Used Feutron Climate Chamber for sale (5,831)

Condition: excellent (used), Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door removed: Width 1540 mm x height 1940 mm x depth 925 mm Test chamber: Width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with open doors Width 2340 mm x height 2090 mm x depth 2165 mm Feed-through opening 2 side panels, left ∅ 100 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! Fpjdoqxavaspfx Afnsc The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Fjdpfx Afoklv H Ijnspc Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Fjdpfsvlpctjx Afnjpc Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Year of construction: 2001, operating hours: 100,290 h, condition: ready for operation (used), functionality: fully functional, controller model: Simcon/32-NET Version 00.1902, inner dimension height: 750 mm, inner dimension length: 615 mm, inner dimension width: 580 mm, usable tank capacity: 270 l, machine/vehicle number: 58226018400020, TECHNICAL DETAILS Temperature range: -70 °C to 180 °C Fedpfoyfud Tox Afnopc Test chamber volume: 270 L Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time: 0.1 to 0.5 K Temperature spatial uniformity: 0.5 to 2.0 K Test chamber dimensions (W x D x H): 580 x 615 x 750 mm MACHINE DETAILS Overall dimensions (D x W x H): 2,080 x 895 x 1,950 mm Voltage: 3/N/PE AC 400 V ±10% 50 Hz Nominal power: 14 kW Nominal current: 26 A Refrigerant: R-404A / R-23 Control system: Simcon/32-NET Version 00.1902 EQUIPMENT Door with window Interior lighting Water cooling Feedthroughs left: 2x NW 50 mm Feedthroughs right: 3x NW 125 mm Compressed air dryer type: ZANDER

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm Fjdpfsygvm Eex Afnopc - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Model: VT³ 4150 Vötsch Temperature Test Chamber, Air-Cooled Temperature Testing Temperature Range: -40°C to +180°C Rate of Change: Cooling approx. 2.5 K/min Rate of Change: Heating approx. 3.5 K/min External Dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Fsdpfxjygux Ts Afnjpc Test Chamber Dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 11.5 kW Rated Current: 22.0 A Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information: We perform the following steps on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Model: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 11.5 kW; Rated current: 22.0 A Change rate (cooling): approx. 3.5 K/min Change rate (heating): approx. 4 K/min Temperature testing Temperature range: -40°C to +180°C Layout drawing External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A Fpedsyguuzjpfx Afnsc For your safety as the buyer, please note the following information! The following items are carried out on all chambers offered by us: 1. Functional inspection and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Technical data and information subject to change and errors excepted!) We are happy to answer further questions by telephone.

Condition: excellent (used), CTS Type: C-40/350 CTS Temperature Test Chamber, Air-cooled Test chamber volume: 350 liters Internal dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1,800 mm, Width 850 mm, Depth 1,640 mm Fpedpfjyguqpox Afnoc Design: Floor-standing unit Temperature operating range: Temperature range: -40°C to +180°C Cooling rate: 4.0 K/min Heating rate: 3.0 K/min Electrical connection: 400V +6/-10 %, 3/N, 50Hz Connected load: 5.5 kW Rated current: 8.3 A Condenser for refrigeration unit: Air-cooled Refrigerant: R-404A Weight: 550 kg For your security as a buyer, the following measures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful completion, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions for you by phone.

Condition: excellent (used), CTS Temperature Test Chamber We offer you here a CTS temperature test chamber. Water-cooled Model series: T-40/600 Fedpeygup Sefx Afnopc Including metal support bars to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for you as a buyer! The following steps are carried out on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Here we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Temperature change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (approx.): Height 750 mm, Width 650 mm, Depth 720 mm External dimensions (approx.): Height 1800 mm, Width 850 mm, Depth 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Nominal power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Type: TS-70/350 Important safety information for buyers: The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Fodpfx Afsyguprjnspc Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) Further questions can be answered by phone.

Condition: used, - Type: Professional deck oven with open front - Configuration: 5 levels × 3 decks = 15 doors - Energy supply: Triple energy (gas / wood / diesel) - Heating system: Annular tubes for uniform heat distribution - Useful depth: 2,200 mm Fedpfxoyg H A Rs Afnepc - Condition: Near new, only used for commissioning and ignition tests - Previous usage: No commercial production, exclusively technical trials - Structure: Fully stainless steel, durable and easy to maintain - Baking surface: Refractory stone deck - Controls: Manual adjustment - Working temperature: Up to 300°C - Insulation: High-density, minimizing heat loss and energy consumption - Overall dimensions: Large build suitable for production facilities - Production capacity: Ideal for high-throughput baking (bread, pizza, viennoiseries, etc.) - General condition: Excellent - New value approx. €120,000 The Continental Forni 5 x 3 deck professional deck oven is a benchmark for artisan bakeries and high-volume production units. Made in Italy, it combines robustness, performance, and versatile energy options. With its 5 levels and 15 independent chambers, it ensures even and continuous baking of bread, pizza, or viennoiseries. A powerful, versatile deck oven This open-front deck oven operates with three energy sources: gas, wood, or diesel. Its annular tube heating system ensures uniform heat distribution across the refractory stone surfaces, guaranteeing traditional, golden, and crisp baking while optimizing energy consumption. Main features • Brand: Continental Forni • Type: Professional deck oven with open front • Configuration: 5 levels × 3 decks = 15 doors • Useful depth: 2,200 mm • Heating system: Annular tube • Energy: Gas, wood, or diesel • Refractory stone baking surface for traditional results • Construction: Full stainless steel • Maximum temperature: 300°C • High-density insulation for energy savings • Manual controls • Condition: Near new, only used for ignition tests Production advantages • Even and consistent baking in every chamber • Flexible operation depending on available energy (gas, wood, or diesel) • Ideal for large-scale baking of bread, pizza, and viennoiseries • Durable, low-maintenance stainless steel structure • Italian quality oven, renowned for its reliability and longevity Recommended applications • Artisan and industrial bakeries • High-output bread production lines • Cooperatives and central baking kitchens Why choose the Continental Forni deck oven This 5 x 3 deck oven is designed to deliver power, precision, and efficiency. Its 2.2-meter depth allows baking large quantities in a single batch. It is the perfect choice for bakers seeking traditional baking with an almost new oven at a reduced price. FAQ – Frequently Asked Questions Does the oven only run on gas? The listing was translated automatically. Translation errors are possible.

Condition: excellent (used), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled CTS Temperature Test Chamber Technical specifications: Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability, temporal: ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Model: T-70/600 Important Information for Buyers! Fpodpfx Aeygupfjfnjc The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), We are offering a temperature test chamber here. Water-cooled Temperature range: -45°C to +180°C Fpsdjygunhjpfx Afnoc External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Fpjdpeygultefx Afnsc Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: Fodpsyguh Isfx Afnepc - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, LC-tray degassing chamber 2. Degassing Chamber: 1. Vacuum profile; 1.1. Pressure set points freely adjustable between 1.103 and 1.10-3 mBar 1.1.1. Measurement range: 1.103 – 5.10-4 1.2. Time set points freely adjustable between 1 and 600 min per step 1.2.1. Degassing step (D) can range from minutes to days 1.3. Evacuation and ventilation rates must be controllable 1.4. The evacuation cycle (A – D) is executed automatically 1.4.1. The venting step (E) must be manually activated (operator) 1.5. Typical degassing profile An LC-tray degassing chamber is a specialized vacuum chamber designed to remove trapped air and dissolved gases from liquid materials (such as Liquid Crystals or "LC liquid") contained in a tray. This process ensures that the material is free from bubbles prior to further processing, which is critical for the quality and reliability of electronic components and displays. Core Functionality - Controlled Vacuum Environment: The system generates a vacuum, reducing the pressure above the liquid, which forces trapped gas bubbles to rise and escape. - Precision Profiles: High-end units provide freely adjustable pressure set points (e.g., between 1×10³ and 1×10⁻³ mBar) and time cycles (from minutes up to several days) to suit different material viscosities and process requirements. Fpsdpfx Afowlirysnoc - Automated Cycles: Evacuation cycles are performed automatically, while venting is manually controlled to prevent liquid agitation or sudden movement. Key Components & Features - Chamber Construction: Usually constructed from 304 stainless steel or polished aluminum to ensure high vacuum resistance, durability, and easy cleaning, thereby reducing the risk of contamination. - LC-Tray Drawer: Special drawer or adaptation system ensures easy loading and unloading. It is vital that the tray stays perfectly level (waterpas) to avoid liquid spillage. - Monitoring Window: A thick, transparent lid (often made from acrylic) or viewing panel enables operators to monitor the liquid surface and bubble behavior during the process. - Cleanliness Standards: Interior surfaces are highly polished to prevent moisture retention and ensure no contamination by chamber materials. Typical Specifications (Based on industrial models such as GMC/Masevon):

Condition: used, mileage: 173,326 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 05/2019, fuel tank capacity: 72 l, CO₂ emissions: 164 g/km, emission class: euro6, color: red, number of seats: 3, number of previous owners: 2, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jun 2016 - Aug 2019 Cab: single Technical information Torque: 330 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Transmission: 6 gears, Manual gearbox Acceleration (0-100 kph): 12,8 s Top speed: 184 km/h Measures length/height: L3H1 Dimensions (LxBxH): 537 x 193 x 199 cm Weights Empty weight: 1.974 kg Carrying capacity: 826 kg GVW: 2.800 kg Fpedjyh Nfnepfx Afnoc Interior Interior: black Consumption Average fuel consumption: 6,4 l/100km (44 MPG) Urban fuel consumption: 8,2 l/100km (34 MPG) Extra urban fuel consumption: 5,3 l/100km (53 MPG) Maintenance, history and condition APK (MOT): tested until 10/2026 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Year of construction: 2026, condition: new, functionality: fully functional, total length: 205 mm, total width: 425 mm, total height: 1,650 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, machine/vehicle number: 2026, NEW +++ NEW Climate Control Unit for Proofing Chambers NEW +++ NEW For optimal heat and humidity "The ideal solution for climate control in proofing cabinets and prepared rooms." Main features: - Energy efficient - Easy installation and operation - Unit dimensions (W x D x H): 425 mm x 205 mm x 1650 mm (without hygrostat) - Maximum operating temperature: 60 °C - Recommended operating temperature: ~ 37 °C - Humidity up to 95% - Adjustable temperature and humidity - Suitable for proofing chambers up to 12 m³ - Plug-and-play floor-standing unit Connection: 400V, 16A CEE plug New equipment with warranty and spare parts service Fpodpfx Afsxbm Tqsnsc We have more bakery machines in stock!

Condition: used, mileage: 101,564 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,660 mm, first registration: 08/2019, fuel tank capacity: 71 l, CO₂ emissions: 215 g/km, emission class: euro6, color: red, number of seats: 2, number of previous owners: 1, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jun 2018 - Dec 2021 Cab: single Technical information Torque: 330 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Transmission: 7 gears, Manual gearbox Measures length/height: L2H1 Weights Empty weight: 2.170 kg Carrying capacity: 1.030 kg GVW: 3.200 kg Interior Interior: black Consumption Fsdpfx Asyh Ey Usfnepc Average fuel consumption: 8,2 l/100km (34 MPG) Urban fuel consumption: 9,4 l/100km (30 MPG) Extra urban fuel consumption: 7,5 l/100km (38 MPG) Maintenance, history and condition Service history: Present APK (MOT): tested until 10/2026 Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Condition: excellent (used), CTS Type: T-40/600 Water-cooled temperature test chamber Control system: - 32-bit controller - LCD operator panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text Fpsdpfsx E Tq Tex Afnoc - RS 232 interface - Free relay channels for user-side test item control Technical specifications Temperature tests: Temperature range: -40 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K (over time) Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal radiation: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without test specimen, no heat input, and without additional equipment. Dimensions: Test chamber volume: 600 liters Test chamber interior dimensions (HxWxD): approx. 850 mm x 850 mm x 830 mm External dimensions (HxWxD): approx. 1900 mm x 1120 mm x 1875 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 7.1 kW Rated current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A Weight: 700 kg Important safety information for buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and errors reserved!) We are happy to answer further questions by phone.

Condition: used, mileage: 130,846 km, power: 121 kW (164.51 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,320 mm, first registration: 05/2020, fuel tank capacity: 71 l, CO₂ emissions: 218 g/km, emission class: euro6, color: white, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jun 2018 - Dec 2021 Cab: single Technical information Torque: 380 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Transmission: 6 gears, Manual gearbox Measures length/height: L3H2 Dimensions (LxBxH): 697 x 202 x 283 cm Fpsdpfx Aexl E A Sjfnsc Weights Empty weight: 2.497 kg Carrying capacity: 1.003 kg GVW: 3.500 kg Interior Interior: black Consumption Average fuel consumption: 8,3 l/100km (34 MPG) Urban fuel consumption: 7,7 l/100km (37 MPG) Extra urban fuel consumption: 7,5 l/100km (38 MPG) Maintenance, history and condition APK (MOT): tested until 10/2026 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: AYA320NY3006, overall weight: 950 kg, total length: 1,700 mm, total width: 1,650 mm, total height: 2,120 mm, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Fpodswm Htqspfx Afnjc Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of construction: 2007 Mains connection: 400V Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 plates Oven Dimensions: 72 x 50 x 72cm Dimensions: 170 x 165 x 212 cm Weight: ~950 kg

Condition: used, mileage: 124,852 km, power: 121 kW (164.51 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,200 mm, first registration: 01/2020, fuel tank capacity: 70 l, CO₂ emissions: 198 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 4 Model range: Aug 2019 - Jun 2020 Cab: single Technical information Torque: 380 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Transmission: 7 gears, Automatic Measures length/height: L2H1 Dimensions (LxBxH): 514 x 193 x 198 cm Weights Empty weight: 1.965 kg Carrying capacity: 1.235 kg GVW: 3.200 kg Interior Interior: black Consumption Average fuel consumption: 6,8 l/100km (42 MPG) Urban fuel consumption: 8 l/100km (35 MPG) Extra urban fuel consumption: 6 l/100km (47 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): New APK (MOT) upon delivery Number of keys: 3 (3 hand transmitters) Financial information Ask for the financial lease options Fpsdpfx Aeygmx Sofnsc Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Condition: used, Year of construction: 1996, Overview  This chamber pasteurizer was manufactured in 1996 by German company JOHA (Johannes Arno Hartenstein). According to available documentation, the machine was acquired in 2021 as a unit described as overhauled and partially renewed, and the control system was renewed in 2020. The machine is immediately available and can be viewed in person. Technical data  Type: Chamber pasteurizer Heating: Steam Capacity / Content: Total chamber volume: approx. 10.3 m³ Net usable volume: approx. 5,850 L Electrical connection: 230 / 400 V, 50 Hz Installed power: approx. 5.2 kW Current: approx. 10.5 A Fuse: 3 × 35 A (slow-blow) Protection class: IP54 Steam connection: DN 80 Condensate connection: DN 50 Max. steam pressure: approx. 0.2 bar Steam consumption: approx. 300 kg/h Noise level: < 70 dB(A)   Fpedpfxoyb Sube Afnsc

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Fedsycvd Nspfx Afnopc Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.