Used Egv 12 for sale (20,756)

Condition: used, mileage: 235,283 km, power: 350 kW (475.87 HP), axle configuration: 4x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, - Brake system Pgsdpfey D Dm Nox Ampsk For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Mercedes-Benz Actros 1848 L 4x2 skip loader Body: Meiller AK 12.T, radio remote control, axle, wheel mounting track, narrow, front axle 8.0 t, front axle cranked design, rear axle with 440 crown wheel, hypoid, 13.0 t, rear axle with active lubrication, unregulated, axle ratio i = 2.611, electronic braking system with ABS and ASR, heater, electronic air supply unit, electronic air supply and control, medium, disc brakes on front and rear axles, electronic parking brake, secondary oil retarder, condensate monitoring for compressed air system, steel compressed air tank, additional compressed air tank, trailer brake, 2-line, brake connections left, trailer stability assist (TSA), trailer brake connection rear, Duo-Matic + standard, frame overhang 1500 mm, wheelbase 4000 mm, one-circuit steering, stabilizer front axle, additional stabilizer rear/trailing axle, smoker package, compressed air connection in cab, driver's air-sprung comfort seat, co-driver function seat, seat backrest release, driver's seat, lower comfort bed, PremiumComfort mattress lower, seat cover velour, shaving mirror, curtain across bed(s), LED ambient lighting for driving and living, electric stationary air conditioning, automatic climate control, residual heat utilization, hot water auxiliary heater cab, additional thermal insulation, storage compartment lids driver and co-driver side, drawer under ledge, storage compartments above windshield, electric sliding/tilting glass sunroof, low seat box, lowered by 40 mm, pre-installation for upper comfort bed, wide, high load parameter level 2, regulated alternator 24-30 V/150 A, AGM batteries 2 x 12 V/220 Ah, maintenance-free, circuit breakers, auxiliary socket 12 V/15 A in co-driver footwell, power socket 24 V/25 A in co-driver footwell, socket 24 V/15 A in right-hand sidewall compartment, night drive light switch, 24 V trailer socket, 15-pin, reverse warning system, cable remote control for air suspension, L-cab StreamSpace, 2.30 m, tunnel 170 mm, comfort steel-cushioned cab suspension, exterior storage compartment lid left, exterior storage compartment lid right, exterior sun visor transparent, A-pillar trim, tinted windshield, heated front mirror, main mirror with maneuvering position passenger side, air horns cab roof, plastic corner bumper, center bumper part with towing eyes, door extension, driver cab access left/right, fixed, central locking system, comfort central locking, light sensor, rain sensor, economy/power driving program, Predictive Powertrain Control, transmission G 281-12/14.93-1.0, single disk clutch, Mercedes PowerShift 3, air suspension rear axle, digital tachograph 2nd generation, ADR, tachograph manufacturer VDO, two-way speakers, aux-in right-hand sidewall compartment, navigation system, CB radio 24 V, multimedia cockpit interactive, Remote Online, main fuel tank left, 390 L tank left, 650 x 700 x 1000 mm, aluminum, AdBlue tank 75 L left, lockable tanks, protective cap for AdBlue dosing system, exhaust system with tailpipe to right side, lighting according to UN-R 48.06, Bi-Xenon headlights, LED daytime running lights, automatic high/low beam and cornering lights, halogen fog lights, lower work lights, headlamp cleaning system, undershield against dust turbulence, torque increase in...

Condition: good (used), machine/vehicle number: 3458, Year of construction: 2016, load capacity: 22,000 kg, lifting height: 4,500 mm, mast type: duplex, total length: 6,090 mm, total width: 3,050 mm, operation weight: 36,800 kg, additional equipment features: Dual tread, Centralized greasing system, Equipment: lighting, Kalmar DCG220-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Pgjdpfxsyuikge Ampjk Wheel size – Drive wheel: 14.00-24 Wheel size – Steering wheel: 14.00-24

Condition: good (used), machine/vehicle number: 3428, Year of construction: 2015, load capacity: 25,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total length: 6,150 mm, total width: 3,200 mm, operation weight: 34,380 kg, additional equipment features: Dual tread, Weight system, Warning triangle, Centralized greasing system, NATO-socket, Equipment: lighting, Kalmar DCG250-12 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 14.00-24 Wheel size – Steering wheel: 14.00-24 Pjdoyuiguopfx Ampsgk

Condition: used, Year of construction: 2021, operating hours: 450 h, machine/vehicle number: Z62M-1621, fuel type: diesel, Weights Empty weight: 10.619 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 2.100 cm Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Outrigger Max. horizontal reach: 1250 m Pjdpfx Aowwghiempjgk Transport dimensions (LxWxH): 7.58x2.49x2.9 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, operating hours: 17,396 h, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Volvo, fork length: 2,100 mm, Weights Empty weight: 24.880 kg Functional Lifting capacity: 16.000 kg Maximum passing height: 440 cm Number of valves: 3 CE mark: yes Pgodoyy Iaropfx Ampok Condition General condition: average Technical condition: average Visual appearance: average Other information Fork carriage: Fork spreading Additional information Please contact Bas Sindorf for more information

Condition: used, Year of construction: 2007, operating hours: 26,552 h, lifting height: 4,970 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Volvo, fork length: 2,100 mm, Empty weight: 24.680 kg Lifting capacity: 16.000 kg Maximum passing height: 416 cm Number of valves: 3 Fork carriage: Fork spreading Pgodpeyy Ialofx Ampjk Please contact Bas Sindorf for more information

Condition: used, mileage: 56,386 km, power: 235 kW (319.51 HP), first registration: 06/2020, fuel type: diesel, number of seats: 60, gearing type: mechanical, emission class: euro6, color: other, brakes: retarder, total length: 12,400 mm, total height: 3,350 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = - Retarder - Webasto = Further Information = Damages: none Pgedpfx Asyyldnempjk = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, functionality: unexamined, machine/vehicle number: M11359*17765, Year of construction: 2018, Swedish Manufacture Load Capacity & Mast • Load capacity: 12,000 kg at 1,200 mm load center • Mast: Duplex standard o Lift height: 6,500 mm o Collapsed height: 4,895 mm o Extended height: 8,100 mm o Free lift: 0 mm • Tilt: 5° forward / 10° backward _____ Dimensions • Length: 5,205 mm • Width: 2,550 mm • Height: 2,905 mm • Wheelbase: 3,500 mm _____ Attachment: STEINWEG Stone Stacking Grab Type HG1T-6000S • Gripping range: 0.96–1.00 m • Opening range: approx. 0.6–1.3 m • Gripping height: 1.3 m (special height) • Grab capacity: 6,000 kg • Double gripping rails: 1 pair, shock-absorbed plastic jaws, length: 2.3 m • Pendulum-mounted • Forklift carriage arm: Double-beam design, with endless rotator and pendulum suspension, capacity: 8,000 kg at outreach 1.6–2.1 m • Hydraulic outreach: 1.6–2.1 m • Stabilizers: 2 units for compensating pendulum movements • Integrated sideshift: travel 250 mm • Lock valves: Electromagnetic, 24 V DC _____ Wireless Pressure Monitoring • Transducer: Wireless transmission, frequency 868.4 MHz • Temperature range: -30°C to +85°C • Battery: 3.6 V lithium, approx. 1 year lifespan (with 5-second interval) • Receiver: Digital display, signal lamp, control box mounting _____ Powertrain & Chassis Component Description Engine Volvo TAD-871-VE, 6-cylinder, 185 kW at 2,200 rpm, 7.7 L displacement, 1,160 Nm, EU Stage IV Transmission ZF 4WG-191 automatic, 3+3 gears Drive axle Kessler D81 Steer axle Hydrostatic, double-acting steering cylinder Tyres Drive axle: 4 × 12.00 × 20" Solid Hauler Steer axle: 2 × 12.00 × 20" Solid Hauler Pjdpfsyyvvhox Ampogk Braking system Oil-immersed wet disc brakes, hydraulic parking brake (spring applied, electronically controlled) Hydraulics Parker load sensing system, variable pump capacity, 4 servo-assisted control levers Electrics 2 LED front headlights, 2 LED work lights on mast, 4 indicators, LED rear lights, CanBus control for engine, transmission and cabin _____ Cab & Equipment • Driver's seat: BeGe 9100, air-suspended, 2-point seatbelt • Cabin: OPTIMA, ergonomic, high noise and vibration insulation, hydraulically tiltable to the side, 2 doors, tinted windows, sliding windows on both sides • Windscreen wipers: front, roof, rear window incl. washer system • Steering wheel console: Adjustable • Heater & defroster • Interior cabin lighting • Rearview mirror, parking brake warning buzzer _____ Additional Equipment • Mud flaps front & rear • Exterior rearview mirrors on fender (high) • Turbo II Heavy Duty air filter • Additional hydraulic function • Quick couplings on fork carriage • Hydraulic accumulator/vibration damper 60 bar/2 L • Hydraulic oil tank pre-heating • Additional LED work lights (2x on mast) • Reversing alarm, LED beacon • Electric cables above mast • Power connection 400 V, 3-phase • Blue Spot front and rear • EMC 107 electronic weight display (0.1 t) • EMC 114 electronic joystick with RPM boost • EMC 122 speed limiter 20 km/h, switchable to 15 km/h • Electric seat heating • DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers • Intermittent wiper • ACC air conditioning • SMV universal mounting rail • Movable A4 writing pad • Diesel parking heater + engine water heater

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: VWASGFF24A2114884, power: 81 kW (110.13 HP), mileage: 42,800 km, axle configuration: 2 axles, lifting height: 16,100 mm, lifting power: 210 kg/m, overall weight: 3,500 kg, empty load weight: 3,500 kg, construction height: 2,920 mm, fuel type: diesel, Working height: 18.10 m Platform height: 16.10 m Lateral outreach: 12 m Load capacity: 210 kg Psdoy Edbvepfx Ampegk Self-leveling: No Vehicle length: 6.70 m Vehicle width: 2.10 m Vehicle height: 2.92 m Adjustable front outrigger width: 2.67 / 3.45 m Rear outrigger width: 2.63 m Engine drive: Diesel Platform drive: Diesel / Electric 230V

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, complete wheels -Manufacturer: Deestone, tire with rim Pgedjywhcujpfx Ampok -Tire size: 26x12.0-12 NHS -Bolt circle: Ø 206 x 20 mm -Hub bore: Ø 160 mm -Number: 5 tires available -Price: per piece -Dimensions: Ø 635 x 270 mm -Weight: 74 kg/unit

Condition: good (used), machine/vehicle number: 3440, Year of construction: 2013, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, total length: 5,700 mm, operation weight: 23,880 kg, additional equipment features: Dual tread, Centralized greasing system, NATO-socket, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Pedjyuihlepfx Ampogk Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: good (used), machine/vehicle number: 2707, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Engine heater, Centralized greasing system, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Podpsyuhr Aofx Ampjgk Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: used, mileage: 698,000 km, power: 240 kW (326.31 HP), first registration: 12/2015, fuel type: diesel, number of seats: 36, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Solaris Urbino 12 city bus – 36 seats / 36 standing places – ZF automatic transmission – 2 units available * Diesel – 10,837 cc – 240 kW – 327 hp – Euro 6 – Green emissions sticker – TÜV NEW Pgodpjy Aq Nhsfx Ampok * 36 passenger seats + 1 driver seat – 36 standing places – 1 wheelchair space – 2 doors * Auxiliary heater / radio / ABS / ASR – air conditioning – LED destination display * Vehicle dimensions: Length: 12,000 mm x Width: 2,550 mm x Height: 3,200 mm * German vehicle – German registration documents – Vehicle available immediately * We also have more Solaris Urbino buses: * Bus 2 Solaris Urbino 12 – First registration: 10/2014 – 985,000 km – Euro 6 * Bus 3 Solaris Urbino 12 – First registration: * Bus 4 Solaris Urbino 8.9 – First registration: .000 km – Euro 6 * Subject to errors, misprints, and prior sale – Sale on behalf of customer – * Viewings & test drives by appointment only * Contact person: Andreas Vogel * IMPORTANT – Vehicles are stored offsite – Please confirm the exact location – IMPORTANT –

Condition: used, machine/vehicle number: 16936, Year of construction: 2019, operating hours: 808 h, load capacity: 2,000 kg, lifting height: 2,500 mm, load center: 600 mm, construction height: 1,700 mm, fork length: 1,200 mm, overall weight: 1,062 kg, enginetype: Lithium-ion, manufacturer: Jungheinrich Pjdpfxeyv S Sdo Ampogk

Year of construction: 2022, condition: new, -1- unused, top cover for impact mill SBM 12/12/4 RHS, unused top cover for SBM 12/12/4 RHS Pjdpfx Ameu Spmpjpsgk

Condition: like new (used), Year of construction: 2019, operating hours: 2,262 h, load capacity: 1,200 kg, lifting height: 7,900 mm, fuel type: electric, construction height: 3,230 mm, Manufacturer + model: LINDE R 12 B Mast: 3F7900 Psdpfxjyy Az Ds Ampegk ID: 25123.0780 Category: Used Mast: 3F7900 Lowered height: 3230 mm Lifting height: 7900 mm Capacity: 1200 kg Year: 29 Hours: 2262 hours Battery: 48 V / 465 Ah Options: LINDE steering - Dual pedal!!

Condition: like new (used), Year of construction: 2018, operating hours: 714 h, load capacity: 1,200 kg, lifting height: 2,950 mm, fuel type: electric, mast type: duplex, construction height: 1,940 mm, Manufacturer + Model: LINDE L 12 ac (1170) Mast: 2W2950 ID: 25081.2188 Cat.: Demo Mast: 2W2950 Lowered height: 1940 mm Lifting height: 2950 mm Capacity: 1200 kg Year: 2018 Hours: 714 hours Capacity: 24 V / 440 Ah - GEL Options: VERY unique CONTRA stacker!!! Equipped with: - Mast with tilt function - Freely adjustable forklift forks - Suitable for all types of pallets Pgodpfxoyy Av Ue Ampek - Power steering!

Condition: like new (used), Year of construction: 2017, operating hours: 2,902 h, load capacity: 1,200 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,440 mm, Manufacturer + model: LINDE R 12 B Mast: 3F5400 ID: 25032.5126 Category: Used Mast: 3F5400 Lowered height: 2440 mm Lifting height: 5400 mm Capacity: 1200 kg Year: 27 Operating hours: 2902 hours Pedpfjyy Arvsx Ampsgk Battery capacity: 48 V / 620 Ah Options LINDE steering – dual pedal!!

Condition: like new (used), Year of construction: 2017, operating hours: 3,813 h, load capacity: 1,200 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, Manufacturer + model:LINDE R 12 B Mast:3F4500 ID:25024.71 Cat.:Used Mast:3F Lowered height:2120 mm Lifting height:4500mm Capacity:1200 kg Year:27 Hours:3813 hours Podpfx Amoyy Arpspjgk Capacity:48v / 465ah

Condition: used, mileage: 420,232 km, power: 157 kW (213.46 HP), first registration: 05/2017, fuel type: diesel, tire size: 265 / 70 / R19.5, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 6, suspension: steel-air, number of seats: 2, total length: 9,090 mm, total width: 2,550 mm, total height: 3,850 mm, permissible axle load (axle 1): 5,000 kg, permissible axle load (axle 2): 9,440 kg, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 2,560 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, tail-lift, Technical information Number of cylinders: 4 Engine capacity: 4.500 cc Transmission Transmission: ZF, 6 gears, Automatic Axle configuration Tyre size: 265 / 70 / R19.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 5000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 9440 kg; Tyre profile left inner: 20%; Tyre profile left outer: 20%; Tyre profile right outer: 20%; Tyre profile right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 6.390 kg Carrying capacity: 5.600 kg GVW: 11.990 kg Functional Tail lift: Dhollandia DHSM.20, slider lift, 1500 kg Make of bodywork: van Bekkum Carrosserie Curtainside / Schuifzeil / Pritsch - Plane Sliding roof: Yes Pgsdpfoyx Swrsx Ampjk Interior Interior: grey Environment Emission class: Euro 6c Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Armrest - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spoilers - Stability control - Toolbox - Visor

Condition: used, functionality: fully functional, Year of construction: 2023, Feco Trench Cutter TR-12 — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Pgodey A E Irspfx Ampek - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 4,500 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2016, condition: good (used), In use since 2017 (approx. 9000 operating hours) Grapple bowl capacity: 1.0 sqm Grapple dead weight: 1,540 kg Pedpfxsktk Dzo Ampogk Gear rim - axial load rotatable: 15 Mp. endl. Gear rim rotary motor: 3000 N/m can be inspected in advance in Schwarzach

Condition: used, Year of construction: 2010, - Brand: Genie - Type : GS3246 - Year of construction: 2010 - Weight: 2791 kg. - Hours: 620 hours - Drive: Battery - Working height: 12 meters: Pgodpfx Ameyyyxtspsk - Lifting capacity: 317 kg. - Safety inspection until 10-2026 - Video on our website - Trade-in and transport possible * Brand: Genius *Type: GS3246 * Construction year: 2010 * Weight: 2791 kg. * Hours: 620 uur * Working height: 12 meters * Drive: Battery * Lifting capacity: 317 kg.

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Pgjdpsyyqm Iofx Ampek Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Hori...

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, power: 12 kW (16.32 HP), warranty duration: 24 months, Equipment: safety light barrier, DURMA HD-FN 3015 fiber laser cutting system: The ideal price-performance solution. The DURMA HD-FN 3015 fiber laser cutting system is the best choice for companies looking for maximum performance and efficiency at an unbeatable price. This state-of-the-art system combines innovative technology with user-friendly operation, offering outstanding benefits for metalworking. Technical specifications Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Mild steel: 30 mm Stainless steel: 25 mm Pgodpfx Amsu E Tczepsk Aluminum: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Movement axes: X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Metal sheets Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 240 kg/m² Speed and precision: Maximum speed X-axis: 100 m/min Maximum Y-axis speed: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeat accuracy: ± 0.05 mm Main features of the system: ・Changing table: Positioned lengthwise for best access to loading and unloading systems. ・Enclosed cutting chamber: Equipped with protective glazing for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting processes. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimum material utilization. ・Positioning laser: Supports the exact positioning of workpieces. ・Sheet metal check system: Automatic detection of the sheet metal position and dimensions for improved process reliability. ・Automatic nozzle cleaning: Ensures continuous cutting quality. ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. ・Multi-chamber extraction system: Effective removal of smoke and particles. ・Light barrier protection: Ensures safety when changing tables. ・Remote maintenance access: Facilitates remote diagnosis and maintenance.