Center lathe

Emco EMCOMAT-17 D

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Very nice machine, originally used for vocational training, with a digital display and good accessories. Available in our warehouse from the middle of week 37. Estimated price: €18,500 net. Crsdpfx Acozxycme Tsg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table Csdpeu Tuk Hsfx Ac Terg - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: new, Machine according to DIN 8605: Lathe with increased accuracy. Distance between centers: 700 mm Distance between centers: 170 mm Swinging diameter over bed: Ø 340 mm Swinging diameter over carriage: Ø 190 mm Bed width: 260 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Carriage length: 410 mm Carriage width: 150 mm Guide length of bed carriage: 380 mm Lathe tool shank cross-section: 20x20 mm Distance from lathe center to top slide: 34 mm Swiveling range of top slide (rest): 60/120° Main spindle: Spindle mount DIN 55029 (camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in the front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 RPM Speed control: Stepless Mechanical speed steps: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4 - 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Arbor diameter: Ø 50 mm Internal taper of arbor: MK 3 Arbor travel: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Suspended: 50 kg Supported by tailstock: 150 kg Further standard equipment (standard accessories): Includes machine stand and integrated 3-axis digital display, German language, with color display 1 length stop 1 center, taper 1:22, DIN 7178 1 center MK3 1 chuck key 1 key part 1 grease gun 3 hexagon head screws M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 simple tool holder 1 key A13x17 DIN 837 1 open-end wrench SW 19 1 open-end wrench SW 22 1 hexagon screwdriver SW 5 1 hexagon screwdriver SW 6 1 hexagon screwdriver SW 8 Crsdpfodctnbox Ac Tog 3 shear pins 1 box wrench 1 operating manual incl. parts list 1 electrical documentation 1 test report Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Illustrations show special equipment / accessories, among other things!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, spindle bore: 50 mm, EMCO lathe EMCOMAT 17D ex education in very clean condition. Specifications: - year of construction 2006 - turning diameter over the bed 340mm - turning diameter over the cross slide 190mm - distance between centers 700mm - speed 40-3000rpm variable in 4 steps - diameter of main spindle 50mm Accessories: - 3-jaw chuck with inner and outer jaws Crodpfxeu N Dpms Ac Tsg - 3-axis digital readout - electric diagram - multifix chisel holder with 3 holders - cooling system - machine illumination - rotating center - bedstop - machine feet

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. Cedpox D I H Defx Ac Torg • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: used, Year of construction: 2022, functionality: fully functional, DOOSAN PUMA GT 3100 M – UNUSED, PRE-OWNED MACHINE WITH ROBOT CELL A Doosan Puma GT 3100 M, manufactured in 04/2022, which has never been used in production after commissioning by the supplier (February 13, 2023). 0 production hours, no workpiece contact, technically and visually in new condition. Includes a factory-installed robot cell for automated loading. Origin: Liquidation of a user's operations in the Nuremberg area. On-site or video call inspection possible. KEY FEATURES - 12″ main spindle, high power and high torque for steel and stainless steel machining - Driven tools VDI40/BMT 65P, milling, drilling and threading from the turret, complete machining in a single setup - Programmable tailstock with servo drive (Z2 axis) Crsdpfozi Da Rox Ac Tjg - Siemens Sinumerik 828D with 15″ touchscreen and ShopTurn workshop programming - 30° inclined bed, FEM optimized, cast iron - Halter LoadAssistant Universal Big 70 robot cell, mounted and ready for operation (see photos) FACTORY-INSTALLED SPECIAL EQUIPMENT (installed on the machine) - 24-tool turret BMT 65, Hirth gearing (1 s/position) - Automatic tool measuring arm (tool setter) - Tailstock programmable, hydraulic clamping, mount for rotating center - Auto-power-off after program end - Automatic door with servo drive - Three-jaw power chuck Ø 305 mm (12″) with hydraulic draw-in mechanism - 3x Eppinger driven tool holders (drilling/milling head, VDI40/BMT 65) - LNS hinged belt chip conveyor and LNS Turbo HB coolant filtration system - Dormatec ADF oil mist extraction system (filter level 99.97 %, 65 dB) - 20 kVA transformer separately wired - Absolute encoder on all axes HALTER LOADASSISTANT UNIVERSAL BIG 70 (Automation) A Halter robot cell with a Fanuc six-axis robot M-710iC/70 is mounted on the machine (see photos: robot arm with Halter lettering directly on the machine). Cell equipment: - Fanuc robot M-710iC/70, payload up to 70 kg - Workpiece placement via rotary table/loading tray - Workpiece-specific grippers for loading the main spindle - Safety enclosure The cell is designed for this machine and is ready for operation, eliminating the need for additional investment in automation. CONDITION Used machine, unused, no operating hours since installation at the original buyer. Sold "as is", warranty excluded (used machine). Inspection recommended before placing an order. OUR SERVICE On-site or online inspection in the Nuremberg area, transport, installation and commissioning as a separate package upon request, direct German-speaking contact person for spare parts and support, financing possible via leasing/hire-purchase partners, member of the FDM, the German trade association for wholesale trade in machinery and tools. Since this is a single unit, subject to prior sale. Call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Cedpfxey Uvhye Ac Tsrg Length:1200mm Width:800mm Height:1400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1999, 6 vertical storage tanks with jacket cooling Additional title: vertical, coolable stainless steel tanks Content: 2200 l Max. pressure: 0,99 bar Length: 1000 mm Width: 1000 mm Height: 1965 mm Operation / Control: manual Material: stainless steel 1.4301 Csdsw Tlppspfx Ac Tjrg Position: free-standing Base construction: cylindrical tank with curved bottoms and square tube feet on domes Features: sprayball, bunging apparatus, pressure gauge, 1 shell cooling zone, standhose for content display, manhole, thermometer and sampler in the shell, manual valve for cooling control, central bottom outlet

Condition: good (used), EMCOTurn 120 CNC lathe. Cedsu Rd S Ropfx Ac Tjrg 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Ex-College machine

Year of construction: 1999, condition: used, 4 upright fermentation vats with jacket cooling Additional title: vertical, coolable, stainless steel vessels Max. content: 2500 l Length: 1600 mm Codpfxexwy Sls Ac Terg Width: 1600 mm Height: 1717 mm Operation / Control: manual Material: stainless steel 1.4301 Position: free standing Base construction: cylindrical vessel, open at the top, with square tube feet on domes Features: Shell cooling, automatic-valve with temperature control, central bottom outlet with shut-off valve