Welding Unit

ESAB Rogue ET 180i

Condition: used, hammer drill, chisel hammer, combi hammer, Bosch hammer, cordless hammer drill -Manufacturer: Bauhaus Toolson, cordless drill type PRO-AS 18 Li-1 -incl.: charger and battery -Number: 4x drill drivers available -Price: per piece Kfsdpfx Aaeuwgg Do Eja -Transport dimensions: 240/180/H240 mm -Total weight: 1.9 kg/piece

Condition: new, welding current max. 200 A open-circuit voltage 14 - 24 V Kfodpfeg U Tccsx Aa Eea connected load frequency 230 V weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles

Year of construction: 2022, condition: new, Thickness planer KD410 Weight 205 kg Voltage: 400 V - 3 phases, power (S6) 4,4 kW / 6,6 PS chip and dust extraction diameter 100 mm Planing table dimensions 600 x 410 mm Maximum planing height 230 mm Shaft diameter 70 mm Kfedpfx Ajgx T Hhja Eea Number of knives: 3 Maximum thickness per pass: 4 mm Speed: 5500 rpm Speed 6 m / min. Accessories: - Handwheel with indicator for thickness planer - Planer cutterhead Tersa Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Fully equipped lathe with a lead screw and a feed shaft. Machine features Precise design 2 axes digital readout Large spindle bore – Ø 36 mm Heavily ribbed prism bed made of gray iron Inductively hardened and precisely ground bed guides Ensured accuracy of spindle tip better than 0.009 mm Accuracy of lathe chuck speed better than 0.04 mm Left/right switch on the control panel With a lead screw for threading or automatic longitudinal feed Lead screw and feed shafts in two sintered bearings Automatic longitudinal and transverse feeds Lead screw and feed shaft guard Knobs by the slides with adjustable 0.04/0.02 precise scaling Included by default set of change gears for threading Emergency stop button Smooth and efficient drive of excellent spindle speed adjustment VARIO model equipped with an inverter for smooth spindle speed adjustment! Digital speed indicator By default comes with a solid steel base Technical data Swing over bed 310 mm Swing over cross slide 190 mm Centre width 900 mm Bed width 180 mm Spindle bore 38 mm Spindle tip MK5 Spindle speed 80 – 2000 rpm (adjustment in 2 ranges) Metric thread (18) 0.2 – 3.5 mm/turn Inch thread (21) 56 – 8 TPI Longitudinal feed 0.085 – 0.832 mm/turn Transverse feed 0.01 – 0.1 mm/turn Maximum upper slide travel 65 mm Maximum transverse support travel 210 mm Maximum longitudinal support travel Kedpforic Idox Aa Eofa 650 mm Tailstock spindle travel 100 mm Tailstock quill diameter 38 mm Tailstock quill taper MK3 Motor power 1.5 kW / 230V Dimensions 1520×675×1320 mm Weight 295 kg

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, 10-ton container turning device, self-centering roller stand 380 V, continuously adjustable speed from 200 to 1200 mm/min. For diameters from 300 mm to 3500 mm Roller diameter 270 mm x 120 mm Temperature resistance of the support rollers: 100°C Dual drive With hand and foot remote control, complete set Digital speed display Kodpfx Aaeg Sz Urj Ejfa

Condition: good (used), Tailstock Kfodpfx Aedlp Txja Eoa Quill size: MK 2 Quill stroke: 30 mm height-adjustable Tip height of 250-285 mm of - 5 degrees to plus 15 degrees of tilt Floor area 230 x 155 mm Weight 27 kg

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Kjdpfx Aajd N E Rvs Eofa Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: new, Virutex hand planer. Especially for left and right hand use Long version for 100 % straight work. 990 W, 12,500 rpm. Kjdpfeum Skxex Aa Esfa Incl. side guide 2 pieces in original packaging

Condition: used, Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW Ksdpfxoqvp Nko Aa Eefa -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Year of construction: 2005, condition: excellent (used), driven tool with collet chuck make Benz1114 DA 003 00 E64,1 kg Kodpfjd Th Euex Aa Eefa