Used Eps Shredder for sale (2,587)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy Hnodpfx Ajx S I Umsg Uog – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net Hnjdpfx Aed E R D Seg Uog (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, functionality: fully functional, total width: 2,400 mm, total length: 110,000 mm, total height: 2,850 mm, rotational speed (max.): 2,100 rpm, overall weight: 20,000 kg, power: 209.62 kW (285.00 HP), transport length: 10,500 mm, transport width: 240 mm, transport height: 395 mm, Equipment: rotational speed infinitely variable, WERT PHANTOM mobile shredder on crawler chassis for various applications - wood - waste - tires - glass - paper - Building rubble - Light scrap Tooling according to customer requirements Equipment: Power: 205 KW - 285 HP Caterpillar C7.1. stage 5 Transmission: 2x 125,000 NM Optionally synchronous or asynchronous shaft rotation Hnedpfx Astty Hheg Ueg Hydraulics: Linde Belt width: 1000mm Discharge height: 3300 mm Magnet: Optional Spiral fan: standard Radio : standard Water spraying: standard Weight: 20 tons Dimensions L/W/H : 11x2,4x2,85m

Condition: used, Year of construction: 2008, operating hours: 54,000 h, functionality: unexamined, Lindner Jupiter 3200 slow-speed single-shaft pre-shredder including hydraulic unit and control cabinet Hodpjx R S Sgofx Ag Ujng Operating hours: 54,000 bh Machine has been regularly maintained and overhauled Application: Shredding of commercial and industrial waste,

Condition: ready for operation (used), Year of construction: 2010, Technical Specifications Specification Detail Hodoxlcvcepfx Ag Ueng Motor Power 2 × 15 kW (Total 30 kW) Cutting Chamber (L × W) 1,074 mm × 524 mm Distance Between Shafts 192 mm Rotor / Shaft Type Twin-shaft, hexagonal (85 mm A/F), counter-rotating Knife Diameter 260 mm Knife Thickness 15.5 mm Overall Dimensions (L × W × H) 2,770 mm × 1,460 mm × 2,700 mm Approx. Weight 2,100 kg Drive Type Electric, geared reducers Construction Heavy-duty steel frame, self-cleaning shafts Throughput (typical) 0.5–3 t/h depending on material type and knife configuration ♻️ Suitable For Plastic lumps, profiles, film, and containers Wood waste, pallets, and offcuts Electrical and electronic scrap (WEEE) Light metals, cans, general waste Paper, cardboard, and confidential document shredding

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes Hsdpfxow Niuhe Ag Usng 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: excellent (used), CATALOG NUMBER 7191 TECHNICAL DATA - Loading hopper inlet: 870x735 mm Hodpfx Agex Syqgo Ujng - Rotor working width: 720 mm - Main motor: 18.5 kW - Pump motor: approx. 0.75 kW - Number of knives: 17 pcs - Knife size: 80x40 mm - Screen: 20 mm - Pressing drawer - Electric auto-reverse - Outlet for shredded wood: Ø250 mm - Dimensions (L/W/H): 2000x1350x1370 mm - Weight: 1586 kg ADVANTAGES – Pressing drawer – Very good condition – Used shredder Net price: 38,900 PLN Net price: 9,260 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant rate variations)

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Condition: Single-shaft shredder is equipped with a good set of blades. -Manufacturer: Vecoplan, Side-mounted mill cutting mill -Type: VAZ120/105 -Processing capacity: 200-3000 kg/h -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces -Number of counter blades: 1 piece -Inlet cross-section: 1240 x 1075 mm Hnodsxlcqtspfx Ag Uog -Rotor width: 1075 mm -Rotor diameter: 230 mm -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg

Condition: new, fitted in Hammel VB650/750 Lindner U75 Arjes VZ750 Shredder Shafts ( NEW ) in set MADE IN GERMANY all types availlable WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness. Hnodpfx Asfgl Naeg Usg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, overall weight: 3,200 kg, rotor diameter: 5,000 mm, rotational speed (max.): 18 rpm, power: 22 kW (29.91 HP), rotor width: 8,000 mm, Shredding chamber 750 x 700 mm Number of cutting discs: 16 pcs Hnedpfx Agsx U U Ulj Uog Number of scrapers: 2 pcs Power: 22 kW Technical condition: very good

Condition: good (used), Year of construction: 1997, Slow-speed shredder with moving floor Hjdsx Ed Ruopfx Ag Ujng Rotor width: 800 mm Motor: 11 kW

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Hodpfxexrtt Eo Ag Usng Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm Hnodpfsx Syppox Ag Uog - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: new, Year of construction: 2023, Vecoplan V-ECO 900, a plastic shredding machine with a capacity of up to 1,000 kg/h. The machine is brand new and in its original packaging. New, originally packaged Brand and model: Vecoplan V-ECO 900 Processable materials: All polymers Hnedpfx Ajx U T Ahog Ujg Type: Shredder Brand: VECOPLAN V-ECO 900 Year of manufacture: 2023 Technical data: Rotor working width: 900 mm Rotor diameter: 370 mm Number of rotor knives: 42 (in standard configuration) Rotor speed: approx. 130 – 160 rpm Capacity: 400 to 1,200 kg/h – depending on material type, blower, and feed rate Drive power (ESC motor): Standard: 30 kW / 37 kW / 45 kW Feed opening: approx. 900 x 1,100 mm Machine weight: 5,200 kg

Condition: used, machine/vehicle number: 13389, Rotor diameter: 390 mm Rotor width: 850 mm Hodpfxex Hlgpo Ag Usng Rotor knives: 60 Stator knives: 1 row Infeed cross-section approx. 1300 x 850 mm Drive motor: 37 kW

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Hnjdpfx Agjx Nkhqe Uog Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: good (used), Year of construction: 1998, Slow-speed unit with hydraulic moving floor Hnjdpjx Dq Absfx Ag Ueg Rotor width: 1000 mm – ideal for pallets Rotor diameter: 300 mm with 24 knives installed Motor: 22 kW With discharge auger Screen perforation: 25 mm

Condition: used, Year of construction: 2019, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: #005, overall weight: 46,100 kg, control cabinet length: 5,000 mm, control cabinet width: 2,400 mm, control cabinet height: 2,600 mm, power: 450 kW (611.83 HP), type of input current: DC, rotational speed (max.): 32 rpm, Equipment: rotational speed infinitely variable, Equipment - 450 kW DC power – with ABB frequency inverter including DTC control - Bevel helical gear unit – roller speed up to approx. 32 rpm / variable via belt drive and inverter control - BioPower roller with 42 teeth - Roller length 3,000 mm, Ø 800 mm - Infinitely variable speed control - Tooth type: form C3 trapezoidal tooth, 174 mm - Wear-resistant armor plates on the roller - Hydraulically adjustable counter comb – cutting gap adjustment via display Hedpsx I A Akjfx Ag Uong - 4 comb cylinders - Central lubrication system - Hydraulically opening comb hatch - Pre-assembled main control cabinet - Local operator panel at the machine - Start-up warning system - Engine compartment lighting - Paint finish: RAL 2011 deep orange The machine is equipped with the following additional features: - Mounting strip for limiter - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine frame height: 1,200 mm - 3-sided hopper extension, left or right - Flashing light module - Solenoid valve for water spraying device - Radio remote control (EU) - Profibus integration - 2 additional power outputs on the control cabinet, up to 7.5 kW each - Control cabinet container / air-conditioned, LxWxH 5,000x2,400x2,600 mm The machine can receive comprehensive reconditioning at our factory upon request. - OPTIONAL ONLY: Discharge conveyor belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Miscellaneous: - Display in German; English available - Stickers and operator panel labeling in German; English available - Warning stickers in German; English available - Operating manual in German (print and digital) (can be translated for local requirements)

Condition: excellent (used), CATALOG NUMBER 7240 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 210 mm - Shaft width: 530 mm - Shaft diameter: 500 mm - Knife length: 530 mm Hjdpfx Agox Sypco Uong - Number of knives: 2 pcs - Screen dimensions: 55x50 mm - 2 toothed feed rollers from below - Lower roller motor approx. 3 kW - Toothed feed roller from above - Upper roller motor 1.5 kW - Feed belt length: 4600 mm - Feed belt width: 400 mm - Main motor: 55 kW - Autoreverse - Feeder dimensions (L/W/H): 4630x620x760 mm - Machine dimensions (L/W/H): 2510x1700x1200 mm - Weight approx. 3500 kg – German made - Autoreverse (adjustable) – Used shredder, in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on rate 4.2 EUR (Prices may change in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition Hedpex Sym Ijfx Ag Ueng – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7262 TECHNICAL DATA - Top loading hopper inlet 780x620mm - Bottom loading hopper inlet 650x620mm - Outlet for shredded wood Ø160mm - Rotor working width 600mm - Rotor diameter 248mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives 30 pcs - Knife dimensions 30x30mm - Screen 20x20mm - Press drawer Hnedpfox Swq Rox Ag Usg - Electric auto-reverse - Dimensions (L/W/H): 1750x1200x1650mm - Weight 1200kg ADVANTAGES – German-made – Original DTR documentation – Not repainted – Auto-reverse system – Press drawer – Very good condition – Used wood chipper Original photos Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate (4.2 PLN/EUR) (Prices may vary with larger currency fluctuations)

Condition: excellent (used), Year of construction: 2001, CATALOG NUMBER 7089 Hnedpfxjx R Dxls Ag Usg TECHNICAL DATA - Loading hopper opening: 1020x1230mm - Rotor working width: 1020mm - Rotor diameter: 348mm - Main motor: 22kW, 400V, 50Hz - Pump motor: 0.75kW - Number of knives: 50 pcs - Knife dimensions: 35x35x20mm - Screen: 12mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse – Like WEIMA WL 10 – German made – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: 105900 PLN Net price: 25200 EUR depending on the 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - Infeed width: 740mm - Infeed height: 300mm - Shaft width: 780mm - Shaft diameter: 1000mm - Knife length: 780mm - Number of knives: 2 pcs - Screen dimensions: 55x55mm - Bottom: 4 toothed feed rollers - Lower shaft motor: 5.5kW Hjdpfx Agjx R Dxfe Uong - Top: 3 toothed feed rollers - Upper shaft motor: 5.5kW - Belt conveyor feeder - Length of belt feeder: 4300mm - Width of belt feeder: 600mm - Feeder belt drive motor: 2.2kW - Main motor: 90kW - Reverse - Autoreverse - Overall machine dimensions (L/W/H): 4600x2350x1700mm - Overall feeder dimensions (L/W/H): 4550x980x970mm - Total weight: approx. 11,000kg – German-made – Autoreverse (adjustable) – Used shredder, in very good condition Net price: 265,900 PLN Net price: 63,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm Hedpfx Aemgbt Ijg Usng - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers Hjdpfxotrwt Ne Ag Uong - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW - Autoreverse - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)