsdpfx Aaekdnv Te Ejl - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or maintenance backlog. The electronics have not been modified or altered. Everything is still original. Documentation is complete. We have circuit diagrams and exploded views for both digital and analogue systems. All frames and pins are present to utilize the machine's functions, especially for the stripper, blank separator, and lower stripping station with pins. There is a quick-clamping system so that the stripper, for example, does not need to be secured separately. If interested, additional pictures or videos can be sent. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Rodpfx Aajwk I Iqj Eol Max. speed: 8000 sheets/h Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop stacker Side guide Quick-release lock We can assist with disassembly, assembly, and transport. Special feature: The machine is raised by approximately 100 mm, eliminating the need for a pit in production! The raised frame can be removed without tools and is not permanently attached to the machine. Please feel free to contact us with any further questions. Best regards

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Single-blade spiral roller chip separator Chips discharged into a trolley Redpfx Aev I D Shea Eol Main product on the feed roller table

Condition: used, mileage: 288,582 km, power: 310 kW (421.48 HP), first registration: 04/2018, fuel type: diesel, empty load weight: 14,650 kg, maximum load weight: 11,350 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, next inspection (TÜV): 04/2024, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,500 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Complete documentation available * Hiab rear crane type 177K Hipro * with radio remote control * hook height 14m * Crane length: 10.8 m = 1.560 Kg. * 8.1 m = 2,100 Kg. * 5.5 m = 3,200 Kg. * 4.2 m = 4,100 kg. * 5th + 6th control circuit * Stone tongs available at an extra charge Rodovhp Egjpfx Aa Ejl * 2 hydraulic outriggers * Platform body with high aluminum loading flaps * Screen printing floor * DIN lashing eyes * High bulkhead * Platform dimensions: 6.50 m x 2.55 m x 1 m * Trailer coupling * Gross train weight: 44,000 kg * Automatic gearbox * Multifunction steering wheel * Cruise control * Air conditioning * Retarder * Lane departure warning system * Bluetooth CD radio * Comfort driver's seat, air suspension * Heated seats * Electric windows * Heated electric mirrors * Air suspension + raise/lower * Liftable trailing steering axle * Storage box * Rotating beacons * Working lights * Wheelbase: 4,900 + 1,350 mm * Max. gross vehicle weight: 26,000 kg * Unladen weight: 14,650 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 1999, condition: ready for operation (used), Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible. Rodpjwty Eajfx Aa Eol

Condition: new, Year of construction: 2023, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Redpsrzakmjfx Aa Ejl Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: used, mileage: 130,200 km, power: 265 kW (360.30 HP), first registration: 12/2009, fuel type: diesel, empty load weight: 9,700 kg, maximum load weight: 8,300 kg, overall weight: 18,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 2,550 mm, total width: 3,600 mm, loading space length: 4,500 mm, loading space width: 2,470 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, trailer coupling, Vehicle location: Bovenden, aluminum body, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, radio-CD, cruise control, ABS (anti-lock braking system), constant throttle, exhaust raised, automatic, lifting + lowering, differential lock, rotating beacon, leaf-air suspension, AHK air + light, low-noise G1, winter service equipment, environmental badge green Wheelbase: 3900 mm 9.0tn VA axle 385/65R22.5, winter service equipment! Winter service mounting plate is not yet fitted but is available loose! Approx. 25,000.00€ were invested in repair work (cab etc.)! As this was damaged in an accident! Engine like 18.440 with 10.518m³ In 07/2022 the gearbox was repaired for approx. 5.000,00€! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! Redjvhhn Topfx Aa Esl - .

Condition: used, machine/vehicle number: 33573, empty load weight: 6,870 kg, maximum load weight: 28,630 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 05/2024, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,690 mm, suspension: air, tire size: 385/65 r22,5, color: yellow, Year of construction: 2018, Equipment: ABS, Vehicle at Waidhaus site Vehicle has Redpsmiiuksfx Aa Ejl BPW EAC, EBS, RSS, EEC Edscha sliding roof 2-leaf portal doors 2 spare wheel holders Anti-theft tarpaulin Load securing EN12642 XL + DC 9.5 4 x 2 ferry fittings/rings for RoRo transports

Condition: used, Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 1 1/4" inches -Cutting tips: 7 -Transport case Redschlx Nepfx Aa Eel -Weight: 9.8 kg

Condition: new, Fronius RCU 5000i compatible with Fronius TPS 2700 / 3200 / 4000 / 5000 / CMT Remote Control Unit (RCU) for Fronius welding machines: - Adjust welding parameters such as current, voltage, and wire feed speed conveniently from the work area without having to go directly to the welding machine Rodpfx Ajwbiacsa Esl - Intuitive display, easy to use - Upload characteristic curves AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE Viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping is no problem! ✔

Condition: used, machine/vehicle number: ZCFA75D040256xxxx, mileage: 116,575 km, Year of construction: 2010, Please contact ATS Norway for more information Rjdpfxowdvano Aa Ejl Please provide reference number upon request: 20215 Specifications: Model year: 2010 116,575 km EU inspection valid until 17.09.2025 Euro 5 engine Manual transmission 177 hp 4x2 Front suspension: steel Rear suspension: steel Tires (see photos) Exterior handle on passenger side not working One side pillar cannot be dismantled (rusted in place) Air conditioning Lights Radio Ready for delivery Description:We have a 2010 Iveco Eurocargo 4x2 flatbed truck for sale.Warning light on dashboard is reportedly related to exterior lighting.Some maintenance should be expected.Ready for delivery. Km: 116575 HK: 177 Technical approved: no EU-approved until: 17.09.2025 Own weight: 3920 Total Weight: 7490 Payload: 3495 Width: 254 Length: 595 Euro: 5 Model: EUROCARGO 4x2 Planbil Gearbox: Manual

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 80,000 mm, loading space width: 25,600 mm, loading space height: 36,000 mm, Year of construction: 2024, Equipment: crane, The Mercedes-Benz Atego 1725 A 4x4 flatbed truck with Hyva HB120 crane is a robust and versatile commercial vehicle, designed for use in demanding operational environments. This truck is ideal for applications in construction, mining, agriculture, or infrastructure projects where on-site loading and unloading are essential. KEY FEATURES: - ENGINE: Equipped with a powerful 6-cylinder engine delivering 245 HP (180 kW). The Atego 1725 A provides ample power for both heavy-duty transportation and crane operations on the job site. - DRIVELINE: Featuring selectable all-wheel drive, high ground clearance, and reinforced suspension, this truck is fully prepared for off-road use, even in the toughest conditions. - OFF-ROAD TIRES: Thanks to all-terrain tires and 4x4 drive, the Atego reliably reaches its destination, whether through mud, sand, or rough terrain. BODY: FLATBED WITH HYVA HB 120 CRANE Flatbed - Steel loading platform with anti-slip surface - Perimeter lashing points for secure load securing - High payload capacity, suitable for heavy equipment and bulk materials - 360° fold-down sidewalls for easy loading and unloading Hyva HB 120 Crane - Mounted behind the cab - Max. lifting capacity approx. 12,000 kg - Max. hydraulic outreach approx. 12 meters - Hydraulic extension sections - Outriggers for stable crane operation - Manual control panel The Mercedes-Benz Atego 1725 A 4x4 flatbed with crane is ideal for professionals in: - Construction & Infrastructure: On-site loading and unloading of building materials. - Mining: Supporting the transport and installation of components. - Agriculture: Suitable for moving machinery, livestock feed, and containers over muddy or uneven ground. - Public services & aid organizations: Rapid deployment for disaster relief and reconstruction projects. = Further Information = General information Year of manufacture: 2024 Transmission Transmission: G 85-6/6.7-0.73, 6-speed manual gearbox Functional Mast: Telescopic Mast length: 1.213 m Lifting capacity: 12,000 kg Body make: Hyva HB120 Condition Overall condition: very good Rsdpfx Aasxnbpye Ejl Technical condition: very good Visual condition: very good Damage: none

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/2024, total length: 78,000 mm, total width: 25,500 mm, total height: 35,800 mm, suspension: air, tire size: 365/65R22,5, wheelbase: 6,040 mm, color: white, Year of construction: 2024, General Information Applications: Construction, Demolition, Earthmoving, Forestry, Horticulture, Internal Logistics, Mining and Parking Management Registration Number: OV-18-FK Axle Configuration Tyre size: 365/65R22.5 Axle brand: Goodyear Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 10,000 kg Rear axle 2: Alloy wheels; Max. axle load: 10,000 kg Rear axle 3: Alloy wheels; Max. axle load: 10,000 kg Weights Unladen weight: 7,420 kg Payload: 34,580 kg Gross vehicle weight: 42,000 kg Functional Tipper: Rear Condition Technical condition: very good Visual condition: very good Rodpfx Aasx Np Nye Ejl Product Safety Manufacturer: AJK Nederland Borkel en Schaft, NL Further Information Please contact Maarten van Marion for more information. = Company Information = View our complete range at:

Condition: used, mileage: 986,000 km, power: 338 kW (459.55 HP), first registration: 09/2011, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 8x4, wheelbase: 7,350 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 10,900 mm, total width: 2,550 mm, Year of construction: 2011, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, parking heater, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Lift axle - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Power take-off (PTO) - Towing hitch = Further information = Technical information Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Front axle 1: Tire size: 385/55 R 22.5; Steerable; Tire tread left: 20%; Tire tread right: 20%; Suspension: Leaf spring Front axle 2: Tire size: 305/70 R 22.5; Twin tires; Tire tread inside left: 60%; Tire tread outside left: 60%; Tire tread inside right: 60%; Tire tread outside right: 60%; Reduction: single reduction; Suspension: Air suspension Rear axle 1: Tire size: 305/70 R 22.5; Twin tires; Tire tread inside left: 30%; Tire tread outside left: 30%; Tire tread inside right: 30%; Tire tread outside right: 30%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 385/55 R 22.5; Steerable; Tire tread left: 15%; Tire tread right: 15%; Suspension: Air suspension Rsdpfjxwufysx Aa Eol Weights Kerb weight: 20,335 kg Payload: 15,665 kg Gross vehicle weight (GVW): 36,000 kg Functionality Crane: GORMACH 3400 E6, year of manufacture 2010, mounted at the rear of the chassis Platform height: 115 cm Condition Damages: none

Condition: new, mileage: 815 km, power: 390 kW (530.25 HP), first registration: 06/2024, fuel type: diesel, tire size: 385/55/22,5, axle configuration: 6x2, fuel: diesel, brakes: intarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,750 mm, loading space width: 2,480 mm, Year of construction: 2024, Equipment: ABS, AdBlue, Apple CarPlay, EBS, air conditioning, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, soot filter, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Aluminum fuel tank - Differential lock - High beam headlights - Speed limiter - Air conditioning - Refrigerator - Air suspension - Air horn - Particulate filter - Disc brakes - Sun visor - Auxiliary heater (parking heater) - Toolbox - Power take-off (PTO) - Central lubrication - Towing hitch = Further Information = Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55/22.5; Max. axle load: 8,000 kg; Steered Rear axle 1: Tire size: 315/70/22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg Rear axle 2: Tire size: 385/55/22.5; Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 17,780 kg Payload: 9,220 kg Gross vehicle weight (GVW): 27,000 kg Functionality Mast: Telescopic (7 sections) Mast length: 20.8 m Lifting capacity: 8,300 kg Body manufacturer: HIAB 258-E7 LK CE marking: yes Condition Overall condition: very good Redpfx Aaewy U Aas Eol Technical condition: very good Visual condition: very good DAF XF 530 flatbed truck with loader crane HIAB X-HIDUO 258 E-7 and winch Features: ABS, adaptive cruise control, EBS, ESP, particulate filter, retarder, parking heater Vehicle Description: DAF Luxury Plus Infotainment System 10.1-inch touchscreen display Navigation, Weblink, DAB, Bluetooth, 5 speakers Daf Connect online fleet management Fully digital instrument cluster On-board computer with multifunction steering wheel Preparation for reversing camera, cooling box Driver's seat with heating and ventilation LED headlights EURO 6 L PACKAGE 530 HP DRIVELINE 6X2 3rd LIFT AXLE AIR SUSPENSION WHEELBASE 460 CM DIFF LOCK AUTOMATED TRANSMISSION WITH IMPROVED ENGINE BRAKE XF SLEEPER CAB WITH 2 BEDS AIR CONDITIONING, REFRIGERATOR, TELEPHONE, NAVIGATION CARGO AREA LENGTH 675 CM WIDTH 248 CM HEIGHT +/- 120 CM TOOLBOXES TRAILER COUPLING HIAB X-HIDUO 258 E-7 CRANE + WINCH TOTAL 7X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS WORKING HEIGHT 20.8 METERS HYDRAULIC OUTREACH 18.6 M MAXIMUM LIFTING CAPACITY AT 2.5 METERS 8,300 KG MAXIMUM LIFTING CAPACITY AT 18.6 METERS 660 KG 2X CRANE JIBS

Condition: ready for operation (used), Philips hand control unit for Maho control CNC 532 / 432, used, normal signs of use, 100% functional, scope of delivery as per photos Rjdpfx Aoi Eckfsa Ejl

Condition: new, axle configuration: 3 axles, total length: 125,000 mm, total width: 24,800 mm, suspension: steel, tire size: 315/80 R 22.52, color: white, Year of construction: 2024, The 3-axle flatbed trailer from CIMC is a robust and versatile solution for transporting large, heavy, or irregularly shaped loads. Featuring three axles, this trailer offers exceptional stability and load capacity, which is essential for hauling building materials, machinery, containers, and other heavy cargo. CIMC is renowned for its innovative designs and reliable products, and the 3-axle flatbed semi-trailer is no exception. Specifications: - Number of axles: 3 axles for additional stability and increased payload. - Payload capacity: Up to 60,000 kg for a wide range of applications. - Chassis: Constructed from high-quality steel for maximum strength and durability. - Body: Flat deck without raised edges. - Suspension: Mechanical or air suspension systems for a smooth ride and improved load distribution. Features and Benefits: High payload capacity: - The 3-axle configuration ensures excellent weight distribution and increases loading capabilities. - Ideal for heavy and bulky cargo such as construction equipment, containers, and industrial machinery. - Durable construction: The chassis is manufactured from premium-grade steel, providing durability to withstand demanding daily operations. - Advanced welding technology guarantees a robust and dependable structure, significantly extending the trailer’s service life. Applications: The CIMC 3-axle flatbed semi-trailer is ideal for multiple applications, including: - Construction: Transport of heavy building materials, machinery, and equipment - Logistics and distribution: Hauling containers, pallets, and irregular loads Redpfx Asxnbxuoa Esl - Oil and gas industry: Transport of heavy and oversized equipment - Automotive industry: Delivery of vehicles and large machinery Dimensions: L. 12,500 mm W. 2,480 mm H. 1,200 mm Weight: 8,400 kg +/- 5% This 3-axle flatbed trailer by CIMC offers a rugged and flexible solution for businesses requiring a versatile and dependable trailer for transporting heavy and irregular cargo. Excellent stability, durability, and the ability to adapt to specific requirements make this trailer a valuable asset to any fleet. For export outside the EU only. = Additional information = Year of manufacture: 2024 Tire size: 315/80 R 22.5 Suspension: Leaf suspension Gross vehicle weight: 68,400 kg

Condition: ready for operation (used), Siemens control panel 3M = 548.025.9026.01 = 12" color, used, 100% functional Rsdpfx Ajxahlloa Esl

Condition: new, mileage: 1 km, power: 110 kW (149.56 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 150 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: air conditioning, = Additional Options and Accessories = - Radio/CD player - Spare wheel - Toolbox = Notes = The Mercedes-Benz Accelo 915 4x2 flatbed truck with drop sides is a compact and versatile vehicle, ideally suited for light to medium-duty transport tasks in urban and regional environments. Its maneuverability, fuel efficiency, and payload capacity make this truck an excellent choice for a wide range of logistics applications. Specifications: - Drive: 4x2 (two driven rear wheels) - Engine: 4.2-litre, 4-cylinder Euro 3 turbo diesel engine with 150 hp / 110 kW and 580 Nm - Transmission: Manual gearbox - Safety: Safety markings and side guards - Comfort: Spacious cab with adjustable seats, air conditioning, and multifunction steering wheel Cargo Bed: - Type: Flatbed with drop sides (foldable side panels for easy loading and unloading) - Dimensions: Body length from 5 to 6 meters, depending on configuration - Payload: Up to 4.5 tonnes, depending on load and specification - Material: Aluminum flatbed frame for maximum load capacity - Ergonomic: Low loading height for convenient loading and unloading Options and Customization: - Bed options: Additional lashing eyes and securing points for cargo - Safety: Reflective safety markings and side guards Applications: - Logistics and distribution: Suitable for goods delivery in urban areas - Agriculture: Transport of agricultural products or light machinery Redpfx Aox Nnqpoa Esl - Construction: For transporting building materials such as timber, bricks, etc. - Retail: Suitable for delivering goods to shops or markets Dimensions: L. 7134 mm W. 2148 mm H. 2480 mm The Mercedes-Benz Accelo 915 4x2 flatbed truck with drop sides offers reduced fuel consumption and lower operating costs, thanks to its efficient 4-cylinder turbo diesel engine—perfect for businesses with daily delivery requirements. Its tight turning radius makes this truck ideal for narrow city streets and confined loading areas, making it perfectly suited for urban distribution. = Further Information = Year of manufacture: 2025 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Max. axle load: 3200 kg; steered Maximum rear axle load: 6200 kg Number of cylinders: 4 Engine displacement: 420 cc Gross vehicle weight (GVW): 9,000 kg