Used Excello for sale (8)

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Itjdpfot Hw D Dox Afxji Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, table load: 400 kg, spindle speed (max.): 16,000 rpm, number of axes: 4, This 4-axis EXCELLO XHC 241 M/3 was manufactured in 2003. It features a maximum spindle speed of 16,000 RPM and a 500 mm pallet with a maximum load of 400 kg. The machine is equipped with a 120 station automatic tool changer and offers rapid traverse rates of up to 120 mm/min. If you are looking to get high-quality machining capabilities, consider the EXCELLO XHC 241 M/3 horizontal machining centre we have for sale. Contact us for further details. • Pallet size: 500 mm • Pallet change time: 7 s • ATC capacity: 120 stations Iodpey Ry Hlsfx Afxoti • Spindle taper: HSK-A63 • B-axis: 360,000 positions, 0.001° increment • Feed rate (X/Y/Z): up to 120 mm/min • Rapid traverse (X/Y/Z): 120 mm/min • B-axis rapid traverse rate: 100 (unit not specified)

Condition: used, table length 1000 mm table width 1000 mm table load / t weight 1100 kg table height 100 mm Itodjgrndiopfx Afxei

Condition: used, Year of construction: 1960, centre distance 1200 mm 550 weight of the machine ca. 2,5 t Iodpfx Afjx U A Igexsti

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg Itodpfxoyw N Irs Afxji X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 Itsdpfx Afeurt Tlsxsi docs available ball groove milling for CV constant velocity joints - homokinetic joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: ready for operation (used), EXCELLO DLZ 500 LZ - 3 Meter Turning Length / Lead and Feed Screw Lathe - Centre height: 250 mm - Centre distance: 3000 mm - Swing diameter over bed: 500 mm - Swing diameter over cross-slide: 310 mm - Spindle bore: 65 mm - Spindle speeds: 28 - 1400 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric etc. - 3-jaw chuck 250 mm - 4-jaw chuck 250 mm - Multifix toolholder with inserts Ijdpfsyntkqsx Afxoti - Steady rest - Tool cabinet - Documentation Dimensions (LxWxH): 5.5x1.4x1.6 meters / Weight: 3800 kg Subject to errors and input mistakes

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS Isdpfod Nw Ttjx Afxeti workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv