Horizontal machining center

EXCELLO XB 420

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Pedpfeya Dtmox Altopu

Condition: good (used), TECHNICAL DATA Podsu Uic Tjpfx Altepu AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm Podpfxst Hw N To Altopu threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Ppjdpexf Iamsfx Altsu Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system Pedpfx Aewqb Scjltspu - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic - Ram stroke: 850 mm - Number of blows per minute: 100 Psdpfx Alow Sdxaotepu - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm - Total machine height: 4380 mm - Total weight: 35 t

Condition: good (used), Year of construction: 2002, functionality: fully functional, Initial commissioning: 2002 Podpfx Asyzz R Hjltspu Control: Heidenhain iTNC530 Machine hours: to follow X-axis: approx. 6,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,100 mm A-axis: C-axis: 2-axis milling head Spindle speed: max. 14,000 rpm Additional equipment - Double-sided enclosure Machine condition Fully functional, in very good condition. Machine remains powered and is available immediately.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Podpeuz If Nofx Altopu Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen M32-2M3 CNC Swiss-type Turning Machine Year of manufacture: 2002 Control: Mitsubishi Meldas 635 Max machining diameter: 32 mm Ppjdox Dncfopfx Altou 7 controlled servo axes: X1/Z1/Y1/X2/Z2/X3/Z3 4 driven tools on the vertical holder C-axis: main and sub spindle Including accessories: FMB Turbo 5-42 bar feeder Extraction system Parts conveyor 5 driven tools for turret 5 standard holders (turning/boring holders) for turret - Available immediately -

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, A used CNC turning and milling center Pedoy D Tz Njpfx Altjpu Main and counter spindle C axis Y axis Further technical data will be added.