Used Fireplace Template Fbu for sale (141)

Condition: excellent (used), Year of construction: 2022, Column-mounted slewing jib crane, Vetter, 1,500kg, 6m jib, 6m height – unused - : Price ex-location: only €13,950 (net)! Manufacturer: Vetter Model: Meister M Year of manufacture: 2022 Rated capacity: 1,500kg M15-6.0 Column-mounted slewing jib crane designed in accordance with the EC Machinery Directive, relevant EN 13001 standards, and VDE regulations, suitable for outdoor use (wind force 4, 20–28 km/h; moderate breeze). ID No.: 50010400 EN 13001 HC2 S3 HD2 Slewing range: 360° ∞ Max. permitted hoist weight: 180kg Max. permitted hoisting speed: 16m/min Jib outreach: 6,000mm Underside of jib: 6,000mm Overall height: 6,470mm Bolt circle diameter: 630mm Base flange diameter: 710mm Beam flange width: 180mm Front clearance: 250mm Inside clearance: 915mm Support strut length: 1,540mm Max. vertical load: 32kN Max. moment: 11,575kNcm Weight: 1,756kg Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Finish: Pipe column for outdoor use (corrosivity category similar to C3), steel grit-blasted with a coating in narcissus yellow RAL 1007, specified layer thickness 120 μm VETTER AnchorFix system: set includes anchor bolts, nuts, washers, locknuts, and steel template. Bolt circle (DL) ø 630 mm. Foundation edge length (G) 2,400 × 2,400 mm, foundation depth (Gt) 1,000 mm. Flat cable power supply with cable trolley, C-rail and tension arms for mounting on beam. Short weather protection canopy size 2, clamp-on for jib, provides shelter for hoist in idle position. Robust, hot-dip galvanized steel tube construction with weatherproof, plastic-coated tarpaulin, color rapeseed yellow RAL 1021. Mandatory for outdoor operation. Usable up to wind force 7. Dimensions (L × W × H): 1,320 × 1,520 × 1,042 mm Electric chain hoist VETTER type electrolift® SiXX Model: SiXX8F Mechanism group FEM 9.511 2m Mechanism group ISO M5 Number of falls: 2 Rated capacity: 1,500kg Lifting height: 5,351mm Headroom: 649mm Lifting speeds: 4 / 1m/min Hoisting motor: 1.45/0.36kW Duty cycle: 40/20% Dead weight: 65kg Protection class: IP55 Electric trolley type SiXX-EF-22-200 Ncodpfx Asyhxk Hsgwjp Travel speed: 24/6m/min Trolley motor: 0.2/0.05kW Duty cycle: 40/20% Dead weight: 19kg Flange width: 180mm Detailed operating manual and technical drawing available on request as PDF Previous new price: €18,436 (net) Condition: very good (this crane is new and unused – classic incorrect order) Availability: immediately Location: 30419 Hannover

Condition: good (used), functionality: fully functional, For sale is a copy milling machine from Makre Franz Kuhlmann KG, GM 1/2 series. The machine is fully functional and ready for immediate use. Technical specifications: X-axis (longitudinal travel): 330 mm Y-axis (transverse travel): 200 mm Z-axis (vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet bores up to 8 mm possible Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to help you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? Nodpfx Agswal Dhowjcp For more information or to contact us, visit our website.

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Nodpfx Aoya Hl Esgwocp Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.03 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, Including 7.5 kW extraction system Njdjwf H Avopfx Agwocp Compact, space-saving, and affordable fiber laser Manually extendable work table - electrically assisted Work table safety door opens and closes electrically Sturdy welded construction for high rigidity, precision, and durability Machine bed shielded by manganese steel plates to protect against heat, sparks, and slag Effective cutting fume extraction; controlled flaps focus the extraction power on the current work area Raycus laser source with autofocus laser head from HSG (optional laser source from IPG) Laser head with faster focusing speed than comparable units, resulting in higher penetration speeds with thicker materials Main lens protected by an easily replaceable double protective lens Efficient water cooling of the laser head Power stabilizer to compensate for voltage fluctuations, thus ensuring consistent cutting quality Very easy handling of the machine and the user-friendly software Control software with numerous templates for programming simple components Material storage management User-friendly nesting software with many features Camera-monitored laser work area with transmission to screen

Condition: excellent (used), Year of construction: 2013, 1. Automatic Profiling Planer Weinig Powermat 600 - Net price: €68,800 Technical Data: • Year of manufacture: 2013 • Working width (with cutting circle 93 – 125 mm): 20 – 230 mm • Working height (with cutting circle 93 – 125 mm): 10 – 120 mm • 7 spindles: - First bottom horizontal spindle Motor: 5.5 kW (7.5 HP) - First right vertical spindle Shared motor with first left vertical spindle: 11 kW (15 HP) - First left vertical spindle Shared motor with first right vertical spindle - First top horizontal spindle Motor: 7.5 kW (10 HP) - Second top horizontal spindle Motor: 7.5 kW (10 HP) - Second bottom horizontal spindle Motor: 5.5 kW (7.5 HP) - 7th universal spindle Motor: 5.5 kW (7.5 HP) • Electronic feed drive with brake, stepless adjustment 5 – 30 m/min Motor: 4 kW (5.5 HP) • Operating voltage: 400 V (voltage range 380 – 420 V), 50 Hz • All spindle motors in IE2 design • All spindles with high-precision rotational accuracy • Standard PowerLock fitting • Additional set of spacer rings, installation length 170 mm, diameter 40 mm • Joiner table 2 m long (incl. longitudinal fence) • Marathon Coating for machine table and fences • Special coating for protection of table segments and fences against excessive wear. Recommended for processing abrasive materials (e.g. tropical wood, MDF, chipboard). 2. Weinig Rondamat 960 Powerlock - Automatic Knife Grinder - Net price: €15,300 Weinig Rondamat 960 Powerlock (Automatic Straight Knife and Profile Knife Grinder) Specification: • Weinig Rondamat 960 Powerlock / HSK profile grinder • High-precision knife grinder for sharpening straight knives and profiling using templates • Sharpening of straight knives in cutter block; manual grinding for profile and straight knives • Grinding wheel diameter min./max.: 150 mm / 225 mm • Grinding wheel width: ceramic 5 mm, borazon 10 mm • Grinding wheel bore: 60 mm • Tool diameter min./max.: 100 mm / 300 mm • Max. tool width: 240 mm • Grinding wheel drive: 1.1 kW • Spindle speed: 1700/2000/2400/3000 rpm • Relief angle: Radial (back): 10–30°, Axial: 0–20° • For rotary heads up to 60° • Coolant tank approx. 50 L • Table feed 0–240 mm • Electrical connection approx. 2 kW • Option: PowerLock System – for grinding PowerLock tools • HSK manual quick-release tool holder • Radial table clamping with precision adjustment • Max. tool width: 240 mm 3. WEINIG OptiControl 970095 Tool Measuring Station - Net price: €7,650 Specifications: • Min. tool diameter: 90 mm • Max. tool diameter: 300 mm • Tool length: 0–240 mm • Radial measuring range (radius): 150 mm • Contactless measurement of tool dimensions, radius (R), and height (H) with display on electronic digital readouts • Electronic digital displays show radius and tool height • HSK63 tool holder for PowerLock tools • NEW: PowerLock HSK63 adapter, mandrel D=50 x 260 mm Ncsdjytd S Nspfx Agwep 4. Weinig Template Maker Isel 3020 Copy Router - Net price: €1,700 Applications: • Profile milling • Manufacturing of tool templates for further processing on machines such as Weinig Rondamat 5. POWERLOCK Milling Cutters/Heads - Price: €7,500 Two cabinets filled with various Powerlock milling heads for different applications, approx. 45 pcs.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 500 kg, MAKOR TF/P PLUS Putty Application Machine 19.06.6512 Type: TF/P Plus Maximum working width: 150 mm Maximum height: 120 mm Feed speed adjustable up to 140 m/min Top powered pressure rollers x 6 Pneumatic pressure adjustment Bottom driven rollers x 6 CE mark Year of manufacture: 2013 Product description: - Paint without waste – Verniciatura senza sprechi Ncsdeytc Rkopfx Agwep - Robust and efficient transport system featuring 6 motor-driven pressure units. - Various application heads ensure optimal results even for filling and defect repair materials. Designed for continuous cycle application of putty, gypsum, and paint onto mouldings, picture frames, and extruded profiles using a suitably shaped steel counter-template. The frame is made of steel sheet and tubular steel. Guaranteed forward feed via 6 lower metal rollers and 6 upper pressure wheels made of rubber, with variable speed control by inverter. The upper pressure wheels are mounted on free-running bearings to minimize improper wear. The pneumatic control panel is equipped with a selector for engaging the upper pressure wheels and independent pressure regulators.

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC Nedpfx Ajv Iflpjgwjcp 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Ncedowvgidjpfx Agwop Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Year of construction: 2020, condition: new, machine/vehicle number: SS4X + MTRX, Mobile serialization device (printing: Data Matrix code, GTIN number, batch number, serial number, production date, expiry date) integrated with the superior MTRX serialization system (print template creation, serial number generation) for flat – unfolded cartons, including print verification and reject systems. 100% process verification using an OCR system to validate print accuracy. Implemented production management system (4 access levels, production reports, change reports, breakdown reports, and data backup creation). Operating speed up to 200 cartons per minute. Key features: ✓ Compact dimensions: 2.3m x 1.3m ✓ Broad application range: flat cartons sized 60–180mm x 100–340mm ✓ Random serial number generator ✓ Import of serial numbers from external sources ✓ Serial number uniqueness verification ✓ Creation of batch code content reports ✓ Print template design Njdpfx Agoywk Imjwecp ✓ Audit trail ✓ Device compliant with: o 21 CFR Part 11 o Annex 11 of the EU Directive o Current Regulation of the Minister of Health concerning Good Manufacturing Practice requirements o Directive 2011/62/EU with Regulation (EU) 2016/161

Condition: used, tool width max. ca. 230 mm Nodew Au Rcspfx Agwscp mounting mandrel 30 / 35 /40 /50 /60 mm grinding speed stufenlos einstellbar Weinig Rondamat 931 manual planer blade grinding machine for sharpening and grinding profile blades and straight planer blades in the planer head using templates.

Condition: used, grinding wheel diameter max. 225 mm diameter of tools max. 300 mm tool diameter min. 80 mm Weinig Rondamat 929 knife grinding machine for manufacturing profile knives. Production from a straight blank or regrinding of used knives using a template. Nodpslf H Tgsfx Agwjcp Max. tool width: 230 mm Includes new coolant pump.

Condition: used, Stationary hardness testing machine Hardness tester The hardness tester can be used manually with a template. The device is compatible with software, for data protection reasons the hard disk with software has been removed. Device is sold without software. Retrofit hardness tester Briviskop BL 3: HMEWin-Compact consisting of : 3.900,00 € -Pc with integrated touch screen -HMEWin-Touch Basis software - Hub with 12-pin connection for measuring system -Complete support system for the machine stand. Working time for retrofitting, commissioning, € 1,100.00 Calibration and instruction of employees approx. For more technical data, see type plate. You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Ncjdpjrfwynefx Agwjp Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Njdpfxsxhf Tio Agwjcp Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for a Mast Uri Well. The unit is in full working condition and is ready for immediate release. The Mast Uri Well is a cutting-edge dispensing aid that features a 96 LED template, specifically designed for the streamlined transfer of urine samples in the diagnostic process for urinary tract infections (UTIs). Key Features: 96-Well Template: The innovative design allows for efficient sample transfer across 96 wells simultaneously, facilitating bacterial identification and antibiotic susceptibility testing (AST). Semi-Automated Solution: Integrates seamlessly into the Mast Uri System, combining manual and automated processes for optimal laboratory performance. Benefits: Increased Efficiency: Automating the sample transfer minimizes manual handling, decreasing the time spent on sample preparation and allowing lab technicians to focus on other critical tasks. Njdpfx Agsxxy S Ijwjcp Improved Accuracy: The precise placement provided by the 96-well template minimizes risks of contamination and mis-identification of samples, ensuring reliable results crucial for patient outcomes. Enhanced Throughput: The streamlined workflow enables laboratories to process a higher volume of samples in shorter turnaround times, essential for timely diagnosis and treatment of UTIs. Cost Savings: By reducing the need for manual handling and minimizing waste through efficient sample management, the Mast Uri Well contributes to overall cost reductions in laboratory operations.

Condition: used, This listing is for the KSA SQ1E Steam Quality Test Kit. The system is in excellent working condition and ready for immediate use. ----- System Overview The KSA SQ1E is a portable, air-cooled steam quality testing unit designed for performing Non-Condensable Gas (NCG), Dryness, and Superheat tests in compliance with EN 285 and HTM standards. It provides a complete, self-contained solution for validating clean and pure steam systems used in pharmaceutical, biotechnology, and healthcare facilities. Unlike traditional systems, the SQ1E uses a built-in electric fan condenser, removing the need for cooling water and allowing tests to be carried out anywhere with minimal setup. The compact and durable design makes it ideal for on-site steam testing, validation, and qualification work. ----- Main Components KSA SQ1E Steam Quality Test Unit – fully air-cooled condenser assembly with built-in burette and measuring cylinder for NCG and dryness testing. Dryness and Superheat Test Assembly – includes test expansion tube, pitot tubes, flask, and temperature probe connections. Integrated Burette and Measuring Cylinder – illuminated and fitted with push-button zeroing and pause functions for precise readings. Power Supply – 12 V DC operation for the condenser fan and internal electronics. Steam Connection Set – includes tri-clamp and hose fittings for connection to clean steam systems. Portable Case – compact and rugged housing with handle and workspace shelf for field testing. Operating Manual and Documentation – includes standard test procedures, setup guidance, and result templates. ----- Nedpfxoxqqyyo Agwscp Key Features Air-cooled condenser design eliminates the need for external cooling water. Performs all required steam quality tests: Non-Condensable Gases, Dryness, and Superheat. Built-in burette and measuring cylinder for accurate, repeatable measurement. Push-button zeroing, pause function, and backlit illumination for ease of use. Portable, plug-and-play design ideal for site validation and testing. Complies fully with EN 285, HTM, and pharmaceutical clean steam standards. ----- Specifications Manufacturer: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Type: Steam Quality Test Kit Power Supply: 12 V DC Cooling Method: Air-cooled, fan-assisted condenser Functions: NCG, Dryness, Superheat testing Operation: Manual/portable Compliance: EN 285, HTM, AAMI, PDA guidelines Construction: Stainless steel and aluminium components in rugged portable case

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm Ncsdpfx Ash Axk Ijgwop 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2026, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Marking template FREE :) Price: EUR 6,600.00 Ncodpfx Aecrcgqegwjp Delivery costs: PLEASE ASK Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Ncsdpfx Aexz Sknogwjp Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand

Condition: used, color: other, first registration: 01/2008, Year of construction: 2008, Serial number: UNKNOWN NO TEMPLATE We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Ncodpfx Ageybaafowop

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist Ncsdpfsxak H Esx Agwop - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm Ncedexak D Rspfx Agwsp - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 Nodpfxexak Hxo Agwjcp - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model Nsdpfjyrphmsx Agwocp - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). Nedpfsyrn Rasx Agwjcp - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries Ncsdoxzg Ubjpfx Agwop High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max