Used Elumatec Spare Parts for sale (137)

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: Rcodpfx Aowwtw Dokieh 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Additional tehnical specifications available on request

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1613030303, Saw blade diameter 280 mm Saw blade speed 3,200 rpm Power supply 230/400 V, 3~, 50 Hz Power output 1.05 kW Redpfx Akoz S Naysisch Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg Accuracy is achieved by cutting from below Wide pivoting range of up to 0° to the right and up to 45° to the left The special pivoting mechanism with integrated turn table enables working from the front at any angle position The workpiece stop is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles Manual material clamping unit (vertical) Machine is ready for operation, saw blade was sharpened

Year of construction: 2001, condition: used, Max. drum length: 7,500 mm Max. saw blade diameter: 550 mm Control E 550 Swiveling inside and outside motorized up to 140 degrees at both units (3-axis machine) Rodpfx Aozzmixjkioch Pneumatic tilting of the angle between 45 and 90 degrees with digital angle display Minimum quantity spray device Machine is loaded free

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements Rcsdpfx Akszxc Rmoioh The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Rsdpfx Ajzy Staekijch Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg The machine is in perfect working order We can ship the machine to your address (On demand)

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Rcjdpfx Aezzw Edekijh Total spindle hours: 11,583 h

Year of construction: 2007, condition: ready for operation (used), Rcodpfx Akeyt E D Tjieh

Condition: good (used), Year of construction: 2002, Double miter saw, manufactured by elumatec, type: DG79/32, year of manufacture: 2002. Digital display for length. 6-meter machine. Oil-mist lubrication system. Machine documentation available. In good condition. Saw blade: 380 mm x 3.6 mm / 3.0 mm x 32 mm. Redpsz Hmx Iofx Akioch Further details can be found in the data sheets.

Condition: used, Year of construction: 2013, We are offering for sale a two-head Elumatec ZS 720/00 LV welding machine, manufactured in 2005, designed for welding PVC profiles for the production of windows, doors, and frames. The two-head configuration allows for the simultaneous welding of two corners of the frame, ensuring precise processing and good productivity. The machine is characterized by its robust Elumatec construction and is suitable for professional use in companies that manufacture PVC window and door frames. Technical specifications: Manufacturer: Elumatec Model: ZS 720/00 LV Year of manufacture: 2005 Type: two-head welding machine Application: welding of PVC profiles Electrical supply: 3/N/PE – 380/400 V Frequency: 50/60 Hz Redpjzmhuaofx Akiech Installed power: 5.2 kW Operating pressure: 7 bar CE marking Made in Germany The machine is used and is available at our location in Termini Imerese, Palermo. It can be viewed by appointment. Additional photographs, technical information, and videos can be provided upon request.

Condition: excellent (used), Year of construction: 2011, The machine in a very good condition. 7,6 meters long, 2 working places. Possible to give a warranty up to 6 month. Rcsdjyia Ezspfx Akijh

Year of construction: 2005, condition: good (used), Dvigalves suvirinimo stakles. Rodozdqpbjpfx Akijch

Year of construction: 2014, condition: good (used), The Elumatec SBZ 130 is a 3-axis profile machining center designed for efficient processing of aluminum, steel, and stainless steel profiles. All operations, such as milling, drilling, and threading, are performed on a stationary profile, which protects its surface. - Axes: 3-axis control, with a tool spindle as an additional axis. - Machining length (X-axis): 7200 mm - Travel (Y-axis): standard 485 mm (Vmax. 60 m/min) Redpfx Aksyt H Uyeioch - Travel (Z-axis): standard 340 mm (Vmax. 60 m/min) - Spindle speed: standard 6000 rpm, optional high-speed spindle (18,000 rpm) - Spindle power: 5.5 kW - Tool magazine: integrated revolving tool head for 8 tools or 4 angled heads, ensuring short tool change times - Control: Windows operating system with eluCam software; 18.5" PC panel, with USB ports and network connection - Clamping system: automatic positioning of pneumatic clamps - Compressed air supply: 7 bar MACHINE: Prepared tooling dedicated to PVC and steel processing: - Tool holders, - Reducer for steel processing, - Special tools with chip breakers, - Dedicated programs for processing door profiles. The head was replaced in 2025.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Rcsdpsw A Rv Iofx Akieh Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: used, Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,550 mm, saw blade speed: 2,800 rpm, overall weight: 280 kg, For sale is an elumatec SA 73/35 sawing machine, manufactured in June 2006. The machine is suitable for the automatic cutting of aluminum. Rcsdsz D Ahmspfx Akioh

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder Rcjdpfxszxc Swo Akish - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 104 912 6952, Offer 26342 Technical data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Cutting range, see diagram attached - Swivel range inwards, pneumatic 90° - 22.5° - Tilt range inwards, pneumatic 90° - 45° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watts - Compressed air connection 7 bar - Air consumption per working cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 7500 x H 1600 x D 1600 mm - Weight approx. 1800 kg Rcsdpfs Aa I A Ujx Akish - including: - manual cutting length adjustment with digital display, - swiveling and tilting saw head for high and wide profiles, - also allows for alternating cuts, 22.5° inwards swivel, - digital degree display - separate control cabinet, - cycle spray device

Condition: used, Year of construction: 1993, Press height 140 mm Rsdpfx Akjz Hx Ibsioch Press force 70 kN (7 t) Hydropneumatic drive Compressed air connection 7 bar Air consumption per operating cycle 35 l Length 1,100 mm, Depth 950 mm, Height 1,230 mm Weight 550 kg

Condition: used, Year of construction: 1988, A twin-spindle copy milling machine is offered for sale. Equipped with pneumatic clamping elements and a copying attachment. Inspection possible by arrangement. Rodpfx Ako Aga Hzsijch

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Rcodpfx Aezbb Rrjkijh

Year of construction: 2013, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Rsdszx U S Njpfx Akiech Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Excellent technical condition of machine. Rsdpfx Akewltqajiech

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1420099235, Ideal machine for high-volume series production when cutting at 90° and 45° Equipped with E 111 digital display and handwheel adjustment. Vertical pneumatic material clamping unit Rcodpfxozx Eqcs Akijh Cutting length variant 3,000 mm Tilting range pneumatically from 90° to 45° Saw blade diameter 500 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 4 kW Compressed air supply 7 bar

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Rsdpfx Ajuiy Ngskijch Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Year of construction: 2010, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control Windows XP with Elusoft Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying Rjdpfszx D Rusx Akijch 2 angle heads and a high-speed spindle Right-angle gearbox with saw blade diameter up to 254 mm (only 90° cuts possible) Tensioner detection and automatic displacement 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Complete external and internal corner machining. Support table. Rsdpfsy U Rbnox Akiech