E65 TCM, year of manufacture 2006 (direct sale by customer)

EMCO EMCOTURN E65 TCM, Bj. 2006

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Bdsdpfoxrcnlex Ac Tog

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Bsdpfx Acjxapdco Tjdg Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! Bdedpfx Acevvtpxo Tjg *

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m Bsdpfx Asydqpisc Todg taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Bsdpfoyfnqgex Ac Tjdg Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-position turret VDM 40 - C-axis

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER BRAND: HAAS VF-3 SS YEAR OF FIRST INSTALLATION: 2014 TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG TRAVEL: X: 1,016 mm Y: 508 mm Z: 635 mm SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING Bjdpfx Aezminnsc Tsdg ADJUSTABLE COOLANT NOZZLE

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Bodpoygw Svefx Ac Tsdg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret Bsdpfxoyv Epve Ac Todg • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Bsdpfxoyz Dg De Ac Tedg Includes operating instructions

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Turning diameter *over bed 600 mm *over cross slide 500 mm Distance between main spindle and counter spindle 975 mm Maximum turning diameter 430 mm Maximum turning length 744 mm Maximum bar diameter 65 mm Workpiece size with counter spindle max. ø 200 x 200 mm Main spindle Drive power 29 kW Speed range 0 – 5000 rpm Maximum bar passage 65 mm Maximum chuck size 200 mm C-axis *Resolution 0.001° Counter spindle Drive power (100/40% ED) 17/22 kW Speed range 0 – 5000 rpm Maximum chuck size 200 mm Travel (Z-axis) 750 mm C-axis*Resolution 0.001° Upper tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 270 mm *Z-axis 750 mm *Y-axis + 50 mm Lower tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 205 mm *Z-axis 750 mm EQUIPMENT/ACCESSORIES  Full enclosure with electrical interlock and sliding doors and machine light  Bar loader magazine IEMCA TAL/Auto 65/32 for bar length 3000 mm including: -Guide channel -Centering device -Axial displacement  Thermal compensation systems for the integrated spindle motors (liquid-cooled)  Hydraulic cylinder with draw tube for main spindle  Hydraulic cylinder with draw rod for counter spindle  C-axes for main and counter spindle  Transmit software for easy C-axis programming  Y-axis in the upper turret (cutting force distribution on 2 axes, resulting in extremely high rigidity)  Drive unit in the upper and lower turret  Part ejector and flushing through the counter spindle  Part removal device for the finished parts Finished part max. ø 65 x 200 mm Finished part weight max. 4.5 kg  Conveyor belt for removing the finished parts from the machine  Turret steady rest including VDI 30 base mounted above the coolant supply (14 bar) centrally in the tool turret Diameter range 10 – 70 mm  Coolant system with 2 high-pressure pumps at 14 bar each and 2 flushing pumps at 3.7 bar each  Cleaning gun for cleaning the clamping devices, covers and the entire working area with coolant  Chip conveyor (hinge belt) in extended form for portal design, suitable for: -long steel chips -chip clusters -fibrous chips -dry and wet machining  Electronic oil mist separator 800 – 1000 m³/h  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and counter spindle  HAINBUCH collet chuck size 65 for main spindle, without stop (without collets)  Serial interface  Mounting elements  Documentation Bedpfx Acjyx U Hio Tjdg