Used Embossing Calender for sale (200)

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Pedpfx Ajxp Ntvskiegu Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Photos show machine in production before reconditioning

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Pedpfs Ad Hinjx Akiogu Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Pgjdpfx Akowzx Tfoiju

Year of construction: 2017, condition: used, Machine Configuration • Unwinder • Spot flexo UV printing unit • 5 × wet offset printing units with CABER system • Semi-rotary screen printing unit • 2 × semi-rotary hot foil stamping units Podpjziatgefx Akijgu • Additional semi-rotary screen printing unit • Spot flexo UV / hot air unit • Semi-rotary die-cutting unit • Flatbed embossing unit • Flatbed die-cutting unit • Buffer section • Rewinder Printing & Format Max. printing speed: up to 11,000 impressions/hour Web width: min. 130 mm / max. 265 mm Max. printing width: printing width: 254 mm Max. working width: 254 mm Repeat length: • min. 101.6 mm (4”) • max. 254 mm (10”) Repeat accuracy: 0.01 mm Unwind / Rewind Max. unwind diameter: 800 mm Unwind shaft: 3” (max. 300 kg) Optional shafts: 2” (max. 150 kg) 6” (max. 300 kg) Rewind configuration: • Dual rewind: max. 650 mm each • Single rewind: max. 780 mm Core diameter: 3” Drying System UV Drying (IST/UVITerno) UV power: 166 W/cm Air extraction per UV unit: approx. 550 m³/h Total extraction (UV system): up to 2450 m³/h Materials Suitable for Printing Paper: 80 – 180 g/m² Film (monofilm): 0.1 – 0.25 mm Carton: up to 300 g/m² (max. thickness 0.3 mm) Self-adhesive materials (SK): • PE, PP, PET Production Environment Minimum operating temperature: 18°C Recommended humidity: 40 – 60% Features & Advantages • Multi-process printing (offset + flexo + screen + hot foil) • High precision register control • Semi-rotary converting capabilities • In-line finishing (die-cutting, embossing) • Suitable for high-quality label production • Flexible configuration for complex label jobs

Condition: excellent (used), LAMINATING LINE for panels (particleboards, MDF, HDF) Minimum/maximum panel dimensions: mm 600-1550 (width) x mm 1854-3660 (length) Minimum/maximum panel thickness: PB/MDF mm 8 - 44 (standard mm 16-19-22) // HDF mm 2,5 - 8 Podpfezxrgwjx Akisgu Adjustable working speed: m/min 8 - 29 Minimum/maximum working cycle (Feeder and Stacker): 6 cycles/min - 10 cycles/min 01) "KONTRA" Loading station (with stack chain conveyor, 2 Lifting platforms, Feeding station) 02) "KONTRA" Roller conveyor with length guide rail 03) "KONTRA" 1 Vacuum transporter + 1 Stack chain conveyor for protection boards 04) HYMMEN LAMINATING SYSTEM a. "HYMMEN" Mod. FRB (Cleaning Machine) b. "HYMMEN" Mod. GLK-V (Smoothing Calender to uniform the workpieces surface) c. "HYMMEN" Mod. TLA (Glue spreading machine) d. "HYMMEN" Mod. TRC (Conveyor) e. "HYMMEN" Mod. ADZ (Evaporation / Flashing-off Zone) f. "HYMMEN" Mod. KKL (Laminating Calender) g. "HYMMEN" Mod. DSS (Double-belt continous press) h. "HYMMEN" Mod. PWG (Pressing conveyoring rollers) i. "HYMMEN" Mod. FAA (Foil Unwinding Station) j. "HYMMEN" Mod. GLK (Final Calender) 05) "KONTRA" 1 Speed-up roller conveyor with length guide rails on both sides and pusher 06) "KONTRA" Unloading station 07) "KONTRA" 1 Protection board magazine

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Heidelberg Autoplate with Heidelberg register system Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Largest sheet size: 37 x 52 cm Pgedpfxezwhbbs Akieu Smallest sheet size: 10.50 x 14.50 cm Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour

Condition: ready for operation (used), Year of construction: 2001, Used Ecotack thermal laminating machine Maximum sheet format: 102x142 cm Maximum speed: 75m/ minute Complete with vacuum register station Calender diameter: 450mm with oil heated central Roll elevator Podozt R Enspfx Akiogu Automatic separator Spared rubberized roller Automatic separator Cooling roller with refrigerator Corrugated for light paper Automatic stacker

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Pgodpfx Akewqqv Djiou

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMGATE, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 52 Tandem Emboss Machine is "embossing ready" - including a unique embossing module. Various embossing patterns/rolls available. New, Manufactured 2024 Specifications: Max. production speed: 25 m/min (2121 B2 sheets/h) Max. output of the feed. head: 8000 sheets/h Min. sheet size: 20 × 20 cm Max. sheet size: 56 × 80 cm Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0), Max 1.4 mm (with overlap < 0) Max. paper pile height: 52 cm Thickness of laminating film: 24-50 µm Kind of laminating film: OPP, PET, Nylon Pedpfxjziavue Akiegu Time of laminating roll warm up: Approx. 4 min Sheet overlap accuracy: ± 1 mm Machine dimensions (incl. delivery desk): 3.07 x 1.13 m Consumption of compressed air: 65 l/min Max. consumption of compressed air: 95 l/min Max. pressing force: 15 kN Max. consumption of electricity: 7 kW Machine weight: 820 kg Recommended machine capacity: 100 000 sheets/month Machine Characteristics Comes out of the well-known and proven concept of the Amiga laminator. Thanks to modular design, the embossing module is in fact “inserted” between the laminating unit and separator of standard Amiga. The solution, with two processing units in a row, makes it easy to switch from standard single side lamination to embossing, which creates a special pattern on the laminated surface. 7 standard patterns available. Special patterns on demand. First unit for lamination is always activated and works with IR heated cylinder. Second unit is activated only when embossing is needed. The pattern is created due to sheet preheating before the processing unit and high pressure of PUR roller pressed to the structured cylinder. The cooling of the embossing cylinder helps to "freeze" the pattern to the laminated substrate. Basic configuration Feeder: Komfi single action feeding head. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Additional separation adjustable blowers for reliable separation of sheets from the pile. Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwind air expansion shaft for 3″ reel core. Adjustable spread roll for perfect smoothing of difficult film before lamination roller. IR heating for laminating cylinder. Temperature sensor inside the cylinder for extremely precise regulation. Rubber coated pressure roller for laminating unit, PUR pressure roller for embossing unit. Embossing Unit: Sheet preheater in front of the embossing roller to activate surface before embossing occurs. Powerful pneumatic pressure system to ensure excellent laminating and embossing result. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in perforator to enable sheet separation, placed behind pull rollers to avoid web brakes. Cam driven separation roller. Skewing wheel for fine adjustment of snapping to avoid film flagging. Adjustable speed of snapping roller for perfect separation of difficult jobs. Fixed delivery desk.

Condition: ready for operation (used), Year of construction: 1965, Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible. Pedpozukthjfx Akiogu

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 285, KOLBUS PE 0 – Hot Foil Stamping and Embossing Machine for Hardcover Covers Identification Data • Manufacturer: Kolbus GmbH & Co. KG, Germany • Type: PE 0 • Serial number: 285 • Year of manufacture: 1984 Purpose and Technology • Purpose: Hot foil stamping and embossing on hardcover book covers • Operating principle: Flat press head – the cover is fed onto the working table, while the upper head performs the stamping • Capabilities: Hot foil stamping and blind stamping/embossing, depending on the installed tooling • Foils: Gold, silver, pigment, and other hot-foil materials • Operating temperature: Approximately 130–170 °C, according to the markings on the machine, depending on the foil and application Construction and Equipment • Infeed and outfeed tables with conveyors on both sides of the press head • Automated cover feeding and transport • Belt drive with drive motor • Protective covers over the drive components • Control panel with buttons and selectors • Cycle counter • Safety devices and emergency stop buttons • Large flywheel – mechanical press operating principle • Mobile design for relocation within the production area Format and Productivity – Estimated • Format: Suitable for A5 and A4 size covers • Productivity: Approximately 1,000–2,000 impressions/hour • Productivity depends on: Format, type of foil, number of impressions per cover, impression length, and operating method Price: €14,000.00 Pedpfxsz A A Aze Akiogu

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor Pgjdpfx Aoud H Dmjkiou WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2001, Thermo-lamination system Manufacturer: BÜRKLE Type: FFAII 1300 Year of manufacture: 2001 Technical data: Working width: 1300 mm Panel dimensions Width: 200 - 1300 mm Length: 400 - 3000 mm Thickness: 8 - 40 +/- 0.2 mm Film dimensions Width max. 1320 mm (lateral overhang up to 20 mm) Roll diameter 76 or 152 mm (3" or 6") Working height above floor: 940 mm System speed: 15 - 45 m/min Three-phase drive with vector control Operating side: right Panel feed: centered Pgodpfxezuzt Sj Akiju System configuration FFAII 1300 - Brush machine DBM (chain brushes) - Preheating and smoothing calender GKL, D = 500 mm - Thermo-oiler heater 36 kW - Hardener application machine DAH + complete hardener circulation system with monitoring - Transport section + IR zones with temperature sensors - Adhesive application machine DAK + automatic level sensing - Cooling unit for DOW cooling - Adhesive supply - Conical transport section TKE - Lamination calender EKM, D = 500 mm + film unwinding station + separating station + belt transport section with operator platform for FVE - Expansion shafts - Smoothing calender GKL, D = 500 mm at the inlet of the conveyor belt - Thermo-oiler heater 96 kW for lamination calender and smoothing calender - Central control cabinet - I.S.E. Optimat ISL 111 (year of manufacture 2004) Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Year of construction: 2014, condition: good (used), Machine details Manufacturer: CARTES Model: GT 363 HSD Year: 2014 Machine type: Label finishing / embellishment / converting machine Maximum material width: 360 mm Maximum print / working format: 340 x 320 mm Maximum speed: up to 15,000 cycles/hour Machine layout dimensions: approx. 8,288 mm length x 1,628 mm width/depth x 2,148 mm height Status: Machine is still in production until approx. the end of the year Reason for sale: Replacement by a faster machine _____ Configuration The machine is equipped with the following units: • Unwinder • Corona pretreatment • Flat hot foil stamping unit • 2 x transverse flat hot foil units • 1 x longitudinal foil guide • Foil unwinding 1” • Foil rewinding 3” • Flat screen printing unit • UV-Ray UV curing unit • Flat die-cutting unit • Matrix rewinding, 3” / 76 mm core • Edge trimming knives • Backside slitting / backside scoring • Razor blades for longitudinal slitting • 2 x rewinding shafts, 3” _____ Accessories included • 2nd plate for hot foil stamping • 2 plates for embossing / relief stamping _____ Service and condition The machine is currently still in operation and is reported to be in good working condition. A technical service was carried out by a Dortschy technician in October 2024. FGT condition rating: 8/10 ★★★★★☆☆ This rating is based on the year of manufacture, the current production status, the recent service and the overall configuration of the machine. Final condition remains subject to inspection, technical confirmation and video review. _____ Main advantages • Attractive price compared to the original new price of approx. EUR 244,500 • Strong configuration for premium label finishing Pgsdozkavdspfx Akisu • Hot foil stamping and embossing capability • Flat screen printing unit for special effects and high-value applications • UV curing system included • Flat die-cutting unit included • Matrix removal, slitting and rewinding included • Still in production • Recent service in October 2024 • Compact and complete finishing solution for label converters

Condition: used, machine/vehicle number: 63511, Kalenderstanze - Perfoartion- & Nutmaschine / Calender Punch - Perforiertion - Creasing Machine W. Kroll Gartenberg K80Serial-No. 63511 Arbeitsbreite / Working width max. 800mm Kalenderstanze 3:1 4x4mm mit Daumenlochung Calender Punch 3:1 4x4mm with thumb cut calendar punch Nut- und Perforierwerkzeug / Creasing and Perforation tools Online-Video-Inspection by Skype-Video Pedpsll A Tmsfx Akiegu We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1997, Format: 1300 x 920 mm Equipment: Maximum die-cutting size with front waste: 1,300 x 905 mm Maximum die-cutting size without front waste: 1,300 x 915 mm Maximum embossing size: 1,300 x 900 mm Paper: approximately 80???90 g/qm2 and above Solid board: up to approximately 2,000 g/qm2 Corrugated board: up to approximately 4 mm Equipment: Operating platform Machine raised by approximately 650 mm Removable platform section at the feeder Recently installed asynchronous main motor Manual non-stop feeder pallet Pile table with manual lateral correction during production Adjustable suction unit Automatic feeder-head adjustment Double-sheet detection Sheet down-holder for guiding sheets to the front lays Upper frame with manual lifting device Upper transport equipment for paper and cardboard Die-cutting, pressing/creasing and embossing, separately or simultaneously Oil conditioner for maintaining the correct operating temperature Automatic removal of internal and marginal waste Pgjdpfx Aksz Hnayeieu Condition and availability

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Psdpfewtw E Dsx Akijgu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, mileage: 79,711 km, power: 70 kW (95.17 HP), first registration: 02/2023, fuel type: diesel, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, sliding door, soot filter, traction control, * Please schedule an appointment for a consultation or test drive by phone before your visit. This will help you avoid waiting times and allow us to dedicate sufficient time to you. * Non-smoking vehicle * This vehicle has a well-maintained service history booklet with Mercedes-Benz * Last service performed at 61,839 km TRANSMISSION / CHASSIS * Panel van * Transmission: 6-speed * Engine: 1.5 Ltr. - 70 kW CDI CAT APPEARANCE * Equipment package: designo interior * Design and equipment line: PRO * Dashboard in black embossed plastic * Interior trim: high-gloss black decorative elements * Warning system for seat belts, driver/front passenger side * Interior package: chrome * Preparation for roof rails * Paint color: arctic white * Sliding door rail cover in vehicle color * Handle strip in black embossed LIGHT & VISIBILITY * Rain/light sensor * Fog lights LED * LED lighting in the cargo area * Interior lighting LED * Interior lighting LED front Podpfx Aoyy Hw Nokiogu * Turn signal in exterior mirror, halogen technology ENTERTAINMENT * Multimedia system MBUX with DAB * Communication module (LTE) preparation Mercedes me connect * Audio system MB with DAB * Mercedes me connect * Digital radio (DAB) * Smartphone integration * Steering wheel with multi-function buttons * Instrument cluster with color display * Radio reception digital (DAB) preparation * Preparation for Remote Service Plus ASSISTANCE SYSTEMS AND SAFETY * Rear view camera * Parktronic system (rear) * Driving assistance system: Attention-Assist (fatigue detection sensor) * Start/stop system * Cruise control * Driving assistance system: active brake assist * Mercedes-Benz emergency call system * Traction control system (ASR) * Driving assistance system: hill-start assist * Thorax sidebags and windowbags in front * Parking brake COMFORT * Seat heating front left * Front passenger double seat * Interior trim basic * Lumbar support for front left seat * Sliding door, cargo/passenger compartment, right * Plastic floor in the cargo area * Air conditioning * Rear double doors without glazing (opening angle 180 degrees) * Lockable glove compartment * Heat-insulating glass * Windshield washer fluid reservoir * Plastic floor in the front passenger compartment MISCELLANEOUS * Solid partition * Body/structure: panel van * Low emissions according to emission standard Euro 6d * Fuel filter with water separator * Diesel particulate filter * Weight variant 2,027 kg * And much more * The above information is provided without guarantee. It does not constitute an agreed-upon specification. Errors and prior sale are reserved. * Our services: * Financing possible, even without a down payment * Registration service * We will buy your old car * Delivery possible * Tire service, winter and summer tires available for an extra charge * We also speak several languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Year of construction: 2016, condition: good (used), Label finishing line PRUDENTE FU 300 Year of production: 2016 Pgedpfsun Nyysx Akiou Material width max: 330 mm Unwinder with tension control Hot stamping unit Silkscreen unit with UV drying unit ( manufacturer UV RAY). Flat die cutting/ embossing unit Rewinder

Year of construction: 2019, condition: used, We are selling several used marking, beading, drawing, thread embossing, and tabbing tools from Pass Stanztechnik that were used on our Trumpf TruMatic 7000. We also have various smaller tools as well as spare and wear parts available. A complete list can be sent via email. Pgsdpfxeyu Tl Uo Akiju

Condition: used, Year of construction: 2008, functionality: fully functional, Heidelberg TD112/442 folding machine year 2008/2001 composed of: pallet feeder with double Tremat sheet separation head, 1st and 2nd group 112 with four pockets, 1st group with used rollers in excellent condition, 2nd group with rollers overhauled by WITT Germany, 3rd group 78 with two pockets and new rollers from WITT Germany, equipped with a new compressor. Refurbished. Optional stacker with calender available on request (price not included). Podsyzpn Hjpfx Akijgu

Year of construction: 2021, condition: good (used), CARTES CE 162 HH - Machine Series: CE160 - Year of Manufacture: 2021 - Serial Number: 216359 Technical Specifications Input and Unwinding Unit: - Integrated unwinder with web tension control - Overprinting photocell for precise register alignment Hot Foil Embossing Stations: - First station: Hot foil stamping unit with transverse foil feed - Second station: Hot foil stamping unit with transverse foil feed Cutting and Processing: - Ultrasonic cutting unit for resin-free textile labels - Maximum web width: 80 mm - Independent cutting mode enabling cuts after each print or every 2nd, 3rd, 4th, or 5th cycle Control and Operation: - Integrated silk screen printing unit (SN 161) - Touchscreen interface for intuitive machine control Drying and Accessories: Pjdsycv Hkepfx Akijgu - Infrared drying oven suitable for conventional and specialty screen printing inks - Overprinting photocell for register accuracy Additional Equipment: - Longitudinal slitter with three adjustable pressure knives - Additional slitting units Why Choose This Machine? The CARTES CE 162 HH is a high-end hot foil embossing platform engineered for converters who require exceptional precision, reliability, and versatility. Thanks to its dual hot stamping stations, advanced register control, and robust CARTES build quality, it ensures outstanding foil application even at high production speeds. This machine is the premium solution for producing high-value labels in the wine, spirits, cosmetics, and pharmaceutical sectors.

Condition: ready for operation (used), Year of construction: 2008, Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available. Pgsdpfx Aswxb Igskiou

Condition: new, functionality: fully functional, Drum Cooler CCn -120/70 for powder coatings Main unit, including • Cooling calender with stainless steel cover, steel belt and crusher unit • Additional edge sealing parts • Stainless steel mainframe, rails Akzo standard • Additional safety switch monitoring working position • Water collecting tank stainless steel Pgedpfsw Snfdjx Akiju • Airknife and rubber scraper • LEV taper in crusher housing top • LEV product outlet funnel • Sliding cover after calender • Lototo Switches with trapped key for crusher and calender hood • Software and Hardware integration of safety switch of safety inlet device incl. safety PLC extension. Safety switch from BBA Innova, all other hardware from customer side.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) Pjdpfxsuggb Dj Akiegu (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.