Used Emcoturn 140 for sale (8,085)

Condition: excellent (used), TIRA Type: TCZ 4022 S -2K Description: Air-cooled climate simulation cell System structure: The system consists of the following main components: Walk-in, insulated cell Air treatment room Humidification system Machine room Switch cabinet Technical data: Performance range for temperature testing: Temperature range -40...+140°C Temperature constancy, in the supply air: (time-wise) ≤ ± 0.5°C without them. Test room load according to (DIN 50011 Τ13) EN 60068 Temperature constancy, in the supply air: (spatial) ≤ ± 1.0°C without thermal test room load according to (DIN 50011) EN 60068 Heating rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Cooling rate (according to DIN 50011) approx. 2.0 K/min without thermal test room load (according to DIN 50011) EN 60068) or test material in the temperature range of -30°C...+85°C Performance range for climate test: Temperature range +10...+90°C Humidity working range 10...approx. 95% r.H without thermal test room touch Dew point temperature range +5...+89°C without thermal test room touch Humidity constancy (in the supply air) (time-wise) ≤ ± 2.5% r.H measured in the supply air Performance range for climate testing with heat compensation Temperature range + 15...+ 80°C Humidity 15...approx. 80% r.H without thermal test room load with max. 16 kW heat compensation Dew point temperature range +10...+74°C without thermal test room touch Dimensions: test room (WxDxH) approx. 2260 x 4648 x 2260 mm Dimensions: external dimensions (WxDxH) approx. 2660 x 6460 x 2800 mm clear doorway test room door (W x H) 2260 x 2260 mm climate module KB 127 (W x D x H) 1700 x 800 x 1400 mm switch cabinet (W x D x H) 800 x 500 x 2000 mm design: air flow: supply air: perforated sheet on the rear wall, in the ceiling area exhaust air: perforated sheet on the rear wall, in the floor area temperature control: direct cooling by evaporation of refrigerant in a finned heat exchanger: heating with electric resistance heater dehumidification: direct dehumidification by evaporation of refrigerant in a heat exchanger interior paneling: stainless steel outer paneling: sheet steel, galvanized, plastic-coated floor design: stainless steel, floor load 15000 N/m² wheel load (contact surface ≥4cm²) 1500 N/wheelDoor: double-leaf door, stainless steel, painted on the outside with viewing window (WxH) l000xl000 mm Test room lighting: 4 spotlights of 500 W each Insulation Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool Refrigerator (1 piece) Bltzer 6G-30.2Y Refrigerant, R449A! Refrigeration machine oil SEZ 32 Steam humidifier (1 piece) EDB 40Color: Gsdpfovx S Hhex Admott Cell RAL9010, white Door RAL9010, white Machine unit RAL 7032, pebble gray Control cabinet RAL 7032, pebble gray Mass: Total system approx. 4900 kg Machine set KB 127 approx. 750 kg Control cabinet approx. 120 kg Humidification system approx. 64 kgConnections: Nominal voltage 400 V +6%/-10% 3/PA 50Hz Nominal power 95 kW Nominal current 150 A

Condition: good (used), Groen DH/1-40 Boiling pan kettle Serial: 77863 Stainless tipping kettle, jacketed, Natural gas, Heat input 24.5Kw, with lid, 1Ph Gtedpfx Adst T Ef Aomjt

Condition: used, mobile extraction unit with filter bag on top extraction nozzle 140 mm motor 400 V 1.1 kW Availability: short-term Gedpfx Asxnfflsdmott Stock location: Flörsheim

Condition: excellent (used), Vecoplan 350/140 Chipper / Shredder Catalogue No. 7742 TECHNICAL DATA - Infeed width: 350 mm - Infeed height: 140 mm - Shaft width: 345 mm - Shaft diameter: 290 mm - Number of knives: 2 pcs - Screen size: 55x55 mm - Toothed feed shaft from above and below - Shaft motors: 2×1.5 kW - Electric auto-reverse (adjustable) - With vibrating chute - Vibrating chute length/width: 3750×355 mm - Full vibrating chute dimensions: 3750x620x1210 mm - Discharge with conveyor belt: 2970x340 mm Gtjdpfx Adexcx S Iemot - Conveyor belt dimensions: 3000x630x750 mm - Main motor: 22 kW - Dimensions (L/W/H): 3000x1100x1500 mm - Weight: approx. 2500 kg ADVANTAGES – German-made – with vibrating chute – With discharge conveyor – Auto-reverse – Used chipper, in very good condition Net price: 47,900 PLN Net price: 11,400 EUR depending on the exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Technical details: tank capacity: 17 l motor: 1380 Flow rate: 2,54 l / min pressure capacity: : 340 und Pw: 310 bar total power requirement: ca. 1,5 kW weight: ca. 21 kg Gsdsu N E H Hepfx Admstt dimensions L x W x H: 0,5 x 0,2 x 0,6 m 4x directional valve 1x pressure relief valve 2x pressure switch 1x pressure gauge 2x bubble accumulator *

Condition: used, Year of construction: 2025, width of the strips 150 mm band length 2000 mm band speed 1400 / 2800 U/min Gtsdpfew U U U Dex Admot tube diameter 40 - 140 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 360 kg. Exhibition machine - like NEW not yet in use (!!) New price approx. 6.500 euros Special price on request - Machine video - identical machine - ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal & vertical grinding alignment possible - 1x set of grinding rollers included in delivery (Ø 76-90-114 mm) * other dimensions optionally available for an additional charge

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Parts shown by hand not come. Gtedpfeu Ibihex Admst

Year of construction: 1978, condition: used, Article: Programme-controlled automatic lathe Manufacturer: Traub Type: TF60 / 140 Yob: 1978 Bar automat Gjdpfx Asl Rmqtodmjtt Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 1991, Volume flow: 1550 m³/h Pressure difference: 1000 Pa Drive motor: 400 V, 2850 rpm, 1.5 kW Intake nozzle diameter: 150 mm Space required: 1100 x 500 x 2450 mm Weight: 133 kg Gedpsvitd Ajfx Admjtt

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing Gjdpoqy E Evsfx Admjtt - Degassing zone - K-SWE 180 double piston screen changer / filter - strand nozzle - Control system Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces -Prism width: 100 mm Gtjdpfx Aeu T Tp Uedmet -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm -Total weight: 75.1 kg

Condition: used, TECHNICAL DETAILS - Temperatures : -40 / +180 [°] - Power : 12 [kW] Gedsug U Tnspfx Admstt - Inside dimensions : 500 x 500 x 500 [mm]

Condition: used, Year of construction: 1990, Progressive Header SACMA SP.140 Fully operational Available for any test PROGRESSIVE HEADER SACMA SP.140 Technical information: Number of dies: 3 Heading tonnage: 420 kN Maximum cutoff diameter at 500N/mm²: 8 mm Maximum cutoff length: 65 mm Max. kickout stroke die: 45 mm Max. kickout stroke punch: 14 mm Production speed (pieces per minute): 350 Main motor power: 19 kW Die diameter: 45 mm Die length: 75 mm Punch diameter: 38 mm Gtsdpfsw Eluwox Admjt Net weight: 8,500 kg Gross weight: 10,000 kg Condition: Very good, fully operational Year: 1990 Ready for immediate delivery Machine runs without any issues. Available at HBR srl – Calolziocorte (LC) Italy

Condition: excellent (used), Weinig 140/4A Four-Side Planer Working width: 140 mm Working height: Number of spindles: 6 Spindle arrangement: Bottom 3 kW Right 2.2 kW Top 3 kW Bottom 3 kW Right 4 kW Left 3 kW Feed speed adjustable: First gear 4.3/5.3/14.5/18 m/min Gedpfxsw Tiyxj Admott Second gear 8.6/10.6/29.0/36.0 m/min Total power: 21 kW

Year of construction: 2004, condition: as good as new (ex-display), Submersive pump Vogel Spandau Pumpen model 3Mot.DB63.2370+140 230/400V 0,37 kW Godpekvnqqjfx Admott

Condition: used, Gears, spur gears, bevel gears, worm gears -Gear: bevel gear type E 080 B -Translation: i 24 : 1 -Shaft: Ø 12 x 25 mm -Hollow shaft: Ø 12 x 65 m -Dimensions: 140/60/H90 mm -Weight: 1.5 kg Gtjdeit Rmijpfx Admst

Condition: used, Gearbox, spur gear, angle gear, worm gear -Manufacturer:Varvel, worm gear -Translation: i= 28 -Hollow shafts: Ø 24 x 100 mm / Ø 34 x 100 mm Gtedpfx Adet Rbixemot -Dimensions: 150/140/H170mm -Weight: 4 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 4 pieces Gjdpfx Adou Uwv Iomott -Type: Ø 100/110/140/160 mm various versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 31.7 kg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm Gtedpfxsf Sa N Us Admst -Weight: 18 kg

Condition: used, Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 30 mm -Bores: Ø 18/20 mm, see photos -Number: 2x angles available -Price: per piece Godpfx Ajgpmbbjdmstt -Dimensions: 165/140/H245 mm -Weight: 13.1 kg

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm Godpfxoxvcrxo Admstt control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Runned hours: 8173 Under power in our warehouse!

Year of construction: 2021, condition: excellent (used), power: 10 kW (13.60 HP), input voltage: 415 V, belt width: 407 mm, product height (max.): 85 mm, Lomax TD 407 Double Drum Spiral Freezer – To Be Converted into 2 x Compact Single-Drum Spiral Freezers We are offering a Lomax TD 407 spiral freezer, originally supplied as a double-drum configuration, which will be professionally split into two independent single-drum compact spiral freezers. Each machine will be supplied as a stand-alone compact spiral freezer, ideal for food producers looking for efficient freezing capacity with a smaller footprint. Conversion scope includes: Separation of the existing double-drum system into 2 individual single-drum spirals Independent drum, belt and tensioning system per machine Separate infeed and outfeed per unit Machines configured to operate independently Suitable for installation in existing production environments This conversion provides a cost-effective solution for customers requiring compact spiral freezing without investing in a brand-new system. 📍 Machine currently located in the UK 📦 Available as two separate machines following conversion 📩 Further technical details, layouts and pricing available on request Year of manufacture 2024 304 Stainless steal mesh belt Product gap 85m Tier pitch 140mm 1.62m Drum 24 Tiers on up drum 24 Tiers on down drum Gsdstzmk Nopfx Admott Belt Width 407mm Effective Belt Width 337mm

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Gedox R Al Dopfx Admjtt Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 140/500 The unit is in full working condition and is ready for immediate use Gtjdoxhdw Topfx Admjt AxiChrom is a family of large-scale, low-pressure chromatography columns made by GE Healthcare The “140/500” refers to a column with inner diameter (ID) 140 mm and bed height up to 500 mm (the “long-tube” version Typical Uses Process development, scale‑up trials, and small/full scale production of biomolecules (e.g. proteins, antibodies) in biopharma or biotech. As part of purification workflows where large volumes and high throughput are needed, but still under low pressure (i.e. not high‑pressure liquid chromatography)

Condition: used, Year of construction: 2005, operating hours: 3,600 h, 2005 | JCB 535-140 with forks and loading bucket | Used Telescopic Forklift | 3600 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Gtodpfxjx Ti Udj Admet 59 inspection points 59 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The unit functioned during inspection recommended full service and filters 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40116 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.