Used Feraboli Ff 50 for sale (100,117)

Year of construction: 2003, condition: ready for operation (used), Max. operating pressure: 70bar, hydraulic fluid filling quantity: 630l, with loading portal and sliding guide with carriage. Gkedpslbmtcjfx Aacjc

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2,300 kg, total height: 600 mm, total length: 1,500 mm, total width: 1,500 mm, Clamping cube - T-slot plates 1500 x 1500 x 600 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Parameters can be combined as desired. Clamping plate : 1500 x 1500 x 600 mm T-slots - width: 38mm x 22mm Godpfx Aotrk Tfeacekc T-slot spacing: 140mm Edge distance: 40mm Number of grooves: 10 Casting quality: HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Gkodpfoxak Ucjx Aacec Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: new, Balluff BIS00T3 evaluation unit BIS V-6102-019-C001 SN:1650HU, unused, 100% functional, scope of delivery as per photos Gkodpfx Aael Ech Eecec

Condition: good (used), Year of construction: 2011, Injection Moulding Machine Krauss Maffei KM 850-12000 MX Krauss Maffei LRX 500 Robot Year of Manufacture: 2011 Machine Description: Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV-controlled injection unit. MC 5 control system with color monitor, integrated control panel, and USB data storage. Plasticizing Unit: Complete plasticizing system for thermoplastics with a 135 mm diameter screw, shut-off nozzle, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm Technical Specifications: Clamping Unit: Clamping force: 8,500 kN Mold opening force: 560 kN Platen size (H x V): 1600 x 1600 mm Tie bar spacing (H x V): 1140 x 1140 mm Mold opening stroke: 1600 mm Mold height (min–max): 500 – 1100 mm Daylight opening: 2100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection Unit: Screw diameter: 135 mm Injection pressure: 1389 bar Injection volume: 8588 cm³ Gkedpfx Ajw Rdlqjacec Shot weight (PS): 6098 g Injection rate: 1414 cm³/s Electro-Hydraulic Equipment: Pump motor power: 132 kW Dry cycle time (Euromap 6): 965 cycles/h Oil tank capacity: 2440 l Dimensions and Weight: Net weight with control cabinet: 49 t Footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Condition: excellent (used), Year of construction: 2011, operating hours: 38,000 h, clamping force: 850 kN, screw diameter: 80 mm, clearance between the columns: 1,140 mm, mold height (min.): 500 mm, pressure: 2,400 bar, power: 6.6 kW (8.97 HP), Year: 2011 Control type: MC5 Operating hours: 38,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Clamping force: 850 T Opening stroke: 1600 mm Distance between tie bars: 1140 mm x 1140 mm Platen dimensions: 1600 mm x 1600 mm Min./max. mould height: 500/1100 mm Max. distance between platens: 2700 mm Screw diameter: 80 mm Screw length: 20D Capacity (cm³): 1810 Pressure (bars): 2328 Motor power: 90 kW Heating power: 36 kW Closing unit weight: 32 t Gkjdpfx Aajwvp E Iecsc Injection weight: 10 t Machine length: 2.30 m Machine width: 2.92 m Machine height: 2.51 m Cores: 6 HYDRAULIC CORES Robot interface: YES Bimetallic: YES Others: 12 sequential controls 1 robot KM LRX350

Year of construction: 1999, condition: excellent (used), injection molding machine krauss-maffai 150-700 c1 year 1999 Screw diameter 55 mm In top condition, still in operation Gjdpfx Aeh S Dnceacjkc

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve Gjden Smcljpfx Aacekc - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: excellent (used), Year of construction: 2001, Injection Moulding Machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Software language: German Operating hours: 70,000 Clamping Unit Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen size (H x W): 1,610 mm x 1,530 mm Tie bar spacing (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector – stroke: 250 mm Injection Unit Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and Weight Gkjdpfx Aajw U D I Tocec Dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tons

Condition: ready for operation (used), Beckhoff Model: AM3042-0G41-0000 Servo motor Serial number: 154767650, used, good condition, 100% functional, scope of delivery as per photos Gedpfotqqwgsx Aacekc

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Gkjdpow Hthzjfx Aacjc

Condition: good (used), Automatic pendulum saw from Pfeiffer and APK. Cutting height 150 mm. Cutting width approx. 500 mm. Saw motor 5.5 kW. Electric adjustment. Pneumatic saw ejection. Travel distance approx. 2000 mm. Gksdpfow Icxwjx Aacjc

Condition: used, Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder -Type: BDG 6360-2-10-30-W126-2500-65 Gksdsun Dwyopfx Aacsc -Quantity: 2 encoders available -Price: per piece -Dimensions: 58/86/H70 mm -Weight: 0.3kg

Condition: new, overall weight: 4,400 kg, total height: 310 mm, total length: 4,000 mm, total width: 1,500 mm, Clamping plates - T-slot plates 4000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an Gksdpfx Aastrli Rscec individual plate for you. Number of hookers: 5 Edge distance: 14mm Hook spacing: 270mm Hook width: 28mm Material: cast iron HT250. Flatness less than 0.12 mm. Surface processed according to DIN 876 / III

Condition: new, Effgen 4BT9-250-3-12-W5/W10-K505NE-B126-C100 CBN disc 503122.01, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Gsdpfx Asi D Uq Nsacskc

Condition: used, Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Gkjdpfxolvykxo Aacjc -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 2x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: new, Balluff BTLONLH BTL7-G110-M0200-B-S32 Micopulse displacement transducer, serial no. according to photo, unused in original packaging, 100% functional, scope of delivery according to photos Godoi D T Elopfx Aacjkc

Year of construction: 2002, condition: good (used), Electric cable winch, cable winch, hoist winch, construction winch, cable pull, console winch -Manufacturer: Pfaff silver blue, console winch -Type: Tensile load: 0.16 to 0.35 t -Wire rope: Ø 4 mm / length 24 m Gedpfx Aaev Sqg Tocokc -Dimensions: see photos -Dimensions: 1090/410/H320 mm -Own weight: 14.4 kg

Condition: new, Balluff BTL0NLH BTL7-G110-M0200-B-S32 Micropulse displacement transducer, serial no. according to photo, unused in opened original packaging, 100% functional, scope of delivery according to photos Gedpfei D T Ehex Aacekc

Condition: used, CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm Gkjdpfx Aajnch Iijcsc -Weight: 0.1 kg/pc.

Condition: ready for operation (used), Schaffner FN3100-150-40 mains filter, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Gsdpfei Ec Hwsx Aacokc

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Gedpfxsmkm I Uo Aacjkc -Manufacturer: ROM-Boffalora, double-acting hydraulic cylinder stroke 150 mm -Type: 65 45M 150 FRA S -Piston rod: Ø 45 mm -Number: 2x cylinder available -Price per piece -Dimensions: 375/100/H160 mm -Weight: 14.8 kg/pc.

Condition: used, Fan filter, fan row, air cooler, control cabinet fan, filter fan Godpjuqf Hbsfx Aacekc -Manufacturer: Schroff / Papst, fan assembly type 60700-018 with 3 axial fans -Axial fan: Papst Type 4850 N -Voltage: 220 V / 9 W -Dimensions: 480/180/H40 mm -Weight: 2.7 kg

Condition: used, Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements Gsdpfxodl Smde Aacokc -Clamping angle for: workpiece clamping -Dimensions: 500/605/H815 mm -Wall thickness: 37 mm -Surface: milled -Long holes for workpiece clamping: mm -Number: 1x angle available -Price: per piece -Weight: 225 kg/piece

Condition: used, pneumatic piston pumps, airless high pressure pump, air motor, AIR MOTOR -pneumatic piston pump manufacturer Bollhoff -Type: DB-55.150 Gjdpsc R Ix Sofx Aacjkc -Material volume: max. 7.5 l/min -Max. Pressure: 330 bar -Material temperature: max. 90 °C -Dimensions pump: 1100/900/H1250 mm -Weight: 132 kg -with: drip tray and membrane pump -Manufacturer Graco Type: Husky 307 -Dimensions: 1140/1300/H1500 mm -Weight: 146 kg