Used Ending Range for sale (20,018)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,600 h, functionality: fully functional, machine/vehicle number: P4M_812_3228, working range: 2 mm, overall weight: 13,000 kg, total height: 2,320 mm, type of input current: three-phase, total length: 4,000 mm, total width: 2,210 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 23 A, table length: 2,180 mm, Panel Bender SALVAGNINI P2 LEAN -2120, manufactured at the end of 2021. Fsdpfj Aigm Djx Agxsgi Software: MAC 2.0 First start-up: January 2022 Low number of operating hours. Fully functional, with all documentation (layout, certification, quotation, etc.) available. Prepared for shipment by SALVAGNINI, with a report provided.

Condition: good (used), Year of construction: 2012, I sell the automatic optimising end cutting saw Salvador Superpush 200, year 2012. Fodsyi Suwepfx Agxjgi Input table automatic feeding 5,10m (pusher system) Outut table 3,00m Total length: 9,00m Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: used, Year of construction: 2010, Brooks Automation Wafer Front-End Module, 300mm, ASYST Spartan EFEM, Sorter Model: ASYST Spartan EFEM Fgjdex I Ax Sspfx Agxsi Type: Sorter Condition: Used Technical Data: 100-240V AC 50/60Hz 10A General: 300-mm EFEM with 3 load ports, cleanroom mini-environment, and integrated wafer transfer robot This unit is an Equipment Front End Module (EFEM) from the ASYST Spartan series, designed for fully automated handling of 300 mm silicon wafers in semiconductor manufacturing. It features three load ports, a mini-environment with ULPA air filters, internal lighting, comprehensive safety controls, and all necessary interfaces for seamless integration into production lines. In addition, it comes with a fully integrated wafer transfer robot that extracts wafers from FOUP/carrier load ports, separates them, and precisely delivers them to downstream process modules. Year of manufacture: 27.12.2010 Including CD with operating, service, and installation manuals (9701-3060-01 Rev G)

Condition: excellent (used), Year of construction: 2011, control type: NC control, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, side roll diameter: 130 mm, sheet thickness (max.): 4 mm, overall weight: 1,470 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 1,200 mm, Equipment: documentation/manual, emergency stop, foot remote control, 3 roll plate bender Stuckmann & Hillen - 311.04 Rolling width: 1270mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:5mm Rolling thickness prebending: 3mm Top Roll Ø: 130mm Bottom Roll Ø: 130mm Fgsdo Aidw Ejpfx Agxsi Side roll Ø: 130mm Number of rolls: 3 Rolling speed: 10,5 Adjustiment lower roll: 60mm/min. Adjustment side rolls: 20mm/min. Power: 3kW Length: 1500mm Width: 1000mm Height: 1200mm Weight: 1470kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1998, Double end tenoner Homag 4+4 motors Opening side 2500 mm Fgjdpfx Ajrcbccegxji Feeding speed 4-24 m/min. Perfect for panels, windows, furniture

Condition: like new (used), Year of construction: 2021, I sell the pneumatic end cutting saw Stromab TR350, year 2021. Motor power 4,0kW Saw blade diameter fi.350x30mm Cutting schema ver.1 max. 210x30mm Cutting schema ver.2 max. 150x80mm Input table 1,00m (possible to enlarge) Outut table 1,00m (possible to enlarge) Fence for stoppers 2,00m total length Available immediately. Fgedpferzu Ugex Agxei Condition like new. Weight 150kg.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Pipe length: 4 meters Year of manufacture: 2011 6 tool sets Round 22, radius 44 Round 42, radius 84 Round 28, radius 56 Fjdps Agu D Ejfx Agxjgi Round 18, radius 36 Round 35, radius 70 Round 54, radius 108

Condition: excellent (used), working width: 2,500 mm, Gabbiani double-head panel squaring machine Fgsdjzfvufepfx Agxji 3 + 3 working units Maximum working width 2500 mm Overhauled and in working order

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Fsdpfx Agstyqhqexsgi

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Fgsdszd R Tgspfx Agxsi Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R 452A and R 23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by phone.

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Fgjdozd Sdmjpfx Agxoi Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WT1-340/30   Converted to R452a   Weiss temperature chamber, air-cooled   Temperature range: from -30°C to 180°C   Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min   Test chamber dimensions: Width 550 mm x Depth 750 mm x Height 800 mm Housing dimensions: Width 800 mm x Depth 1500 mm x Height 1800 mm   Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, Rated current: 9 A   Refrigerant: R452a   Weight: 515 kg   For your safety as a buyer, please note the following information:   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Fgedpezd Rw Sjfx Agxei Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VT 7012 S3 Vötsch Shock Test Chamber Water-cooled Temperature range: -80°C to +220°C Warm chamber: +50 to +220°C Medium chamber: -10 to +90°C Cold chamber: -80 to +70°C Supply voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Rated power: 13.5 kW Refrigerant VK: R 404A 3.00 kg p*: 25 bar Refrigerant TK: R23 15 bar p*: 25 bar For your safety as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Fsdpfx Agszd Uzuoxegi Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Fgjdpfsz Smvgsx Agxei

Condition: used, Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 7.5 K/min Fgjdpfxjzdtdhs Agxei Temperature change rate (heating): 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10.5 kW, Rated current: 22 A Fuse (customer-side): 32 A, time-delay Sound level at 1m distance (free-field measurement): < 69dB (A) Side access: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R 404A and R 23 Weight: approx. 460 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A Fedpfoz Sn Uvjx Agxogi For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), total width: 2,300 mm, total length: 7,800 mm, total height: 2,250 mm, overall weight: 15,000 kg, Manufacturer: AXA Type: HFB 600 Control: Siemens 840D Solutione Line Year of manufacture: 2015 Specifications Metric US Standard There are (currently) no specifications for this machine. Fgodpjt Tdp Tsfx Agxoi Dimensions (Estimated) Length: 7800 mm Width: 2300 mm Height: 2250 mm Weight: 15000 kg Please note: The information on this page has been provided by us to the best of our knowledge and belief, and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual obligation. We recommend that you verify all important details. Finishing of sealing surfaces: The finishing of the sealing surfaces of the approximately 17m long tubes is performed by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors, or measuring probes. The workpiece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the floating chuck once it is at a right angle and centered to the facing slide head. The interchangeable measuring sensors calculate how to process the surface.

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Fjdpfx Aozfprkogxsgi Chipbreaker on the right and left spindles. Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Track shoe width 50 mm for processing narrow parts. Machine in perfect condition, ready for use.

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) for tubes, up to 6 tools (5 follow-up tools) can be interchanged for forming Drive power: 7.5 kW Max. tube diameter: approx. 40 mm Fgedpozzwpvsfx Agxsi Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Fedpoufr H Asfx Agxsgi

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: E212514, total width: 240 mm, total height: 120 mm, spindle speed (min.): 4,000 rpm, spindle speed (max.): 7,000 rpm, overall weight: 300 kg, rotational speed (max.): 7,000 rpm, rotational speed (min.): 4,000 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, Soundproof automatic end milling machine. Adjustable feed rate and rotation speed. -45° to 45° end milling by adjusting the stop. Easy and quick blade changes thanks to pneumatic quick-release coupling. Includes 4 spindles with 12 accompanying blades. Fgedpfxez Ii Uuo Agxji In very good condition.

Condition: excellent (used), I sell the double end cutting and tenoning machine CELASCHI TSA 300. Working width up to 3000mm Feeding speed 3-18 m/min. Configuration left side / fix: 1 pc. cutting saw aggregate 4,0 KW Fgedpfovxu Uhsx Agxei 1 pc. moulding aggregate 5,5 KW Configuration right side / moving: 1 pc. cutting saw aggregate 4,0 KW 1 pc. moulding aggregate 5,5 KW Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 4471A, total width: 3,500 mm, total length: 5,500 mm, total height: 2,400 mm, overall weight: 6,700 kg, input voltage: 400 V, type of input current: AC, space requirement height: 3,000 mm, space requirement length: 1,200 mm, power: 40 kW (54.38 HP), Equipment: documentation/manual, double-sided, Machine for double side tenoning with bridge drilling dowelling not included operations RIGHT WING: 1st - saw up/bottom, 2nd - vertical cutter (frese), 3rd - vertical drill LEFT WING: 1ST - SAW UP / BOTTOM, 2nd - horisontal cutter (frese) 3rd - vertical cutter (frese) AFTER WINGS : - one verticla drill - two horisontal drills BRIDGE: Fgjdpov T U A Uofx Agxsi - one angled drill

Condition: good (used), mileage: 3,373 km, power: 80 kW (108.77 HP), first registration: 09/2024, fuel type: electric, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,970 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,910 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - None - LED lamp - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Curb weight: 2790 kg, Gross vehicle weight: 3500 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 6, Auxiliary heater, Parking assist: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 80 kW (107 hp), Fuel: Electric, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Side wall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L3H2 Maxi, Spare wheel, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 225/75R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,790 kg Payload: 710 kg GVW: 3,500 kg Functional Fgjdpfj Ahw Dbsx Agxoi Loading area height: 68 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 721 € per month (delivery van, 72 months); Ask for further information and conditions

Condition: used, -Dimensions: 1620x2225x2300 mm -Serial no.: 12026399 -Model: Omega 4 -Slab size: 801x1840 mm -Year: 2007 -Baking surface: 5.9 m² -Max. temperature: 300 °C -Integrated loader/lifter -Voltage: 400V -Power: 27 kW -Weight: 1590 kg -Overhauled equipment: equipment is prepared upon order; collection and return deadlines are agreed at this time (please request price after overhaul) -Front panel with brushed stainless steel hood -Heavy-duty refractory cement baking decks, 20 mm thick -Stainless steel sheathed electric heating elements -1 independent relief damper per deck Fedpfxjy H D A As Agxegi -1 independent steam generator per deck -Thermal treated glass to reduce heat loss -Steam unit and column always on the same side -Equipped with steam extractor for the hood -Insulation by cross-laid rock wool panels -High-temperature silicone cable wiring harnesses