Used Energy Production for sale (17,218)

Condition: used, mileage: 41,069 km, power: 125 kW (169.95 HP), first registration: 11/2020, fuel type: diesel, empty load weight: 1,866 kg, overall weight: 2,985 kg, next inspection (TÜV): 02/2028, fuel: diesel, color: black, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 3, total length: 4,999 mm, construction height: 1,970 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, soot filter, traction control, * Scheduling an appointment for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn’t spend it waiting. Therefore, we kindly ask you to arrange a telephone appointment for a consultation or test drive. * Service booklet * Non-smoker vehicle * Automatic headlight activation * LED daytime running lights * On-board computer * Diesel particulate filter * Fog lights * Light and rain sensor * Cruise control * Rain-sensing wipers * Keyless entry * Safety package * Clear-view package * Metallic paint * Full-LED headlights with C-shaped LED signature * Front and rear parking assistance with rearview camera * Tire pressure monitoring system * Passenger side airbag * Front side airbag * Reinforced wooden floor in cargo area * Partition wall with window in cargo area * Heated seats * Cabin seats: Convertible dual passenger seat * Rear swing doors with glazing (opening angle 180°) * Right-hand sliding door in loading/passenger area with glazing * Full wheel covers * Body/build: Standard panel van * Pre-wiring for body electrical systems * Rear fog light * Heat-insulating glazing * Tachometer * Cabin air filter: Pollen filter * Seat cover/upholstery: Fabric * Cabin seats: Passenger seat with armrest * Cabin seats: Driver's seat with armrest * Cabin seats: Comfort driver's seat with 3-way adjustment * Side tie-down rings in cargo area * Glove compartment with cooling function * Wheelbase: 3098 mm * Tire repair kit * Adjustable steering column (steering wheel) * Traction control system (ASR) * Drive type: Front-wheel drive * Battery: 85 Ah * 6-speed dual clutch transmission Kedsyndi Dopfx Aaloww * Low emission according to Euro 6d-TEMP standard * Fuel tank: 80 liters * Engine stop/start system * Engine: 2.0 liter - 125 kW dCi Diesel Energy * Model: TRAFIC III X82 VAN * Equipment level E1 * Interior equipment control code 03 * Engine index control code 710 * Generation 1 control code * Deluxe 1 equipment package control code * H01 equipment package control code * Sound & Climate package incl. navigation system * Solid metal sidewall * Solid metal rear sidewall * Body color code 0 * Rear window wiper * Heated rear window * Passenger/cargo compartment windows: Partially glazed * Audio/navigation system with color touchscreen (Media Nav) * Wood interior trim in passenger/cargo compartment * Cabin seats: Heated driver and passenger seats * Seat cover/upholstery: Fabric Kompo * Seat cover/upholstery: Velour * Passenger/cargo area seats: 2nd row omitted * Passenger/cargo area seats: 3rd row omitted * Steel wheels 7x16 * Energy recovery (Energy Smart Management) * 6-speed dual clutch transmission (EDC) * SCR system (AdBlue technology) * Emission reduction level 1 * Engine: 2.0 liter - 125 kW dCi Diesel FAP Energy CAT * Technical directive RP09 control code * And much more * The above information is provided without guarantee. It does not form part of the agreed properties. Subject to errors and prior sale. * Our service offerings: * Financing available with or without down payment * Registration service * Trade-in of your old vehicle * Delivery possible * Tire service, winter and summer tires available for an extra charge * We speak various languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MB440, Machine data: Kedpfoxdwphjx Aaleww Manufacturer: Rjukan Metall Model: Masterbend MB440 Year of manufacture: 2001 This machine can process all common spacer profiles (aluminum, stainless steel, Chromatech ultra / TGI) using a single tool (without conversion). The machine bends three corners and assembles one corner with a connector. The unit is fully functional (a video can be provided upon request) and is available immediately. Collection only in 92224 Amberg, no shipping. Inspection possible by prior appointment.

Condition: used, Year of construction: 2003, machine/vehicle number: 20520, Trennsäge - Splitting Saw Metris MT 817Year 2003 - Serial-No. 020520P Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ksdpfx Aaeh Axn Dslsww

Condition: good (used), 400mm wide screw feed former with control screen upgrade by GEA. Has been used for production of vegetarian burgers. Can be supplied with other machines to make a complete coating and frying line. Kedox Almfepfx Aaleww

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Hardware Assembly Table – Emmegi BMF 3400 Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 Kodpfx Aaoywkc Relsww The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: used, Mitteltrennschnitt Einrichtung / Centre Cut for Double Production Müller Martini 360 Baujahr / Year 2007 - Serial-No. For Müller Martini Saddle Stitcher Type 360 - 4/5th trimmer knife attachment Mitteltrennschnitt Einrichtung für Müller Martini Sammelhefter Type 360 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Kedpfjwryppsx Aaleww

Condition: used, Karten- und Warenprobenkleber - Card and Product Sample Adhesive Kolbus KI 224 ZU Baujahr / Year 2003 - Serial-No. 356009 For cards, envelopes, bags and booklets of the following formats: Für Karten, Umschläge, Taschen und Hefte in folgenden Formaten: Format / Size min. 40 x 60mm - max. 220 x 350mm Geschwindigkeit / put 18.000 Ex/h (depending on type, size and  properties of base and product up to) Heißleim Schmelzgerät / Hot Glue (commercial products) Nordon 3100V-3EA Aufbau, zum Anbau an der Zusammentragmaschine, Design / compat appliance for attachment to a collating machine Antrieb über Zahnriemen von der Hauptwelle zur ZU 840 / Drive toothed belt from main shaft to ZU 840 Steuerung: Elektronische, interaktive Mikroprozessor-basierte Steuerung mit Einstellung von Vorlaufzeit und Leimstreifenlänge /  Control: micro-processor based control unit with adjustment of lead-time and length of the glue  Kwodowqftkjpfx Aalsw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2006, machine/vehicle number: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of construction: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Comes with an additional linear tool magazine (120 positions), 2 four-axis machining heads for simultaneous processing (20kW), automatic loading and unloading tables. Optionally, a comprehensive tool package is available (tool holders, angle heads, profile heads). Currently the machine is in continuous use. The machine was purchased in 2024 after a complete overhaul. Since then, it has operated for 15 months on a single shift. Technical specifications: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The max. working length is achieved by multiple transfer of the part in the clamp. Spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 1: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 Spindle no. 2: Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 2: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 External magazine: - Magazine type: linear - Magazine capacity: 120 tools - Holder spacing: 80 mm - Tool holder type: HSK F 63 Loading table: automatic cross-feed Unloading table: automatic cross-feed CNC control: PLC: Siemens S7 Mobile control panel Control computer: - Operating system: Microsoft Windows - Modem for data transfer and diagnostics - Touchscreen Siemens Sinumerik 840 D Number of axes: 4 Kedoyu Sn Ujpfx Aaleww The machine is in full working order and is currently in continuous production. For an additional charge, a comprehensive range of accessories is available: 8 angle heads, a package of 3 standard tool holders, and a package of 17 new arbors for heads.

Condition: refurbished (used), functionality: fully functional, overall weight: 600 kg, type of input current: AC, Watkiss PowerSquare 224 Offline / Manual Operation The machine is in very good condition. The PowerSquare is not only versatile but also extremely easy to operate, producing unbeatable professional brochures. • Booklet maker for brochures up to 56 sheets / 224 pages with 80 gsm paper • High-performance wire-stitching head (completely overhauled) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Automatic size setting, automatic wire length adjustment • 2 brand new front trimming knives! • 1 to 6 stitches, evenly distributed along the spine. Stitch-free brochures also possible. • Wire from spool: up to 291,500 stitches • Machine has been completely overhauled and operates flawlessly • Fully automatic machine setup • Immediately ready for operation / production starts from brochure 1 • Test run available on request • Automatic triggering • 230 Volt / 600 kg • Formats from 120 x 200 mm to 370 x 520 mm Produce unbeatable professional brochures with the PSQ 224 EUR 28,000.00 plus VAT. Shipping / delivery available. Kodpfx Aaexn Rdajleww All offers refer to used machines, which may show signs of previous use (such as minor scratches or yellowing). Collection possible, shipping possible, installation and training available.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 10.8 kW (14.68 HP), load capacity: 230 kg, lifting height: 18,200 mm, lifting power: 230 kg/m, platform length: 1,335 mm, platform width: 690 mm, overall weight: 3,100 kg, empty load weight: 3,100 kg, transport length: 4,396 mm, transport width: 1,095 mm, transport height: 1,990 mm, fuel type: hybrid, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 10 l, tire size: Rubberen rupsbanden (niet-markerend), tire condition: 100 %, wheelbase: 1,980 mm, ground clearance: 189 mm, color: red, Equipment: UVV, soot filter, tilting carriage, === KEY SPECIFICATIONS === Year: 2025 Operating hours: 1 h (new) Working height: 20.15 m Max. horizontal outreach: 9.70 m Platform capacity: 230 kg Platform dimensions (L × W): 1335 × 690 mm Turret rotation: 360° (non-continuous) Basket rotation: ± 62° Boom type: Articulated telescopic Jib: Yes (articulating jib ± 89°) Power source: Bi-Energy (Diesel + Lithium-ion battery pack 7.7 kWh) Drive system: Rubber tracks (non-marking) Stabilisers: Yes (automatic level system IIIS) Engine manufacturer: Kubota Z602 (Stage V) Emission class: Stage V Weight: 3 100 kg CE certified: Yes === HIGHLIGHTS === New generation Bi-Energy system for dual power operation – diesel or full electric. Automatic set-up and levelling with GPS and remote control. Quiet and zero-emission operation in electric mode. Kodpjxb Stcsfx Aaloww Compact design for indoor and outdoor applications. === CONDITION === Brand-new 2025 machine, fully tested and ready for work. Inspection available on request. === DELIVERY === Worldwide shipping available on request Price € 89.500 (EXW / excl. VAT). === DESCRIPTION === The Hinowa LL 20.10 MK3 Bi-Energy offers a 20 m working height and 9.7 m outreach with 230 kg platform capacity. Equipped with a Kubota Z602 Stage V diesel engine and a 7.7 kWh lithium-ion battery pack for silent electric operation. Features include automatic stabilisation, remote control and quick charging (80 % in 2 hours). === TRANSPORT === Crane loading on request. Flexible and secure shipping options available.

Condition: good (used), functionality: fully functional, With this offer, you are purchasing a used Plockmatic PBM350-m brochure production system. Item for sale: 1 x Plockmatic PBM350-m with the following equipment: Includes front trimmer Meter readings: Total: Approx. 23.900 brochures Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. Kjdjw Rxp Rspfx Aaloww For more information, please feel free to contact us personally.

Condition: new, Year of construction: 2025, functionality: fully functional, The AT-3000 is an advanced automatic pallet nailer designed for maximum efficiency and intuitive operation. It offers the flexibility to produce different types of pallets on a single machine by simply changing the template. Kwsdpfswq Izwjx Aaljw

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Kwjdpfx Aor I Ddksalew Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Condition: used, functionality: fully functional, Item: DP-0601-Pump APV W+30/80 APV - Centrifugal pump Brand: APV/SPX Type: W+30/80-3220 130 Kwsdex Tuu Aopfx Aalow Motor: 4.0 kW Speed: 2860 rpm Year: 1997 Inlet: 4" / Outlet: 3"

Condition: used, Year of construction: 2008, We are offering this used STORTI GSI / 170-TA9 pallet production machine, year of manufacture 2008. Complete line includes: Kjdpfx Aoyvggzoaleww Block-making unit 2 nailing machines Turners Brand marking (burning) Corner cutting Stacker Fully operational, was in use until recently. If you have any questions or need further information, please contact us by message or phone.

Condition: used, Year of construction: 2008, functionality: fully functional, Belt Conveyor/Conveyor Belt/Belt System Manufacturer: VanderLande Year of manufacture: 2008 Condition: Used With pneumatic energy NGGV-3500x1180 Total length: approx. 3500 mm Total width incl. motor: approx. 1180 mm Total width without motor: approx. 800 mm Belt width: approx. 700 mm Divided into 3 segments: 1x approx. 600 mm long 2x approx. 1250 mm long Conveying height: approx. 850 mm – height adjustable Material: Steel Color: Grey Includes SEW motor (2.2 kW) Includes support feet Stock: 8 units available Price per unit Article number: 2026012901 Kjdsyftphjpfx Aaloww The conveyor system was operational until removal. Condition: Fully functional, with signs of use Ideal for fast material handling Professionally disassembled and packed Thanks to the excellent build quality of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a custom offer or advise you on planning or installation questions. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and excellent network of specialists. We have already successfully implemented projects for companies in a variety of sectors, such as logistics, pharmaceutical industry, crafts, or electronics industry. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Model - SILVER 16/16 (16 x heads). Kwjdpoulpmzofx Aaljw Serial number - 528. Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until 14/10/2024, can be viewed working until this point.

Condition: ready for operation (used), A complete Axor pasta production line for short goods and nest goods Nidi with integrated pressing, cutting, drying and cooling line is available. Thermal output: 320000kcal/h, electrical power: 145kW, press cooling thermal energy: 25000kcal/h, pasta cooling thermal energy: 50000kcal/h. Number of dosing units: 2, dosing type: semolina dosing, press type: P-145 C-400, number of screws: 2, screw diameter: 145mm, drying tunnel dimensions X/Y: 2000mm/1500mm, total number of pasta frames: 550, pasta frame dimensions X/Y: 2000mm/1500mm, circulating frames: 440. Documentation available. An on-site inspection is possible. This is a complete pasta production line for nest goods, however longer pasta products can also be produced. Kedpfoykbglex Aalsww

Condition: used, energy chain, cable drag chain, energy guiding chain, cable chain, drag chain -Manufacturer: IGUS, energy chain cable drag chain 2 pieces -Length: 4250 mm -Width: 240 mm -Bending radius: 160 mm -Accessories: incl. clamps see photos -Transport dimensions: 920/890/H480 mm -Weight: 43 kg Kwsdpjuxg Rlofx Aaljw

Condition: used, energy chain, cable drag chain, energy guiding chain, cable chain, drag chain Kwedpfxeuxg Rro Aalsw -Manufacturer: IGUS, energy chain cable drag chain -Length: 5530 mm -Width: 240 mm -Accessories: incl. U-clamps type CFX 12.1 / CFX 12.2 see photos -Transport dimensions: 1060/840/H245 mm -Weight: 26 kg

Condition: excellent (used), functionality: fully functional, For sale: Konig Mini Rex G2000 roll production line, equipped with proofing station and a set of dies for producing various types of rolls. The machine was used mainly for laboratory testing of semi-finished products and roll additives, so it was unused most of the time. As a result, it is in very good visual and technical condition. Interested parties are requested to contact me by phone at 604 517 422. Kedpfx Aasyuv D Tsljww

Condition: new, Year of construction: 2022, Wyciskarka do pomarańczy Zumex Versatile Pro Produkt: świeżo wyciskany sok Owoce na minutę: 22 owoce/min Kwsdpfx Ajwk D Nqealjw Pojemność koszyka: 10 kg Wielkość owocu: 65-81 mm Pobór prądu: 2,7 A Moc: 380W | 0,4 KM Napięcie: 230-240 V / 50-60 Hz Bezpieczeństwo: trzystopniowa kontrola bezpieczeństwa magnetycznego Wymiary szer. x gł. x wys.: 47,5 x 58 x 165 cm Waga - 87 kg Profesjonalna wyciskarka do soków z zasobnikiem na 10 kg pomarańczy. Przeznaczony do samodzielnego i wydajnego przygotowywania soków wysokiej jakości. Zaoferuj najlepszy sok dzięki temu inteligentnemu urządzeniu o wyrafinowanej konstrukcji, które triumfuje w kawiarniach, sklepach samoobsługowych i hotelach, gdzie jest duże zapotrzebowanie na soki, a to wszystko na powierzchni zaledwie 0,26 m2!!! Wydajność wyciskarki wynosi 1,5 litra świeżego soku na minutę. Sterowanie – dotykowe przyciski start/stop. Skórka cytrusowa jest automatycznie wyładowywana do dwóch wyjmowanych pojemników znajdujących się na spodzie urządzenia. Można jej używać nie tylko do wyciskania soku z pomarańczy, ale także innych owoców cytrusowych. Bezpieczeństwo: automatyczna blokada ostrza i silnika. Silnik zatrzymuje się po otwarciu pokrywy. Zabezpieczenie silnika przed przegrzaniem i zablokowaniem mechanizmu zgniatającego. Wbudowany system antybakteryjny AS Zapraszamy do kontaktu

Condition: excellent (used), Pellet line The line consists of: - CPM 7932-5 355kW granulator - Palletizer with automatic TMG wrapper - Essegi automatic packaging machine - Tanks and transport system consisting of many redlers and screw feeders - 355kW GT Zesor AG Beater Mill - Control cabinets - High-capacity sawdust sifters Kedewcdndspfx Aalsww - Pellet sifter - Redlers and screw feeders Line with full documentation Line serviced until the end of operation with many spare parts

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Screws ø 90-36D, 45-30D, 45-36D Ksdpfx Aeyilykjaleww Compact design, one shared control cabinet, approx. 800 kg/h

Condition: excellent (used), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum batten length: 85 mm - Minimum batten width: 180 mm - Maximum batten width: 845 mm - Minimum batten height: 10 mm - Maximum batten height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical top spindle 2.2 kW 2) Horizontal bottom spindle 2.2 kW - Right side: 1) Vertical bottom spindle 2.2 kW 2) Vertical top spindle 2.2 kW Kwodpfoyi Tqgox Aalow 3) Horizontal bottom spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5x100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum batten width: 130 mm - Maximum batten height: 100 mm - Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Shaper cutters mounted on right and left spindles, max diameter 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication by oil pump - Spindle diameter: 4x125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Manufactured in Poland - 5 spindles - Unpainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)