Used Facing Slide for sale (8,477)

Condition: refurbished (used), Year of construction: 2009, TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN Rawable length mm: 600 Rawable width with grinding wheel width mm: 390 Rawable height with new grinding wheel (on magnetic chuck) mm: 400 Magnetic chuck surface mm: 600x300 Longitudinal travel mm: 750 Transverse travel of the carriage under the table mm: 350 Adjustable table speed m/min: 1-30 Gripping wheel dimensions mm: 400x40x127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power: 7.5 kW Pedjx N I Arjpfx Aa Eoha Hydraulic pump motor power: 2.2 kW Net machine weight: 3,000 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on linear needle slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Vertical axis resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Dimension readout on the display. Display resolution: 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The transverse movement is performed on hydrostatic slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Dimension readout on the display. Display resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Electronic handwheel for manual movement. - Longitudinal table movement Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement. Rotation speed is continuously adjustable from 1 to 30 m/min. - Lubrication Located outside the machine, this system controls the table movement and the lubrication of all moving parts. ACCESSORIES - LODI CNC type T 2020W with 12.1" graphic display (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with paper filter and high-pressure pump - Mist extractor (capacity 2,400 m³/h) - Electro-permanent magnetic plate, dimensions 600 x 300 mm - Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation. - YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest. - Grinding wheel flange with balancing shaft - Complete work area enclosure - Work light

Condition: used, mileage: 536,512 km, power: 243 kW (330.39 HP), first registration: 06/2019, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,340 mm, loading space width: 2,520 mm, loading space height: 2,490 mm, Year of construction: 2019, Equipment: air conditioning, electric window regulation, tail-lift, Tyre size: 315/70R22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 12.570 kg Pedpfx Aaewzltfs Eeha Carrying capacity: 6.430 kg GVW: 19.000 kg Tail lift: D HOLLANDIA, slider lift

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning height: 1,200 mm, workpiece weight (max.): 8 kg, turning diameter: 1,650 mm, faceplate diameter: 1,450 mm, rotational speed (min.): 2 rpm, spindle speed (max.): 200 rpm, power: 60 kW (81.58 HP), VERTICAL BORING MILL Inv. No. 12.958DM Make TITAN Model SC17 Year 2010 Face plate diameter Ø 1450 mm Max. swing Ø 1650 mm Max. height 1200 mm Max. load 8 Tons Rail vertical travel 1000 mm RPM 2,2 – 200 kW 60 Volts 400 Cycles 50 Hz Including: Pjdpfxeq Drldj Aa Eoha 1 x Turret head, vertical travel 700 mm 1 x Ram head, vertical travel 1000 mm 1x Side Head, horizontal travel 1000 mm Chip conveyor Arboga/Darenth Heidenhain DRO

Condition: good (used), mileage: 849,250 km, power: 360 kW (489.46 HP), first registration: 02/2015, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 8x2, wheelbase: 5,300 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,150 mm, total width: 2,550 mm, total height: 3,730 mm, loading space length: 6,190 mm, loading space width: 2,540 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, traction control, trailer coupling, - Digital tachograph - Tachograph (control device) - Fixed - PTO (power take-off) - Pump - Sleeper cab - Central lubrication - Additional brake system Number of axles: 4, Configuration: 8x2, Unladen weight: 18,740 kg, Gross weight: 35,000 kg, Total tank capacity: 400 liters, Trailer coupling, King pin diameter: 40 DIN, Fifth wheel: Fixed, Number of differentials locks: 1, Central lubrication, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stand heating, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Color: white, Heated mirrors, Lighting type: Halogen, Seat heating, Bluetooth, Flashing lights, Engine power: 360 kW (483 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox brand: Scania, Gears: 12, Additional brake system, Retarder brand: Scania, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, Direction of rotation: 1x20, Pump, Central locking, Seating arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: HMF 6020, Year of crane: 2015, Crane lifting capacity: 60,000, Maximum load: ?, Number of support legs: 4, Crane position: behind the driver cabin, Sliding: 6, Lifting hook Transmission Transmission: SCA, 12 gears, automatic Axle configuration Tire size: 315/60R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steering; Tyre profile left: 10 mm; Tyre profile right: 8 mm Axle 2: Steering; Tyre profile left: 5 mm; Tyre profile right: 11 mm Axle 3: Twin tires; Tyre profile left inner: 2 mm; Tyre profile left outer: 1 mm; Tyre profile right inner: 6 mm; Tyre profile right outer: 5 mm Axle 4: Lift axle; Steering; Tyre profile left: 7 mm; Tyre profile right: 11 mm Weights Unladen weight: 18,740 kg Payload: 16,260 kg Gross vehicle weight: 35,000 kg Functional Crane: HMF 6020, year of manufacture 2015, behind the cab Loading bed height: 103 cm Pump: Yes Maintenance APK (Technical inspection): valid until 02.2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, trailers. Our offer includes all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Easy! • Large, fast-changing stock • Recognizable quality • Competitive prices • Reliable commercial conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly Phsdpfx Asx Icqnsa Esa • Expert technical service • The safety of 'recognizable quality' • And more.... Please visit our website for special offers and complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send your request via our website. Contact us directly...

Condition: good (used), Star SR-20 Type 530G CNC Sliding Head Lathe with Fanuc Series 16-T Control & FMB 'Turbo 3-26/4200' Automatic Bar Feeder 7-Axis. Ø20mm Lathe Spindle Turning Capacity. Spindle Speeds Up To 8,000rpm. (3) Driven Heads. S/No. 010944. FMB 'Turbo 3-26/4200' Automatic Bar Feeder. Bar Capacity Ø3mm-26mm x 4,200mm Long. With: Coolant Tank. Parts Catcher. Cromar Chip & Swarf Conveyor. Mobile Tipping Swarf Bin. Assorted Collets. Power Supply 415 Volt 3-Phase. Weight of Lathe Approx 1,800kg. Pedex Ah R Hspfx Aa Ejha

Condition: good (used), Year of construction: 2007, turning diameter over cross slide: 370 mm, spindle bore: 104 mm, turning length: 2,000 mm, turning diameter: 554 mm, center width: 2,000 mm, turning diameter over bed slide: 554 mm, swing diameter over cross slide: 370 mm, turning diameter over top slide: 554 mm, spindle speed (max.): 2,000 rpm, total length: 4,100 mm, total width: 2,000 mm, total height: 1,750 mm, overall weight: 3,600 kg, rotational speed (max.): 2,000 rpm, Equipment: rotational speed infinitely variable, Centre distance: 2.000 mm Swing: 554 mm over bed / 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2.000 rpm 3-jaw Chuck: Schunk Ø 350 mm Camlock Controller: GE Fanuc Featured with: - 1x Fixed steady Ø 245 mm (without base plate) - 1x Fixed steady Ø 390 mm (without base plate) - 18 Parat toolpost holders - Various jaws for chuck - Centre points - Cooling unit - Machine Manuals Country of origin: UK Phodpfx Aex Id Dcoa Eea Motor power: 7,5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Psdpsx N I Alsfx Aa Eoha Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: used, mileage: 821,361 km, power: 250 kW (339.91 HP), first registration: 02/2011, tire size: 315/70r22.5, axle configuration: 4x2, wheelbase: 5,500 mm, color: white, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: air, Year of construction: 2010, Equipment: electric window regulation, spoiler, tail-lift, Tyre size: 315/70r22.5 Suspension: air suspension Rear axle: Double wheels Drive: Wheel GVW: 19.000 kg Make of engine: Renault Tail lift: D HOLLANDIA, slider lift Podpfsuczcnsx Aa Ejha

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing ) Phjdpfx Aoiyyc Eja Eea

Condition: good (used), mileage: 744,806 km, power: 331 kW (450.03 HP), first registration: 10/2017, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 2,950 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,640 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, parking heater, retarder, traction control, = Additional Options and Accessories = - Digital tachograph - Tachograph (control device) - Sliding fifth wheel - Sleeper cab - Additional braking system = Notes = Number of axles: 3, Configuration: 6x2, Unladen weight: 9,540 kg, Gross weight: 27,000 kg, Total fuel tank capacity: 610 liters, Fifth wheel height: 118 cm, Fifth wheel: sliding, Number of differentials: 1, Suspension type: full air suspension, Cabin type: sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Color: white, Rear view camera, Engine power: 331 kW (444 hp), Euro standard: 6, Transmission type: Opti-cruise, Gears: 12, Additional braking system, Retarder brand: Scania, Power steering, ABS, ASR, G 450 A 6X2 NB / DC 13 148 = Further Information = Podpfx Aajwck I Rs Esha Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tire size: 385/55R22.5; Steerable; Left tire tread: 7 mm; Right tire tread: 7 mm Axle 2: Tire size: 315/70R22.5; Twin tires; Left inner tread: 6 mm; Left outer tread: 7 mm; Right inner tread: 8 mm; Right outer tread: 7 mm Axle 3: Tire size: 315/60R22.5; Twin tires; Lift axle; Left inner tread: 13 mm; Left outer tread: 14 mm; Right inner tread: 7 mm; Right outer tread: 6 mm Weights Unladen weight: 9,540 kg Gross weight: 27,000 kg Condition Technical condition: good Optical condition: good Damages: none Number of keys: 3 Financial Information Lease price: €622 per month (default, 60 months); Please ask for further information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-rotating stock • Recognizable quality • Great prices • Reliable business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The safety of 'recognizable quality' • And more... Please visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2022, operating hours: 604 h, General information Number of doors: 2 Year of manufacture: Sep 2022 Model year: 2022 Mileage: 110.820 km Colour: White Cab: single, day Registration number: 717052 Technical information Power: 100 kW (136 HP) Number of cylinders: 4 Engine capacity: 2.287 cc Type of fuel: Diesel AdBlue system: Yes Transmission: 6 gears, Manual gearbox Measures Dimensions (LxBxH): 598 x 203 x 307 cm Weights Empty weight: 3.369 kg Carrying capacity: 131 kg Phedpex N Ey Iofx Aa Eja GVW: 3.500 kg Functional Mast: sliding Mast length: 26 m Lifting capacity: 400 kg Lift height: 2.600 cm CE mark: yes Environment Emission class: Euro 6 Maintenance APK (MOT): tested until 03/2026 Condition General condition: very good Technical condition: very good Visual appearance: very good Additional information Please contact Moussa or Youssef for more information Video of the vehicle in operation: Neat Iveco Daily 2.3D 35S14 moving van/ladder lift/moving lift/furniture lift, 26 meters GVW 3500 kg Tow bar 3500 kg, braked towing Year of manufacture: 09-2022 400 kg with XL loading platform With radio/cable remote control Automatically rotates on its axis 4 outriggers, dual tires, very stable even at great heights Works perfectly All documents included, COC (European Certificate of Conformity) phase 1 and phase 2 (bodywork). CE certification also included; with these documents, it can easily be registered in any other country. PTO 604 hours The vehicle has 110,000 km on the clock, verifiable with a mileage certificate. The vehicle is truly in mint condition. Watch the video:

Condition: good (used), mileage: 153,442 km, power: 120 kW (163.15 HP), first registration: 02/2016, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 3, total length: 6,150 mm, total width: 2,050 mm, total height: 2,650 mm, loading space length: 3,300 mm, loading space width: 1,760 mm, loading space height: 1,910 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional options and accessories = - Tinted windows - None - Partition wall = Remarks = Configuration: 4x2, Payload: 1,242 kg, Curb weight: 2,258 kg, Gross vehicle weight: 3,500 kg, Trailer load, unbraked: 750 kg, Center axle trailer load, braked: 2,000 kg, Tow bar, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Tinted windows, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Color: Blue, Light type: Halogen lamp, Speed limiter, Bluetooth, Engine power: 120 kW (161 hp), Fuel: Diesel, Emission standard: Euro 5, Drive type: Timing chain, Transmission: Automatic, Speed limiter, Power steering, ABS, ASR, Starter battery, Side paneling, Roof rack: None, Side doors: 2, Side windows: 1, Rear closure: Double doors, Central locking, Seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, AC automatic, cruise control, twin sliding door, Spare wheel, Tire type: All-season tires = Further information = General Information Number of doors: 2 Registration number: VS-872-X Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring Axle 1: Tire tread left: 8 mm; Tire tread right: 8 mm Axle 2: Tire tread left: 7 mm; Tire tread right: 9 mm Weights Empty weight: 2,258 kg Payload: 1,242 kg Gross vehicle weight: 3,500 kg Functional Pedpfow Dyw Dox Aa Ejha Loading height: 68 cm Maintenance APK (technical inspection): valid until 02.2026 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Phodpfex Nn Stox Aa Eoa Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, axle configuration: 3 axles, first registration: 11/2013, loading space length: 13,300 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, suspension: air, tire size: 385/65/r22,5, wheelbase: 1,300 mm, Year of construction: 2013, Equipment: tail-lift, Tyre size: 385/65/r22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Empty weight: 12.230 kg Carrying capacity: 25.770 kg GVW: 38.000 kg Tail lift: D HOLLANDIA, slider lift Make of bodywork: CHEREAU CARRIER VECTOR 1950 MULTI Pjdpfx Aaox Nv U As Eeha

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Phodpfx Asiyyndsa Eoa Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: good (used), mileage: 959,661 km, power: 340 kW (462.27 HP), first registration: 02/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,200 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, traction control, = Additional Options and Equipment = - Digital tachograph - Tachograph (monitoring device) - Hydraulic system - PTO (Power Take-Off) - Pump - Slider - Space Cab = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 12,318 kg, Curb weight: 8,182 kg, Gross weight: 20,500 kg, Total tank capacity: 845 liters, Fifth wheel height: 116 cm, Fifth wheel type: Slider, Number of differentials: 1, Suspension type: Air suspension, Cabin type: Space Cab, Cruise control, Tachograph (monitoring device), Digital tachograph, Air conditioning, Standalone air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Speed limiter, Lane departure warning system, Climate control, Heated seats, Blind spot monitoring, Flashing lights, Engine power: 340 kW (456 HP), Fuel: Diesel, Emissions standard: Euro 6, Transmission type: AS-Tronic, Transmission manufacturer: ZF, Speed limiter, Gears: 12, Power steering, ABS, ASR, Hydraulic system, PTO (Power Take-Off), PTO type: 1, Starter battery, Pump, Central locking, Seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: ZF, 12 gears, automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steering axle; Tire tread left: 4 mm; Tire tread right: 3 mm; Suspension: leaf spring Axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread inside left: 6 mm; Tire tread outside left: 8 mm; Tire tread inside right: 5 mm; Tire tread outside right: 6 mm; Suspension: air suspension Weights Empty weight: 8,182 kg Payload: 12,318 kg Gross Vehicle Weight (GVW): 20,500 kg Functional Pump: Yes Interior Number of seats: 2 Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration number: 31-BGX-2 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands across different model years and price ranges. Phedpewlz A Rjfx Aa Esa Why buy from Kleyn Trucks? Simple! • Large, fast-rotating inventory • Recognizable quality • Competitive prices • Professional business conduct • We speak multiple languages • We understand our customers • Assistance with import and transport • (Export) number plates arranged quickly • Expert technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send a request via our website. Ask about our European warranty package directly.

Condition: good (used), axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,610 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,990 mm, color: white, Year of construction: 2019, Equipment: tail-lift, Axle configuration Podpfoxwv Hrex Aa Eeha Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 8.380 kg Carrying capacity: 30.620 kg GVW: 39.000 kg Functional Tail lift: Dhollandia DHSMR.20, slider lift, 2000 kg Make of bodywork: Fruehauf Plywood Box Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 1994, Panel saw F 90 with 3 m sliding table Pjdpsx Nrxkofx Aa Eoha Cutting width: 1050 mm Max. saw blade diameter: 450 mm Motor power: 5.5 kW – 3 speeds Height adjustment: via handwheel Digital display for speed indication Cross table Extraction hood Location: ex customer site - immediately available -

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Pjdpox Nm Utofx Aa Esha Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: used, Year of construction: 2009, total length: 4,100 mm, total height: 3,050 mm, total width: 1,800 mm, Empty weight: 5.000 kg Price: On request - Year: 2009 Phedjx Ig Svspfx Aa Eoa - Documentation available: No - CE certificate present: No - Serial number: 1442 - Main motor power [kW]: 37 - Rotation speed [rpm]: 1480 - Hydraulic unit power [kW]: 2.2 - Rotor width [mm]: 1000 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 1050 - Opening length [mm]: 1300 - Sieve perforation [mm]: 25 - Number of rotating knives [pcs.]: 26 - Transport dimensions: 4100mm x 1800mm x 3050mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. Phedpfx Asiyynwja Eja More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: excellent (used), Year of construction: 2017, Used machine F45 Pro Drive Year of manufacture: 2017 Pjdex Nru Espfx Aa Esha Template holder Max. saw blade diameter: 450 mm Motor: 5.5 kW Double roller carriage: 3200 mm Table extension: 840 mm Digit-L angle/miter fence 1100 mm CNC rip fence 2-axis scoring unit Rapido scoring system LED lighting Duplex double-sided miter fence Location: ex customer site - immediately available -

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details grinding length 2000 mm grinding width 850 mm distance spindle center to table 900 mm control Siemens 840 D total power requirement 155 kVA weight of the machine ca. 15 t dimensions of the machine ca. 8815 x 4185 x 2963 mm Additional information CNC Precision Surface and Profile Grinding Machine Technical Specifications: Grinding length 2000 mm Grinding width 850 mm Travel, transverse 750 mm Distance from table to spindle center 900 mm (or 800 mm with intermediate plate) Magnetic plate size 2000 x 700 mm Table load without magnet 3500 kg Table speed 60 m/min. Spindle drive 26 kW Grinding wheel dimensions 500 x 150 x 203.2 mm Grinding wheel peripheral speed 35 m/s Equipment: 3-axis contouring control Siemens 840 D Grinding programs: Full-cut grinding Face grinding Plunge grinding Path grinding X/Y-axis and Y-Z-axis Profile grinding Automatic program sequence with roughing, finishing, fine finishing and spark-out grinding. Multiple plunge grinding for economical production Surface grinding with continuous, continuously programmable cross feed Grinding wheel calibration Plunge/step grinding Face grinding Dressing in the grinding cycle with lift-off amount Fully automatic compensation of dressing amounts Tool management AC servo drives with ball screw and absolute measuring system in the X, Y, and Z axes Preloaded precision roller guides in the X, Y, and Z axes with linear guides Portable electronic handwheel Automatic belt filter system Coolant heating Electro-permanent magnetic chuck Fully enclosed Direct measuring system in the vertical axis Temperature-controlled machine bed for consistent accuracy Linear motor in the X-axis, table speed max. 60 m/min. Swiveling control panel Continuous speed control of the grinding spindle Electrical linear measuring device for cross-travel adjustment with zero point setting in any position, resolution 0.001 mm Electro-mechanical locking via position control of the headstock in the cross direction for profile and plunge grinding Mechanical extraction of coolant mist TAG table dresser Pre-profiling dresser VPG 190 Diamond grinding wheel, 190 mm diameter Software program for pre-profiling dresser VPG Rough profiling (roughing) CNC table profile dresser TAD 190 Profile depth max. 45 mm Contour accuracy +/- 0.0025 mm Swivel angle +/- 65 degrees Max. dressing speed 210 mm/min. Diamond wheel for table dressing machine TAD 190 Regrinding package for diamond wheel Intermediate plate for raising the magnet WinWop profiling software Import of CAD profile data Pedpfxox Nm Exs Aa Esha SP 60 JOB Listing expansion package Additional holes for the magnet clamping plate to facilitate removal of workpieces using compressed air Ghost shift circuit for shutting down the machine after the end of the program

Condition: good (used), Year of construction: 1995, Machine-Details : Podpfx Aex Nibpoa Ejha Stock-No. 1022-2330 Type of machine Internal and Face Grinding Machine Make GLAUCHAU Type SIP 400x500 Year of manufacture 1995 retrofit Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information : Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: excellent (used), Year of construction: 2009, Machine-Details : Stock-No. 1022-2352 Type of machine Gear Hobbing Machine - Horizontal Make MONNIER & ZAHNER Type KOEPFER MZ 120 Year of manufacture 2009 Type of control CNC Storage location Monheim (Germany) Country of origin Switzerland Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information : The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = Psdpfx Aex Nh Stja Eoha X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW