Used Ex Lamp For Injection Room for sale (59,982)

Year of construction: 2003, condition: ready for operation (used), Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. Rcodjmrri Dspfx Aa Eek

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, clamping force: 150 kN, screw diameter: 16 mm, displacement volume: 10 cm³, total length: 25,000 mm, total width: 860 mm, overall weight: 1,700 kg, Type: NEX15-1E Year : 2011.09 Screw size: 16mm Max opening distance: 160mm Max ejector travel: 50mm Min mold height: 130mm Max mold height: 260mm Distance between tie bars: 260*260mm Mold table size: 370*370 Mold ring size: 100mm Bulkhead volume: 10cm3 Shot weight: - Water battery: 6 channels Core pull: - Sockets for color dosers: - Interface: Euromap 67 Hot runner control: 4 zones Electrical outlets on machine: 2 x 32amp 3phase Machine consumption: Heater 3kw, motor 7,5kw Rcjdpfxstmtpte Aa Eek

Condition: like new (used), Year of construction: 2011, operating hours: 1,342 h, functionality: fully functional, clamping force: 150 kN, screw diameter: 16 mm, displacement volume: 10 cm³, total length: 25,000 mm, total width: 860 mm, overall weight: 1,700 kg, Type: NEX15-1E Year : 2011.09 Screw size: 16mm Max opening distance: 160mm Max ejector travel: 50mm Min mold height: 130mm Max mold height: 260mm Distance between tie bars: 260*260mm Mold table size: 370*370 Rcodjtmtnlepfx Aa Ejk Mold ring size: 100mm Bulkhead volume: 10cm3 Shot weight: - Water battery: 6 channels Core pull: - Sockets for color dosers: - Interface: Euromap 67 Hot runner control: 4 zones Electrical outlets on machine: 2 x 32amp 3phase Machine consumption: Heater 3kw, motor 7,5kw

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter Rcjdpjicic Hjfx Aa Eek - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Rodpomquwqefx Aa Esck Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: excellent (used), I am offering a complete industrial process pump with ATEX (EX) explosion-proof design, mounted on a robust steel skid frame. The unit is ready for immediate use in industrial installations, including hazardous (explosive) zones. Pump manufacturer: Victor Pumpen GmbH (Germany) Model: R40 KM6TM +2A / 88RF38+693De/6-K Electric motor: CEMP (Italy) • Power: 1.5 kW • Three-phase 230/400 V • 1,400 rpm • Protection class IP55 • Explosion-proof execution Ex d IIB T4 Gb • ATEX / IEC 60034 certification Gearbox: Siemens – EX version • ATEX Certificate II 2D c T120°C • IP55 • Gear oil: CLP VG 220 • Output speed up to approx. 72 rpm Features and equipment: • Complete unit on mounting skid • Coupling guard • Connection flanges • Pressure gauge • Heavy-duty industrial construction • Excellent visual condition Applications: Rcedpfx Asx Ndbwoa Esk The pump is designed for transferring oils, fuels, resins, adhesives, solvents, and other process media. It is ideal for use in the chemical and petrochemical industries, paint shops, EX installations, and applications requiring continuous operation and stable pressure.

Condition: used, Year of construction: 1965, multifix ja centre distance 1500 mm documentation ja Rcedoxylq Ejpfx Aa Ejk weight of the machine ca. 3 t

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Rcodpfxsxdfabs Aa Esk Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: used, Technical details: weight of the machine approx.: 8kg kg dimensions L x W x H: Ø 160mmx 85 mm m Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm Redpfeu N Dw Dsx Aa Eeck *

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Rsdpfxsnxi H Us Aa Eock Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Rcodpfxewu Du Ie Aa Eok Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Rcsdpfoxbd U Eox Aa Ejk

Year of construction: 2005, condition: used, tool adaptor 50 mm driven tools 5 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Rodpfogtyhrjx Aa Eeck +++++

Condition: used, table length 1000 mm table width 1000 mm table load / t weight 1100 kg table height 100 mm Rsdpfegrndiex Aa Ejck

Condition: used, C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools Rodpfx Asr R Abhja Ejck -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 3x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

Condition: used, functionality: unexamined, spindle bore: 81 mm, turning diameter over bed slide: 650 mm, center height: 320 mm, turning length: 1,500 mm, Used lathe, see pictures. With Sony digital readout and 660mm faceplate. Year of manufacture: 1976. All technical specifications in the last picture. NOTE: The type plate states XD500, but it is actually an XD630, according to the dimensions and delivery note. Rcjdpfx Aaewm Rvio Ejk Center distance: 1500 Trajectory length: 2500 Center height: 320mm With taper turning direction, side guide

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features Rjdpfxjt Hw D Do Aa Ejck * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Ex-Cell-O XG620 Excello XG 620 Siemens CNC overhauled 2011 docs available Rcjdpfsurt Tlex Aa Esk ball groove milling for CV constant velocity joints - homokinetic joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Condition: good (used), Index GE42 Clamping cylinder GG2713.2101 good order Rcjdofbup Rjpfx Aa Esk

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Rcedpfod Nw Ttsx Aa Eok Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: used, VERTICAL CLAMP HYDRAULIC PRESS FOR SOLID WOOD PANELS TRIMWEX - Working dimensions 6100x1300 mm - Working thickness 180 mm - N. 11 vertical cylinders Rcjdjwr A U Uspfx Aa Eok - N. 8 horizontal cylinders

Condition: good (used), High-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 0.12 kW -Speed: 2780 rpm -Volume output: 252 m³/h -Pressure increase: 240 Pa Rcedsd D Ri Njpfx Aa Ejk -Inlet connection: Ø 142 mm -Output connection: 56 x 52 mm -Quantity: 1x blower available Price: per piece -Dimensions: 270/180/H160 mm -Weight: 4.8 kg

Condition: excellent (used), axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,450 mm, loading space width: 2,550 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Very nice 2012 BURG 20FT ADR swap body chassis with SAF axles and disc brakes (INTRADISC), ADR (EX/II, EX/III, FL, AT), ABS/EBS, 1st and 2nd axles are lift axles, unladen weight: 3,690 kg, max. weight: 39,000 kg, 385/65-R22.5 tyres (left: 10/11/11 mm; right: 8/12/11 mm), Dutch registration. = Further Information = Axle configuration Tyre size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; max. axle load: 9,000 kg; tyre tread left: 60%; tyre tread right: 50% Rear axle 2: Lift axle; max. axle load: 9,000 kg; tyre tread left: 70%; tyre tread right: 75% Rear axle 3: max. axle load: 9,000 kg; tyre tread left: 70%; tyre tread right: 70% Redpfx Aexu A T Tja Esck Weights Unladen weight: 3,690 kg Payload: 35,310 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: BURG O-3-CC A7 Condition Technical condition: very good Visual condition: very good Identification Registration number: OL-67-RJ Further information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 10/2012, loading space length: 9,450 mm, loading space width: 2,550 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,790 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - ADR Rodpfx Aaoxr U Iko Ejck - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Notes = Very nice 2012 BURG 20ft ADR swap body chassis equipped with SAF axles with disc brakes (INTRADISC), ADR (EX/II, EX/III, FL, AT), ABS/EBS, 1st and 2nd axle are lift axles, ALCOA wheels, unladen weight: 3,690 kg, max. gross weight: 39,000 kg, 385/65-R22.5 tyres (L: 11/7/10mm; R: 11/8/10mm), Dutch registration. = Further Information = Axle Configuration Tyre size: 385/65 R22.5 Axle brand: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: alloy wheels; lift axle; max. axle load: 9,000 kg; tyre tread left: 70%; tyre tread right: 70% Rear axle 2: alloy wheels; lift axle; max. axle load: 9,000 kg; tyre tread left: 45%; tyre tread right: 50% Rear axle 3: alloy wheels; max. axle load: 9,000 kg; tyre tread left: 65%; tyre tread right: 65% Weights Unladen weight: 3,690 kg Payload: 35,310 kg Gross vehicle weight: 39,000 kg Functionality Body brand: BURG O-3-CC A7 Condition Technical condition: very good Visual condition: very good Identification Registration number: OL-09-TR Further Information Please contact Arne Honingh for further information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 06/2012, loading space length: 9,450 mm, loading space width: 2,550 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2012, Equipment: ABS, = Additional options and equipment = - ADR approval - EBS (Electronic Braking System) - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Very nice 2012 BURG 20FT ADR swap body chassis with SAF axles featuring disc brakes (INTRADISC), ADR (EX/II, EX/III, FL, AT), ABS/EBS, 1st axle + 2nd axle = lift axles, unladen weight: 3,690 kg, max. gross weight: 39,000 kg, 385/65-R22.5 tires (L: 9/7/13mm; R: 8/9/14mm), Dutch registration = Further information = Axle configuration Tire size: 385/65-R22.5 Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; max. axle load: 9,000 kg; tire tread left: 55%; tire tread right: 50% Rear axle 2: Lift axle; max. axle load: 9,000 kg; tire tread left: 45%; tire tread right: 55% Rear axle 3: max. axle load: 9,000 kg; tire tread left: 80%; tire tread right: 90% Weights Unladen weight: 3,690 kg Payload: 35,310 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG O-3-CC A7 Rodpfx Aaoviua So Esck Condition Technical condition: very good Visual condition: very good Identification License plate: OL-24-RX Further information Please contact Arne Honingh for more information.