Used Emco Mill 155 for sale (148)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Knjdjw Dfhuopfx Aa Eof

Condition: used, Year of construction: 1995, functionality: fully functional, turning diameter: 25 mm, spindle speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, bar passage: 25 mm, bar diameter (max.): 25 mm, Emco ET425 Kedpfx Aew Adxpoa Esnf 2 main spindles, 2 pick-off spindles 2 turrets, 12 tools per turret or 4 driven tools with double bar feeder magazine

Condition: repair required (used), Year of construction: 2008, operating hours: 9,000 h, functionality: not functional, machine/vehicle number: R65EW1851, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 4,200 rpm, No reserve price - guaranteed sale at the highest bid! Nimble and precise machine with lots of accessories, driven tools and collet chuck with various collets, including square and hexagon. Knjdpfxevrz A Se Aa Eef Condition: Used machine, previously used in Thailand. Due to the climatic conditions on site, the machine shows external signs of use. The pneumatics show signs of wear, especially from the distributor: brittle hoses, some broken. It is not possible to assign the hoses from the distributor valve without a diagram. The pneumatics must be repaired. TECHNICAL DETAILS Swing diameter over bed: Ø 600 mm Swing diameter over cross slide: Ø 360 mm Distance main spindle (clamping flange) - tailstock center: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel ranges Travel path X: 210 mm Travel path Z: 610 mm Main spindle Spindle connection according to DIN 55026: KK 6 Outer spindle diameter in the front bearing: Ø 100 mm Spindle bore: Ø 73 mm Hollow clamping cylinder with draw tube, max. passage: Ø 66.5 mm Max. chuck size: Ø 250 mm AC motor, power (100%, 60% ED): 15 / 18 kW Speed range (infinitely adjustable): 60 - 4,200 rpm Max. torque: 192 Nm Tailstock Automatic tailstock: hydraulically operated Tailstock travel: 500 mm Max. tailstock pressure force: 8,000 N Travel speed: 20 m/min Inner taper of the tailstock quill: MK 4 Feed drives Rapid traverse speed X/Z: 24 / 24 m/min Feed force X: 5,000 N Feed force Z: 7,000 N Acceleration time from 0 to rapid traverse: 0.2 s Position spread (according to VDI 3441 in X/Z): 3 / 5 µm C-axis (spindle 1 and 2) Resolution of the rotary axis: 0.001° Rapid traverse: 1,000 rpm Spindle indexing (disc brake): 0.01°

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Knedpfek Nk I Nex Aa Ejf

Condition: excellent (used), Year of construction: 2018, HT 45 SM2Y / SIEMENS - with driven tools + Y-axis CNC turning machine for complete machining of turned/milled components with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on the main and sub-spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Sub-spindle - 15 kW Speed range: Kjdjwvlvvjpfx Aa Eonf Main spindle 0 - 7,000 rpm Sub-spindle 0 - 7,000 rpm Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity Ø 45mm) Sub-spindle: KK5 Y-axis: • Travel range: +40/-30mm • Rapid traverse: 15m/min Includes: • Hollow clamping cylinder on the main spindle • Draw tube for main and sub-spindle • Mechanical spindle brake (main/sub-spindle) • Part ejector and flushing through the sub-spindle • Sinumerik 840D-sl / OPERATE control o SHOPTURN dialog programming o USB interface o Network drive / Ethernet o 15" TFT color monitor o 3D simulation o and much more • 2x 12-station tool turrets VDI 25 radial version with directional logic for up to 2x 12 driven tool stations! Swivel speed adjustable via feed switch! Performance data: o Max. 4kW at 2080 rpm o Constant torque 16 Nm o Speed range 0-6000 rpm o C-axis for main and sub-spindle o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1100mm (Type "hinged belt") • Coolant system integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar each 2 pcs. flushing pumps, 3.7 bar each • Hydraulic unit • Machine light • Documentation Includes: DE6400 1 pc Control language German S3Z580 1 pc 22-inch multitouch operating unit HT45 X3Z160 1 pc Tool monitoring Siem. 840Dsl X3Z690 1 pc SHOPTURN/MILL expansion kit 840DSL/828D X3Z710 1 pc 4-axis turning/balance 840DSL/828 S3Z20S 1 pc Glass scale X1 SIEMENS S3Z21S 1 pc Glass scale Y1 SIEMENS S3Z23S 1 pc Glass scale X2 SIEMENS X1Z140 1 pc Loader interface A8, S2, S3, S4, S6, R2, R6, R9PM S30593 1 pc Surcharge for flat chip conveyor S3Z610 1 pc Tool measurement HT45 S4Z140 1 pc Coolant gun S3Z160 1 pc Cooling unit HT45 S3Z010 1 pc Oil mist separator MT45/HT45/E45 S3Y300 1 pc Band filter 600l+conveyor HT45 S30605 1 pc Preparation HT45 sub-spindle unloading S30595 1 pc Robot interface HT45 S30596 1 pc Interface to measuring station S30597 1 pc Interface for unloading unit S30598 1 pc Wireless measuring probe Renishaw S30599 1 pc Tool layout by Emco 990717 1 pc Loading system IRCO ILS-RBL-8008 990718 1 pc Unloading system IRCO ILS-REX-8008 ..... Year: 2018 Machine No. S3A182001

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Knsdpjv Iqm Sjfx Aa Esf Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Kedpfjg Rcf Iox Aa Ejnf

Year of construction: 2005, condition: excellent (used), Control: Siemens 840 D Travel distances: X-260 mm; Z-610 mm Speeds: Main spindle 0-5000 RPM; Sub-spindle 0-7000 RPM C-axis Knedpeppyryefx Aa Esf Y-axis 80 mm 12-station turret, all driven Tool holder VDI 30 Speed of driven tools 0-5000 RPM Bar passage 65 mm Accessories: Hainbuch collet chuck on main and sub-spindle Part catcher Chip conveyor Emco loading magazine LM 1200 Various tool holders

Condition: good (used), Year of construction: 2000, turning diameter 340 mm Knodpfjvwgpbex Aa Eof turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Kedpfx Aek Nk Iwja Esnf

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic Knedpfewkpzlsx Aa Eof • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Kedpfxev Iqlzs Aa Eonf Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Knodpfsg Rcf Sjx Aa Ejf

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Machine available IMMEDIATELY with a wide range of accessories ex works Mayrhofen for a bid Knjdpfxsnk Uabj Aa Ejf

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, TECHNICAL DETAILS Swing over bed: 700 mm Max. turning diameter: 520 mm Spindle pitch: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Clearance through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Drawbar clearance: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MT 5 Feed rates Kjdpfxov Hqnte Aa Ejnf Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the X-axis ball screw (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Bearings replaced on both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in-hole + 2 on the surface - Clamping jaws: 2 hard base jaws - Complete machine documentation - Replacement turret (after complete overhaul)

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: A8A R19 52, turning length: 225 mm, turning diameter over cross slide: 250 mm, turning diameter: 80 mm, spindle motor power: 4,400 W, spindle speed (min.): 300 rpm, spindle speed (max.): 6,300 rpm, spindle bore: 25 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, bar diameter (max.): 25 mm, quill stroke: 50 mm, Equipment: documentation/manual, Additional info : 12-station tool turret for VDI16 quick change tools bi-directional logic for driven tools Knsdpfx Aajxvb Tho Eef

Condition: new, Year of construction: 2024, EMCO Concept MILL 105 PC - controlled CNC - table - machining center machining center Machine complete with full enclosure, safety devices according to Kjdpfx Aajtz S Rhe Esnf CE, 10-fold tool drum, central lubrication, machine light, electrical and mechanical preparation for automation, Tool set for operation. Year 2024

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Knodpfov Ip Izsx Aa Eef Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories Knsdpfx Aaewpkd So Eef collet equipment is included

Condition: new, Year of construction: 2024, EMCO Concept TURN 105 PC-controlled CNC bench lathe Machine complete with full enclosure, safety devices according to CE, 8-fold tool turner, manual tailstock manual tailstock, central lubrication, Kjdpfx Aotz S I Hoa Eenf machine light, electrical and mechanical mechanical preparation for automation automation, tool set for operation. operation. Year 2024

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 Ksdpfx Aaev Imzfo Eenf MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck

Condition: new, Year of construction: 2023, functionality: fully functional, turning length: 680 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, bar diameter (max.): 65 mm, TECHNICAL DETAILS Swing diameter over bed: Ø 540 mm Swing diameter over cross slide: Ø 360 mm Center distance (spindle nose-centre): 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Control: FANUC series 0i TF with Manual Guide dialog programming Travel range Travel path in X: 210 mm Travel path in Z: 610 mm Main spindle Speed range: 60 - 4,200 rpm Drive power: 18 kW Spindle connection DIN 55026: KK6 Tool changer Number of tool positions: 12 Receiving compartment according to (DIN 69880): VDI 30 axial Automatic Tailstock Description: hydraulically operated, robust construction without quill, Max. contact pressure: 8,000 N Holder cone: MK4 Knjdpfxevwm Ahj Aa Esf MACHINE DETAILS Machine footprint (W x D): 2,855 x 1,770 mm Total weight: 4,300 kg EQUIPMENT - Hollow clamping cylinder including draw tube - USB interface - Network drive / Ethernet - PCMCIA slot - TFT color monitor 10.4" - 3D simulation - Machine light - Coolant system - Hydraulic unit - Interface for chip conveyor - Vibration-absorbing leveling shoes - Screw-on bracket and high-performance anchor - Documentation / CE certificate - Warning light LED 3-way on the side - Manual tool measuring system (S65) - Foot switch - BEF.-MAT. ET420/345/332 E45/65 MT45/65

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup - footpedal - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Runned hours: 8173 Knsdpfx Aajxvcrxj Esf Under power in our warehouse!