Used Ejector Sleeve for sale (1,567)

Condition: new, Manual mini punch grinding device for cutting punches, ejector pins, sleeves, and other rod-shaped parts. Suitable for grinding round profiles on surface or tool grinding machines. For workpieces up to max. Ø 10 mm and lengths up to max. 300 mm. Roundness accuracy 5 µm. Weight 3.5 kg. Hedpfjymyqbjx Akisw

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Hodsz H N Hhepfx Akiow Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Hsdsrg Nzuepfx Akiew Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2014 Hedpfx Akj Aggumsiew • Machine no.: 7230-0232 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm • Control system: NC5 / CDIAS • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20044G, total length: 5,000 mm, total height: 2,100 mm, total width: 1,500 mm, input voltage: 220 V, power: 4 kW (5.44 HP), For sale is a used sleeve labeling machine, including a shrink tunnel and conveyor belt, taken from an industrial packaging line. The system was used for the automatic application of shrink sleeve labels to bottles, cans, and other containers and is particularly suitable for applications in the beverage, food, and packaging industries. The machine features a robust, industrial-grade design with a stainless steel housing and can be integrated into existing packaging and filling lines. Condition: The system is used and has been partially refurbished. It was last in working order. However, due to its used condition, the sale is made without any warranty regarding completeness, current control function, or suitability for a specific application. An inspection and technical assessment before purchase are recommended. Scope of delivery: Sleeve labeling machine Shrink tunnel Conveyor belt Existing attachments and components as per inspection Individual sale possible: Hodpfx Aexvbz Eokiow If interested, individual machine components or assemblies can also be purchased separately. Inspection possible by appointment. Further technical information, images, and dimensions are available upon request.

Condition: used, This listing is for the Gilson PIPETMAN P10 1-10uL Single Channel Pipette with Metal Ejector Colourcode Red The unit is in full working condition and is ready for immediate use The traditional “L” version: robust, bomb‑proof build, fully autoclavable stainless steel tip‑ejector, volume adjustable 1–10 µL. PVDF and stainless exterior, designed to be durable in tough lab setting Fully adjustable 1–10 µL range with fine decimal display Hsdpfx Aexv Dt Dokijw Dual-position metal tip ejector supports D10 and DL10 tips Low pipetting resistance, especially in G-series (≈2 N force) PVDF body + stainless steel parts for chemic

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Hodpfeygtzysx Akisw

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Hodpfjrg Nzqox Akiew Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Hjdpfxsrg Nzxj Akiew Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL031303405S, For sale is a single unit consisting of a textile carousel with a matching conveyor dryer: M&R Sportsman EX 8/6 textile carousel, built in 2013 Total print count: 1,168,378 Diameter: 386 cm Weight: 1,497 kg Power supply: 380 V Pallets: Textile - 40 x 55 cm, 8 pieces Pockets - 30 x 40 cm, 8 pieces Sleeves - 15/12 x 40 cm, 8 pieces Squeegees: 6 x flood and 6 x pressure squeegees Screen fit with TRI-LOC M&R Radicure D 36/6-3 conveyor dryer, built in 2012 Conveyor width: 91 cm Drying channel length: 183 cm Total width: 127 cm Total length: 305cm Hedpfxsv Iy H Io Akiew Weight: 817kg Power supply: 380V Price negotiable

Condition: used, Year of construction: 2008, machine/vehicle number: 0007-2008, 4 chambers with dry steam, glass doors, suitable for this Number available (price per tank): 1 electrical power supply kW: 5 Sleevetunnel chambers: 4 Hedpfxsz Suu Ao Akiow Strom / Volt: 400

Condition: new, Bernardo GB 30 Vario geared drill press Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 35 mm Maximum threading capacity: M22 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 3 Spindle speed / 2 speeds: 70 - 495 / 495 - 3500 rpm Feed rate: 0.1 / 0.2 / 0.3 mm/rev Overhang: 280 mm Distance spindle / table max.: 650 mm Distance spindle / base plate: 1120 mm Hodpfjgd H Uusx Akijw Quill stroke: 125 mm Column diameter: 110 mm Table size / T-slot size: 450 x 380 mm / 14 mm Work area base plate: 340 x 330 mm Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Machine dimensions (W x D x H): 500 x 800 x 2100 mm Weight approx.: 320 kg Scope of delivery • Drill chuck arbor MK 3 / B 16 • Reduction sleeve MK 3 / 2, MK 3 / 1 • Gear-type drill chuck 1 - 13 mm / B 16 • Coolant system • Electromagnetic spindle feed • Threading device • Automatic tool ejector • LED machine light • Digital speed display • Initial filling with Shell Tellus 46 • Height-adjustable protective cover

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits Hodpfsy Hty Dox Akijw • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: used, Year of construction: 2021, Elements: Product transport/transfer area, robot stations, packaging material feed, forming/transfer area, multi-lane magazine/handling area, number of suction stations: 16, with CE marking. An on-site inspection is possible. Hedpfx Aozxhk Sjkiew

Condition: used, Year of construction: 2013, machine/vehicle number: ET255, Used FUJI 410 sleeve applicator labeling machine for PET 10000 BPHTechnical Specifications & Performance DataThe Fuji Seal 410 DT-STH-DHA is an automatic linear sleeve labeling machine designed for the application of sleeve labels to PET bottles. Built in 2013, this high-performance unit reaches a maximum output of 10,000 bottles per hour, supporting efficient label application in industrial packaging and beverage production environments.Manufacturer: Fuji SealModel: 410 DT-STH-DHAYear of construction: 2013Maximum speed: 10,000 bottles per hourMachine configuration: LinearContainer material: PETCurrent bottle format: 2.0LLabeling method: Sleeve applicationMaximum reel diameter: Ø 500 mmWorking table height: 1200 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for controlled and simplified operation. Its six-reel configuration and automatic reel changeover are designed to support continuity during production, reducing interruptions associated with reel replacement. Clockwise operating direction is specified for integration planning and conveyor layout.Siemens PLC control system6 label reelsAutomatic reel changeoverElectrical supply: 400V, 3 Ph+N+TElectrical rating: 16ACompressed-air pressure: 6 barProduction Line Integration CapabilitiesThis sleeve labeling machine can be positioned downstream of filling and capping equipment and upstream of secondary packaging machinery in a used bottling line. Its linear architecture is suitable for inline PET bottle handling and can be coordinated with conveyors, accumulation systems, inspection equipment, shrink wrappers, and palletizing equipment. The stated 2.0L format provides a defined basis for assessing bottle-handling components and change-part requirements.Automatic sleeve labeling is applicable to beverage production lines processing soft drinks, still water, sparkling water, milk, beer, wine, alcoholic beverages, oil, and preserved products. As with other industrial packaging machines, line synchronization should consider bottle stability, conveyor speeds, sleeve material, and downstream package requirements.Machine Condition & Maintenance HistoryThe machine is stated as ready for use, refurbished, and supplied with compatible spare parts. A 6-month warranty is indicated. This condition makes the unit suitable for operators seeking second hand bottling equipment intended for prompt integration into a production line. The machine is offered under an as-inspected sale condition.Operational Performance & VersatilityThe Fuji Seal sleeve labeling system is intended for accurate automatic application of sleeve labels on PET bottles. Sleeve labeling provides a versatile decoration solution for beverage production and industrial packaging, allowing bottle presentation to be adapted to product and brand requirements. The label magazine, six reel positions, and automatic changeover arrange... Hodpfx Ajz E Dg Hokisw

Condition: new, Bernardo geared pillar drill GB 50 HS Drilling capacity in steel: 50 mm Drilling capacity in cast iron: 60 mm Maximum threading size: M42 Drill chuck: 1 - 13 mm / B 16 Morse taper: MK 4 Spindle speed / number of stages: 40 - 2100 rpm / 12 Feed range: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Overhang: 370 mm Distance spindle / table (max.): 600 mm Distance spindle / base plate: 1190 mm Quill stroke: 250 mm Column diameter: 200 mm Hjdod Tm T Hjpfx Akiow Table size / T-slot size: 600 x 500 mm / 14 mm Motor power: 2.2 / 2.8 kW Machine dimensions (W x D x H): 700 x 1050 x 2350 mm Weight (approx.): 670 kg Scope of supply • Gear-type drill chuck 1 - 13 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Reducing sleeve MK 4 / 3, MK 4 / 2 • Motorized table lift • Coolant system • Electromagnetic spindle feed • Threading device • Automatic tool ejector • LED machine light • Initial filling with Shell Tellus 46 • Digital speed indicator • Digital depth indicator • Height-adjustable protective shield

Condition: used, Year of construction: 2016, Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Hjdpfxsk Abhhs Akiew Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request. Hodpszk U E Tefx Akisw

Condition: used, Skinetta ASK 450 Stretch Banding Machine Intended use of the machine: The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink-wrapping machines, the film is stretched tightly around the packaging before sealing. This tension is the main advantage of the process, reducing film consumption by up to 20%. A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering. The film is sealed in a very small area (welded), creating a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the overhanging film overhang can be reduced laterally. This increases the stability of the container and prevents individual products in correspondingly grouped containers from falling out sideways. With suitable additional devices, a complete closure of the containers is possible by sealing, crimping, and folding the sides. The SKINETTA stretch banding machine program includes six basic models for film widths from 25 mm to 200, 290, 440, 590, 790, and 1250 mm. To increase output, two- to four-lane systems are available in addition to the single-lane version. - With the SK series (semi-automatic), the products are grouped on the machine table by an operator. Insertion into the film and the subsequent stretch banding process is triggered either by a foot switch or a two-hand control. Full automation is possible at a later date (except for the SK 200 model). - With the ASK series (fully automatic), the products are fed, grouped, and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming, and special equipment, based on over 20 years of experience, allows adaptation to the most diverse customer tasks with proven standard elements. Technical data: Machine dimensions (base machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Hsdpjp U T Ifofx Akiew Weight: 400 kg Power connection: 400 V Power consumption: 6.1 kW Additional equipment: slat conveyor You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 Hjdpet Hw D Refx Akiew _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Transnorm accumulating roller conveyor with ejector 3820-700-645 RA2279 Make: Transnorm Running direction: both directions Roller width (RB): 645 mm Nominal/outer width (NB): 700 mm Length: 3820 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, WA20/T DR63L4/TH and 24 V drum motor Electrical data: V 380, kW 0.25/S1 Frame height: 120 mm A total of 6 modules available with 2 dischargers each. price per element There is a storage space between each discharger as a buffer Conveying speed: 0.33 m/s Optionally available: Supports Side guides on one and both sides Hjdperuq Raofx Akiow Frequency converter for stepless speed control Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: repair required (used), UDA 150 S - carton feeder or sleeve feeder suitable for mounting a printer or label applicator - widely used in the pharma industry - For parts or repair - some spares with the machine and basic wiring details. Hedexyyz Ejpfx Akiow READY TO SHIP WORLDWIDE Export documentation and shipping available

Condition: used, Year of construction: 1997, Belt conveyor slider 11170-55-50 Make: Transnorm Year 1997 Length:1170 mm Belt width: 50 mm Stand dimensions: 200x100 mm Current conveyor belt height: 100 mm Distance between mounting plate and swing plate: 100 mm (swing mechanism): 100 mm Maximum ejection rotation angle: 360° Belt conveyor speed: 0,64m/s Electrical data Hjdpfxeur Anrs Akiow Belt conveyor motor data: V300-500, kw 0,25/S1 Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Hodpe Af H R Uefx Akiew Technical data: - Blade: WP - Flight circle (ø): 150 mm - Bore: 40 mm - Marking: MAN - Length: 4–7.5 mm - Material: Steel

Condition: used, Transnorm roller conveyor with ejector 6200-700-640 RA2278 Make: Transnorm Running direction: both directions Roller width (RB): 640 mm Nominal/outer width (NB): 700 mm Length: 6200 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, RF27 DT80N4/MM07/BW1 Electrical data: V 380, kW 0.75/S1 Frame height: 120 mm Total of 2 dischargers Conveying speed: please contact us Optionally available: Supports Side guides on one and both sides Frequency inverter for stepless speed control Length adjustment (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. Hedpfx Akjruq N Ssijw We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics